summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/mvsas (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] mv_sas: OCZ RevoDrive3 & zDrive R4 supportRobin H. Johnson2011-10-311-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the OCZ RevoDrive3/zDrive R4 series, the "OCZ SuperScale Storage Controller" with "Virtualized Controller Architecture 2.0" really seems to be a Marvell 88SE9485 part, with OCZ firmware/BIOS. Developed and tested on OCZ RevoDrive3 120GB [PCI 1b85:1021] Should work on: - OCZ RevoDrive3 (2x SandForce 2281) - OCZ RevoDrive3 X2 (4x SandForce 2281) - OCZ zDrive R4 CM84 (4x SandForce 2281) - OCZ zDrive R4 CM88 (8x SandForce 2281) - OCZ zDrive R4 RM84 (4x SandForce 2582) - OCZ zDrive R4 RM88 (8x SandForce 2582) All of this because a friend recently bought a OCZ RevoDrive3 and was bitten by the lack of Linux support. Notes from testing: ------------------- - SMART works. - VPD Device Identification is "OCZ-REVODRIVE3" - Thin provisioning/TRIM seems to be implemented as WRITE SAME UNMAP, with deterministic (non-zero) read after TRIM, but I'm not sure if it works 100% in my testing. - Some of the tuning in the firmware seems to ensure much better performance when in a RAID0 setup than using the two devices seperately. I have not tested booting from the SSD, because all of this was developed and tested remotely from the actual hardware. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Thanks-To: Gordon Pritchard <gordp@sfu.ca> Acked-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2011-10-295-65/+68
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
| * [SCSI] isci: export phy events via ->lldd_control_phy()Dan Williams2011-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow the sas-transport-class to update events for local phys via a new PHY_FUNC_GET_EVENTS command to ->lldd_control_phy(). Fixup drivers that are not prepared for new enum phy_func values, and unify ->lldd_control_phy() error codes. These are the SAS defined phy events that are reported in a smp-report-phy-error-log command: * /sys/class/sas_phy/<phyX>/invalid_dword_count * /sys/class/sas_phy/<phyX>/running_disparity_error_count * /sys/class/sas_phy/<phyX>/loss_of_dword_sync_count * /sys/class/sas_phy/<phyX>/phy_reset_problem_count Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: update driver versionXiangliang Yu2011-10-021-1/+1
| | | | | | | | | | | | | | This will synchronize the version string with internal driver. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: fixed SMP request watchdog timeout issue.Xiangliang Yu2011-10-022-0/+5
| | | | | | | | | | | | | | set SMP link timeout value to maximum. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: expander write performance enhancementXiangliang Yu2011-10-022-0/+10
| | | | | | | | | | | | | | | | with 1 expander, connect 8 HDD, the write performance will be improved by 80%. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: change SL mode0 register valueXiangliang Yu2011-10-021-0/+8
| | | | | | | | | | | | | | | | | | -- change connection behavior -- set bit8 to 1 for performance tuning -- set bit0 to 0 to enable retry for no_dest reject case. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: fixed wrong destination when hiting NAK for command frameXiangliang Yu2011-10-021-0/+10
| | | | | | | | | | | | | | disable non data frame retry Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: fixed some disk spin up issueXiangliang Yu2011-10-022-0/+16
| | | | | | | | | | | | | | spin up issue: some direct attached SAS device can't spin up Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: add support for 9480 device idXiangliang Yu2011-10-021-0/+9
| | | | | | | | | | | | | | Add support for Marvell 88SE9480 SAS/SATA HBA Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: fix expander link errorXiangliang Yu2011-10-021-3/+3
| | | | | | | | | | | | | | Expanders fail to link when the phy rates are mismatched. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: remove mvs_slave_{alloc|configure}Dan Williams2011-10-023-34/+2
| | | | | | | | | | | | | | | | | | | | | | | | libsas now handles: 1/ limiting ata scanning to lun0 2/ maximizing the queue_depth of sas devices (up to 256, mvsas only supports 64) 3/ changes to /sys/block/<sdX>/device/queue_depth for ata devices Acked-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] libsas: export sas_alloc_task()Dan Williams2011-08-271-26/+3
| | | | | | | | | | | | | | | | | | Now that isci has added a 3rd open coded user of this functionality just share the libsas version. Acked-by: Jack Wang <jack_wang@usish.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | Merge branch 'master' into for-nextJiri Kosina2011-09-159-484/+975
|\| | | | | | | | | Fast-forward merge with Linus to be able to merge patches based on more recent version of the tree.
