summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-dw-mid.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* spi: dw: Move Non-DMA code to the DW PCIe-SPI driverSerge Semin2020-05-291-529/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Use DMA max burst to set the request thresholdsSerge Semin2020-05-291-4/+33
| | | | | | | | | | | | | | | | | | | | | | | | Each channel of DMA controller may have a limited length of burst transaction (number of IO operations performed at ones in a single DMA client request). This parameter can be used to setup the most optimal DMA Tx/Rx data level values. In order to avoid the Tx buffer overrun we can set the DMA Tx level to be of FIFO depth minus the maximum burst transactions length. To prevent the Rx buffer underflow the DMA Rx level should be set to the maximum burst transactions length. This commit setups the DMA channels and the DW SPI DMA Tx/Rx levels in accordance with these rules. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Parameterize the DMA Rx/Tx burst lengthSerge Semin2020-05-291-4/+6
| | | | | | | | | | | | | | | | | | | | | | It isn't good to have numeric literals in the code especially if there are multiple of them and they are related. Let's replace the Tx and Rx burst level literals with the corresponding constants. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-7-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Add SPI Rx-done wait method to DMA-based transferSerge Semin2020-05-291-1/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Having any data left in the Rx FIFO after the DMA engine claimed it has finished all DMA transactions is an abnormal situation, since the DW SPI controller driver expects to have all the data being fetched and placed into the SPI Rx buffer at that moment. In case if that has happened we hopefully assume that the DMA engine may still be doing the data fetching, thus we give it sometime to finish. If after a short period of time the data is still left in the Rx FIFO, the driver will give up waiting and return an error indicating that the SPI controller/DMA engine must have hung up or failed at some point of doing their duties. Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support") Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Add SPI Tx-done wait method to DMA-based transferSerge Semin2020-05-291-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | Since DMA transfers are performed asynchronously with actual SPI bus transfers, then even if DMA transactions are finished it doesn't mean all data is actually pushed to the SPI bus. Some data might still be in the controller FIFO. This is specifically true for Tx-only transfers. In this case if the next SPI transfer is recharged while a tail of the previous one is still in FIFO, we'll loose that tail data. In order to fix that problem let's add the wait procedure of the Tx SPI transfer completion after the DMA transactions are finished. Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support") Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Locally wait for the DMA transfers completionSerge Semin2020-05-291-4/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In general each DMA-based SPI transfer can be split up into two stages: DMA data transmission/reception and SPI-bus transmission/reception. DMA asynchronous transactions completion can be tracked by means of the DMA async Tx-descriptor completion callback. But that callback being called indicates that the DMA transfer has been finished, it doesn't mean that SPI data transmission is also done. Moreover in fact it isn't for at least Tx-only SPI transfers. Upon DMA transfer completion some data is left in the Tx FIFO and being pushed out by the SPI controller. So in order to make sure that an SPI transfer is completely pushed to the SPI-bus, the driver has to wait for both DMA transaction and the SPI-bus transmission/reception are finished. Note if there is a way to asynchronously track the former event by means of the DMA async Tx callback, there isn't easy one for the later (IRQ-based solution won't work since SPI controller doesn't notify about Rx FIFO being empty). The DMA transfer completion callback isn't suitable to wait for the SPI controller activity finish either. The callback might (in case of DW DMAC it will) be called in the tasklet context. Waiting for the SPI controller to complete the transfer might take a considerable amount of time since SPI-bus might be pretty slow. In this case delaying the execution in the tasklet atomic context might cause significant system performance drop. So to speak the best option we've got to solve the problem is to consequently wait for both stages being finished in the locally implemented SPI transfer execution procedure even if it costs us of the local wait-function re-implementation. In this case we don't need to use the SPI-core transfer-wait functionality, but we'll make sure that all DMA and SPI-bus transactions are completely finished before the SPI-core transfer_one callback returns. In this commit we provide an implementation of the DMA-transfers completion wait functionality. The DW APB SSI DMA-specific SPI transfer_one function waits for both Tx and Rx DMA transfers being finished, and only then exits with zero returned signalling to the SPI core that the SPI transfer is finished. This implementation is fully equivalent to the currently used DMA-execution-SPI-core-wait algorithm. The SPI-bus transmission/reception wait methods will be added in the follow-up commits. