summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/stex.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* SCSI host lock push-downJeff Garzik2010-11-161-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* [SCSI] stex: fix scan of nonexistent lunEd Lin2010-01-041-0/+5
| | | | | | | | | | | | | | During a manual scan, a user can send command to a nonexistent lun, precisely at the point of max_lun. Normally it's possible (but not required) that the firmware has the knowledge that it is an invalid lun. In the particular case when max_lun is 256, however, the nonexistent lun 256 will be confused with lun 0, because the lun member in a request message is only u8, and 256 will become 0. So we need to fix the problem, at least, at the driver level. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] stex: update version to 4.6.0000.4Ed Lin2009-10-291-4/+4
| | | | | | | Update version to 4.6.0000.4. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] stex: add support for reset request from firmwareEd Lin2009-10-291-83/+166
| | | | | | | | | Add support for reset request from firmware for controllers of st_shasta and st_yel type. Code adjustments necessary for this change are also included. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] stex: add small dma buffer supportEd Lin2009-10-291-5/+20
| | | | | | | | | The controllers of st_seq and st_vsc type can work if only small dma buffer is available, with a reduced firmware feature set. Add support for this case. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] stex: Add reset code for st_yel (v2)Ed Lin2009-09-051-4/+29
| | | | | | | | | | | Add reset related code for st_yel. 1. Set the SS_H2I_INT_RESET bit. 2. Wait for the SS_MU_OPERATIONAL flag. This is also part of normal handshake process so move it to handshake routine. 3. Continue handshake with the firmware. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang2009-04-071-2/+2
| | | | | | | | Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang2009-04-071-2/+2
| | | | | | | | Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] stex: update version to 4.6.0000.3Ed Lin2009-04-031-5/+5
| | | | | Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: add new 6G controller supportEd Lin2009-04-031-31/+351
| | | | | | | This adds the support of a new SAS 6G controller (st_yel) Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: use config struct for parameters of different controllersEd Lin2009-04-031-76/+125
| | | | | | | Use config struct (st_card_info) for parameters of different controllers Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: add MSI supportEd Lin2009-04-031-5/+43
| | | | | | | This adds the MSI support (default 0=off) Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: small code fixes and changesEd Lin2009-04-031-65/+60
| | | | | | | | | | These are some small code fixes and changes, including: - use 64 bit when possible - remove some unnecessary code (in interrupt, queuecommand routine etc.) - code change for reset handler Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: Version updateEd Lin - PTU2009-03-121-3/+3
| | | | | | | Update version to 4.6.0000.1 Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: Small fixesEd Lin - PTU2009-03-121-6/+22
| | | | | | | | | | | | Some small fixes, including: - add data direction in req_msg because new firmware version may require this (backward compatible) - change internal timeout value - change judgment of type st_vsc1 - blank line handling, etc. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: Fix for controller type st_yosemiteEd Lin - PTU2009-03-121-61/+3
| | | | | | | | | | This is the fix for controller type st_yosemite, including - max_lun is 256 (backward compatible) - remove unneeded special handling of INQUIRY - remove unnecessary listing of sub device ids Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: Add new device idEd Lin - PTU2009-03-121-2/+6
| | | | | | | Add new device id for controller type st_seq. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: Fix for potential invalid responseEd Lin - PTU2009-03-121-0/+1
| | | | | | | | | | | The interrupt routine is good for normal cases. However, if the firmware is abnormal and returns an invalid response, the driver may reuse a ccb structure that has already been handled. This may cause problem. Fix this by setting the req member to NULL. Next time we know the response is invalid and handle accordingly if req is NULL. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] advansys, arcmsr, ipr, nsp32, qla1280, stex: use pci_ioremap_bar()Arjan van de Ven2008-12-291-2/+1
| | | | | | | | | | | | | | Use the newly introduced pci_ioremap_bar() function in drivers/scsi. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Matthew Wilcox <willy@linux.intel.com> Cc: Brian King <brking@us.ibm.com> Cc: Ed Lin <ed.lin@promise.com> Cc: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: switch to block timeoutJames Bottomley2008-12-011-1/+1
