summaryrefslogtreecommitdiffstats
path: root/drivers/scsi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] Retry commands with UNIT_ATTENTION sense codes to fix ext3/ext4 I/O errorJames Bottomley2010-05-051-1/+14
| | | | | | | | | | | | | | | | | | | | | There's nastyness in the way we currently handle barriers (and discards): They're effectively filesystem commands, but they get processed as BLOCK_PC commands. Unfortunately BLOCK_PC commands are taken by SCSI to be SG_IO commands and the issuer expects to see and handle any returned errors, however trivial. This leads to a huge problem, because the block layer doesn't expect this to happen and any trivially retryable error on a barrier causes an immediate I/O error to the filesystem. The only real way to hack around this is to take the usual class of offending errors (unit attentions) and make them all retryable in the case of a REQ_HARDBARRIER. A correct fix would involve a rework of the entire block and SCSI submit system, and so is out of scope for a quick fix. Cc: Hannes Reinecke <hare@suse.de> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] Enable retries for SYNCRONIZE_CACHE commands to fix I/O errorHannes Reinecke2010-05-051-0/+1
| | | | | | | | | | | | Some arrays are giving I/O errors with ext3 filesystems when SYNCHRONIZE_CACHE gets a UNIT_ATTENTION. What is happening is that these commands have no retries, so the UNIT_ATTENTION causes the barrier to fail. We should be enable retries here to clear any transient error and allow the barrier to succeed. Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] scsi_debug: virtual_gb ignores sector_sizeDouglas Gilbert2010-05-021-1/+2
| | | | | | | | | | In the scsi_debug driver, the virtual_gb option ignores the sector_size, implicitly assuming that is 512 bytes. So if 'virtual_gb=1 sector_size=4096' the result is an 8 GB (virtual) disk. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] libiscsi: regression: fix header digest errorsMike Christie2010-05-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | This fixes a regression introduced with this commit: commit d3305f3407fa3e9452079ec6cc8379067456e4aa Author: Mike Christie <michaelc@cs.wisc.edu> Date: Thu Aug 20 15:10:58 2009 -0500 [SCSI] libiscsi: don't increment cmdsn if cmd is not sent in 2.6.32. When I moved the hdr->cmdsn after init_task, I added a bug when header digests are used. The problem is that the LLD may calculate the header digest in init_task, so if we then set the cmdsn after the init_task call we change what the digest will be calculated by the target. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] fix locking around blk_abort_request()Tejun Heo2010-05-012-0/+8
| | | | | | | | | | | | blk_abort_request() expects queue lock to be held by the caller. Grab it before calling the function. Lack of this synchronization led to infinite loop on corrupt q->timeout_list. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] advansys: fix narrow board error pathHerton Ronaldo Krzesinski2010-05-011-14/+36
| | | | | | | | | | | | | Error handling on advansys_board_found is fixed, because it's buggy in the case we have an ASC_NARROW_BOARD set and failure happens on AscInitAsc1000Driver step: it was freeing items of wrong struct in the dvc_var union of struct asc_board, which could lead to an oops in the case we set some of the fields in struct of narrow board as code was choosing to always freeing wide board fields, and not everything was being freed/released properly. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* scsi: fix operator precedence warningRandy Dunlap2010-04-221-1/+1
| | | | | | | | | | | | | | Fix operator precedence warning (from sparse), which results in the data value always being 0: drivers/scsi/qla4xxx/ql4_mbx.c:470:66: warning: right shift by bigger than source value Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Ravi Anand <ravi.anand@qlogic.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Cc: Karen Higgins <karen.higgins@qlogic.com> Cc: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2010-04-2210-41/+41
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] bnx2i: Bug fixes related to MTU change issue when there are active iscsi sessions [SCSI] ibmvscsi: fix DMA API misuse [SCSI] wd7000: fix reset handler typo spin_unlock_irq() => spin_lock_irq() [SCSI] zfcp: Fix tracing of requests with error status [SCSI] zfcp: Update MAINTAINERS entry [SCSI] iscsi_tcp: fix relogin/shutdown hang [SCSI] qla2xxx: fix lock imbalance [SCSI] lpfc: fix lock imbalances [SCSI] be2iscsi: fix lock imbalance [SCSI] dpt_i2o: several use after free issues