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Return any value retrieved from the dma_transfer callbackSerge Semin2020-05-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | DW APB SSI DMA-part of the driver may need to perform the requested SPI-transfer synchronously. In that case the dma_transfer() callback will return 0 as a marker of the SPI transfer being finished so the SPI core doesn't need to wait and may proceed with the SPI message trasnfers pumping procedure. This will be needed to fix the problem when DMA transactions are finished, but there is still data left in the SPI Tx/Rx FIFOs being sent/received. But for now make dma_transfer to return 1 as the normal dw_spi_transfer_one() method. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Discard dma_width member of the dw_spi structureSerge Semin2020-05-221-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This member has exactly the same value as n_bytes of the DW SPI private data object, it's calculated at the same point of the transfer method, n_bytes isn't changed during the whole transfer, and they even serve for the same purpose - keep number of bytes per transfer word, though the dma_width is used only to calculate the DMA source/destination addresses width, which n_bytes could be also utilized for. Taking all of these into account let's replace the dma_width member usage with n_bytes one and remove the former. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Discard static DW DMA slave structuresSerge Semin2020-05-221-11/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having them declared is redundant since each struct dw_dma_chan has the same structure embedded and the structure from the passed dma_chan private pointer will be copied there as a result of the next calls chain: dma_request_channel() -> find_candidate() -> dma_chan_get() -> device_alloc_chan_resources() = dwc_alloc_chan_resources() -> dw_dma_filter(). So just remove the static dw_dma_chan structures and use a locally declared data instance with dst_id/src_id set to the same values as the static copies used to have. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Co-developed-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Enable interrupts in accordance with DMA xfer modeSerge Semin2020-05-221-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Paul Burton <paulburton@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200522000806.7381-3-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Clear DMAC register when done or stoppedSerge Semin2020-05-151-0/+8
| | | | | | | | | | | | | | | | | | If DMAC register is left uncleared any further DMAless transfers may cause the DMAC hardware handshaking interface getting activated. So the next DMA-based Rx/Tx transaction will be started right after the dma_async_issue_pending() method is invoked even if no DMATDLR/DMARDLR conditions are met. This at the same time may cause the Tx/Rx FIFO buffers underrun/overrun. In order to fix this we must clear DMAC register after a current DMA-based transaction is finished. Co-developed-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200515104758.6934-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Get rid of dma_inited flagAndy Shevchenko2020-05-071-14/+14
| | | | | | | | | | | | This flag is superfluous in all cases where it's being used, i.e. * ->can_dma() won't be called without dma_inited == 1 * DMA ->exit() callback can rely on txchan and rxchan variables So, get rid of dma_inited flag. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200507115449.8093-2-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Avoid useless assignments in generic DMA setupAndy Shevchenko2020-05-071-2/+0
| | | | | | | | | Generic DMA setup doesn't rely on certain type of DMA controller and thus shouldn't use Intel Medfield settings, although it's harmless in this case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200507115449.8093-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Add Elkhart Lake PSE DMA supportJarkko Nikula2020-05-061-0/+44
| | | | | | | | | | | | | Elkhart Lake PSE SPI is capable to utilize PSE DMA engine which is described in ACPI. With help of acpi-dma module the support becomes a generic one. Thus, add Elkhart Lake PSE DMA support and generic DMA hooks in SPI DesignWare driver. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-8-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Propagate struct device pointer to ->dma_init() callbackAndy Shevchenko2020-05-061-1/+1
| | | | | | | | | | In some cases, one of which is coming soon, we would like to have a struct device pointer to request DMA channel. For this purpose propagate it to ->dma_init() callback in DMA ops. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-7-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Add 'mfld' suffix to Intel Medfield related routinesAndy Shevchenko2020-05-061-10/+14
| | | | | | | | | | | | | | In order to prepare driver for the extension to support newer hardware, add 'mfld' suffix to some related functions. While here, move DMA parameters assignment under existing #ifdef CONFIG_SPI_DW_MID_DMA. There is no functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-6-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Move few headers under #ifdef CONFIG_SPI_DW_MID_DMAAndy Shevchenko2020-05-061-3/+2
| | | | | | | | | | | There is no user of few headers without CONFIG_SPI_DW_MID_DMA being set. Move them under condition. While at it, remove unused slab.h there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-5-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Downgrade interrupt.h to irqreturn.h where appropriateAndy Shevchenko2020-05-061-1/+1
