summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-dw-mid.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* spi: dw-mid: switch to new dmaengine_terminate_* APIAndy Shevchenko2016-02-051-2/+2
| | | | | | | Convert dmaengine_terminate_all() calls to synchronous versions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: constify dw_spi_dma_ops structureJulia Lawall2015-11-301-1/+1
| | | | | | | | | | The dw_spi_dma_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-spi: Convert 16bit accesses to 32bit accessesThor Thayer2015-03-171-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Altera's Arria10 SoC interconnect requires a 32-bit write for APB peripherals. The current spi-dw driver uses 16-bit accesses in some locations. This patch converts all the 16-bit reads and writes to 32-bit reads and writes. Additional Documentation to Support this Change: The DW_apb_ssi databook states: "All registers in the DW_apb_ssi are addressed at 32-bit boundaries to remain consistent with the AHB bus. Where the physical size of any register is less than 32-bits wide, the upper unused bits of the 32-bit boundary are reserved. Writing to these bits has no effect; reading from these bits returns 0." [1] [1] Section 6.1 of dw_apb_ssi.pdf (version 3.22a) Request for test with platforms using the DesignWare SPI IP. Tested On: Altera CycloneV development kit Altera Arria10 development kit Compile tested for build errors on x86_64 (allyesconfigs) Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Reviewed-and-tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: convert to use dw_dmac instead of intel_mid_dmaAndy Shevchenko2015-03-091-26/+19
| | | | | | | | | intel_mid_dma seems to be unmaintained for a long time. Moreover, the IP block of DMA itself is the same in both dw_dmac and intel_mid_dma. This patch moves spi-dw-midpci to use dw_dmac driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: move to use core SPI DMA mappingsAndy Shevchenko2015-03-091-22/+30
| | | | | | | | SPI core has a comprehensive function set to map and unmap a message when it's needed. This patch converts driver to use that advantage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: clear ongoing DMA transfers on timeoutAndy Shevchenko2015-03-091-0/+13
| | | | | | | This patch shuts up any ongoing DMA transfer in case of error. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: take care of FIFO overrun/underrun when do DMAAndy Shevchenko2015-03-091-0/+21
| | | | | | | | | | | | | In according to documentation SPI in DMA mode may encounter underrun/overrun failures in rare cases. When such failure occurs, an error recovery protocol is expected to be implemented in the device driver so that the failed transaction can be restarted. This patch enables FIFO overrun / underrun interrupts in DMA case and adds a handler for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: split dma_setup() from dma_transfer()Andy Shevchenko2015-03-091-11/+6
| | | | | | | | | | | The patch splits DMA preparatory code to dma_setup() callback. The change also converts transfer_one() to program DMA whenever the transfer is DMA mapped. The change is a follow up of the converion to use SPI core transfer_one_message(). Since the DMA mapped transfers can be interleaved with PIO ones the DMA related configuration should respect that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: convert value of dma_width to enum dma_slave_buswidthAndy Shevchenko2015-03-091-2/+11
| | | | | | | | DMAEngine has a specific type to be used for bus width. This patch converts the code to use the values of the specific type when configure DMA transfer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'fix/dw' of ↵Mark Brown2015-03-091-2/+10
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-dw
| * spi: dw-mid: clear BUSY flag fist and test other oneAndy Shevchenko2015-03-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The logic of DMA completion is broken now since test_and_clear_bit() never returns the other bit is set. It means condition are always false and we have spi_finalize_current_transfer() called per each DMA completion which is wrong. The patch fixes logic by clearing BUSY bit first and then check for the other one. Fixes: 30c8eb52cc4a (spi: dw-mid: split rx and tx callbacks when DMA) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * spi: dw-mid: avoid potential NULL dereferenceAndy Shevchenko2015-03-061-0/+6
| | | | | | | | | | | | | | | | | | | | When DMA descriptor allocation fails we should not try to assign any fields in the bad descriptor. The patch adds the necessary checks for that. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* | spi: dw: move to SPI core message handlingAndy Shevchenko2015-03-061-2/+2
|/ | | | | | | | This patch removes a lot of duplicate code since SPI core provides a nice message handling. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: get a proper clock frequency for SPI2Andy Shevchenko2015-01-271-5/+8
| | | | | | | | | | | The clock information is being kept in the custom register on Intel MID platforms. Each controller has its own dedicated custom register for that. Thus, to get a proper frequency we have to read value from the specific offset to the register block. This patch makes this happen. Fixes: d58cf5ff6500 (spi: dw-pci: describe Intel MID controllers better) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-pci: describe Intel MID controllers betterAndy Shevchenko2015-01-071-2/+0
| | | | | | | | | | | | | | | | There are more that one SPI controller on the Intel MID boards. This patch describes the status and IDs of them. From now on we also have to care about bus number that must be unique per host. According to the specification the SPI1 has 5 bits for chip selects and SPI2 only 2 bits. The patch makes it depend to PCI ID. The first controller (SPI1) is DMA capable, meanwhile SPI2 can share same channels (via software switch) such functionality is not in the scope of this patch. Thus, attempt to init DMA for SPI2 will always fail for now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: fix FIFO sizeAndy Shevchenko2015-01-051-1/+0