| * [SCSI] bnx2i: Bug fixes related to MTU change issue when there are active ↵Anil Veerabhadrappa2010-04-113-4/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | iscsi sessions bnx2i driver has to wait and cleanup all iscsi endpoints before returning from bnx2i_stop(). This is to make sure all chip resources are freed before chip is reset. As the requirements for 1G and 10G chipsets is different, added per-device 'hba_shutdown_tmo' parameter to adapter structure If the connections are not torn down by the daemon within this timeout period, 'cid's will be leaked in 10G device. 1G devices are more flexible and do not leak any resources because the whole chip ports gets reset when MTU is changed or ethtool selftest is run fixed a minor issue in bnx2i_ep_poll() which unnecessarily forced error return code when driver timed out waiting for TCP connect request to complete Signed-off-by: Anil Veerabhadrappa <anilgv@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] ibmvscsi: fix DMA API misuseFUJITA Tomonori2010-04-111-27/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | ibmvscsi uses dma_unmap_single() for buffers mapped via dma_map_sg(). It works however it's the API violation. The DMA debug facility complains about it: http://marc.info/?l=linux-scsi&m=127018555013151&w=2 Reported-by: Sachin Sant <sachinp@in.ibm.com> Tested-by: Sachin Sant <sachinp@in.ibm.com> Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] wd7000: fix reset handler typo spin_unlock_irq() => spin_lock_irq()Dan Carpenter2010-04-111-1/+1
| | | | | | | | | | | | | | | | | | This was introduced back in 2005 at the very start of the git era by: df0ae2497ddefd72a87f3a3b34ff32455d7d4ae0 [SCSI] allow sleeping in ->eh_host_reset_handler() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] iscsi_tcp: fix relogin/shutdown hangMike Christie2010-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When I made this patch: b64e77f70b8c11766e967e3485331a9e6ef01390 it was to solve a problem where we were already on the waitqueue becuase a connection problem/logout caused us to be on there when we were cleaning up the session. If we happen to get on queue for more normal reasons like their just does not happen to be any send space at the same time we are closing the connection we hit a race and get stuck in the wait. We should not check if the waitqueue is active because we could race with the network code. If the network xmit code is just about to enter the prepare to wait when we check for the waitqueue to be active then we will miss each other and the network code will fall into the wait and we will not run wake_up. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] qla2xxx: fix lock imbalanceJiri Slaby2010-04-091-0/+1
| | | | | | | | | | | | | | | | | | Stanse found that one error path in qla24xx_bsg_timeout omits to unlock ha->hardware_lock. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] lpfc: fix lock imbalancesJiri Slaby2010-04-091-2/+2
| | | | | | | | | | | | | | | | | | | | Stanse found that two error paths in lpfc_bsg_rport_els_cmp and lpfc_issue_ct_rsp_cmp omits to unlock phba->ct_ev_lock. It is because they wrongly unlock phba->hbalock instead. Fix that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] be2iscsi: fix lock imbalanceJiri Slaby2010-04-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Stanse found that one error path in mgmt_invalidate_icds omits to unlock ctrl->mbox_lock. Fix that. Added in 756d29c8c7ed8887ed7d752371ce2f (Enable async mode for mcc rings) where the spinlock was moved. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Jayamohan Kallickal <jayamohank@serverengines.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * [SCSI] dpt_i2o: several use after free issuesDan Carpenter2010-04-091-6/+9
| | | | | | | | | | | | | | | | | | | | adpt_i2o_delete_hba() calls kfree() so we have to save "pHba->next" before calling it. Also inside adpt_i2o_delete_hba() itself, there was another use after free bug which I fixed by moving the kfree() down a line. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds2010-04-091-1/+1
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits) cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch loop: Update mtime when writing using aops block: expose the statistics in blkio.time and blkio.sectors for the root cgroup backing-dev: Handle class_create() failure Block: Fix block/elevator.c elevator_get() off-by-one error drbd: lc_element_by_index() never returns NULL cciss: unlock on error path cfq-iosched: Do not merge queues of BE and IDLE classes cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging i2o: Remove the dangerous kobj_to_i2o_device macro block: remove 16 bytes of padding from struct request on 64bits cfq-iosched: fix a kbuild regression block: make CONFIG_BLK_CGROUP visible Remove GENHD_FL_DRIVERFS block: Export max number of segments and max segment size in sysfs block: Finalize conversion of block limits functions block: Fix overrun in lcm() and move it to lib vfs: improve writeback_inodes_wb() paride: fix off-by-one test drbd: fix al-to-on-disk-bitmap for 4k logical_block_size ...