| | | | | | | | stex sets the timeout in its slave configure routine for all devices. This now needs to update the request queue timeout in block. Cc: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: fix queue depth settingMike Christie2008-07-261-1/+1
| | | | | | | | | We want to set the queue depth to something reasonable - not the can_queue. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: use scsi_build_sense_bufferFUJITA Tomonori2008-04-071-12/+5
| | | | | | Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: use sg buffer copy helper functionsFUJITA Tomonori2008-04-071-56/+10
| | | | | | | | | | This replaces stex_internal_copy with scsi_sg_copy_to/from_buffer. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccbFUJITA Tomonori2008-02-231-4/+6
| | | | | | | | | | | | | | | | | | stex_internal_copy copies an in-kernel buffer to a sg list by using scsi_kmap_atomic_sg. Some functions calls stex_internal_copy with sg_count in struct st_ccb, which is the value that dma_map_sg returned. However it might be shorter than the actual number of sg entries (if the IOMMU merged the sg entries). scsi_kmap_atomic_sg doesn't see sg->dma_length so stex_internal_copy should be called with the actual number of sg entries (i.e. scsi_sg_count), because if the sg entries were merged, stex_direct_copy wrongly think that the data length in the sg list is shorter than the actual length. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] stex: stex_direct_copy shouldn't call dma_map_sgFUJITA Tomonori2008-02-231-22/+12
| | | | | | | | | | | | | | | | | | | | | stex_direct_copy copies an in-kernel buffer to a sg list in order to spoof some SCSI commands. stex_direct_copy calls dma_map_sg and then stex_internal_copy with the value that dma_map_sg returned. It calls scsi_kmap_atomic_sg to copy data. scsi_kmap_atomic_sg doesn't see sg->dma_length so if dma_map_sg merges sg entries, stex_internal_copy gets the smaller number of sg entries than the acutual number, which means it wrongly think that the data length in the sg list is shorter than the actual length. stex_direct_copy shouldn't call dma_map_sg and it doesn't need since this code path doesn't involve dma transfers. This patch removes stex_direct_copy and simply calls stex_internal_copy with the actual number of sg entries. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] remove use_sg_chainingJames Bottomley2008-01-301-1/+0
| | | | | | | | | | | With the sg table code, every SCSI driver is now either chain capable or broken (or has sg_tablesize set so chaining is never activated), so there's no need to have a check in the host template. Also tidy up the code by moving the scatterlist size defines into the SCSI includes and permit the last entry of the scatterlist pools not to be a power of two. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
* [SCSI] add use_sg_chaining option to scsi_host_templateFUJITA Tomonori2007-10-161-0/+1
| | | | | | | | | | This option is true if a low-level driver can support sg chaining. This will be removed eventually when all the drivers are converted to support sg chaining. q->max_phys_segments is set to SCSI_MAX_SG_SEGMENTS if false. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* [SCSI] stex: use resid for xfer len informationEd Lin2007-07-151-2/+2
| | | | | | | | The original implementation in stex_ys_commands() is inappropriate. For xfer len information, we should use resid instead. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Merge up to linux-2.6 headJames Bottomley2007-05-311-36/+54
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/scsi/jazz_esp.c Same changes made by both SCSI and SPARC trees: problem with UTF-8 conversion in the copyright. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] stex: minor cleanup and version updateEd Lin2007-05-161-3/+13
| | | | | | | | | | | | | | | | | | Add debug information into abort and host_reset routine. Change ioremap to ioremap_nocache. Version updated to 3.6.0000.1. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] stex: fix reset recovery for console deviceEd Lin2007-05-161-0/+7
| | | | | | | | | | | | | | | | | | | | | | After reset completed, the scsi error handler sends out TEST_UNIT_READY to the device. For 'normal' devices the command will be handled by firmware. However, because the RAID console only interfaces to scsi mid layer, the firmware will not process the command for it. This will make the console to be offlined right after reset. Add the handling in driver to fix this problem. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] stex: extend hard reset wait timeEd Lin2007-05-161-1/+6
| | | | | | | | | | | | | | | | | | During hard bus reset of st_shasta controllers, 1 ms is not enough for 16-port controllers, although it's good for 8-port controllers. Extend the wait time to 100 ms to allow bus resets finish successfully. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
