summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/pm8001/pm8001_hwi.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* scsi: pm8001: Remove PM8001_USE_MSIXDamien Le Moal2023-09-221-16/+16
| | | | | | | | | | | | | | | | | | | | The pm8001 driver does not compile if PM8001_USE_MSIX is not defined in pm8001_sas.h because various fields and functions conditionally defined are used unconditionally without a "#ifdef PM8001_USE_MSIX" protection. This macro is rather useless anyway and not convenient as diabling MSI-X use requires recompiling the driver. Remove this macro and replace it with the bool module parameter "use_msix" which defaults to true. The use of MSI-X interrupts for an adapter is gated by this module parameter for adapters that actually support MSI-X. The "use_msix" boolean field is added to struct pm8001_hba_info and all code defined depending on PM8001_USE_MSIX is modified to rely on pm8001_hba_info->use_msix instead. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230911232745.325149-9-dlemoal@kernel.org Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Simplify pm8001_chip_interrupt_enable/disable()Damien Le Moal2023-09-221-63/+6
| | | | | | | | | | | | | | | | pm8001_chip_msix_interrupt_enable() and pm8001_chip_msix_interrupt_disable() are always cold with the vector argument equal to 0. This allows simplifying the code for these functions. With this change, the functions are simple enough and can be removed by open coding them directly in pm8001_chip_interrupt_enable() and pm8001_chip_interrupt_disable(). Also do the same for the functions pm8001_chip_intx_interrupt_enable() and pm8001_chip_intx_interrupt_disable() and remove these functions. Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20230911232745.325149-7-dlemoal@kernel.org Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Use phy-specific SAS address when sending PHY_START commandMichal Grzedzicki2023-09-141-1/+1
| | | | | | | | | | | Some cards have more than one SAS address. Using an incorrect address causes communication issues with some devices like expanders. Closes: https://lore.kernel.org/linux-kernel/A57AEA84-5CA0-403E-8053-106033C73C70@fb.com/ Signed-off-by: Michal Grzedzicki <mge@meta.com> Link: https://lore.kernel.org/r/20230913155611.3183612-1-mge@meta.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge patch series "libsas: Some tidy-up"Martin K. Petersen2023-08-251-3/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | John Garry <john.g.garry@oracle.com> says: This series tidies-up libsas a bit, including: - delete structure(s) with only one member - delete structure members which are only ever set - delete structure members which are never set and code which relies on that member being set This conflicts with the following series: https://lore.kernel.org/linux-scsi/20230809132249.37948-1-yuehaibing@huawei.com/ Any conflict should be trivial to resolve. Based on mkp-scsi staging at a18e81d17a7e ("scsi: ufs: ufs-pci: Add support for QEMU") Link: https://lore.kernel.org/r/20230815115156.343535-1-john.g.garry@oracle.com Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Delete sas_ssp_task.task_prioJohn Garry2023-08-211-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Since libsas was introduced in commit 2908d778ab3e ("[SCSI] aic94xx: new driver"), sas_ssp_task.task_prio is never set, so delete it and any references which depend on it being set (all of them). Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-8-john.g.garry@oracle.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: libsas: Delete sas_ssp_task.enable_first_burstJohn Garry2023-08-211-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Since libsas was introduced in commit 2908d778ab3e ("[SCSI] aic94xx: new driver"), sas_ssp_task.enable_first_burst is never set, so delete it and any references. Signed-off-by: John Garry <john.g.garry@oracle.com> Link: https://lore.kernel.org/r/20230815115156.343535-7-john.g.garry@oracle.com Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: pm80xx: Set RETFIS when requested by libsasIgor Pylypiv2023-08-211-3/+6
|/ | | | | | | | | | | | By default PM80xx HBAs return FIS only when a drive reports an error. The RETFIS bit forces the controller to populate FIS even when a drive reports no error. Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Link: https://lore.kernel.org/r/20230819213040.1101044-3-ipylypiv@google.com Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Log device registrationAkshat Jain2023-04-251-3/+4
