summaryrefslogtreecommitdiffstats
path: root/drivers/ssb (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ssb: Fix error routine when fallback SPROM failsLarry Finger2016-11-171-0/+1
| | | | | | | | | | When there is a CRC error in the SPROM read from the device, the code attempts to handle a fallback SPROM. When this also fails, the driver returns zero rather than an error code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* SSB: Change bare unsigned to unsigned int to suit coding styleHugh Sipière2016-07-061-11/+11
| | | | | | | | | | | | These lines just have unsigned gpio rather than unsigned int gpio. I changed it to suit the coding style. Michael Buesch told me to send this to the MIPS tree. Signed-off-by: Hugh Sipière <hgsipiere@gmail.com> Acked-by: Michael Buesch <m@bues.ch> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13460/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* ssb: gpio_driver: use gpiochip data pointerLinus Walleij2016-04-261-19/+14
| | | | | | | | | | This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Michael Buesch <m@bues.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* ssb: host_soc depends on spromArnd Bergmann2016-02-261-0/+1
| | | | | | | | | | | | | | | | Drivers that use the SSB sprom functionality typically 'select SSB_SPROM' from Kconfig, but CONFIG_SSB_HOST_SOC misses this, which results in a build failure unless at least one of the other drivers that selects it is enabled: drivers/built-in.o: In function `ssb_host_soc_get_invariants': (.text+0x459494): undefined reference to `ssb_fill_sprom_with_fallback' This adds the same select statement that is used elsewhere. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 541c9a84cd85 ("ssb: pick SoC invariants code from MIPS BCM47xx arch") Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: mark ssb_bus_register as __maybe_unusedArnd Bergmann2016-01-191-3/+4
| | | | | | | | | | | | | | | | | | | The SoC variant of the ssb code is now optional like the other ones, which means we can build the framwork without any front-end, but that results in a warning: drivers/ssb/main.c:616:12: warning: 'ssb_bus_register' defined but not used [-Wunused-function] This annotates the ssb_bus_register function as __maybe_unused to shut up the warning. A configuration like this will not work on any hardware of course, but we still want this to silently build without warnings if the configuration is allowed in the first place. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 845da6e58e19 ("ssb: add Kconfig entry for compiling SoC related code") Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: pick SoC invariants code from MIPS BCM47xx archRafał Miłecki2015-12-164-4/+43
| | | | | | | | | | | | | There is code in ssb fetching "invariants" that is basically a set of board specific data. Every host requires its own implementation of reading function. In ssb we have support for PCI, PCMCIA & SDIO. For some (historical?) reason code reading "invariants" for SoC was placed in arch code and provided by a callback. This is not needed nowadays, so lets move that into ssb. This way we keep all "invariants" functions in a single module making code cleaner. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: add Kconfig entry for compiling SoC related codeRafał Miłecki2015-10-284-1/+14
| | | | | | | This allows saving a little of space when not using ssb on Broadcom SoC. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: move functions specific to SoC hosted bus to separated fileRafał Miłecki2015-10-284-161/+180
| | | | | | | | This cleans main.c a bit and will allow us to compile SoC related code conditionally in the future. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: pick PCMCIA host code support from b43 driverRafał Miłecki2015-10-284-2/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | ssb bus can be found on various "host" devices like PCI/PCMCIA/SDIO. Every ssb bus contains cores AKA devices. The main idea is to have ssb driver scan/initialize bus and register ready-to-use cores. This way ssb drivers can operate on a single core mostly ignoring underlaying details. For some reason PCMCIA support was split between ssb and b43. We got PCMCIA host device probing in b43, then bus scanning in ssb and then wireless core probing back in b43. The truth is it's very unlikely we will ever see PCMCIA ssb device with no 802.11 core but I still don't see any advantage of the current architecture. With proposed change we get the same functionality with a simpler architecture, less Kconfig symbols, one killed EXPORT and hopefully cleaner b43. Since b43 supports both: ssb & bcma I prefer to keep ssb specific code in ssb driver. This mostly moves code from b43's pcmcia.c to bridge_pcmcia_80211.c. We already use similar solution with b43_pci_bridge.c. I didn't use "b43" in name of this new file as in theory any driver can operate on wireless core. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: make ssb_pcmcia_switch_core staticRafał Miłecki2015-09-292-9/+1