| * [SCSI] mvsas: Add support for interrupt taskletXiangliang Yu2011-07-265-26/+40
| | | | | | | | | | | | | | | | | | Add support for interrupt tasklet, which will improve performance. Correct spelling of "20011" [jejb: simplified ifdefs and fixed unused variable problem] Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: update commentsXiangliang Yu2011-07-267-55/+24
| | | | | | | | | | | | | | Remove obsolete comments and add new comments Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: misc improvementsXiangliang Yu2011-07-267-113/+127
| | | | | | | | | | | | | | | | | | | | | | Change code to match HBA datasheet. Change code to make it readable. Add support big endian for mvs_prd_imt. Add cpu_to_le32 and cpu_to_le64 to use on addr. Add scan_finished for structure mvs_prv_info. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: Add new macros and functionsXiangliang Yu2011-07-267-56/+169
| | | | | | | | | | | | | | | | | | | | | | | | Add new macros: MVS_SOFT_RESET, MVS_HARD_RESET, MVS_PHY_TUNE, MVS_COMMAND_ACTIVE, EXP_BRCT_CHG, MVS_MAX_SG Add new member sg_width in struct mvs_chip_info Use macros rather than magic number Add new functions: mvs_fill_ssp_resp_iu, mvs_set_sense, mvs_94xx_clear_srs_irq, mvs_94xx_phy_set_link_rate Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: Remove unused macros, variables and functionsXiangliang Yu2011-07-267-189/+20
| | | | | | | | | | | | | | | | | | | | | | Remove unused macros: VSR_PHY_VS0, VSR_PHY_VS1, MVS_SLOTS, MVS_CAN_QUEUE, MVS_MSI, SG_MX, _MV_DUMP, MV_DISABLE_NCQ Remove unused variables for mvs_info: irq, exp_req, cmd_size Remove unused functions: mvs_get_sas_addr, mvs_hexdump, mvs_hba_sb_dump, mvs_hab_memory_dump, mvs_hba_cq_dump Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: fix 94xx hotplug issueXiangliang Yu2011-07-265-35/+42
| | | | | | | | | | | | | | | | Fix 94xx A0/B0 revision hotplug issue. Remove unused macro: DISABLE_HOTPLUG_DMA_FIX Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: Add driver version and interrupt coalescing to device ↵Xiangliang Yu2011-07-264-2/+126
| | | | | | | | | | | | | | attributes in sysfs Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: add support for 94xx phy tuning and multiple revisionsXiangliang Yu2011-07-264-14/+382
| | | | | | | | | | | | | | | | Add 94xx phy tuning to aid manufacturing. Add support for 94xx multiple revisions: A0, B0, C0, C1, C2. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
| * [SCSI] mvsas: Add support for Non specific NCQ error interruptXiangliang Yu2011-07-266-1/+52
| | | | | | | | | | Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | Remove unneeded version.h includes from drivers/scsi/Jesper Juhl2011-09-151-1/+0
|/ | | | | | | | | It was pointed out by 'make versioncheck' that some includes of linux/version.h are not needed in drivers/scsi/. This patch removes them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] mvsas: add support for Task collector mode and fixed relative bugsXiangliang Yu2011-05-0111-152/+294
| | | | | | | | | | | | | 1. Add support for Task collector mode. 2. Fixed relative collector mode bug: - I/O failed when disks is on two ports - system hang when hotplug disk - system hang when unplug disk during run IO 3. Unlock ap->lock within .lldd_execute_task for direct mode to improve performance Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mvsas: add support for Marvell 88SE9445/88SE9485Xiangliang Yu2011-05-012-0/+22
| | | | | | | | This is support for Marvell 88SE9445/88SE9485 SAS/SATA HBA, which is based on Marvell 88SE9480. Signed-off-by: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mvsas: Add support for HighPoint RR27xx series HBAHighPoint Linux Team2011-03-231-0/+7
| | | | | | | | This patch is to add support for HighPoint RR27xx SAS/SATA HBA which is based on Marvell 88SE9480 chipset. Signed-off-by: HighPoint Linux Team <linux@highpoint-tech.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* scsi: change to new flag variablematt mooney2011-03-171-3/+1
| | | | | | | | Replace EXTRA_CFLAGS with ccflags-y. Signed-off-by: matt mooney <mfm@muteddisk.com> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>
* [SCSI] Unify SAM_ and SAM_STAT_ macrosJames Bottomley2010-07-281-8/+8
| | | | | | | | | | | We have two separate definitions for identical constants with nearly the same name. One comes from the generic headers in scsi.h; the other is an enum in libsas.h ... it's causing confusion about which one is correct (fortunately they both are). Fix this by eliminating the libsas.h duplicate Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mvsas: fix potential NULL dereferenceJiri Slaby2010-07-271-1/+3