| | | | | | | | | | Log combination of phy_id and device_id in device registration response. Signed-off-by: Akshat Jain <akshatzen@google.com> Signed-off-by: Pranav Prasad <pranavpp@google.com> Link: https://lore.kernel.org/r/20230411230650.1760757-1-pranavpp@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Use sas_ata_device_link_abort() to handle NCQ errorsJohn Garry2022-10-181-158/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") the driver had support added to handle NCQ errors but much of what is done in this handling is duplicated from the libata EH. In that named commit we handle in 2x main steps: a. Issue read log ext10 to examine and clear the errors b. Issue SATA_ABORT all command Indeed, in libata EH, we do similar to above: a. ata_do_eh() -> ata_eh_autopsy() -> ata_eh_link_autopsy() -> ata_eh_analyze_ncq_error() -> ata_eh_read_log_10h() b. ata_do_eh() -> ata_eh_recover() which will issue a device soft reset or hard reset Since there is so much duplication, use sas_ata_device_link_abort() which will abort all pending IOs and kick of ATA EH which will do the steps, above. However we will not follow the advisory to send the SATA_ABORT all command after the autopsy in read log ext10. Indeed, in libsas EH, we already send a per-task SATA_ABORT command, and this is prior to the ATA EH kicking in and issuing the read log ext10 in the recovery process. I judge that this is ok as the SATA_ABORT command does not actually send any protocol on the link to abort I/O on the other side, so would not change any state on the disk (for the read log ext10 command). Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-7-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Modify task abort handling for SATA taskJohn Garry2022-10-181-2/+13
| | | | | | | | | | | | | | | When we try to abort a SATA task, the CCB of the task which we are trying to avoid may still complete. In this case, we should not touch the task associated with that CCB as we can race with libsas freeing the last later in sas_eh_handle_sas_errors() -> sas_eh_finish_cmd() for when TASK_IS_ABORTED is returned from sas_scsi_find_task() Signed-off-by: John Garry <john.garry@huawei.com> Link: https://lore.kernel.org/r/1665998435-199946-6-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Tested-by: Niklas Cassel <niklas.cassel@wdc.com> # pm80xx Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix running_req for internal abort commandsJohn Garry2022-09-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp(). Link: https://lore.kernel.org/r/1663854664-76165-1-git-send-email-john.garry@huawei.com Fixes: 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2022-08-131-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more SCSI updates from James Bottomley: "Mostly small bug fixes and trivial updates. The major new core update is a change to the way device, target and host reference counting is done to try to make it more robust (this change has soaked for a while to try to winkle out any bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: pm8001: Fix typo 'the the' in comment scsi: megaraid_sas: Remove redundant variable cmd_type scsi: FlashPoint: Remove redundant variable bm_int_st scsi: zfcp: Fix missing auto port scan and thus missing target ports scsi: core: Call blk_mq_free_tag_set() earlier scsi: core: Simplify LLD module reference counting scsi: core: Make sure that hosts outlive targets scsi: core: Make sure that targets outlive devices scsi: ufs: ufs-pci: Correct check for RESET DSM scsi: target: core: De-RCU of se_lun and se_lun acl scsi: target: core: Fix race during ACL removal scsi: ufs: core: Correct ufshcd_shutdown() flow scsi: ufs: core: Increase the maximum data buffer size scsi: lpfc: Check the return value of alloc_workqueue()
| * scsi: pm8001: Fix typo 'the the' in commentSlark Xiao2022-08-021-1/+1
| | | | | | | | | | | | | | | | | | Replace 'the the' with 'the' in the comment. Link: https://lore.kernel.org/r/20220722094612.78583-1-slark_xiao@163.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2022-08-051-0/+5
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi, mpi3mr). The main driver change that might cause issues on down the road is the conversion of some of our oldest surviving drivers to the DMA API (should only affect m68k). The only major core change is the rework of async resume; the rest are either completely trivial or for updating deprecated APIs" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits) scsi: target: Remove XDWRITEREAD emulated support scsi: megaraid: Remove the static variable initialisation scsi: ch: Do not initialise statics to 0 scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot" scsi: target: iscsi: Do not require target authentication scsi: target: iscsi: Allow AuthMethod=None scsi: target: iscsi: Support base64 in CHAP scsi: target: iscsi: Add support for extended CDB AHS scsi: ufs: dt-bindings: Add SC8280XP binding scsi: target: iscsi: Fix clang -Wformat warnings scsi: ufs: core: Read device property for ref clock scsi: libsas: Resume SAS host for phy reset or enable via sysfs scsi: hisi_sas: Modify v3 HW SATA completion error processing scsi: hisi_sas: Relocate DMA unmap of SMP task scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw() scsi: mpi3mr: Delete a stray tab scsi: mpi3mr: Unlock on error path scsi: mpi3mr: Reduce VD queue depth on detecting throttling scsi: mpi3mr: Resource Based Metering ...
