summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/ufs/ufs-qcom.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* scsi: ufs-qcom: Add reset control support for host controllerCan Guo2019-11-191-0/+53
| | | | | | | | | | Add reset control for host controller so that host controller can be reset as required in its power up sequence. Link: https://lore.kernel.org/r/1573798172-20534-3-git-send-email-cang@codeaurora.org Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Can Guo <cang@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: Implement device_reset vopsBjorn Andersson2019-09-071-0/+36
| | | | | | | | | | | | | | | The UFS_RESET pin on Qualcomm SoCs are controlled by TLMM and exposed through the GPIO framework. Acquire the device-reset GPIO and use this to implement the device_reset vops, to allow resetting the attached memory. Based on downstream support implemented by Subhash Jadavani <subhashj@codeaurora.org>. Link: https://lore.kernel.org/r/20190828191756.24312-3-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: remove set but not used variable 'val'zhengbin2019-08-301-3/+0
| | | | | | | | | | | | | Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/ufs/ufs-qcom.c: In function ufs_qcom_pwr_change_notify: drivers/scsi/ufs/ufs-qcom.c:808:6: warning: variable val set but not used [-Wunused-but-set-variable] Fixes: 1e1e465c6d23 ("scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from host") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Acked-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: Make structure ufs_hba_qcom_vops constantNishka Dasgupta2019-08-201-1/+1
| | | | | | | | | | | | | Static structure ufs_hba_qcom_vops, of type ufs_hba_variant_ops, is used only once, when it is passed as the second argument to function ufshcd_pltfrm_init(). In the definition of ufshcd_pltfrm_init(), its second parameter (corresponding to ufs_hba_qcom_vops) is declared as constant. Hence declare ufs_hba_qcom_vops itself constant as well to protect it from unintended modification. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2019-07-121-3/+20
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs, mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the removal of the osst driver (I heard from Willem privately that he would like the driver removed because all his test hardware has failed). Plus number of minor changes, spelling fixes and other trivia. The big merge conflict this time around is the SPDX licence tags. Following discussion on linux-next, we believe our version to be more accurate than the one in the tree, so the resolution is to take our version for all the SPDX conflicts" Note on the SPDX license tag conversion conflicts: the SCSI tree had done its own SPDX conversion, which in some cases conflicted with the treewide ones done by Thomas & co. In almost all cases, the conflicts were purely syntactic: the SCSI tree used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the treewide conversion had used the new-style ones ("GPL-2.0-only" and "GPL-2.0-or-later"). In these cases I picked the new-style one. In a few cases, the SPDX conversion was actually different, though. As explained by James above, and in more detail in a pre-pull-request thread: "The other problem is actually substantive: In the libsas code Luben Tuikov originally specified gpl 2.0 only by dint of stating: * This file is licensed under GPLv2. In all the libsas files, but then muddied the water by quoting GPLv2 verbatim (which includes the or later than language). So for these files Christoph did the conversion to v2 only SPDX tags and Thomas converted to v2 or later tags" So in those cases, where the spdx tag substantially mattered, I took the SCSI tree conversion of it, but then also took the opportunity to turn the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag. Similarly, when there were whitespace differences or other differences to the comments around the copyright notices, I took the version from the SCSI tree as being the more specific conversion. Finally, in the spdx conversions that had no conflicts (because the treewide ones hadn't been done for those files), I just took the SCSI tree version as-is, even if it was old-style. The old-style conversions are perfectly valid, even if the "-only" and "-or-later" versions are perhaps more descriptive. * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits) scsi: qla2xxx: move IO flush to the front of NVME rport unregistration scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition scsi: qla2xxx: on session delete, return nvme cmd scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1 scsi: megaraid_sas: Introduce various Aero performance modes scsi: megaraid_sas: Use high IOPS queues based on IO workload scsi: megaraid_sas: Set affinity for high IOPS reply queues scsi: megaraid_sas: Enable coalescing for high IOPS queues scsi: megaraid_sas: Add support for High IOPS queues scsi: megaraid_sas: Add support for MPI toolbox commands scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD scsi: megaraid_sas: Handle sequence JBOD map failure at driver level scsi: megaraid_sas: Don't send FPIO to RL Bypass queue scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout scsi: megaraid_sas: Call disable_irq from process IRQ poll scsi: megaraid_sas: Remove few debug counters from IO path ...