| | | | | | | | | | | | | spi-dw-mid.c along with spi-dw.h are direct users of irqreturn.h and nothing else is being used from interrupt.h. So, switch them to use the former instead of latter one. While here, move the header under #ifdef CONFIG_SPI_DW_MID_DMA in spi-dw-mid.c. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-4-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Zero DMA Tx and Rx configurations on stackAndy Shevchenko2020-05-061-0/+2
| | | | | | | | | | | | | | Some DMA controller drivers do not tolerate non-zero values in the DMA configuration structures. Zero them to avoid issues with such DMA controller drivers. Even despite above this is a good practice per se. Fixes: 7063c0d942a1 ("spi/dw_spi: add DMA support") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Feng Tang <feng.tang@intel.com> Cc: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw: Add update_cr0() callback to update CTRLR0Wan Ahmad Zainie2020-05-051-0/+4
| | | | | | | | | | | | | This patch adds update_cr0() callback, in struct dw_spi. Existing code that configure register CTRLR0 is moved into a new function, dw_spi_update_cr0(), and this will be the default. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200505130618.554-3-wan.ahmad.zainie.wan.mohamad@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
* remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig2020-01-061-1/+1
| | | | | | | | ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner2019-06-051-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* spi: dw: Convert to generalized SPI controller APIJarkko Nikula2018-02-121-3/+3
| | | | | | | | | | Convert to generalized SPI controller API introduced by the commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller""). Inside driver variable name "master" is still used to indicate the driver is master only. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: switch to new dmaengine_terminate_* API (part 2)Andy Shevchenko2017-01-041-2/+2
| | | | | | | | | | | The commit a3ff9582369e ("spi: dw-mid: switch to new dmaengine_terminate_* API") converted mid_spi_dma_exit() but missed mid_spi_dma_stop(). This is follow up to convert the rest. Fixes: a3ff9582369e ("spi: dw-mid: switch to new dmaengine_terminate_* API") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: switch to new dmaengine_terminate_* APIAndy Shevchenko2016-02-051-2/+2
| | | | | | | Convert dmaengine_terminate_all() calls to synchronous versions. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: constify dw_spi_dma_ops structureJulia Lawall2015-11-301-1/+1
| | | | | | | | | | The dw_spi_dma_ops structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-spi: Convert 16bit accesses to 32bit accessesThor Thayer2015-03-171-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Altera's Arria10 SoC interconnect requires a 32-bit write for APB peripherals. The current spi-dw driver uses 16-bit accesses in some locations. This patch converts all the 16-bit reads and writes to 32-bit reads and writes. Additional Documentation to Support this Change: The DW_apb_ssi databook states: "All registers in the DW_apb_ssi are addressed at 32-bit boundaries to remain consistent with the AHB bus. Where the physical size of any register is less than 32-bits wide, the upper unused bits of the 32-bit boundary are reserved. Writing to these bits has no effect; reading from these bits returns 0." [1] [1] Section 6.1 of dw_apb_ssi.pdf (version 3.22a) Request for test with platforms using the DesignWare SPI IP. Tested On: Altera CycloneV development kit Altera Arria10 development kit Compile tested for build errors on x86_64 (allyesconfigs) Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Reviewed-and-tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: convert to use dw_dmac instead of intel_mid_dmaAndy Shevchenko2015-03-091-26/+19
| | | | | | | | | intel_mid_dma seems to be unmaintained for a long time. Moreover, the IP block of DMA itself is the same in both dw_dmac and intel_mid_dma. This patch moves spi-dw-midpci to use dw_dmac driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: move to use core SPI DMA mappingsAndy Shevchenko2015-03-091-22/+30
| | | | | | | | SPI core has a comprehensive function set to map and unmap a message when it's needed. This patch converts driver to use that advantage. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: clear ongoing DMA transfers on timeoutAndy Shevchenko2015-03-091-0/+13
| | | | | | | This patch shuts up any ongoing DMA transfer in case of error. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: take care of FIFO overrun/underrun when do DMAAndy Shevchenko2015-03-091-0/+21
| | | | | | | | | | | | | In according to documentation SPI in DMA mode may encounter underrun/overrun failures in rare cases. When such failure occurs, an error recovery protocol is expected to be implemented in the device driver so that the failed transaction can be restarted. This patch enables FIFO overrun / underrun interrupts in DMA case and adds a handler for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: split dma_setup() from dma_transfer()Andy Shevchenko2015-03-091-11/+6
| | | | | | | | | | | The patch splits DMA preparatory code to dma_setup() callback. The change also converts transfer_one() to program DMA whenever the transfer is DMA mapped. The change is a follow up of the converion to use SPI core transfer_one_message(). Since the DMA mapped transfers can be interleaved with PIO ones the DMA related configuration should respect that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: convert value of dma_width to enum dma_slave_buswidthAndy Shevchenko2015-03-091-2/+11
| | | | | | | | DMAEngine has a specific type to be used for bus width. This patch converts the code to use the values of the specific type when configure DMA transfer. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* Merge branch 'fix/dw' of ↵Mark Brown2015-03-091-2/+10