| * Merge branch 'master' into for-linusJens Axboe2010-03-1914-18/+18
| |\ | | | | | | | | | | | | | | | | | | Conflicts: block/Kconfig Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
| * | Remove GENHD_FL_DRIVERFSNeilBrown2010-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This flag is not used, so best discarded. Signed-off-by: NeilBrown <neilb@suse.de> -- Hi Jens, I came across this recently - these are the only two occurances of "GENHD_FL_DRIVERFS" in the kernel, so it cannot be needed. NeilBrown Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds2010-04-0610-84/+171
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] qla1280: retain firmware for error recovery [SCSI] attirbute_container: Initialize sysfs attributes with sysfs_attr_init [SCSI] advansys: fix regression with request_firmware change [SCSI] qla2xxx: Updated version number to 8.03.02-k2. [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset. [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432. [SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not enabled at the same time. [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing. [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs. [SCSI] scsi_transport_fc: Make sure commands are completed when rport is offline [SCSI] libiscsi: Fix recovery slowdown regression
| * | | [SCSI] qla1280: retain firmware for error recoveryMichael Reed2010-03-271-52/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The qla1280 driver acquires its firmware via udev. During boot the firmware is located in the initrd. If, after root is mounted, the adapter needs to reload firmware (host reset), the firmware load may fail if the root device is on the adapter being reset. This patch modifies qla1280 to retain the firmware loaded via the initial request_firmware() for use during error recovery. [jejb: fix up checkpatch issues] Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] advansys: fix regression with request_firmware changeHerton Ronaldo Krzesinski2010-03-271-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On newer kernels users of advansys module are reporting system hang when trying to load it without firmware files present. After looking closely at description on https://qa.mandriva.com/show_bug.cgi?id=53220, I think this is related to commit "[SCSI] advansys: use request_firmware". The problem is that after switch to request_firmware, asc_dvc->err_code isn't being set when firmware files aren't found or loading fails. err_code is used by the driver to judge if there was a fatal error or not, as can be seen for example on advansys_board_found, which will only return -ENODEV when err_code is set. Because err_code isn't being set when request_firmware fails, this is a change of behaviour of the code before request_firmware addition, making it continue to load and it fails later as the firmware wasn't really loaded. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] qla2xxx: Updated version number to 8.03.02-k2.Giridhar Malavali2010-03-271-2/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] qla2xxx: Prevent sending mbx commands from sysfs during isp reset.Santosh Vernekar2010-03-271-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fix prevents application path from sending get-firmware-state mbx command during as isp reset. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] qla2xxx: Disable MSI on qla24xx chips other than QLA2432.Ben Hutchings2010-03-271-15/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On specific platforms, MSI is unreliable on some of the QLA24xx chips, resulting in fatal I/O errors under load, as reported in <http://bugs.debian.org/572322> and by some RHEL customers. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] qla2xxx: Check to make sure multique and CPU affinity support is not ↵Michael Hernandez2010-03-271-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enabled at the same time. The logic is changed to detect this condition based on following 1) both module parameters are off (ql2xmaxqueues and ql2xmultique_tag). 2) both module parameters are on (ql2xmaxqueues and ql2xmultique_tag). 3) The HBA does not support multi queue. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] qla2xxx: Correct vp_idx checking during PORT_UPDATE processing.Andrew Vasquez2010-03-271-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Checks should only be done for NPIV-capable ISPs. Original code could result in PORT_UPDATEs being missed on non-NPIV-capable ISPs. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] qla2xxx: Honour "Extended BB credits" bit for CNAs.Santosh Vernekar2010-03-272-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We now enable/disable "Additional Receive Credits" in f/w based on nvram parameter "Extended_BB_Credits" bit (i.e. Enhanced-Features: at offset 0x196). This is applicable only for GEN2 CNAs. Signed-off-by: Santosh Vernekar <santosh.vernekar@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] scsi_transport_fc: Make sure commands are completed when rport is offlineSarang Radke2010-03-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | blk_end_request doesn't complete a bidi request successfully The unfinished request eventually triggers a panic in timeout handling routine fc_bsg_job_timeout as req->special is NULL Use blk_end_request_all to end the request unconditionally Signed-off-by: Lalit Chandivade <lalit.chandivade@qlogic.com> Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] libiscsi: Fix recovery slowdown regressionMike Christie2010-03-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We could be failing/stopping a connection due to libiscsi starting recovery/cleanup, but the xmit path or scsi eh thread path could be dropping the connection at the same time. As a result the session->state gets set to failed instead of in recovery. We end up not blocking the session and so the replacement timeout never gets started and we only end up failing the IO when scsi_softirq_done sees that the cmd has been running for (cmd->allowed + 1) * rq->timeout secs. We used to fail the IO right away so users are seeing a long delay when using dm-multipath. This problem was added in 2.6.28. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@kernel.org Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* | | | include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-30165-11/+158
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds2010-03-19131-3523/+7201
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits) [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport [SCSI] bfa: Update the driver version to 2.1.2.1. [SCSI] bfa: Remove unused header files and did some cleanup. [SCSI] bfa: Handle SCSI IO underrun case. [SCSI] bfa: FCS and include file changes. [SCSI] bfa: Modified the portstats get/clear logic [SCSI] bfa: Replace bfa_get_attr() with specific APIs [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO). [SCSI] bfa: Rename pport to fcport in BFA FCS. [SCSI] bfa: IOC fixes, check for IOC down condition. [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state. [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt. [SCSI] bfa: IOC recovery fix in fcmode. [SCSI] bfa: AEN and byte alignment fixes. [SCSI] bfa: Introduce a link notification state machine. [SCSI] bfa: Added firmware save clear feature for BFA driver. [SCSI] bfa: FCS authentication related changes. [SCSI] bfa: PCI VPD, FIP and include file changes. [SCSI] bfa: Fix to copy fpma MAC when requested by user space application. [SCSI] bfa: RPORT state machine: direct attach mode fix. ...
