summaryrefslogtreecommitdiffstats
path: root/drivers/spi/spi-pl022.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* spi: pl022: Fix incorrect dma_unmap_sgRay Jui2014-10-131-1/+1
| | | | | | | | | | When mapped RX DMA entries are unmapped in an error condition when DMA is firstly configured in the driver, the number of TX DMA entries was passed in, which is incorrect Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
*-. Merge remote-tracking branches 'spi/topic/pl022', 'spi/topic/pxa2xx', ↵Mark Brown2014-10-031-1/+63
|\ \ | | | | | | | | | 'spi/topic/rspi', 'spi/topic/sh-msiof' and 'spi/topic/sirf' into spi-next
| * | spi: pl022: Add support for chip select extensionAnders Berg2014-09-241-1/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a extended PL022 which has an extra register for controlling up to five chip select signals. This controller is found on the AXM5516 SoC. Unfortunately the PrimeCell identification registers are identical to a standard ARM PL022. To work around this, the peripheral ID must be overridden in the device tree using the "arm,primecell-periphid" property with the value 0x000b6022. Signed-off-by: Anders Berg <anders.berg@avagotech.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Mark Brown <broonie@kernel.org>
| * | spi: pl022: Add missing error check for devm_kzallocKiran Padwal2014-09-181-0/+5
| |/ | | | | | | | | | | | | | | | | | | Currently this driver is missing a check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. This patch adds a missing check. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
* / spi/pl022: Fix error messageRoland Stigge2014-09-091-1/+1
|/ | | | | | | This patch fixes an error message typo ("not" missing). Signed-off-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi/pl022: Explicitly truncate large bitmaskMark Brown2014-08-011-1/+1
| | | | | | | | | When building on 64 bit architectures the use of bitwise negation generates constants larger than 32 bits which won't fit in u32s used to represent 32 bit register values on the device. Explicitly cast to let the compiler know that the higher bits are not significant and can be discarded. Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: pl022: remove unnecessary OOM messagesJingoo Han2014-04-291-10/+3
| | | | | | | | The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
*-. Merge remote-tracking branches 'spi/topic/omap-uwire', 'spi/topic/omap100k', ↵Mark Brown2014-03-301-52/+23
|\ \ | | | | | | | | | 'spi/topic/omap2', 'spi/topic/orion', 'spi/topic/pl022', 'spi/topic/qup', 'spi/topic/rspi' and 'spi/topic/s3c24xx' into spi-next
| | * spi: pl022: Don't ignore power domain and amba bus at system suspendUlf Hansson2014-03-061-36/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously only the resources controlled by the driver were put into low power state at system suspend. Both the amba bus and a potential power domain were ignored. Moreover, while putting the device into low power state we first brought it back to full power, but for no particular reason. To handle both issues above, use pm_runtime_force_suspend|resume() from the system suspend|resume callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * spi: pl022: Let runtime PM callbacks be available for CONFIG_PMUlf Hansson2014-03-061-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert to the SET_PM_RUNTIME_PM macro while defining the runtime PM callbacks. This means the callbacks becomes available for both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME, which is needed to handle the combinations of these scenarios. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * spi: pl022: Remove redundant pinctrl to default state in probeUlf Hansson2014-02-041-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | The driver core is now taking care of putting our pins into default state at probe. Thus we can remove the redundant call for it in probe. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * spi: pl022: Simplify clock handlingUlf Hansson2014-02-041-12/+3
| | | | | | | | | | | | | | | | | | | | | | | | Make use of clk_prepare_enable and clk_disable_unprepare to simplify code. No functional change. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
| | * spi/pl022: Unprepare clocks while suspendedMark Brown2014-02-031-2/+2
| |/ | | | | | | | | | | | | | | | | | | When the driver was converted to clk_prepare() the suspend path didn't have any changes made so the clock remains prepared throughout the runtime of the driver. Unprepare it when suspended so that any savings that can be made as a result are made. Signed-off-by: Mark Brown <broonie@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org>
* / spi: Use list_last_entry at appropriate placesAxel Lin2014-02-231-3/+2
|/ | | | | Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* Merge remote-tracking branch 'spi/topic/pl022' into spi-nextMark Brown2013-10-251-2/+2
|\
| * spi: pl022: Use dev_info() instead of printk()Jingoo Han2013-10-141-2/+2
| | | | | | | | | | | | | | | | | | Change raw printk() call to dev_info() to provide a better message to userspace so it can properly identify the device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
* | spi: pl022: use devm_spi_register_master()Jingoo Han2013-09-261-2/+1
|/ | | | | | | | Use devm_spi_register_master() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: pl022: remove unnecessary amba_set_drvdata()Jingoo Han2013-09-171-1/+0
| | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* spi: pl022: Remove redundant breakSachin Kamat2013-09-171-2/+0
| | | | | | | | 'break' immediately after return has no effect. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
* Merge remote-tracking branch 'spi/topic/qspi' into spi-nextMark Brown2013-09-011-20/+1
|\
| * spi/pl022: Convert to core runtime PMMark Brown2013-07-291-20/+1
| | | | | | | | | | Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
* | Merge remote-tracking branch 'spi/topic/pl022' into spi-nextMark Brown2013-09-011-2/+2
|\ \
| * | spi: spi-pl022: Fix warning when CONFIG_ARM_LPAE=yFabio Estevam2013-08-221-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | When CONFIG_ARM_LPAE=y the following build warning is generated: drivers/spi/spi-pl022.c:2178:9: warning: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' [-Wformat] According to Documentation/printk-formats.txt '%pa' can be used to properly print 'resource_size_t'. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* / spi: use dev_get_platdata()Jingoo Han2013-08-291-1/+2
|/ | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Mark Brown <broonie@linaro.org>
* Merge tag 'pinctrl-for-v3.11-1' of ↵Linus Torvalds2013-07-031-62/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control changes from Linus Walleij: - A large slew of improvements of the Genric pin configuration support, and deployment in four different platforms: Rockchip, Super-H PFC, ABx500 and TZ1090. Support BIAS_BUS_HOLD, get device tree parsing and debugfs support into shape. - We also have device tree support with generic naming conventions for the generic pin configuration. - Delete the unused and confusing direct pinconf API. Now state transitions is *the* way to control pins and multiplexing. - New drivers for Rockchip, TZ1090, and TZ1090 PDC. - Two pin control states related to power management are now handled in the device core: "sleep" and "idle", removing a lot of boilerplate code in drivers. We do not yet know if this is the final word for pin PM, but it already make things a lot easier to handle. - Handle sparse GPIO ranges passing a list of disparate pins, and utilize these in the new BayTrail (x86 Atom SoC) driver. - Make the sunxi (AllWinner) driver handle external interrupts. - Make it possible for pinctrl-single to handle the case where several pins are managed by a single register, and augment it to handle sleep modes. - Cleanups and improvements for the abx500 drivers. - Move Sirf pin control drivers to their own directory, support save/restore of context and add support for the SiRFatlas6 SoC. - PMU muxing for the Dove pinctrl driver. - Finalization and support for VF610 in the i.MX6 pinctrl driver. - Smoothen out various Exynos rough edges. - Generic cleanups of various kinds. * tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits) pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe() pinctrl: remove bindings for pinconf options needing more thought pinctrl: remove slew-rate parameter from tz1090 pinctrl: set unit for debounce time pinconfig to usec pinctrl: more clarifications for generic pull configs pinctrl: rip out the direct pinconf API pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver pinctrl-tz1090: add TZ1090 pinctrl driver pinctrl: samsung: Staticize drvdata_list pinctrl: rockchip: Add missing irq_gc_unlock() call before return error pinctrl: abx500: rework error path pinctrl: abx500: suppress hardcoded value pinctrl: abx500: factorize code pinctrl: abx500: fix abx500_gpio_get() pinctrl: abx500: fix abx500_pin_config_set() pinctrl: abx500: Add device tree support sh-pfc: Guard DT parsing with #ifdef CONFIG_OF pinctrl: add Intel BayTrail GPIO/pinctrl support pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc pinctrl: Staticize local symbols ... Conflicts: drivers/net/ethernet/ti/davinci_mdio.c drivers/pinctrl/Makefile
| * spi: pl022: remove unused ret and pins_state variablesFabio Baltieri2013-06-171-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removes the warnings: drivers/spi/spi-pl022.c: In function 'pl022_suspend_resources': drivers/spi/spi-pl022.c:2322:24: warning: unused variable 'pins_state' [-Wunused-variable] drivers/spi/spi-pl022.c:2321:6: warning: unused variable 'ret' [-Wunused-variable] drivers/spi/spi-pl022.c: In function 'pl022_resume_resources': drivers/spi/spi-pl022.c:2334:6: warning: unused variable 'ret' [-Wunused-variable] introduced in: f1c9cf0 spi: pl022: use pinctrl PM helpers Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * spi: pl022: use pinctrl PM helpersLinus Walleij2013-06-161-57/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This utilize the new pinctrl core PM helpers to transition the driver to "sleep" and "idle" states, cutting away some boilerplate code. Cc: Hebbar Gururaja <gururaja.hebbar@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Kevin Hilman <khilman@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Wolfram Sang <wsa@the-dreams.de> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | spi: pl022: use DMA by default when probing from DTLinus Walleij2013-06-171-0/+1