| | | | | | | | Stanse found that in mvs_abort_task, mvi_dev is dereferenced earlier than tested for being NULL. Move the assignment below the test. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mvsas: fix hot plug handling and IO issuesSrinivas2010-04-115-80/+186
| | | | | | | | | | | | | | | | | | | | | This patch adds a bunch of fixes 1. Reduce sg table size to 64 (SG_MX) instead of default SG_ALL 2. clear task lists on phy down events 3. release all tasks on port deformation 4. release current task for device gone notification 5. Add sata abort handing 6. Add 10ms delay to each port reset (currently done serially and with interrupts disabled) [jejb: whitespace fixes and clean ups plus added description added dummy 94xx_clear_srs_irq function just to prevent the mismatch in the mvs_dispatch structure killing 94xx cards] Signed-off-by: Srinivas <satyasrinivasp@hcl.in> Cc: Andy Yan <ayan@marvell.com> Cc: qswang@marvell.com Cc: jfeng@marvell.com Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [SCSI] mvsas: add support for Adaptec ASC-1045/1405 SAS/SATA HBASrinivas2009-12-101-0/+1
| | | | | | | | | This is support for Adaptec ASC-1045/1405 SAS/SATA HBA on mvsas, which is based on Marvell 88SE6440 chipset. Signed-off-by: Srinivas <satyasrinivasp@hcl.in> Cc: Andy Yan <ayan@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mvsas: Support Areca SAS/SATA HBA, ARC-1300/1320Nick Cheng2009-10-022-0/+8
| | | | | | | | | This is support for Areca SAS/SATA HBA, ARC-1300/1320, which quipped with 88SE6440/88SE9480 respectively. Signed-off-by: Nick Cheng< nick.cheng@areca.com.tw > Cc: Ke Wei <kewei.mv@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] mvsas: remove all the casts from void * or to void *Andy Yan2009-05-231-18/+16
| | | | | | | Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mvsas: performance improvement using domain_device->lldd_devAndy Yan2009-05-232-16/+16
| | | | | | | | | | Using sticky field to improve retrieve performance by eliminating some lookups in . Remove some spurious casts. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mvsas: correct bit map usageAndy Yan2009-05-231-2/+1
| | | | | | | | | Utilize DECLARE_BITMAP to define the tags array. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mvsas: bug fix, null pointer may be usedAndy Yan2009-05-231-4/+4
| | | | | | | | | Null pointer check to avoid corruption. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mvsas: bug fix of dead lockAndy Yan2009-05-231-8/+6
| | | | | | | | | | TMF task should be issued with Interrupt Disabled, or Deadlock may take place. Clean-up unused parameters and conditonal lock. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mvsas: bug fix with setting task management frame typeAndy Yan2009-05-231-3/+5
| | | | | | | | | Correct frame type setting according to parameter. Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mvsas: add support for 94xx; layout change; bug fixesAndy Yan2009-05-2111-1377/+3893
| | | | | | | | | | | | | | | | | | This version contains following main changes - Switch to new layout to support more types of ASIC. - SSP TMF supported and related Error Handing enhanced. - Support flash feature with delay 2*HZ when PHY changed. - Support Marvell 94xx series ASIC for 6G SAS/SATA, which has 2 88SE64xx chips but any different register description. - Support SPI flash for HBA-related configuration info. - Other patch enhanced from kernel side such as increasing PHY type [jejb: fold back in DMA_BIT_MASK changes] Signed-off-by: Ying Chu <jasonchu@marvell.com> Signed-off-by: Andy Yan <ayan@marvell.com> Signed-off-by: Ke Wei <kewei@marvell.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mvsas: split driver into multiple filesJeff Garzik2009-05-218-2112/+2273
| | | | | | | | Split mvsas driver into multiple source codes, based on the split and function distribution found in Marvell's mvsas update. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] mvsas: move into new directory drivers/scsi/mvsas/Jeff Garzik2009-05-213-0/+3283
Zero functional changes, just file movement. This commit prepares for the upcoming integration of the Marvell-provided driver update that splits the driver into support for both 64xx and 94xx chip families. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 02:15:35 +0100