| * scsi: ufs-qcom: Add support for platforms booting ACPILee Jones2019-06-201-3/+20
| | | | | | | | | | | | | | | | | | | | | | New Qualcomm AArch64 based laptops are now available which use UFS as their primary data storage medium. These devices are supplied with ACPI support out of the box. This patch ensures the Qualcomm UFS driver will be bound when the "QCOM24A5" H/W device is advertised as present. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284Thomas Gleixner2019-06-051-10/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 and only version 2 as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 294 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.825281744@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2019-05-081-102/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is mostly update of the usual drivers: qla2xxx, qedf, smartpqi, hpsa, lpfc, ufs, mpt3sas, ibmvfc and hisi_sas. Plus number of minor changes, spelling fixes and other trivia" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (298 commits) scsi: qla2xxx: Avoid that lockdep complains about unsafe locking in tcm_qla2xxx_close_session() scsi: qla2xxx: Avoid that qlt_send_resp_ctio() corrupts memory scsi: qla2xxx: Fix hardirq-unsafe locking scsi: qla2xxx: Complain loudly about reference count underflow scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses to firmware scsi: qla2xxx: Introduce the dsd32 and dsd64 data structures scsi: qla2xxx: Check the size of firmware data structures at compile time scsi: qla2xxx: Pass little-endian values to the firmware scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands scsi: qla2xxx: Use an on-stack completion in qla24xx_control_vp() scsi: qla2xxx: Make qla24xx_async_abort_cmd() static scsi: qla2xxx: Remove unnecessary locking from the target code scsi: qla2xxx: Remove qla_tgt_cmd.released scsi: qla2xxx: Complain if a command is released that is owned by the firmware scsi: qla2xxx: target: Fix offline port handling and host reset handling scsi: qla2xxx: Fix abort handling in tcm_qla2xxx_write_pending() scsi: qla2xxx: Fix error handling in qlt_alloc_qfull_cmd() scsi: qla2xxx: Simplify qlt_send_term_imm_notif() scsi: qla2xxx: Fix use-after-free issues in qla2xxx_qpair_sp_free_dma() scsi: qla2xxx: Fix a qla24xx_enable_msix() error path ...
| * scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_paramStanley Chu2019-03-191-102/+4
| | | | | | | | | | | | | | | | | | | | ufshcd_get_pwr_dev_param function and ufs_dev_params struct have been relocated to ufs core. Switch ufs-qcom to the common interface. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Acked-by: Bean Huo <beanhuo@micron.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | phy: ufs-qcom: Refactor all init steps into phy_poweronEvan Green2019-04-171-26/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The phy code was using implicit sequencing between the PHY driver and the UFS driver to implement certain hardware requirements. Specifically, the PHY reset register in the UFS controller needs to be deasserted before serdes start occurs in the PHY. Before this change, the code was doing this by utilizing the two phy callbacks, phy_init() and phy_poweron(), as "init step 1" and "init step 2", where the UFS driver would deassert reset between these two steps. This makes it challenging to power off the regulators in suspend, as regulators are initialized in init, not in poweron(), but only poweroff() is called during suspend, not exit(). For UFS, move the actual firing up of the PHY to phy_poweron() and phy_poweroff() callbacks, rather than init()/exit(). UFS calls phy_poweroff() during suspend, so now all clocks and regulators for the phy can be powered down during suspend. QMP is a little tricky because the PHY is also shared with PCIe and USB3, which have their own definitions for init() and poweron(). Rename the meaty functions to _enable() and _disable() to disentangle from the PHY core names, and then create two different ops structures: one for UFS and one for the other PHY types. In phy-qcom-ufs, remove the 'is_powered_on' and 'is_started' guards, as the generic PHY code does the reference counting. The 14/20nm-specific init functions get collapsed into the generic power_on() function, with the addition of a calibrate() callback specific to 14/20nm. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | phy: qcom: Utilize UFS reset controllerEvan Green2019-04-171-18/+0
| | | | | | | | | | | | | | | | | | Move the PHY reset from ufs-qcom into the respective PHYs. This will allow us to merge the two phases of UFS PHY initialization. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | scsi: ufs: qcom: Expose the reset controller for PHYEvan Green2019-04-171-0/+52