|/ | | | | | | | | | | In the past we controlled the selection of DMA for a certain host by a boolean switch in the platform data. Currently there is no way to enable DMA on a PL022 probed from the device tree. Let's default to trying to obtain DMA channels in the DT case, and then we can always fail (and thus fall back to PIO mode). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* spi: pl022: use generic DMA slave configuration if possibleArnd Bergmann2013-03-121-2/+41
| | | | | | | | | | | | | | | | | | | | | With the new OF DMA binding, it is possible to completely avoid the need for platform_data for configuring a DMA channel. In cases where the platform has already been converted, calling dma_request_slave_channel should get all the necessary information from the device tree. Like the patch that converts the dw_dma controller, this is completely untested and is looking for someone to try it out. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: spi-devel-general@lists.sourceforge.net Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Vinod Koul <vinod.koul@linux.intel.com> Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org
* spi: Remove HOTPLUG section attributesGrant Likely2012-12-071-5/+4
| | | | | | | | | | | | | | CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Bill Pemberton has done most of the legwork on this series. I've used his script to purge the attributes from the drivers/gpio tree. Reported-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Merge tag 'spi-linus' into spi-nextMark Brown2012-10-231-4/+0
|\ | | | | | | | | | | | | | | | | | | | | spi: Fixes for v3.7 A bunch of fixes here, mostly minor except for the pl022 which has just been a bit of a shambles all round, the recent runtime PM changes have as far as I can tell never worked so they're just getting thrown out. Conflicts: drivers/spi/spi-pl022.c
| * spi/pl022: Revert recent runtime PM changesUlf Hansson2012-10-231-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Originally sent by Ulf as two changes, squashed down into one with a redone changelog, thanks to Russell King for analysis. -- broonie] This reverts commit 688723 (spi/pl022: enable runtime PM) and commit 2fb30d (spi/pl022: fix spi-pl022 pm enable at probe). Commit "spi/pl022: enable runtime PM" introduced runtime PM issues as it interacted badly with the work Russell King had done to move core runtime PM handling into the bus. Due to that commit, "spi/pl022: fix spi-pl022 pm enable at probe" was merged to fix part of those issues. Instead of adding another fix, let's clean up and revert everything back to when it was already fine. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Revert "spi/pl022: enable runtime PM" Conflicts: drivers/spi/spi-pl022.c
* | Merge branch 'spi-pl022' into spi-nextMark Brown2012-10-171-16/+36
|\ \
| * | spi/pl022: add IDLE state pin managementPatrice Chotard2012-10-171-13/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit allow to put pins in IDLE state in runtime_suspend and in SLEEP state in suspend, corresponding to defined semantics in <linux/pinctrl/pinctrl-state.h>. To do this, just add a boolean parameter runtime to pl022_resume_resources/pl022_suspend_resources which indicates if it's called from PM_RUNTIME callbacks or not. Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | spi/pl022: Activate resourses before deactivate them in suspendUlf Hansson2012-10-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To be able to deactivate resourses in suspend, the resourses must first be surely active. This is done with a pm_runtime_get_sync. Once the resourses are restored to active state again in resume, the runtime pm usage count can be decreased with a pm_runtime_put. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
| * | spi/pl022: Minor simplification for runtime pmUlf Hansson2012-10-171-3/+2
| |/ | | | | | | | | | | | | | | | | | | In probe pm_runtime_put_autosuspend has the same effect as doing pm_runtime_put. This due to upper layer in driver core is preventing the device from being runtime suspended by a pm_runtime_get*. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* / spi/pl022: Revert "spi/pl022: fix spi-pl022 pm enable at probe"Ulf Hansson2012-10-171-0/+1
|/ | | | | | | | | | | | | | | This reverts commit 6887237cd7da904184dab2750504040c68f3a080. Commit "spi/pl022: enable runtime PM" introduced runtime PM issues. Due to that commit, "spi/pl022: fix spi-pl022 pm enable at probe" was merged to fix part of those issues. Instead of adding another fix, let's clean up and revert everything back to when it was already fine. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* spi/pl022: get/put resources on suspend/resumeLinus Walleij2012-09-281-22/+44
| | | | | | | | | | | | | | | | | | This factors out the resource handling in runtime suspend/resume and also calls it from the ordinary suspend and resume hooks. The semantics require that ordinary PM op suspend is called with runtime PM in resumed mode, so that ordinary suspend can assume that it will e.g. decrease the clock reference counter to 0, runtime resume having previously increased it to 1. Cc: Vipul Kumar Samar <vipulkumar.samar@st.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* spi/pl022: use more managed resourcesLinus Walleij2012-09-281-21/+10
| | | | | | | | | This switches the PL022 SPI driver to use devm_* managed resources for IRQ, clocks, ioremap and GPIO. Prior to this, the GPIOs would even leak. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* Merge tag 'v3.6-rc6' into spi-driversMark Brown2012-09-251-1/+0
