summaryrefslogtreecommitdiffstats
path: root/drivers/spi (follow)
Commit message (Collapse)AuthorAgeFilesLines
* spi/gpio: fix section mismatch warningManuel Lauss2011-12-071-2/+2
| | | | | | | | | | | | | Fixes: The function __devinit spi_gpio_probe() references a function __init spi_gpio_alloc.isra.4(). If spi_gpio_alloc.isra.4 is only used by spi_gpio_probe then annotate spi_gpio_alloc.isra.4 with a matching annotation. [wsa: fix spi_gpio_request(), too] Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m buildJiri Slaby2011-12-071-2/+2
| | | | | | | | | | | | | | | | | | | When spi_fsl_espi is chosen to be built as a module, there is a build error because we test only CONFIG_SPI_FSL_ESPI in declaration of struct mpc8xxx_spi in drivers/spi/spi_fsl_lib.h. Also some called functions are not exported. So we forbid CONFIG_SPI_FSL_ESPI to be tristate here. The error looks like: drivers/spi/spi_fsl_espi.c: In function 'fsl_espi_bufs': drivers/spi/spi_fsl_espi.c:232: error: 'struct mpc8xxx_spi' has no member named 'len' ... Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Kumar Gala <galak@kernel.crashing.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* spi/nuc900: Include linux/module.hAxel Lin2011-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include linux/module.h to fix below build error: CC drivers/spi/spi-nuc900.o drivers/spi/spi-nuc900.c:484: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-nuc900.c:489: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:489: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:489: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-nuc900.c:489: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:490: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:490: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:490: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-nuc900.c:490: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:491: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:491: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:491: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-nuc900.c:491: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:492: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:492: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:492: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-nuc900.c:492: warning: function declaration isn't a prototype make[2]: *** [drivers/spi/spi-nuc900.o] Error 1 make[1]: *** [drivers/spi] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* spi/ath79: fix compile error due to missing includeGabor Juhos2011-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Whithout including 'linux/module.h' spi-ath79 driver fails to compile with the these errors: drivers/spi/spi-ath79.c:273:12: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-ath79.c:278:20: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:278:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:278:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-ath79.c:278:20: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:279:15: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:279:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:279:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-ath79.c:279:15: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:280:16: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:280:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:280:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-ath79.c:280:16: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:281:14: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:281:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:281:1: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-ath79.c:281:14: warning: function declaration isn't a prototype Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
* ARM: 7175/1: add subname parameter to mfp_set_groupg callersAxel Lin2011-11-261-1/+1
| | | | | | | | | | | | commit 798681bf "ARM: 7158/1: add new MFP implement for NUC900" adds subname parameter for mfp_set_groupg. Thus add subname parameter to the callers. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Wan Zongshun <mcuos.com@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* Merge branch 'fixes' of ↵Linus Torvalds2011-11-201-0/+8