| * scsi: pm8001: Set up tags before using themJohn Garry2022-06-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code is buggy in that the tags are set up after they are needed in pm80xx_chip_init() -> pm80xx_set_sas_protocol_timer_config(). The tag depth is earlier read in pm80xx_chip_init() -> read_main_config_table(). Add a post init callback to do the pm80xx work which needs to be done after reading the tags. I don't see a better way to do this. Link: https://lore.kernel.org/r/1654879602-33497-3-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: pm80xx: Fix 'Unknown' max/min linkrateChangyuan Lyu2022-07-141-16/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the data flow of the max/min linkrate in the driver is * in pm8001_get_lrate_mode(): hardcoded value ==> struct sas_phy * in pm8001_bytes_dmaed(): struct pm8001_phy ==> struct sas_phy * in pm8001_phy_control(): libsas data ==> struct pm8001_phy Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), and the fields in struct pm8001_phy are not initialized, sysfs `/sys/class/sas_phy/phy-*/maximum_linkrate` always shows `Unknown`. To fix the issue, change the dataflow to the following: * in pm8001_phy_init(): initial value ==> struct pm8001_phy * in pm8001_get_lrate_mode(): struct pm8001_phy ==> struct sas_phy * in pm8001_phy_control(): libsas data ==> struct pm8001_phy For negotiated linkrate, the current dataflow is: * in pm8001_get_lrate_mode(): iomb data ==> struct asd_sas_phy ==> struct sas_phy * in pm8001_bytes_dmaed(): struct asd_sas_phy ==> struct sas_phy Since pm8001_bytes_dmaed() follows pm8001_get_lrate_mode(), the assignment statements in pm8001_bytes_dmaed() are unnecessary and cleaned up. Link: https://lore.kernel.org/r/20220707175210.528858-1-changyuanl@google.com Reviewed-by: Igor Pylypiv <ipylypiv@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Changyuan Lyu <changyuanl@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Use libsas internal abort supportJohn Garry2022-03-151-10/+17
| | | | | | | | | | | New special handling is added for SAS_PROTOCOL_INTERNAL_ABORT proto so that we may use the common queue command API. Link: https://lore.kernel.org/r/1647001432-239276-4-git-send-email-john.garry@huawei.com Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Improve pm80XX_send_abort_all()Damien Le Moal2022-02-231-10/+4
| | | | | | | | | | | | | | Both pm8001_send_abort_all() and pm80xx_send_abort_all() are called only for a non null device with the NCQ_READ_LOG_FLAG set, so remove the device check on entry of these functions. Furthermore, setting the NCQ_ABORT_ALL_FLAG device id flag and clearing the NCQ_READ_LOG_FLAG is always done before calling these functions. Move these operations inside the functions. Link: https://lore.kernel.org/r/20220220031810.738362-31-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Simplify pm8001_ccb_task_free()Damien Le Moal2022-02-231-23/+19
| | | | | | | | | | | | | | The task argument of the pm8001_ccb_task_free() function can be inferred from the ccb argument ccb_task field. So there is no need to have this argument. Likewise, the ccb_index argument is always equal to the ccb tag field and is not needed either. Remove both arguments and update all call sites. The pm8001_ccb_task_free_done() helper is also modified to match this change. Link: https://lore.kernel.org/r/20220220031810.738362-30-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Simplify pm8001_mpi_build_cmd() interfaceDamien Le Moal2022-02-231-98/+56