|/ | | | | | | | | | Expose a reset controller that the phy will later use to control its own PHY reset in the UFS controller. This will enable the combining of PHY init functionality into a single function. Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* Merge tag 'usb-4.20-rc1' of ↵Linus Torvalds2018-10-261-27/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big USB/PHY driver patches for 4.20-rc1 Lots of USB changes in here, primarily in these areas: - typec updates and new drivers - new PHY drivers - dwc2 driver updates and additions (this old core keeps getting added to new devices.) - usbtmc major update based on the industry group coming together and working to add new features and performance to the driver. - USB gadget additions for new features - USB gadget configfs updates - chipidea driver updates - other USB gadget updates - USB serial driver updates - renesas driver updates - xhci driver updates - other tiny USB driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (229 commits) usb: phy: ab8500: silence some uninitialized variable warnings usb: xhci: tegra: Add genpd support usb: xhci: tegra: Power-off power-domains on removal usbip:vudc: BUG kmalloc-2048 (Not tainted): Poison overwritten usbip: tools: fix atoi() on non-null terminated string USB: misc: appledisplay: fix backlight update_status return code phy: phy-pxa-usb: add a new driver usb: host: add DT bindings for faraday fotg2 usb: host: ohci-at91: fix request of irq for optional gpio usb/early: remove set but not used variable 'remain_length' usb: typec: Fix copy/paste on typec_set_vconn_role() kerneldoc usb: typec: tcpm: Report back negotiated PPS voltage and current USB: core: remove set but not used variable 'udev' usb: core: fix memory leak on port_dev_path allocation USB: net2280: Remove ->disconnect() callback from net2280_pullup() usb: dwc2: disable power_down on rockchip devices usb: gadget: udc: renesas_usb3: add support for r8a77990 dt-bindings: usb: renesas_usb3: add bindings for r8a77990 usb: gadget: udc: renesas_usb3: Add r8a774a1 support USB: serial: cypress_m8: remove set but not used variable 'iflag' ...
| * scsi/ufs: qcom: Remove ufs_qcom_phy_*() calls from hostVivek Gautam2018-09-261-27/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The host makes direct calls into phy using ufs_qcom_phy_*() APIs. These APIs are only defined for 20nm qcom-ufs-qmp phy which is not being used by any architecture as yet. Future architectures too are not going to use 20nm ufs phy. So remove these ufs_qcom_phy_*() calls from host to let further change declare the 20nm phy as broken. Also remove couple of stale enum defines for ufs phy. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | scsi: ufs: make UFS Tx lane1 clock optional for QCOM platformsVenkat Gopalakrishnan2018-10-161-26/+28
|/ | | | | | | | | | | | | | | | Per Qcom's UFS host controller HW design, the UFS Tx lane1 clock could be muxed with Tx lane0 clock, hence keep Tx lane1 clock optional by ignoring it if it is not provided in device tree. This change also performs some cleanup to lanes per direction checks when enable/disable lane clocks just for symmetry. Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Can Guo <cang@codeaurora.org> Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: ufshcd_dump_regs to use memcpy_fromioTomas Winkler2018-06-201-15/+6
| | | | | | | | | | | | | | | ufshcd_dump_regs should use memcpy_fromio to read host registers instead of directly accessing using memcpy. The same function is utilized in ufs-qcom. Elminite compilation warning drivers/scsi/ufs/ufshcd.c:356:9: warning: incorrect type in argument 6 (different address spaces) drivers/scsi/ufs/ufshcd.c:356:9: expected void const *buf drivers/scsi/ufs/ufshcd.c:356:9: got void [noderef] <asn:2>*mmio_base Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: ufs-qcom: remove broken hci version quirkSubhash Jadavani2018-05-181-1/+1
| | | | | | | | | | | | UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION is only applicable for QCOM UFS host controller version 2.x.y and this has been fixed from version 3.x.y onwards, hence this change removes this quirk for version 3.x.y onwards. [mkp: applied by hand] Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2017-11-151-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull SCSI updates from James Bottomley: "This is mostly updates of the usual suspects: lpfc, qla2xxx, hisi_sas, megaraid_sas, pm80xx, mpt3sas, be2iscsi, hpsa. and a host of minor updates. There's no major behaviour change or additions to the core in all of this, so the potential for regressions should be small (biggest potential being in the scsi error handler changes)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (203 commits) scsi: lpfc: Fix hard lock up NMI in els timeout handling. scsi: mpt3sas: remove a stray KERN_INFO scsi: mpt3sas: cleanup _scsih_pcie_enumeration_event() scsi: aacraid: use timespec64 instead of timeval scsi: scsi_transport_fc: add 64GBIT and 128GBIT port speed definitions scsi: qla2xxx: Suppress a kernel complaint in qla_init_base_qpair() scsi: mpt3sas: fix dma_addr_t casts scsi: be2iscsi: Use kasprintf scsi: storvsc: Avoid excessive host scan on controller change scsi: lpfc: fix kzalloc-simple.cocci warnings scsi: mpt3sas: Update mpt3sas driver version. scsi: mpt3sas: Fix sparse warnings scsi: mpt3sas: Fix nvme drives checking for tlr. scsi: mpt3sas: NVMe drive support for BTDHMAPPING ioctl command and log info scsi: mpt3sas: Add-Task-management-debug-info-for-NVMe-drives. scsi: mpt3sas: scan and add nvme device after controller reset scsi: mpt3sas: Set NVMe device queue depth as 128 scsi: mpt3sas: Handle NVMe PCIe device related events generated from firmware. scsi: mpt3sas: API's to remove nvme drive from sml scsi: mpt3sas: API 's to support NVMe drive addition to SML ...