| | | | | | | | | | | The FIFO size is 40 accordingly to the specifications, but this means 0x40, i.e. 64 bytes. This patch fixes the typo and enables FIFO size autodetection for Intel MID devices. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* spi: dw-mid: split rx and tx callbacks when DMAAndy Shevchenko2014-10-281-14/+39
| | | | | | | | | Currently driver wouldn't work properly if user asked for simplex transfer. The patch separates DMA rx and tx callbacks and finishes transfer correctly in any case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: refactor to use helpersAndy Shevchenko2014-10-281-21/+48
| | | | | | | | | | | This patch splits few helpers, namely dw_spi_dma_prepare_rx(), dw_spi_dma_prepare_tx(), and dw_spi_dma_setup() which will be useful for the consequent improvements. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: follow new DMAengine workflowAndy Shevchenko2014-10-021-2/+6
| | | | | | | | | | | | | | Though intel-mid-dma does not follow a new DMA workflow (*) let's prepare SPI DW driver for that. (*) The client is obliged to call dma_async_issue_pending() which starts the actual transfers. Old DMA drivers do not follow this, since requirement was introduced in the discussion of [1]. [1] http://www.spinics.net/lists/arm-kernel/msg125987.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: convert to use DMAengine wrappersAndy Shevchenko2014-10-021-12/+7
| | | | | | | | Instead of direct dereference to dmaengine callbacks we are going to use DMAengine wrappers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: change magic numbers to the constantsAndy Shevchenko2014-10-021-2/+2
| | | | | | | | | | Instead of using magic numbers in the code we create a bit map definition of the DMACR register and use it. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: terminate ongoing transfers at exitAndy Shevchenko2014-09-241-0/+4
| | | | | | | | Do full clean up at exit, means terminate all ongoing DMA transfers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* spi: dw-mid: respect 8 bit modeAndy Shevchenko2014-09-241-2/+2
| | | | | | | | | In case of 8 bit mode and DMA usage we end up with every second byte written as 0. We have to respect bits_per_word settings what this patch actually does. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* spi: dw-mid: remove FSF address and update copyrightAndy Shevchenko2014-09-131-5/+1
| | | | | | | | The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: remove redundant dmac memberAndy Shevchenko2014-09-131-4/+8
| | | | | | | | Instead of using that member we prefer to use dma_dev which represents actual struct device of the DMA device. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: remove Moorestown supportAndy Shevchenko2014-09-131-5/+3
| | | | | | | | | | The support of the Moorestown was removed [1] from kernel long time ago. This is just a follow up of that change. [1] http://www.spinics.net/lists/platform-driver-x86/msg02948.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: check that DMA was inited before exitAndy Shevchenko2014-09-131-0/+2
| | | | | | | | | If the driver was compiled with DMA support, but DMA channels weren't acquired by some reason, mid_spi_dma_exit() will crash the kernel. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* dmaengine: remove DMA unmap flagsBartlomiej Zolnierkiewicz2013-11-141-2/+2
| | | | | | | | | | | | | | | | | | Remove no longer needed DMA unmap flags: - DMA_COMPL_SKIP_SRC_UNMAP - DMA_COMPL_SKIP_DEST_UNMAP - DMA_COMPL_SRC_UNMAP_SINGLE - DMA_COMPL_DEST_UNMAP_SINGLE Cc: Vinod Koul <vinod.koul@intel.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jon Mason <jon.mason@intel.com> Acked-by: Mark Brown <broonie@linaro.org> [djbw: clean up straggling skip unmap flags in ntb] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
* dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine2012-03-211-2/+2
| | | | | | | | | | Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
* dmaengine: Pass dma_slave_config .device_fc = NULL for all existing usersViresh Kumar2012-02-221-0/+3
| | | | | | | | | | .device_fc is added in struct dma_slave_config recently. All user drivers, which want DMA to be the flow controller must pass this field as false. As earlier driver don't look to use this feature, mark it false for now. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
* Merge branch 'dma_slave_direction' into next_test_dirnVinod Koul2011-11-171-4/+4
|\ | | | | | | | | resolved conflicts: drivers/media/video/mx3_camera.c
| * spi, serial: move to dma_transfer_directionVinod Koul2011-10-311-4/+4
| | | | | | | | | | | | | | | | | | | | fixup usage of dma direction by introducing dma_transfer_direction, this patch moves spi, serial drivers to use new enum Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Cox <alan@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
* | spi: spi-dw: fix all sparse warningsH Hartley Sweeten2011-09-211-4/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dw_{read,write}[lw] macros produce sparse warnings everytime they are used. The "read" ones cause: warning: cast removes address space of expression warning: incorrect type in argument 1 (different address spaces) expected void const volatile [noderef] <asn:2>*addr got unsigned int *<noident> And the "write" ones: warning: cast removes address space of expression warning: incorrect type in argument 2 (different address spaces) expected void volatile [noderef] <asn:2>*addr got unsigned int *<noident> Fix this by removing struct dw_spi_reg and converting all the register offsets to #defines. Then convert the macros into inlined functions so that proper type checking can occur. While here, also fix the three sparse warnings in spi-dw-mid.c due to the return value of ioremap_nocache being stored in a u32 * not a void __iomem *. With these changes the spi-dw* files all build with no sparse warnings. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* spi: reorganize driversGrant Likely2011-06-061-0/+224
Sort the SPI makefile and enforce the naming convention spi_*.c for spi drivers. This change also rolls the contents of atmel_spi.h into the .c file since there is only one user of that particular include file. v2: - Use 'spi-' prefix instead of 'spi_' to match what seems to be be the predominant pattern for subsystem prefixes. - Clean up filenames in Kconfig and header comment blocks Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 11:49:21 +0100