| | | | | | | | | | | | | | | | There is no need to pass a pointer to a struct inbound_queue_table to pm8001_mpi_build_cmd(). Passing the start index in the inbound queue table of the adapter is enough. This change allows avoiding the declaration of a struct inbound_queue_table pointer (circularQ variables) in many functions, simplifying the code. While at it, blank lines are added i(e.g. after local variable declarations) to make the code more readable. Link: https://lore.kernel.org/r/20220220031810.738362-28-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Introduce ccb alloc/free helpersDamien Le Moal2022-02-231-104/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce the pm8001_ccb_alloc() and pm8001_ccb_free() helpers to replace the typical code patterns: res = pm8001_tag_alloc(pm8001_ha, &ccb_tag); if (res) ... ccb = &pm8001_ha->ccb_info[ccb_tag]; ccb->device = pm8001_ha_dev; ccb->ccb_tag = ccb_tag; ccb->task = task; ccb->n_elem = 0; and ccb->task = NULL; ccb->ccb_tag = PM8001_INVALID_TAG; pm8001_tag_free(pm8001_ha, tag); With the simpler function calls: ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task); if (!ccb) ... and pm8001_ccb_free(pm8001_ha, ccb); The pm8001_ccb_alloc() helper ensures that all fields of the ccb info structure for the newly allocated tag are all initialized, except the buf_prd field. The pm8001_ccb_free() helper clears the initialized fields and the ccb tag to ensure that iteration over the adapter ccb_info array detects ccbs that are in use. All call site of the pm8001_tag_alloc() function that use a ccb info associated with an allocated tag are converted to use the new helpers. Link: https://lore.kernel.org/r/20220220031810.738362-27-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()Damien Le Moal2022-02-231-1/+3
| | | | | | | | | | | In pm8001_chip_fw_flash_update_build(), if pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex allocated must be freed. Link: https://lore.kernel.org/r/20220220031810.738362-23-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix tag leaks on errorDamien Le Moal2022-02-231-0/+9
| | | | | | | | | | | | | | | | In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(), pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd() fails. Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort method fails, the tag allocated for the abort request task must be freed. Add the missing call to pm8001_tag_free(). Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix task leak in pm8001_send_abort_all()Damien Le Moal2022-02-231-3/+6
| | | | | | | | | | In pm8001_send_abort_all(), make sure to free the allocated sas task if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail. Link: https://lore.kernel.org/r/20220220031810.738362-21-damien.lemoal@opensource.wdc.com Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix tag values handlingDamien Le Moal2022-02-231-34/+18
| | | | | | | | | | | | | | | | | | The function pm8001_tag_alloc() determines free tags using the function find_first_zero_bit() which can return 0 when the first bit of the bitmap being inspected is 0. As such, tag 0 is a valid tag value that should not be dismissed as invalid. Fix the functions pm8001_work_fn(), mpi_sata_completion(), pm8001_mpi_task_abort_resp() and pm8001_open_reject_retry() to not dismiss 0 tags as invalid. The value 0xffffffff is used for invalid tags for unused ccb information structures. Add the macro definition PM8001_INVALID_TAG to define this value. Link: https://lore.kernel.org/r/20220220031810.738362-20-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix pm8001_mpi_task_abort_resp()Damien Le Moal2022-02-231-4/+3
| | | | | | | | | | | | The call to pm8001_ccb_task_free() at the end of pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again. Also change the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be. Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix abort all task initializationDamien Le Moal2022-02-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In pm80xx_send_abort_all(), the n_elem field of the ccb used is not initialized to 0. This missing initialization sometimes lead to the task completion path seeing the ccb with a non-zero n_elem resulting in the execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(), causing a crash such as: [ 197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280 [ 197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012 [ 197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0 [ 197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0 [ 197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b [ 197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000 [ 197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000 [ 197.741493] FS: 0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000 [ 197.749659] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0 [ 197.762656] Call Trace: [ 197.765127] <IRQ> [ 197.767162] pm8001_ccb_task_free+0x5f1/0x820 [pm80xx] [ 197.772364] ? do_raw_spin_unlock+0x54/0x220 [ 197.776680] pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx] [ 197.782406] process_oq+0xe85/0x7890 [pm80xx] [ 197.786817] ? lock_acquire+0x194/0x490 [ 197.790697] ? handle_irq_event+0x10e/0x1b0 [ 197.794920] ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx] [ 197.800378] ? __wake_up_bit+0x100/0x100 [ 197.804340] ? lock_is_held_type+0x98/0x110 [ 197.808565] pm80xx_chip_isr+0x94/0x130 [pm80xx] [ 197.813243] tasklet_action_common.constprop.0+0x24b/0x2f0 [ 197.818785] __do_softirq+0x1b5/0x82d [ 197.822485] ? do_raw_spin_unlock+0x54/0x220 [ 197.826799] __irq_exit_rcu+0x17e/0x1e0 [ 197.830678] irq_exit_rcu+0xa/0x20 [ 197.834114] common_interrupt+0x78/0x90 [ 197.840051] </IRQ> [ 197.844236] <TASK> [ 197.848397] asm_common_interrupt+0x1e/0x40 Avoid this issue by always initializing the ccb n_elem field to 0 in pm8001_send_abort_all(), pm8001_send_read_log() and pm80xx_send_abort_all(). Link: https://lore.kernel.org/r/20220220031810.738362-17-damien.lemoal@opensource.wdc.com Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix NCQ NON DATA command completion handlingDamien Le Moal2022-02-231-1/+2
| | | | | | | | | | | | | | | | | | NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a register-device-to-host-FIS response is expected for it. However, for an IO_SUCCESS case, mpi_sata_completion() expects a set-device-bits-FIS for any ata task with an use_ncq field true, which includes NCQ NON DATA commands. Fix this to correctly treat NCQ NON DATA commands as non-data by also testing for the DMA_NONE DMA direction. Link: https://lore.kernel.org/r/20220220031810.738362-16-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix NCQ NON DATA command task initializationDamien Le Moal2022-02-231-7/+7
| | | | | | | | | | | | | | | | | | | In the pm8001_chip_sata_req() and pm80xx_chip_sata_req() functions, all tasks with a DMA direction of DMA_NONE (no data transfer) are initialized using the ATAP value 0x04. However, NCQ NON DATA commands, while being DMA_NONE commands are NCQ commands and need to be initialized using the value 0x07 for ATAP, similarly to other NCQ commands. Make sure that NCQ NON DATA command tasks are initialized similarly to other NCQ commands by also testing the task "use_ncq" field in addition to the DMA direction. While at it, reorganize the code into a chain of if - else if - else to avoid useless affectations and debug messages. Link: https://lore.kernel.org/r/20220220031810.738362-15-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()Damien Le Moal2022-02-231-1/+1
| | | | | | | | | | | | | | | | The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32. Assigning a value to it should thus use cpu_to_le32(). This fixes the sparse warning: warning: incorrect type in assignment (different base types) expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m got int Link: https://lore.kernel.org/r/20220220031810.738362-7-damien.lemoal@opensource.wdc.com Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Fix command initialization in pm80XX_send_read_log()Damien Le Moal2022-02-231-1/+1
| | | | | | | | | | | | | | | | | | Since the sata_cmd struct is zeroed out before its fields are initialized, there is no need for using "|=" to initialize the ncqtag_atap_dir_m field. Using a standard assignment removes the sparse warning: warning: invalid assignment: |= Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32() to generate the assigned value. Link: https://lore.kernel.org/r/20220220031810.738362-5-damien.lemoal@opensource.wdc.com Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes") Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: libsas: Add struct sas_tmf_taskJohn Garry2022-02-191-2/+2