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: drop declaration of non existing ssb_sdio_hardware_setupRafał Miłecki2015-09-291-5/+0
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: make ssb_sdio_switch_core staticRafał Miłecki2015-09-292-7/+1
| | | | | | | It's used locally only. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* ssb: unexport ssb_bus_pcibus_registerRafał Miłecki2015-09-291-1/+0
| | | | | | | | It isn't used anywhere out of ssb code and we don't (plan to) build pcihost_wrapper.c as a separated module. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* SSB: Fix handling of ssb_pmu_get_alp_clock()Hauke Mehrtens2015-06-091-3/+3
| | | | | | | | | | | | | | | Dan Carpenter reported missing brackets which resulted in reading a wrong crystalfreq value. I also noticed that the result of this function is ignored. Reported-By: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Michael Buesch <m@bues.ch> Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10536/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* ssb: extend fix for PCI related silent reboots to all chipsetsRafał Miłecki2015-05-201-3/+4
| | | | | | | | | Recent fix for BCM4704 reboots has to be extended as the same problem affects Linksys WRT350N v1 (BCM4705). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reported-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-04-173-2/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for Linux 4.1. Most noteworthy: - Add more Octeon-optimized crypto functions - Octeon crypto preemption and locking fixes - Little endian support for Octeon - Use correct CSR to soft reset Octeons - Support LEDs on the Octeon-based DSR-1000N - Fix PCI interrupt mapping for the Octeon-based DSR-1000N - Mark prom_free_prom_memory() as __init for a number of systems - Support for Imagination's Pistachio SOC. This includes arch and CLK bits. I'd like to merge pinctrl bits later - Improve parallelism of csum_partial for certain pipelines - Organize DTB files in subdirs like other architectures - Implement read_sched_clock for all MIPS platforms other than Octeon - Massive series of 38 fixes and cleanups for the FPU emulator / kernel - Further FPU remulator work to support new features. This sits on a separate branch which also has been pulled into the 4.1 KVM branch - Clean up and fixes for the SEAD3 eval board; remove unused file - Various updates for Netlogic platforms - A number of small updates for Loongson 3 platforms - Increase the memory limit for ATH79 platforms to 256MB - A fair number of fixes and updates for BCM47xx platforms - Finish the implementation of XPA support - MIPS FDC support. No, not floppy controller but Fast Debug Channel :) - Detect the R16000 used in SGI legacy platforms - Fix Kconfig dependencies for the SSB bus support" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (265 commits) MIPS: Makefile: Fix MIPS ASE detection code MIPS: asm: elf: Set O32 default FPU flags MIPS: BCM47XX: Fix detecting Microsoft MN-700 & Asus WL500G MIPS: Kconfig: Disable SMP/CPS for 64-bit MIPS: Hibernate: flush TLB entries earlier MIPS: smp-cps: cpu_set FPU mask if FPU present MIPS: lose_fpu(): Disable FPU when MSA enabled MIPS: ralink: add missing symbol for RALINK_ILL_ACC MIPS: ralink: Fix bad config symbol in PCI makefile. SSB: fix Kconfig dependencies MIPS: Malta: Detect and fix bad memsize values Revert "MIPS: Avoid pipeline stalls on some MIPS32R2 cores." MIPS: Octeon: Delete override of cpu_has_mips_r2_exec_hazard. MIPS: Fix cpu_has_mips_r2_exec_hazard. MIPS: kernel: entry.S: Set correct ISA level for mips_ihb MIPS: asm: spinlock: Fix addiu instruction for R10000_LLSC_WAR case MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes MIPS: Kconfig: Fix typo for the r2-to-r6 emulator kernel parameter MIPS: unaligned: Fix regular load/store instruction emulation for EVA MIPS: unaligned: Surround load/store macros in do {} while statements ...