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'fixes' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: wire up process_vm_writev and process_vm_readv syscalls ARM: 7160/1: setup: avoid overflowing {elf,arch}_name from proc_info_list ARM: 7158/1: add new MFP implement for NUC900 ARM: 7157/1: fix a building WARNING for nuc900 ARM: 7156/1: l2x0: fix compile error on !CONFIG_USE_OF ARM: 7155/1: arch.h: Declare 'pt_regs' locally ARM: 7154/1: mach-bcmring: fix build error in dma.c ARM: 7153/1: mach-bcmring: fix build error in core.c ARM: 7152/1: distclean: Remove generated .dtb files ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors ARM: 7149/1: spi/pl022: Enable clock in probe Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"
| * ARM: 7149/1: spi/pl022: Enable clock in probeUlf Hansson2011-11-081-0/+8
| | | | | | | | | | | | | | | | Make sure we enable the clock before leaving probe. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | atmel/spi: fix missing probeJean-Christophe PLAGNIOL-VILLARD2011-11-091-2/+3
|/ | | | | | | | | | | | | | | | | | Commit 940ab889 "drivercore: Add helper macro for platform_driver boilerplate" converted this driver to use module_platform_driver, but due to the use of platform_driver_probe(), this resulted in the call to atmel_spi_probe being lost. Place the call to this function into the driver structure. fix section missmatch atmel_spi_probe is marked __init where it's supposed to be __devinit atmel_spi_remove is marked __exit where it's supposed to be __devexit Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds2011-11-0719-0/+19
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
| * spi: Add export.h for THIS_MODULE/EXPORT_SYMBOL to spi.cPaul Gortmaker2011-11-011-0/+1
| | | | | | | | | | | | | | This uses both EXPORT_SYMBOL and THIS_MODULE, both which come from the export.h file now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
| * spi: Add module.h to implicit users in drivers/spiPaul Gortmaker2011-11-0118-0/+18
| | | | | | | | | | | | | | | | We are clipping down the presence of module.h, since it was everywhere. If you really need it, you better call it out, as per this changeset. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* | Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds2011-11-051-83/+92
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (63 commits) dmaengine: mid_dma: mask_peripheral_interrupt only when dmac is idle dmaengine/ep93xx_dma: add module.h include pch_dma: Reduce wasting memory pch_dma: Fix suspend issue dma/timberdale: free_irq() on an error path dma: shdma: transfer based runtime PM dmaengine: shdma: protect against the IRQ handler dmaengine i.MX DMA/SDMA: add missing include of linux/module.h dmaengine: delete redundant chan_id and chancnt initialization in dma drivers dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers serial: sh-sci: don't filter on DMA device, use only channel ID ARM: SAMSUNG: Remove Samsung specific enum type for dma direction ASoC: Samsung: Update DMA interface spi/s3c64xx: Merge dma control code spi/s3c64xx: Add support DMA engine API ARM: SAMSUNG: Remove S3C-PL330-DMA driver ARM: S5P64X0: Use generic DMA PL330 driver ARM: S5PC100: Use generic DMA PL330 driver ARM: S5PV210: Use generic DMA PL330 driver ... Fix up fairly trivial conflicts in - arch/arm/mach-exynos4/{Kconfig,clock.c} - arch/arm/mach-s5p64x0/dma.c
| * | spi/s3c64xx: Merge dma control codeBoojin Kim2011-09-141-64/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch modifies to merge the dma control code. Original s3c64xx spi driver has each dma control code for rx and tx channel. This patch merges these dma control codes into one. With this patch, a dma setup function and callback function handle for both rx and tx channel. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
| * | spi/s3c64xx: Add support DMA engine APIBoojin Kim2011-09-141-72/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds to support DMA generic API to transfer raw SPI data. Basiclly the spi driver uses DMA generic API if architecture supports it. Otherwise, uses Samsung specific S3C-PL330 APIs. Signed-off-by: Boojin Kim <boojin.kim@samsung.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
* | | Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2011-11-031-1/+1
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
| * | MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss2011-10-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | | Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2011-10-2931-483/+213