| | | | | | | | | | | | | | | | | | Some of the LLDDs which use libsas have their own definition of a struct to hold TMF info, so add a common struct for libsas. Also add an interim force phy id field for hisi_sas driver, which will be removed once the STP "TMF" code is factored out. Even though some LLDDs (pm8001) use a u32 for the tag, u16 will be adequate, as that named driver only uses tags in range [0, 1024). Link: https://lore.kernel.org/r/1645112566-115804-8-git-send-email-john.garry@huawei.com Tested-by: Yihang Li <liyihang6@hisilicon.com> Tested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge branch '5.17/scsi-fixes' into 5.18/scsi-stagingMartin K. Petersen2022-02-151-17/+0
|\ | | | | | | | | | | | | Pull 5.17 fixes branch into 5.18 tree to resolve a few pm8001 driver merge conflicts. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * scsi: pm80xx: Fix double completion for SATA devicesAjish Koshy2022-01-311-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current code handles completions for SATA devices in mpi_sata_completion() and mpi_sata_event(). However, at the time when any SATA event happens, for almost all the event types, the command is still in the target. It is therefore incorrect to complete the task in sata_event(). There are some events for which we get sata_completions, some need recovery procedure and others abort. All the tasks must be completed via sata_completion() path. Removed the task done related code from sata_events(). For tasks where we don't get completions, let top layer call abort() to abort the command post timeout. Link: https://lore.kernel.org/r/20220124082255.86223-1-Ajish.Koshy@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Co-developed-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: libsas: Drop SAS_TASK_AT_INITIATORJohn Garry2022-02-111-8/+0
|/ | | | | | | | | | | | | | | | | | This flag is now only ever set, so delete it. This also avoids a use-after-free in the pm8001 queue path, as reported in the following: https://lore.kernel.org/linux-scsi/c3cb7228-254e-9584-182b-007ac5e6fe0a@huawei.com/T/#m28c94c6d3ff582ec4a9fa54819180740e8bd4cfb https://lore.kernel.org/linux-scsi/0cc0c435-b4f2-9c76-258d-865ba50a29dd@huawei.com/ [mkp: checkpatch + two SAS_TASK_AT_INITIATOR references] Link: https://lore.kernel.org/r/1644489804-85730-3-git-send-email-john.garry@huawei.com Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Add pm80xx_mpi_build_cmd() tracepointChangyuan Lyu2021-11-191-0/+5
| | | | | | | | | | | | | | pm8001_mpi_build_cmd() prepares and sends all commands to a controller. Having pm80xx_mpi_build_cmd tracepoint can help us with latency issues. this patch depends on patch "scsi: pm80xx: Add tracepoints". Link: https://lore.kernel.org/r/20211115215750.131696-3-changyuanl@google.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Co-developed-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Changyuan Lyu <changyuanl@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Update WARN_ON check in pm8001_mpi_build_cmd()Igor Pylypiv2021-11-191-1/+3
| | | | | | | | | | | | | Starting from commit 05c6c029a44d ("scsi: pm80xx: Increase number of supported queues") driver initializes only max_q_num queues. Do not use an invalid queue if the WARN_ON condition is true. Link: https://lore.kernel.org/r/20211101232825.2350233-4-ipylypiv@google.com Fixes: 7640e1eb8c5d ("scsi: pm80xx: Make mpi_build_cmd locking consistent") Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Do not check the address-of value for NULLIgor Pylypiv2021-11-191-20/+4
| | | | | | | | | | Address-of operator cannot return NULL. Link: https://lore.kernel.org/r/20211101232825.2350233-3-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Fix misleading log statement in pm8001_mpi_get_nvmd_resp()Igor Pylypiv2021-10-051-1/+1