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-dw
| * spi: dw-mid: clear BUSY flag fist and test other oneAndy Shevchenko2015-03-071-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The logic of DMA completion is broken now since test_and_clear_bit() never returns the other bit is set. It means condition are always false and we have spi_finalize_current_transfer() called per each DMA completion which is wrong. The patch fixes logic by clearing BUSY bit first and then check for the other one. Fixes: 30c8eb52cc4a (spi: dw-mid: split rx and tx callbacks when DMA) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
| * spi: dw-mid: avoid potential NULL dereferenceAndy Shevchenko2015-03-061-0/+6
| | | | | | | | | | | | | | | | | | | | When DMA descriptor allocation fails we should not try to assign any fields in the bad descriptor. The patch adds the necessary checks for that. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* | spi: dw: move to SPI core message handlingAndy Shevchenko2015-03-061-2/+2
|/ | | | | | | | This patch removes a lot of duplicate code since SPI core provides a nice message handling. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: get a proper clock frequency for SPI2Andy Shevchenko2015-01-271-5/+8
| | | | | | | | | | | The clock information is being kept in the custom register on Intel MID platforms. Each controller has its own dedicated custom register for that. Thus, to get a proper frequency we have to read value from the specific offset to the register block. This patch makes this happen. Fixes: d58cf5ff6500 (spi: dw-pci: describe Intel MID controllers better) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-pci: describe Intel MID controllers betterAndy Shevchenko2015-01-071-2/+0
| | | | | | | | | | | | | | | | There are more that one SPI controller on the Intel MID boards. This patch describes the status and IDs of them. From now on we also have to care about bus number that must be unique per host. According to the specification the SPI1 has 5 bits for chip selects and SPI2 only 2 bits. The patch makes it depend to PCI ID. The first controller (SPI1) is DMA capable, meanwhile SPI2 can share same channels (via software switch) such functionality is not in the scope of this patch. Thus, attempt to init DMA for SPI2 will always fail for now. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: fix FIFO sizeAndy Shevchenko2015-01-051-1/+0
| | | | | | | | | | | The FIFO size is 40 accordingly to the specifications, but this means 0x40, i.e. 64 bytes. This patch fixes the typo and enables FIFO size autodetection for Intel MID devices. Fixes: 7063c0d942a1 (spi/dw_spi: add DMA support) Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* spi: dw-mid: split rx and tx callbacks when DMAAndy Shevchenko2014-10-281-14/+39
| | | | | | | | | Currently driver wouldn't work properly if user asked for simplex transfer. The patch separates DMA rx and tx callbacks and finishes transfer correctly in any case. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: refactor to use helpersAndy Shevchenko2014-10-281-21/+48
| | | | | | | | | | | This patch splits few helpers, namely dw_spi_dma_prepare_rx(), dw_spi_dma_prepare_tx(), and dw_spi_dma_setup() which will be useful for the consequent improvements. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: follow new DMAengine workflowAndy Shevchenko2014-10-021-2/+6
| | | | | | | | | | | | | | Though intel-mid-dma does not follow a new DMA workflow (*) let's prepare SPI DW driver for that. (*) The client is obliged to call dma_async_issue_pending() which starts the actual transfers. Old DMA drivers do not follow this, since requirement was introduced in the discussion of [1]. [1] http://www.spinics.net/lists/arm-kernel/msg125987.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: convert to use DMAengine wrappersAndy Shevchenko2014-10-021-12/+7
| | | | | | | | Instead of direct dereference to dmaengine callbacks we are going to use DMAengine wrappers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: change magic numbers to the constantsAndy Shevchenko2014-10-021-2/+2
| | | | | | | | | | Instead of using magic numbers in the code we create a bit map definition of the DMACR register and use it. There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: terminate ongoing transfers at exitAndy Shevchenko2014-09-241-0/+4
| | | | | | | | Do full clean up at exit, means terminate all ongoing DMA transfers. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* spi: dw-mid: respect 8 bit modeAndy Shevchenko2014-09-241-2/+2
| | | | | | | | | In case of 8 bit mode and DMA usage we end up with every second byte written as 0. We have to respect bits_per_word settings what this patch actually does. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
* spi: dw-mid: remove FSF address and update copyrightAndy Shevchenko2014-09-131-5/+1
| | | | | | | | The FSF address is subject to change, thus remove it from the file. While here, update a copyright line. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: remove redundant dmac memberAndy Shevchenko2014-09-131-4/+8
| | | | | | | | Instead of using that member we prefer to use dma_dev which represents actual struct device of the DMA device. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* spi: dw-mid: remove Moorestown supportAndy Shevchenko2014-09-131-5/+3
| | | | | | | | | | The support of the Moorestown was removed [1] from kernel long time ago. This is just a follow up of that change. [1] http://www.spinics.net/lists/platform-driver-x86/msg02948.html Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 06:08:27 +0100