| * scsi: ufs-qcom: Remove uses of UFS_BIT() macroAlim Akhtar2017-10-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Use actual bit position instead of UFS_BIT() macro. This patch also changes bit-17 to meaningful #define. This change is as per discussion here [1] [1] -> https://lkml.org/lkml/2017/8/28/786 Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Cc: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | ufs/phy: qcom: Refactor to use phy_init callVivek Gautam2017-10-231-22/+14
| | | | | | | | | | | | | | | | | | | | Refactor ufs_qcom_power_up_sequence() to get rid of ugly exported phy APIs and use the phy_init() and phy_power_on() to do the phy initialization. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* | scsi/ufs: qcom: Set phy mode based on the controllers HS MODEVivek Gautam2017-10-231-0/+3
|/ | | | | | | | | | Set the phy mode based on the UFS HS PA mode. This lets the controller let phy know the mode in which the PHY Adapter is running and set the phy rates accordingly. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
* scsi: ufs-qcom: remove redundant condition checkSubhash Jadavani2017-02-231-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dan Carpenter <dan.carpenter@oracle.com> reported this: The patch 9c46b8676271: "scsi: ufs-qcom: dump additional testbus registers" from Feb 3, 2017, leads to the following static checker warning: drivers/scsi/ufs/ufs-qcom.c:1531 ufs_qcom_testbus_cfg_is_ok() warn: impossible condition '(host->testbus.select_minor > 255) => (0-255 > 255)' drivers/scsi/ufs/ufs-qcom.c 1517 static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) 1518 { 1519 if (host->testbus.select_major >= TSTBUS_MAX) { 1520 dev_err(host->hba->dev, 1521 "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", 1522 __func__, host->testbus.select_major); 1523 return false; 1524 } 1525 1526 /* 1527 * Not performing check for each individual select_major 1528 * mappings of select_minor, since there is no harm in 1529 * configuring a non-existent select_minor 1530 */ 1531 if (host->testbus.select_minor > 0xFF) { ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ It might make sense to keep this check. I don't know. But it's confusing that 0xFF is a magic number. Better to make it a define. 1532 dev_err(host->hba->dev, 1533 "%s: 0x%05X is not a legal testbus option\n", 1534 __func__, host->testbus.select_minor); 1535 return false; 1536 } 1537 1538 return true; 1539 } --- As data type of "select_minor" is u8, above check is redundant. This change removes it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: dump additional testbus registersVenkat Gopalakrishnan2017-02-081-6/+42
| | | | | | | | | | Change testbus default config, dump additional testbus registers along with other debug vendor specific registers. These additional info are useful in debugging link related failures. Signed-off-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: Fix module autoloadJavier Martinez Canillas2017-01-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/scsi/ufs/ufs-qcom.ko | grep alias $ After this patch: $ modinfo drivers/scsi/ufs/ufs-qcom.ko | grep alias alias: of:N*T*Cqcom,ufshcC* alias: of:N*T*Cqcom,ufshc Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: fix bug with read/modify write of UFS_CFG1Subhash Jadavani2016-12-081-1/+2
| | | | | | | | | | ufs_qcom_print_hw_debug_reg_all() function is having a bug where it might incorrectly modify undesired bits in UFS_CFG1 register, this change fixes it. Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add quirk to increase host PA_SaveConfigTimeSubhash Jadavani2016-12-081-0/+30
| | | | | | | | | | | | | | The maximum value PA_SaveConfigTime is 250 (10us) but this is not enough for some vendors. Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime. Gear switch can be issued by host controller as an error recovery and any software delay will not help on this case so we need to increase PA_SaveConfigTime to >32us as per vendor recommendation. This change adds a quirk to increase the PA_SaveConfigTime parameter. Reviewed-by: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: add probe_defer in case phy driver not probed yetYaniv Gardi2016-12-081-1/+10
| | | | | | | | | In case UFS driver is probed before the phy driver does, the UFS driver should return a PROBE_DEFER code. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: qcom: Properly clear hba priv on failureBjorn Andersson2016-11-221-3/+3