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'spi/next' of git://git.secretlab.ca/git/linux-2.6: drivercore: Add helper macro for platform_driver boilerplate spi: irq: Remove IRQF_DISABLED OMAP: SPI: Fix the trying to free nonexistent resource error spi/spi-ep93xx: add module.h include spi/tegra: fix compilation error in spi-tegra.c spi: spi-dw: fix all sparse warnings spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is true spi/spi-pl022: calculate_effective_freq() must set rate <= requested rate spi/spi-pl022: Don't allocate more sg than required. spi/spi-pl022: Use GFP_ATOMIC for allocation from tasklet spi/spi-pl022: Resolve formatting issues
| * | | drivercore: Add helper macro for platform_driver boilerplateGrant Likely2011-10-2525-318/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For simple modules that contain a single platform_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_platform_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Reviewed-by: Magnus Damm <magnus.damm@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
| * | | spi: irq: Remove IRQF_DISABLEDYong Zhang2011-10-245-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | OMAP: SPI: Fix the trying to free nonexistent resource errorShubhrajyoti D2011-10-241-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there is a request_mem_region(r->start, .. followed by r->start += pdata->regs_offset; And then in remove r = platform_get_resource(pdev, IORESOURCE_MEM, 0); release_mem_region(r->start, resource_size(r)); Here the offset addition is not taken care. Fix the code for the same. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | Merge commit 'v3.1' into spi/nextGrant Likely2011-10-243-28/+72
| |\| |
| * | | spi/spi-ep93xx: add module.h includeMika Westerberg2011-10-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to module.h cleanup it is not anymore included implicitly. Drivers who want to use it need to include it explicitly. Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | spi/tegra: fix compilation error in spi-tegra.cMarc Dietrich2011-10-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add #include <linux/module.h> to spi-tegra.c to fix a compilation error after the removal of module.h from device.h (in patch: "include: replace linux/module.h with "struct module" wherever possible"). Signed-off-by: Marc Dietrich <marvin24@gmx.de> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | spi: spi-dw: fix all sparse warningsH Hartley Sweeten2011-09-213-79/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dw_{read,write}[lw] macros produce sparse warnings everytime they are used. The "read" ones cause: warning: cast removes address space of expression warning: incorrect type in argument 1 (different address spaces) expected void const volatile [noderef] <asn:2>*addr got unsigned int *<noident> And the "write" ones: warning: cast removes address space of expression warning: incorrect type in argument 2 (different address spaces) expected void volatile [noderef] <asn:2>*addr got unsigned int *<noident> Fix this by removing struct dw_spi_reg and converting all the register offsets to #defines. Then convert the macros into inlined functions so that proper type checking can occur. While here, also fix the three sparse warnings in spi-dw-mid.c due to the return value of ioremap_nocache being stored in a u32 * not a void __iomem *. With these changes the spi-dw* files all build with no sparse warnings. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | spi/spi-pl022: Call pl022_dma_remove(pl022) only if enable_dma is trueViresh Kumar2011-09-211-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pl022_dma_remove() should be called only if enable_dma is true. There is no point calling it when pl022_dma_probe() is not called, which again depends on enable_dma. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | spi/spi-pl022: calculate_effective_freq() must set rate <= requested rateViresh Kumar2011-09-211-51/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were few issues with calculate_effective_freq() routine: - It was returning first rate found >= requested rate. Now, if system have spi's rate as 83 MHz, with possible prescaled rates as 83, 41.5, 20.75, 13.83 (as we can prescale with multiples of 2). If user has given rate to be programmed as 22 MHz, then driver programmes it to 41.5 MHz. This looks to be incorrect, as user might have given the upper limit of the device, and we are programming it above it. - Driver finds the first satisfying rate and programmes it, but with other values of scr & cpsdvsr, it is possible to get more closer rate. This patch fixes these two issues, with some reformatting inside the code. This also creates a inline routine to calculate prescaled rate based on spi's rate, cpsdvsr and scr. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | spi/spi-pl022: Don't allocate more sg than required.Viresh Kumar2011-09-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In routine configure_dma(), if transfer->len = PAGE_SIZE, then pages is one more than required. While leads to one more sg getting allocated. This is wrong. Correct this to allocate correct number of sg. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | spi/spi-pl022: Use GFP_ATOMIC for allocation from taskletViresh Kumar2011-09-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tasklets don't allow invocation to sleeping routines. In configure_dma() routine, sg_alloc_table() was called with GFP_KERNEL flag and so this causes crash when called from tasklet. Replace GFP_KERNEL with GFP_ATOMIC to get this fixed. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | spi/spi-pl022: Resolve formatting issuesViresh Kumar2011-09-201-22/+8
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There were few formatting related issues in code. This patch fixes them. Fixes include: - Remove extra blank lines - align code to 80 cols - combine several lines to one line - Replace multiple spaces with tabs - Remove spaces before labels Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | Merge branch 'clk' of ↵Linus Torvalds2011-10-271-0/+10
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7131/1: clkdev: Add Common Macro for clk_lookup clk: spi-pl022: convert to clk_prepare()/clk_unprepare() clk: timer-sp: convert to clk_prepare()/clk_unprepare() clk: sa1111: convert to clk_prepare()/clk_unprepare() clk: mmci: convert to clk_prepare()/clk_unprepare() clk: amba-pl011: convert to clk_prepare()/clk_unprepare() clk: amba-pl010: convert to clk_prepare()/clk_unprepare() clk: amba-clcd: convert to clk_prepare()/clk_unprepare() clk: amba bus: convert to clk_prepare()/clk_unprepare() clk: provide prepare/unprepare functions
| * | | clk: spi-pl022: convert to clk_prepare()/clk_unprepare()Russell King2011-09-271-0/+10
| | | | | | | | | | | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | | Merge branch 'amba' of ↵Linus Torvalds2011-10-271-34/+50
|\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'amba' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7079/1: spi: Fix builderror in spi-pl022.c PM: add runtime PM support to MMCI PM: add runtime PM support to core Primecell driver
| * | | ARM: 7079/1: spi: Fix builderror in spi-pl022.cPeter Hüwe2011-09-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a build error, introduced by commit (67fc8b9f, "PM: add runtime PM support to core Primecell driver") which unfortunately was a little bit incomplete and did contain a typo (11 instead of 22). I'm not sure how this patch could have been tested back then, if it doesn't even compile ;) The build failure was: drivers/spi/spi-pl022.c:2292: error: 'adev' undeclared (first use in this function) drivers/spi/spi-pl022.c:2344: error: 'pl022_suspend' undeclared here (not in a function) The build failure appears e.g. for the u8500 and realview defconfig. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
| * | | PM: add runtime PM support to core Primecell driverRussell King2011-09-221-32/+48
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add runtime PM support to the core Primecell driver, following the PCI model of how this is done. Rather than having every driver fiddle about with enabling runtime PM, that's dealt with in the core and instead, drivers just do a put() in their probe and a balancing get() in their remove function to activate runtime PM for the device. As we're dealing with enabling runtime PM in the core, fix up spi-pl022 as it must not enable and disable runtime PM itself anymore. Tested-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | | Merge branch 'gpio' of ↵Linus Torvalds2011-10-271-1/+1
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
| * | ARM: gpio: at91: convert drivers to use asm/gpio.h rather than mach/gpio.hRussell King2011-08-081-1/+1