| | | | | | | | | | | | pm8001_mpi_get_nvmd_resp() handles a GET_NVMD_DATA response, not a SET_NVMD_DATA response, as the log statement implies. Fixes: 1f889b58716a ("scsi: pm80xx: Fix pm8001_mpi_get_nvmd_resp() race condition") Link: https://lore.kernel.org/r/20210929025847.646999-1-ipylypiv@google.com Reviewed-by: Changyuan Lyu <changyuanl@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Replace open coded check with dev_is_expander()Igor Pylypiv2021-10-051-2/+1
| | | | | | | | | | | This is a follow up cleanup to the commit 924a3541eab0 ("scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()") Link: https://lore.kernel.org/r/20210929025807.646589-1-ipylypiv@google.com Reviewed-by: Vishakha Channapattan <vishakhavc@google.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Igor Pylypiv <ipylypiv@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Fix incorrect port value when registering a deviceAjish Koshy2021-09-151-1/+6
| | | | | | | | | | | | | | | | During phyup event, the firmware provides the phy_id and port_id and driver is supposed to use these during device handle registration. Previously the driver was using the port id value from libsas during device handle registration. Since id can be different from the one assigned by firmware, this can lead to wrong device registration and drives not showing up. Use firmware assigned port id during device registration. Link: https://lore.kernel.org/r/20210906170404.5682-2-Ajish.Koshy@microchip.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Remove redundant initialization of variable 'rv'Colin Ian King2021-08-101-1/+1
| | | | | | | | | | The variable 'rv' is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Link: https://lore.kernel.org/r/20210804143319.115340-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Addresses-Coverity: ("Unused value")
* scsi: pm8001: Clean up kernel-doc and commentsRandy Dunlap2021-07-131-9/+9
| | | | | | | | | | | | | | | | | | | | | | | Fix kernel-doc warnings then test again, wash, rinse, find more, then repeat more/again. Also fix spellos, some grammar, and some punctuation. ../drivers/scsi/pm8001/pm8001_ctl.c:557: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** pm8001_ctl_fatal_log_show - fatal error logging ../drivers/scsi/pm8001/pm8001_ctl.c:577: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** non_fatal_log_show - non fatal error logging ../drivers/scsi/pm8001/pm8001_ctl.c:622: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst ** pm8001_ctl_gsm_log_show - gsm dump collection Link: https://lore.kernel.org/r/20210708165723.8594-1-rdunlap@infradead.org Cc: Jack Wang <jinpu.wang@cloud.ionos.com> Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2021-07-031-8/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (ufs, ibmvfc, megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with elx and mpi3mr being new drivers. The major core change is a rework to drop the status byte handling macros and the old bit shifted definitions and the rest of the updates are minor fixes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits) scsi: aha1740: Avoid over-read of sense buffer scsi: arcmsr: Avoid over-read of sense buffer scsi: ips: Avoid over-read of sense buffer scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe() scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame() scsi: elx: libefc: Fix less than zero comparison of a unsigned int scsi: elx: efct: Fix pointer error checking in debugfs init scsi: elx: efct: Fix is_originator return code type scsi: elx: efct: Fix link error for _bad_cmpxchg scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel() scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session() scsi: elx: efct: Fix error handling in efct_hw_init() scsi: elx: efct: Remove redundant initialization of variable lun scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected" scsi: lpfc: Fix build error in lpfc_scsi.c scsi: target: iscsi: Remove redundant continue statement scsi: qla4xxx: Remove redundant continue statement scsi: ppa: Switch to use module_parport_driver() scsi: imm: Switch to use module_parport_driver() scsi: mpt3sas: Fix error return value in _scsih_expander_add() ...