| * Merge branch '4.0-fixes' into mips-for-linux-nextRalf Baechle2015-04-131-0/+1
| |\
| | * SSB: fix Kconfig dependenciesAdrien Schildknecht2015-04-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 21400f252a97 ("MIPS: BCM47XX: Make ssb init NVRAM instead of bcm47xx polling it") introduces a dependency to SSB_SFLASH but did not add it to the Kconfig. drivers/ssb/driver_mipscore.c:216:36: error: 'struct ssb_mipscore' has no member named 'sflash' struct ssb_sflash *sflash = &mcore->sflash; ^ drivers/ssb/driver_mipscore.c:249:12: error: dereferencing pointer to incomplete type if (sflash->present) { ^ Signed-off-by: Adrien Schildknecht <adrien+dev@schischi.me> Cc: m@bues.ch Cc: zajec5@gmail.com Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9598/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| * | MIPS: BCM47xx: Move NVRAM header to the include/linux/.Rafał Miłecki2015-04-012-2/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are two reasons for having this header in the common place: 1) Simplifying drivers that read NVRAM entries. We will be able to safely call bcm47xx_nvram_* functions without #ifdef-s. 2) Getting NVRAM driver out of MIPS arch code. This is needed to support BCM5301X arch which also requires this NVRAM driver. Patch for that will follow once we get is reviewed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Paul Walmsley <paul@pwsan.com> Cc: linux-soc@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/8619/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | ssb: add delay after PCI reset to fix SoC rebootsRafał Miłecki2015-04-071-0/+9
| | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* | ssb: Silence warning for unknown backplane revisionLarry Finger2015-03-031-0/+2
|/ | | | | | | | | | When using a BCM4318 in a PCMCIA format, I get a startup message that the device uses backplane revision 0xF000000. Next a WARNING is logged. Despite the message, the device works fine, This patch silences the warning. Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* treewide: Remove unnecessary SSB_DEVTABLE_END macroJoe Perches2015-02-111-1/+1
| | | | | | | | | Use the normal {} instead of a macro to terminate an array. Remove the macro too. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ssb: Fix Sparse error in mainPramod Gurav2015-01-291-19/+0
| | | | | | | | | | This change fixes below sparse error: drivers/ssb/main.c:94:16: warning: symbol 'ssb_sdio_func_to_bus' was not declared. Should it be static? Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2014-12-121-1/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: <asm/types.h> fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...
| * MIPS: BCM47XX: Make ssb init NVRAM instead of bcm47xx polling itRafał Miłecki2014-11-241-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | This makes NVRAM code less bcm47xx/ssb specific allowing it to become a standalone driver in the future. A similar patch for bcma will follow when it's ready. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7612/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | SSB / B44: fix WOL for BCM4401Andrey Skvortsov2014-12-041-11/+22
|/ | | | | | | | | | | | | | | | | | | | | | Wake On Lan was not working on laptop DELL Vostro 1500. If WOL was turned on, BCM4401 was powered up in suspend mode. LEDs blinked. But the laptop could not be woken up with the Magic Packet. The reason for that was that PCIE was not enabled as a system wakeup source and therefore the host PCI bridge was not powered up in suspend mode. PCIE was not enabled in suspend by PM because no child devices were registered as wakeup source during suspend process. On laptop BCM4401 is connected through the SSB bus, that is connected to the PCI-Express bus. SSB and B44 did not use standard PM wakeup functions and did not forward wakeup settings to their parents. To fix that B44 driver enables PM wakeup and registers new wakeup source using device_set_wakeup_enable(). Wakeup is automatically reported to the parent SSB bus via power.wakeup_path. SSB bus enables wakeup for the parent PCI bridge, if there is any child devices with enabled wakeup functionality. All other steps are done by PM core code. Signed-off-by: Andrey Skvortsov <Andrej.Skvortzov@gmail.com> Signed-off-by: Michael Buesch <m@bues.ch> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge tag 'gpio-v3.18-1' of ↵Linus Torvalds2014-10-091-1/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO changes from Linus Walleij: "This is the bulk of GPIO changes for the v3.18 development cycle: - Increase the default ARCH_NR_GPIO from 256 to 512. This was done to avoid having a custom <asm/gpio.h> header for the x86 architecture - GPIO is custom and complicated enough as it is already! We want to move to a radix to store the descriptors going forward, and finally get rid of this fixed array size altogether. - Endgame patching of the gpio_remove() semantics initiated by Abdoulaye Berthe. It is not accepted by the system that the removal of a GPIO chip fails during eg reboot or shutdown, and therefore the return value has now painfully been refactored away. For special cases like GPIO expanders on a hot-pluggable bus like USB, we may later add some gpiochip_try_remove() call, but for the cases we have now, return values are moot. - Some incremental refactoring of the gpiolib core and ACPI GPIO library for more descriptor usage. - Refactor the chained IRQ handler set-up method to handle also threaded, nested interrupts and set up the parent IRQ correctly. Switch STMPE and TC3589x drivers to use this registration method. - Add a .irq_not_threaded flag to the struct gpio_chip, so that also GPIO expanders that block but are still not using threaded IRQ handlers. - New drivers for the ARM64 X-Gene SoC GPIO controller. - The syscon GPIO driver has been improved to handle the "DSP GPIO" found on the TI Keystone 2 SoC:s. - ADNP driver switched to use gpiolib irqchip helpers. - Refactor the DWAPB driver to support being instantiated from and MFD cell (platform device). - Incremental feature improvement in the Zynq, MCP23S08, DWAPB, OMAP, Xilinx and Crystalcove drivers. - Various minor fixes" * tag 'gpio-v3.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (52 commits) gpio: pch: Build context save/restore only for PM pinctrl: abx500: get rid of unused variable gpio: ks8695: fix 'else should follow close brace '}'' gpio: stmpe: add verbose debug code gpio: stmpe: fix up interrupt enable logic gpio: staticize xway_stp_init() gpio: handle also nested irqchips in the chained handler set-up gpio: set parent irq on chained handlers gpiolib: irqchip: use irq_find_mapping while removing irqchip gpio: crystalcove: support virtual GPIO pinctrl: bcm281xx: make Kconfig dependency more strict gpio: kona: enable only on BCM_MOBILE or for compile testing gpio, bcm-kona, LLVMLinux: Remove use of __initconst gpio: Fix ngpio in gpio-xilinx driver gpio: dwapb: fix pointer to integer cast gpio: xgene: Remove unneeded #ifdef CONFIG_OF guard gpio: xgene: Remove unneeded forward declation for struct xgene_gpio gpio: xgene: Fix missing spin_lock_init() gpio: ks8695: fix switch case indentation gpiolib: add irq_not_threaded flag to gpio_chip ...