| |/ | | | | | | Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* | spi-topcliff-pch: Fix overrun issueTomoya MORINAGA2011-10-041-5/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We found that adding load, Rx data sometimes drops.(with DMA transfer mode) The cause is that before starting Rx-DMA processing, Tx-DMA processing starts. This causes FIFO overrun occurs. This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor size like below. Current this patch Rx-descriptor 4Byte+12Byte*341 --> 12Byte*340-4Byte-12Byte Rx-threshold (Not modified) Tx-descriptor 4Byte+12Byte*341 --> 16Byte-12Byte*340 Rx-threshold 12Byte --> 2Byte Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | spi-topcliff-pch: Add recovery processing in case FIFO overrun error occursTomoya MORINAGA2011-10-041-7/+24
| | | | | | | | | | | | | | Add recovery processing in case FIFO overrun error occurs with DMA transfer mode. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | spi-topcliff-pch: Fix CPU read complete condition issueTomoya MORINAGA2011-10-041-8/+11
| | | | | | | | | | | | | | | | | | | | We found Rx data sometimes drops.(with non-DMA transfer mode) The cause is read complete condition is not true. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | spi-topcliff-pch: Fix SSN Control issueTomoya MORINAGA2011-10-041-7/+3
| | | | | | | | | | | | | | | | | | | | During processing 1 command/data series, SSN should keep LOW. However, currently, SSN becomes HIGH. This patch fixes the issue. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | spi-topcliff-pch: add tx-memory clear after complete transmittingTomoya MORINAGA2011-10-041-0/+5
| | | | | | | | | | | | | | | | | | | | Currently, in case of reading date from SPI flash, command is sent twice. The cause is that tx-memory clear processing is missing . This patch adds the tx-momory clear processing. Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | spi: Fix WARN when removing spi-fsl-spi moduleJeff Harris2011-09-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | If CPM mode is not used, the fsl_dummy_rx variable is never allocated. When the cleanup attempts to free it, the reference count is zero and a WARN is generated. The same CPM mode check used in the initialize is applied to the free as well. Tested on 2.6.33 with the previous spi_mpc8xxx driver. The renamed spi-fsl-spi driver looks to have the same problem. Signed-off-by: Jeff Harris <jeff_harris@kentrox.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | spi/imx: Fix spi-imx when the hardware SPI chipselects are usedFabio Estevam2011-09-151-1/+3
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 22a85e4cd51 (spi/imx: add device tree probe support) broke spi-imx usage when the SPI chipselect is the one internal to the controller. On a mx31pdk board the following error is seen: Registering mxc_nand as whole device ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x4c/0xf4() autorequest GPIO-0 Modules linked in: [<c0014410>] (unwind_backtrace+0x0/0xf4) from [<c0025754>] (warn_slowpath_common+0x4c/0x64) [<c0025754>] (warn_slowpath_common+0x4c/0x64) from [<c0025800>] (warn_slowpath_fmt+0x30/0x40) [<c0025800>] (warn_slowpath_fmt+0x30/0x40) from [<c0198688>] (gpio_ensure_requested+0x4c/0xf4) [<c0198688>] (gpio_ensure_requested+0x4c/0xf4) from [<c01988c8>] (gpio_direction_output+0xa0/0x138) [<c01988c8>] (gpio_direction_output+0xa0/0x138) from [<c01ed198>] (spi_imx_setup+0x38/0x4c) [<c01ed198>] (spi_imx_setup+0x38/0x4c) from [<c01eb5d0>] (spi_setup+0x38/0x50) [<c01eb5d0>] (spi_setup+0x38/0x50) from [<c01eb85c>] (spi_add_device+0x94/0x124) [<c01eb85c>] (spi_add_device+0x94/0x124) from [<c01eb960>] (spi_new_device+0x74/0xac) [<c01eb960>] (spi_new_device+0x74/0xac) from [<c01eb9b8>] (spi_match_master_to_boardinfo+0x20/0x40) [<c01eb9b8>] (spi_match_master_to_boardinfo+0x20/0x40) from [<c01eba88>] (spi_register_master+0xb0/0x104) [<c01eba88>] (spi_register_master+0xb0/0x104) from [<c01ec0b4>] (spi_bitbang_start+0x104/0x17c) [<c01ec0b4>] (spi_bitbang_start+0x104/0x17c) from [<c02c2c4c>] (spi_imx_probe+0x2fc/0x404) [<c02c2c4c>] (spi_imx_probe+0x2fc/0x404) from [<c01c2498>] (platform_drv_probe+0x18/0x1c) [<c01c2498>] (platform_drv_probe+0x18/0x1c) from [<c01c1058>] (driver_probe_device+0x78/0x174) [<c01c1058>] (driver_probe_device+0x78/0x174) from [<c01c11e0>] (__driver_attach+0x8c/0x90) [<c01c11e0>] (__driver_attach+0x8c/0x90) from [<c01c0860>] (bus_for_each_dev+0x60/0x8c) [<c01c0860>] (bus_for_each_dev+0x60/0x8c) from [<c01c0088>] (bus_add_driver+0xa0/0x288) [<c01c0088>] (bus_add_driver+0xa0/0x288) from [<c01c179c>] (driver_register+0x78/0x18c) [<c01c179c>] (driver_register+0x78/0x18c) from [<c0008490>] (do_one_initcall+0x34/0x178) [<c0008490>] (do_one_initcall+0x34/0x178) from [<c03a5204>] (kernel_init+0x74/0x118) [<c03a5204>] (kernel_init+0x74/0x118) from [<c000f65c>] (kernel_thread_exit+0x0/0x8) ---[ end trace 759f924b30fd5a44 ]--- Fix this issue by using the original chip select logic and make spi-imx to work again. Tested on a mx31pdk that uses the hardware SPI chipselect pins and also on a mx27pdk that uses GPIO as SPI chipselect. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* spi/pl022: remove function cannot exitLinus Walleij2011-08-021-8/+3