| * scsi: libsas: Introduce more SAM status code aliases in enum exec_statusBart Van Assche2021-06-021-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch prepares for converting SAM status codes into an enum. Without this patch converting SAM status codes into an enumeration type would trigger complaints about enum type mismatches for the SAS code. Link: https://lore.kernel.org/r/20210524025457.11299-2-bvanassche@acm.org Cc: Hannes Reinecke <hare@suse.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | scsi: pm80xx: Fix drives missing during rmmod/insmod loopAjish Koshy2021-05-161-4/+6
|/ | | | | | | | | | | | | | | | | | | | | When driver is loaded after rmmod some drives are not showing up during discovery. SATA drives are directly attached to the controller connected phys. During device discovery, the IDENTIFY command (qc timeout (cmd 0xec)) is timing out during revalidation. This will trigger abort from host side and controller successfully aborts the command and returns success. Post this successful abort response ATA library decides to mark the disk as NODEV. To overcome this, inside pm8001_scan_start() after phy_start() call, add get start response and wait for few milliseconds to trigger next phy start. This millisecond delay will give sufficient time for the controller state machine to accept next phy start. Link: https://lore.kernel.org/r/20210505120103.24497-1-ajish.koshy@microchip.com Signed-off-by: Ajish Koshy <ajish.koshy@microchip.com> Signed-off-by: Viswas G <viswas.g@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Reset PI and CI memory during re-initializationViswas G2021-04-161-0/+2
| | | | | | | | | | | | | | Producer index(PI) outbound queue and consumer index(CI) for Outbound queue are in DMA memory. During resume(), the stale PI and CI Values will lead to unexpected behavior. These values should be reset to 0 during driver reinitialization. Link: https://lore.kernel.org/r/20210415103352.3580-8-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Completing pending I/O after fatal errorRuksar Devadi2021-04-161-6/+60
| | | | | | | | | | | | | When controller runs into fatal error, I/Os get stuck with no response, handler event is defined to complete the pending I/Os (SAS task and internal task) and also perform the cleanup for the drives. Link: https://lore.kernel.org/r/20210415103352.3580-7-Viswas.G@microchip.com Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Ruksar Devadi <Ruksar.devadi@microchip.com> Signed-off-by: Viswas G <Viswas.G@microchip.com> Signed-off-by: Ashokkumar N <Ashokkumar.N@microchip.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm8001: Clean up white spaceLuo Jiaxing2021-04-131-7/+7
| | | | | | | | | | | | | | | checkpatch reports the following: ERROR: space prohibited before that ',' (ctx:WxW) +int pm8001_mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb); Remove unnecessary whitespace. Link: https://lore.kernel.org/r/1617886593-36421-2-git-send-email-luojiaxing@huawei.com Acked-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Jianqin Xie <xiejianqin@hisilicon.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: pm80xx: Fix potential infinite loopColin Ian King2021-04-131-1/+1
| | | | | | | | | | | | | | | | | The for-loop iterates with a u8 loop counter i and compares this with the loop upper limit of pm8001_ha->max_q_num which is a u32 type. There is a potential infinite loop if pm8001_ha->max_q_num is larger than the u8 loop counter. Fix this by making the loop counter the same type as pm8001_ha->max_q_num. [mkp: this is purely theoretical, max_q_num is currently limited to 64] Link: https://lore.kernel.org/r/20210407135840.494747-1-colin.king@canonical.com Fixes: 65df7d1986a1 ("scsi: pm80xx: Fix chip initialization failure") Addresses-Coverity: ("Infinite loop") Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 10:08:36 +0100