| * | | [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vportGal Rosen2010-03-081-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The issue occur while deleting 60 virtual ports through the sys interface /sys/class/fc_vports/vport-X/vport_delete. It happen while in a mistake each request sent twice for the same vport. This interface is asynchronous, entering the delete request into a work queue, allowing more than one request to enter to the delete work queue. The result is a NULL pointer. The first request already delete the vport, while the second request got a pointer to the vport before the device destroyed. Re-create vport later cause system freeze. Solution: Check vport flags before entering the request to the work queue. [jejb: fixed int<->long problem on spinlock flags variable] Signed-off-by: Gal Rosen <galr@storwize.com> Acked-by: James Smart <james.smart@emulex.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Update the driver version to 2.1.2.1.Krishna Gudipati2010-03-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Upgrade the upstream driver from 2.0.0.0 to 2.1.2.1. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Remove unused header files and did some cleanup.Krishna Gudipati2010-03-0713-238/+24
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Handle SCSI IO underrun case.Krishna Gudipati2010-03-071-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When IO is completed with underrun and with good SCSI status, check if the transferred bytes against scsi_cmnd->underflow, which is set to minimum number of bytes that must be transferred for this command, if is less than required minimum, complete the IO with DID_ERROR. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: FCS and include file changes.Krishna Gudipati2010-03-075-35/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MS module did not invoke fdmi offline in all cases, call fdmi offline when ms module receives a port offline, so that fdmi offline is from one place in the ms module. Make changes to handle 10G speed in the conversion routine. Replaced the usage of bfa_adapter_attr_s struct with specific API's. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Modified the portstats get/clear logicKrishna Gudipati2010-03-077-706/+405
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modified the portstats get/clear logic for port physical/FCoE/QoS stats. Added more stats to FC Fixed some issues with FCoE stats collection. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Replace bfa_get_attr() with specific APIsKrishna Gudipati2010-03-0715-215/+195
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bfa_ioc_attr_s is a big structure and some times could cause stack overflow if defined locally, so add specific APIs that are needed to replace the use of ioc_attr local var. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO).Krishna Gudipati2010-03-074-8/+66
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Rename pport to fcport in BFA FCS.Krishna Gudipati2010-03-0725-735/+1103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename pport structures to fcport in BFA FCS, to resolve confusion about the port structures in the firmware, and make sure the SG page is setup correctly. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: IOC fixes, check for IOC down condition.Krishna Gudipati2010-03-072-3/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently BFA was not checking for IOC down condition when issuing getstats/clearstats Add check to see if IOC is operational, before issuing getstats/clearstats. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are ↵Krishna Gudipati2010-03-072-27/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | in FW mismatch state. Use dummy interrupt handlers till chip initialization is complete. Install real interrupt handlers after chip initialization. Also removed msix installation code in bfa_iocfc_init(). Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt.Krishna Gudipati2010-03-075-24/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed the issue of not acknowledging the command queue full-to-non-full interrupt. Implemented separate acknowledging functions for different ASIC and interrupt mode. Fixed the case of missing CPE interrupt by always processing the pending requests in the completion path. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: IOC recovery fix in fcmode.Krishna Gudipati2010-03-071-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ioc_recover failed to work in fcmode. Fixed the code to initialize the ioc_regs.err_set during the notify_hbfail. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: AEN and byte alignment fixes.Krishna Gudipati2010-03-079-64/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace enum types with int and rearrange the fields to fix some alignment issue. Local var ioc_attr is causing the stack to overflow, so removed the usage of the local ioc_attr var and now invoking an API to return the ioc_type. Fix some AEN issues. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Introduce a link notification state machine.Krishna Gudipati2010-03-072-15/+230
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a link notification state machine to handle next incoming link events while the current event is being delivered to the driver. When the event has been processed by the driver, the link notification state machine will queue the next event (if there is any) to the driver. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: Added firmware save clear feature for BFA driver.Krishna Gudipati2010-03-074-1/+20
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: FCS authentication related changes.Krishna Gudipati2010-03-075-2/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Made FCS authentication related changes to state machines and header files. Made changes in FCS state machines to handle the case when secret string is NULL. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
| * | | [SCSI] bfa: PCI VPD, FIP and include file changes.Krishna Gudipati2010-03-079-59/+178
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changed PCI VPD to incorporate specific OEM vendors. Added FCoE specific interrupt latency and delay params. Added some variables needed by FIP 2.0. Added some new logging and tracing definitions. Added reserved members to make the structures (IOC, IOCFC) 64bit aligned. Changed the module identifiers, as some files were moved. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>