|\ | | | | | | | | | | | | Linux 3.6-rc6 Conflicts: drivers/spi/spi-omap2-mcspi.c
| * spi/pl022: fix spi-pl022 pm enable at probeMichel JAOUEN2012-08-171-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | amba drivers does not need to enable pm runtime at probe. amba_probe already enables pm runtime. This rids this warning in the ux500 boot log: ssp-pl022 ssp0: Unbalanced pm_runtime_enable! Signed-off-by: Michel JAOUEN <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | spi/pl022: Devicetree support w/o platform dataRoland Stigge2012-09-251-5/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even with devicetree support, we needed platform data to provide some data, leading to mixed device tree and platform data. This patch makes it possible to provide all that information via device tree. Now, the data must be provided via platform data _or_ device tree completely. Only in case of DMA where a callback specification is necessary (dma_filter()), platform data is the only option. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | spi/pl022: adopt pinctrl supportPatrice Chotard2012-09-201-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Amend the PL022 pin controller to optionally take a pin control handle and set the state of the pins to "default" on boot and runtime resume, and to "sleep" at runtime suspend. This way we will dynamically save power on the SPI busses, for example some electronic designs may be able to ground the pins when unused instead of pull-up. Some pin controllers may want to set the pins as wake-up sources when sleeping. Effect on platforms using the PL022 driver: - If the platform does not use pin control - no semantic effect, the pinctrl stubs will kick in and resolve the situation. - Platforms using this driver and have pin control but no function defined for the PL022 need to either supply a "default" function in their map or enable pinctrl dummies so the driver is satisfied. - Platforms using this driver with hogs for setting up the PL022 pin control - stop using hogs to take the pl022 pin control handle, let the driver handle this. I'be looked at some platforms that may be affected: - SPEAr: appears to define the proper functions in their device trees and not hogging them, so things should be smooth, the driver will simply start to take its pins. - Ux500: the proper function is defined and will be taken properly by the driver. New sleep states introduced by a separate patch to ux500 but no regression, since the default state is sufficient. - U300: old hog deleted as part of this patch. - LPC32xx: does not appear to be using pinctrl. - ARM Integrator IMPD1, RealView & Versatile: does not use pinctrl. Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: Patrice Chotard <patrice.chotard@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | spi/pl022: Fix chipselects pointer computationRoland Stigge2012-09-061-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new chip select handling via GPIO introduced a pointer computation bug: (int *) pl022 + sizeof(struct pl022) doesn't point to the data immediately after the actual struct pl022 (as was intended) but to a multiple of bytes after it because of the (int *) type. Replacing the kludgy pointer arithmetic with managed memory allocation for the chip selects. Reported-by: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | spi/pl022: Add devicetree supportRoland Stigge2012-08-221-9/+70
| | | | | | | | | | | | | | | | | | | | | | This patch adds device tree support to the spi-pl022 driver. Based on the initial patch by Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | spi/pl022: Add chip select handling via GPIORoland Stigge2012-08-221-14/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the ability for the driver to control the chip select directly. This enables independence from cs_control callbacks. Configurable via platform_data, to be extended as DT in the following patch. Based on the initial patch by Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* | spi/pl022: Fix device remove functionGuenter Roeck2012-08-221-1/+0
|/ | | | | | | | | | The call sequence spi_alloc_master/spi_register_master/spi_unregister_master is complete; it reduces the device reference count to zero, which results in device memory being freed. An extra call to spi_master_put is unnecessary and results in an access to free memory. Drop it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
* spi/pl022: enable runtime PMLinus Walleij2012-07-021-0/+4
| | | | | | | | | | If we're gonna use runtime PM it's a pretty good idea to actually enable it in probe() and disable it in remove() too, so it gets used for real. Up until now we only fooled around with the reference count. Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* spi/pl022: delete DB5500 supportLinus Walleij2012-07-021-14/+0
| | | | | | | | This ASIC variant has been deleted from the ARM tree, no need to keep support around. Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* spi/pl022: disable port when unusedVirupax Sadashivpetimath2012-07-021-0/+5
| | | | | | | | | | | | | Commit ffbbdd21329f3e15eeca6df2d4bc11c04d9d91c0 "spi: create a message queueing infrastructure" Accidentally deleted the logic to disable the port when unused leading to higher power consumption. Fix this up. Cc: stable@kernel.org Cc: Vinit Shenoy <vinit.shenoy@st.com> Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 10:40:45 +0100