| * [SCSI] stex: fix id mapping issueEd Lin2007-05-161-32/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The correct internal mapping of stex controllers should be: id:0~15, lun:0~7 (st_shasta) id:0, lun:0~127 (st_yosemite) id:0~127, lun:0 (st_vsc and st_vsc1) This patch reports the internal mapping to scsi mid layer, eliminating the translation between scsi mid layer and firmware. To achieve this goal, we also need to: -- fail the REPORT_LUNS command for st_shasta because the firmware is known to not report all actual luns -- add an entry in scsi_devindo.c to force sequential lun scan (for st_shasta controllers) -- fail the REPORT_LUNS command for console device -- remove special handling of REPORT_LUNS command for st_yosemite, as there is no translation mapping now Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* | [SCSI] stex: convert to use the data buffer accessorsFUJITA Tomonori2007-05-301-73/+36
|/ | | | | | | | | | | - remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [PATCH] remove many unneeded #includes of sched.hTim Schmielau2007-02-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [SCSI] stex: version updateEd Lin2006-12-051-4/+2
| | | | | | | Update version to 3.1.0.1 Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: change wait loop codeEd Lin2006-12-051-21/+20
| | | | | | | | | The original wait loop may be much longer than intended time. Use more accurate timer_after for it. Also adjust wait value to avoid unnecessary long waiting. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: add new device type supportEd Lin2006-12-051-7/+21
| | | | | | | | Add support for st_vsc1 type device (st_vsc is ok because it does not require extra buffer). Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: update device id infoEd Lin2006-12-051-9/+26
| | | | | | | | | | | - add comments for various devices - remove unused device ids(0xf350, 0x4301, 0x8301, 0x8302) - add new device id(0xe350) - fix vendor id of st_vsc - modify Kconfig help info Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: adjust default queue lengthEd Lin2006-12-051-1/+10
| | | | | | | | Firmware of new version may adjust default queue length. It is backward compatible. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: add value check in hard reset routineEd Lin2006-12-051-1/+1
| | | | | | | During hard reset, an all-1 value from PCI_COMMAND should be invalid. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: fix controller_info command handlingEd Lin2006-12-051-0/+1
| | | | | | | | This command needs information from both firmware and driver. First copy information from firmware to buffer, then fill in driver information. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: fix biosparam calculationEd Lin2006-12-051-3/+3
| | | | | | | Fix biosparam calculation. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [SCSI] stex: add new device (id 0x8650) supportEd Lin2006-10-011-30/+164
| | | | | | | | | | | | | A new device (id 0x8650, nickname 'yosemite') support is added. It's basically the same, except for following items: - mapping of id and lun by firmware - special handling for some commands in interrupt routine - change of internal copy function for these special commands - different reset handling code - different shutdown notification command Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: cancel unused field in struct req_msgEd Lin2006-10-011-2/+1
| | | | | | | | | | The payload_sz field in struct req_msg is not big enough to indicate the size of req_msg, as its type is u8. It is confirmed that this field is not used by firmware, so cancel it here. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] add failure return to scsi_init_shared_tag_map()James Bottomley2006-09-021-3/+2
| | | | | | And use it in the stex driver. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] stex: add shared tags from blockEd Lin2006-09-021-120/+57
| | | | | | | | | Use block shared tags entirely within the driver. In the case of shutdown, assume that there are no other outstanding commands, so tag 0 is fine. Signed-off-by: Ed Lin <ed.lin@promise.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
* [SCSI] Add Promise SuperTrak driverJeff Garzik2006-09-021-0/+1316
Add Promise SuperTrak 'stex' driver, supporting SuperTrak EX8350/8300/16350/16300 controllers. The controller's firmware accepts SCSI commands, handing them to the underlying RAID or JBOD disks. The driver consisted of the following cleanups and fixes, beyond its initial submission: Ed Lin: stex: cleanup and minor fixes stex: add new device ids stex: update internal copy code path stex: add hard reset function stex: adjust command timeout in slave_config routine stex: use more efficient method for unload/shutdown flush Jeff Garzik: [SCSI] Add Promise SuperTrak 'shasta' driver. Rename drivers/scsi/shasta.c to stex.c ("SuperTrak EX"). [SCSI] stex: update with community comments from 'Promise SuperTrak' thread [SCSI] stex: Fix warning, trim trailing whitespace. [SCSI] stex: remove last remnants of "shasta" project code name [SCSI] stex: removed 6-byte command emulation [SCSI] stex: minor cleanups [SCSI] stex: minor fixes: irq flag, error return value [SCSI] stex: use dma_alloc_coherent() Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 09:36:04 +0100