| * driver:gpio remove all usage of gpio_remove retval in driverabdoulaye berthe2014-09-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | this remove all reference to gpio_remove retval in all driver except pinctrl and gpio. the same thing is done for gpio and pinctrl in two different patches. Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com> Acked-by: Michael Büsch <m@bues.ch> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | ssb: add PCI ID 0x4351Álvaro Fernández Rojas2014-08-251-0/+1
|/ | | | | | | 14e4:4351 is found on a Broadcom BCM43222. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ssb: extract power info from SPROM revs 4 and 5Rafał Miłecki2014-07-181-0/+45
| | | | | | | This is needed to properly handle early 802.11n devices like BCM4321. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ssb: extract antenna gains from SPROMs revs 4+ properlyRafał Miłecki2014-07-151-16/+32
| | | | | | | They are encoded the same way as in older SPROMs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ssb: make code for antenna gain extraction more genericRafał Miłecki2014-07-151-9/+11
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2014-01-313-21/+298
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
| * ssb: gpio: add own IRQ domainRafał Miłecki2014-01-243-21/+298
| | | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Michael Buesch <m@bues.ch> Signed-off-by: John Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6342/
* | ssb: fix sparse warnings in driver_chipcommon_sflash.cHauke Mehrtens2014-01-031-3/+3
|/ | | | | | | | | | CHECK drivers/ssb/driver_chipcommon_sflash.c drivers/ssb/driver_chipcommon_sflash.c:40:11: warning: Using plain integer as NULL pointer drivers/ssb/driver_chipcommon_sflash.c:58:11: warning: Using plain integer as NULL pointer drivers/ssb/driver_chipcommon_sflash.c:69:11: warning: Using plain integer as NULL pointer Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ssb: convert bus code to use dev_groupsGreg Kroah-Hartman2013-10-171-11/+14
| | | | | | | | | | The dev_attrs field of struct bus_type is going away soon, dev_groups should be used instead. This converts the ssb bus code to use the correct field. Cc: Michael Buesch <m@bues.ch> Cc: <netdev@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ssb: drop BROKEN from SSB_SFLASHRafał Miłecki2013-08-012-6/+4
| | | | | | | | | With recent patches ssb can fetch info about serial flash and register it as a platform device. No more reasons to mark it BROKEN. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2013-07-131-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: "MIPS updates: - All the things that didn't make 3.10. - Removes the Windriver PPMC platform. Nobody will miss it. - Remove a workaround from kernel/irq/irqdomain.c which was there exclusivly for MIPS. Patch by Grant Likely. - More small improvments for the SEAD 3 platform - Improvments on the BMIPS / SMP support for the BCM63xx series. - Various cleanups of dead leftovers. - Platform support for the Cavium Octeon-based EdgeRouter Lite. Two large KVM patchsets didn't make it for this pull request because their respective authors are vacationing" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (124 commits) MIPS: Kconfig: Add missing MODULES dependency to VPE_LOADER MIPS: BCM63xx: CLK: Add dummy clk_{set,round}_rate() functions MIPS: SEAD3: Disable L2 cache on SEAD-3. MIPS: BCM63xx: Enable second core SMP on BCM6328 if available MIPS: BCM63xx: Add SMP support to prom.c MIPS: define write{b,w,l,q}_relaxed MIPS: Expose missing pci_io{map,unmap} declarations MIPS: Malta: Update GCMP detection. Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET" MIPS: APSP: Remove <asm/kspd.h> SSB: Kconfig: Amend SSB_EMBEDDED dependencies MIPS: microMIPS: Fix improper definition of ISA exception bit. MIPS: Don't try to decode microMIPS branch instructions where they cannot exist. MIPS: Declare emulate_load_store_microMIPS as a static function. MIPS: Fix typos and cleanup comment MIPS: Cleanup indentation and whitespace MIPS: BMIPS: support booting from physical CPU other than 0 MIPS: Only set cpu_has_mmips if SYS_SUPPORTS_MICROMIPS MIPS: GIC: Fix gic_set_affinity infinite loop MIPS: Don't save/restore OCTEON wide multiplier state on syscalls. ...