| | | | | | | | | | | The remove function in the PL022 driver cannot abort the remove function any way, so restructure the code so as not to make that assumption. Remove will now proceed no matter whether it can stop the transfer queue or not. Reported-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* Merge branch 'spi/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2011-07-2257-1299/+1787
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'spi/next' of git://git.secretlab.ca/git/linux-2.6: (34 commits) spi/imx: add device tree probe support spi/imx: copy gpio number passed by platform data into driver private data spi/imx: use soc name in spi device type naming scheme spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4 spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro spi/imx: do not make copy of spi_imx_devtype_data spi/dw: Add spi number into spi irq desc spi/tegra: Use engineering names in DT compatible property spi/fsl_spi: fix CPM spi driver mach-s3c2410: remove unused spi-gpio.h file spi: remove obsolete spi-s3c24xx-gpio driver mach-gta2: remove unused spi-gpio.h include mach-qt2410: convert to spi_gpio mach-jive: convert to spi_gpio spi/pxa2xx: Remove unavailable ssp_type from documentation spi/bfin_spi: uninline fat queue funcs spi/bfin_spi: constify pin array spi/bfin_spi: use structs for accessing hardware regs spi/topcliff-pch: Support new device ML7223 IOH ... Fix up trivial conflict in arch/arm/mach-ep93xx/Makefile
| * spi/imx: add device tree probe supportShawn Guo2011-07-141-7/+31
| | | | | | | | | | | | | | | | It adds device tree probe support for spi-imx driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * spi/imx: copy gpio number passed by platform data into driver private dataShawn Guo2011-07-141-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | It copies gpio number passed via platform data embedded pointer into driver private data, so that we do not need to refer to this embedded pointer passed by platform data after probe function exits. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * spi/imx: use soc name in spi device type naming schemeShawn Guo2011-07-142-111/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Software defined version number is not stable enough to be used in device type naming scheme. The patch changes it to use implicit soc name for spi device type definition. In this way, we can easily align the naming scheme with device tree binding, which comes later. It removes fifosize from spi_imx_data and adds devtype there, so that fifosize can be set in an inline function according to devtype. Also, cpu_is_mx can be replaced by inline functions checking devtype. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4Shawn Guo2011-07-142-56/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only difference between SPI_IMX_VER_0_7 and SPI_IMX_VER_0_4 is .config function. The patch uses cpu_is_mx35 (to be removed) as the temporary solution to consolidate functions spi_imx0_4_config and spi_imx0_7_config into mx31_config. As a result, type SPI_IMX_VER_0_7 can be merged into SPI_IMX_VER_0_4. It also renames function spi_imx0_4_reset to mx31_reset to keep consistency with other function naming. A couple of redundant macros, MX3_CSPISTAT and MX3_CSPISTAT_RR, together with the useless type SPI_IMX_VER_0_5 also get cleaned up. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macroShawn Guo2011-07-141-53/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It's confusing to use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro, as it easily make people think of imx2 and imx3. It's better to use specific soc name just like what other SPI_IMX_VER do. For SPI_IMX_VER_2_3 case, it will be mx51. To distinguish it from CSPI on mx51, mx51_ecspi might be a good choice. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 16:27:16 +0100