| | | | | | | | | | | ufs_qcom_init() sets the hba priv data before attempting to acquire the phy handle, so make sure to clear this in the case of an error. Failing to do this will make ufs_qcom_setup_clocks() operate on the uninitalized host object. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: qcom: Don't free resource-managed kmalloc elementVivek Gautam2016-11-091-1/+0
| | | | | | | | | | | Host is allocated by managed kmalloc (devm_kmalloc). The memory allocated with this function is automatically freed on driver detach. So, no need to make an exclusive free call over it. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: qcom: Add phy_exit call in hcd exit pathVivek Gautam2016-11-091-0/+1
| | | | | | | | | Do a phy_exit() over the ufs phy in the ufs qcom exit path to de-initialize the phy. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: phy/hcd: Refactoring phy clock handlingVivek Gautam2016-11-091-15/+6
| | | | | | | | | | Add phy clock enable code to phy_power_on/off callbacks, and remove explicit calls to enable these phy clocks from the ufs-qcom hcd driver. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufshcd: Fix possible unclocked register accessSubhash Jadavani2016-11-081-4/+6
| | | | | | | | | | | | | | | Vendor specific setup_clocks callback may require the clocks managed by ufshcd driver to be ON. So if the vendor specific setup_clocks callback is called while the required clocks are turned off, it could result into unclocked register access. To prevent possible unclock register access, this change adds one more argument to setup_clocks callback to let it know whether it is called pre/post the clock changes by core driver. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: add printouts of testbus debug registersYaniv Gardi2016-03-151-0/+77
| | | | | | | | This change adds printouts of testbus and debug registers. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: enable/disable the device ref clockYaniv Gardi2016-03-151-0/+12
| | | | | | | | | This change enables the device ref clock before changing to HS mode and disables it if entered to PWM mode. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: set PA_Local_TX_LCC_Enable before link startupYaniv Gardi2016-03-151-7/+20
| | | | | | | | | | | | Some UFS devices (and may be host) have issues if LCC is enabled. So we are setting PA_Local_TX_LCC_Enable to 0 before link startup which will make sure that both host and device TX LCC are disabled once link startup is completed. Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: add number of lanes per directionYaniv Gardi2016-03-151-17/+22
| | | | | | | | | | | | | Different platform may have different number of lanes for the UFS link. Add parameter to device tree specifying how many lanes should be configured for the UFS link. Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: add QUniPro hardware support and power optimizationsYaniv Gardi2015-11-101-168/+472
| | | | | | | | | | | | | | | New revisions of UFS host controller supports the new UniPro hardware controller (referred as QUniPro). This patch adds the support to enable this new UniPro controller hardware. This change also adds power optimization for bus scaling feature, as well as support for HS-G3 power mode. Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: add debug prints for test busYaniv Gardi2015-11-101-3/+162
| | | | | | | | | | | | Adds support for configuring and reading the test bus and debug registers. This change also adds another vops in order to print the debug registers. Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: make the UFS variant a platform deviceYaniv Gardi2015-11-101-1/+61
| | | | | | | | | | | | | | | | | | | | This change turns the UFS variant (SCSI_UFS_QCOM) into a UFS a platform device. In order to do so a few additional changes are required: 1. The ufshcd-pltfrm is no longer serves as a platform device. Now it only serves as a group of platform APIs such as PM APIs (runtime suspend/resume, system suspend/resume etc), parsers of clocks, regulators and pm_levels from DT. 2. What used to be the old platform "probe" is now "only" a pltfrm_init() routine, that does exactly the same, but only being called by the new probe function of the UFS variant. Reviewed-by: Rob Herring <robherring2@gmail.com> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: creates wrapper functions for vopsYaniv Gardi2015-11-091-1/+0
| | | | | | | | | | | | | In order to simplify the code a set of wrapper functions is created to test and call each of the variant operations. Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs: add ufshcd_get_variant ufshcd_set_variantYaniv Gardi2015-11-091-17/+17