| * SSB: Kconfig: Amend SSB_EMBEDDED dependenciesMarkos Chandras2013-07-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SSB_EMBEDDED needs functions from driver_pcicore which are only available if SSD_DRIVER_HOSTMODE is selected so make it depend on that symbol. Fixes the following linking problem: drivers/ssb/embedded.c:202: undefined reference to `ssb_pcicore_plat_dev_init' drivers/built-in.o: In function `ssb_pcibios_map_irq': drivers/ssb/embedded.c:247: undefined reference to `ssb_pcicore_pcibios_map_irq' Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: sibyte-users@bitmover.com Cc: netdev@vger.kernel.org Cc: Michael Buesch <m@bues.ch> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5484/ Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* | ssb/trivial: replace numeric with standard PM state macrosYijing Wang2013-06-291-1/+1
| | | | | | | | | | | | | | | | | | Use standard PM state macros PCI_Dx instead of numeric 0/1/2.. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'master' of ↵John W. Linville2013-06-213-4/+42
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: net/wireless/nl80211.c
| * | ssb: register serial flash as platform deviceRafał Miłecki2013-06-183-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | This allows writing MTD driver working as a platform driver. In platform_data it will receive struct ssb_sflash, which contains all important data about flash (window, size). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ssb: add struct for serial flashRafał Miłecki2013-06-171-0/+7
| | | | | | | | | | | | | | | | | | | | | This data allow writing for example MTD driver. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ssb: use const for serial flash hardware tableRafał Miłecki2013-06-171-4/+4
| |/ | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* / ssb: sprom: replace strict_strtoul() with kstrtoul()Jingoo Han2013-06-031-1/+1
|/ | | | | | | | | The usage of strict_strtoul() is not preferred, because strict_strtoul() is obsolete. Thus, kstrtoul() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'for-linus-20130509' of git://git.infradead.org/linux-mtdLinus Torvalds2013-05-091-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MTD update from David Woodhouse: - Lots of cleanups from Artem, including deletion of some obsolete drivers - Support partitions larger than 4GiB in device tree - Support for new SPI chips * tag 'for-linus-20130509' of git://git.infradead.org/linux-mtd: (83 commits) mtd: omap2: Use module_platform_driver() mtd: bf5xx_nand: Use module_platform_driver() mtd: denali_dt: Remove redundant use of of_match_ptr mtd: denali_dt: Change return value to fix smatch warning mtd: denali_dt: Use module_platform_driver() mtd: denali_dt: Fix incorrect error check mtd: nand: subpage write support for hardware based ECC schemes mtd: omap2: use msecs_to_jiffies() mtd: nand_ids: use size macros mtd: nand_ids: improve LEGACY_ID_NAND macro a bit mtd: add 4 Toshiba nand chips for the full-id case mtd: add the support to parse out the full-id nand type mtd: add new fields to nand_flash_dev{} mtd: sh_flctl: Use of_match_ptr() macro mtd: gpio: Use of_match_ptr() macro mtd: gpio: Use devm_kzalloc() mtd: davinci_nand: Use of_match_ptr() mtd: dataflash: Use of_match_ptr() macro mtd: remove h720x flash support mtd: onenand: remove OneNAND simulator ...
| * ssb: driver_mipscore: add a const qualifierArtem Bityutskiy2013-04-051-1/+1
| | | | | | | | | | | | | | | | Be a bit stricter and add few more 'const' qualifiers. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Michael Buesch <m@bues.ch> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
* | ssb: implement ssb spuravoid for chipid BCM43222Hauke Mehrtens2013-04-261-2/+17
| | | | | | | | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | Merge branch 'master' of ↵John W. Linville2013-04-231-0/+29
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
| * | ssb: implement spurious tone avoidanceRafał Miłecki2013-04-101-0/+29
| |/ | | | | | | | | | | | | | | | | | | | | | | | | And make use of it in b43. This fixes a regression introduced with 49d55cef5b1925a5c1efb6aaddaa40fc7c693335 b43: N-PHY: implement spurious tone avoidance This commit made BCM4322 use only MCS 0 on channel 13, which of course resulted in performance drop (down to 0.7Mb/s). Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 23:44:37 +0100