| | | | | | | | | | | | | This patch adds ufshcd_get_variant() and ufshcd_set_variant() routines in order to get/set the variant specific data. Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: fix compilation warning if compiled as a moduleYaniv Gardi2015-11-091-1/+6
| | | | | | | | | | | | | | This change fixes a compilation warning that happens if SCSI_UFS_QCOM is compiled as a module. Also this patch fixes an error happens when insmod the module: "ufs_qcom: module license 'unspecified' taints kernel." Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: ufs-qcom: enable UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSIONYaniv Gardi2015-06-021-0/+12
| | | | | | | | | | | | Newer revisions of QUALCOMM Technologies UFS host controller may not advertise the correct version information in UFS HCI VER register. To handle this, enable UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION to let UFS standard host controller driver call into vendor specific operation to get right UFS HCI VER register value. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* scsi: ufs-qcom: enable UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE quirkYaniv Gardi2015-06-021-1/+3
| | | | | | | | | | Current version of host controller on QUALCOMM Technologies requires this quirk to be enabled, as DME commands to device must be sent only in AUTO mode (SLOW AUTO or FAST AUTO). Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* scsi: ufs-qcom: enable quirk to fix gear change to HSYaniv Gardi2015-06-021-2/+4
| | | | | | | | | | | | With the G3 UFS devices, changing gear into HS is failing in UFS host controllers of version 0x2. The quirk solves the problem of changing gear into HS by enabling the attribute that specifies whether or not the inbound Link supports unterminated line in HS mode. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* scsi: ufs-qcom: enable UFSHCD_QUIRK_BROKEN_LCCYaniv Gardi2015-06-021-0/+2
| | | | | | | | | | | | LCC (Line Control Command) are being used for communication between UFS host and UFS device. But UFS host controller on QUALCOMM Technologies have an issue with issuing the LCC commands to UFS device and hence this quirk is enabled in order to to disable LCC from the host side. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* scsi: ufs-qcom: don't enable interrupt aggregationYaniv Gardi2015-06-021-1/+16
| | | | | | | | | | | | | Current versions of UFS host controllers on QUALCOMM Technologies have interrupt aggregation logic broken. Interrupt aggregation may not work if both threshold count and timeout is enabled. Hence disable interrupt aggregation by enabling UFSHCD_QUIRK_BROKEN_INTR_AGGR quirk until its fixed in the newer UFS host controller revisions. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ufs: add support to allow non standard behaviours (quirks)Yaniv Gardi2015-04-101-5/+17
| | | | | | | | | | | | | | | | Some implementation of UFS host controller HW might have some non-standard behaviours (quirks) when compared to behaviour specified by UFSHCI specification. This patch add support to allow specifying all such quirks to standard UFS host controller driver so standard driver takes them into account. In this change a UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS is introduced, where a minimum delay of 1ms is required before DME commands for stability purposes. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ufs-qcom: save controller revision info in internal structureYaniv Gardi2015-04-101-7/+7
| | | | | | | | | | | | Sometimes, specific information about the UFS controller revision is required in order to determine certain operations or execute controller dependent quirks. In order to avoid reading the controller revision multiple times, we simply read it once and save this information in internal structure. Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Gilad Broner <gbroner@codeaurora.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* ufs-qcom: add support for Qualcomm Technologies Inc platformsYaniv Gardi2015-01-201-0/+1004
This change adds support for Qualcomm Technologies Inc platforms that use UFS driver. for example, it adds : - PM specific operations during hibern8, suspend, resume, clock setup - qcom-ufs generic phy driver initialization, calibration, power-on/off sequence, etc. - UFS Controller specific configuration - Rate, Gear, Mode negotiation between device and controller Signed-off-by: Yaniv Gardi <ygardi@codeaurora.org> Reviewed-by: Dov Levenglick <dovl@codeaurora.org> Signed-off-by: Christoph Hellwig <hch@lst.de>