summaryrefslogtreecommitdiffstats
path: root/drivers/uio (follow)
Commit message (Collapse)AuthorAgeFilesLines
* uio: Add module.h to implicit drivers/uio usersPaul Gortmaker2011-11-012-0/+2
| | | | | | | We are cleaning up the omnipresent module.h stuff, so people who really use it need to call it out explicitly. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* uio: Support physical addresses >32 bits on 32-bit systemsKai Jiang2011-10-181-4/+3
| | | | | | | | | | | | | | | | | | | | | | | To support >32-bit physical addresses for UIO_MEM_PHYS type we need to extend the width of 'addr' in struct uio_mem. Numerous platforms like embedded PPC, ARM, and X86 have support for systems with larger physical address than logical. Since 'addr' may contain a physical, logical, or virtual address the easiest solution is to just change the type to 'phys_addr_t' which should always be greater than or equal to the sizeof(void *) such that it can properly hold any of the address types. For physical address we can support up to a 44-bit physical address on a typical 32-bit system as we utilize remap_pfn_range() for the mapping of the memory region and pfn's are represnted by shifting the address by the page size (typically 4k). Signed-off-by: Kai Jiang <Kai.Jiang@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers:uio:fix section mismatch in uio_pdrv_genirq.cWanlong Gao2011-08-231-1/+1
| | | | | | | | | | | | | | | | | | Remove the __devinitconst to fix the section mismatch. WARNING: drivers/uio/built-in.o(.data+0x2e8): Section mismatch in reference from the variable uio_pdrv_genirq to the variable .devinit.rodata:uio_of_genirq_match The variable uio_pdrv_genirq references the variable __devinitconst uio_of_genirq_match If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers:uio:change the goto label to consistent with othersWanlong Gao2011-08-231-4/+3
| | | | | | | | Remove one *goto* label in uio.c. Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Signed-off-by: "Hans J. Koch" <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* uio: uio_pci_generic: Remove useless spin_lockHans J. Koch2011-08-231-5/+0
| | | | | | | | | | | | | | | | | The spin_lock in uio_pci_generic.c is only used in the interrupt handler, which cannot be executed twice at the same time. That makes the lock rather pointless. This patch removes it. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Chris Wright <chrisw@redhat.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Anthony Foiani <anthony.foiani@gmail.com> Reported-by: Anthony Foiani <anthony.foiani@gmail.com> Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'driver-core-next' of ↵Linus Torvalds2011-07-261-0/+43
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6 * 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: updated Documentation/ja_JP/SubmittingPatches debugfs: add documentation for debugfs_create_x64 uio: uio_pdrv_genirq: Add OF support firmware: gsmi: remove sysfs entries when unload the module Documentation/zh_CN: Fix messy code file email-clients.txt driver core: add more help description for "path to uevent helper" driver-core: modify FIRMWARE_IN_KERNEL help message driver-core: Kconfig grammar corrections in firmware configuration DOCUMENTATION: Replace create_device() with device_create(). DOCUMENTATION: Update overview.txt in Doc/driver-model. pti: pti_tty_install documentation mispelling.
| * uio: uio_pdrv_genirq: Add OF supportHans J. Koch2011-07-091-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding OF binding to genirq. Version string is setup to the "devicetree". Compatible string is not setup for now but you can add your custom compatible string to uio_of_genirq_match structure. For example with "vendor,device" compatible string: static const struct of_device_id __devinitconst uio_of_genirq_match[] = { { .compatible = "vendor,device", }, { /* empty for now */ }, }; Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> CC: Hans J. Koch <hjk@hansjkoch.de> CC: Arnd Bergmann <arnd@arndb.de> CC: John Williams <john.williams@petalogix.com> CC: Grant Likely <grant.likely@secretlab.ca> CC: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | treewide: Convert uses of struct resource to resource_size(ptr)Joe Perches2011-06-102-2/+2
|/ | | | | | | | | | | | | | | | | | | | Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* uio: clean uioinfo when uninstall uio driverJie Zhou2011-04-201-0/+4
| | | | | | | | | | The uioinfo should be cleaned up when uninstall, otherwise re-install failure of uio_pdrv_genirq.ko will happen. Signed-off-by: Jie Zhou <b30303@freescale.com> Signed-off-by: Aisheng Dong <b29396@freescale.com> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* uio: fix allocating minor id for uio deviceHillf Danton2011-04-201-1/+7
| | | | | | | | | | The number of uio devices that could be used should be less than UIO_MAX_DEVICES by design, and this work guards any cases in which id more than UIO_MAX_DEVICES is utilized. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* uio: fix finding mm index for vmaHillf Danton2011-04-201-5/+3
| | | | | | | | | | When finding mm index for vma it looks more flexible that the mm could be sparse, and both the size of mm and the pgoff of vma could give correct selection. Signed-off-by: Hillf Danton <dhillf@gmail.com> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* uio_netx: Add support for netPLC cardsDaniel Trautmann2011-04-201-0/+19
| | | | | | | | | | | This patch adds support for Hilscher / IBHsoftec netPLC cards to uio_netx userspace IO driver. Changes from v1 -> v2: Fixed whitespace errors reported by scripts/checkpatch.pl which were caused by email client. Signed-off-by: Daniel Trautmann <dtrautmann@ibhsoftec-sps.de> Signed-off-by: "Hans J. Koch" <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix common misspellingsLucas De Marchi2011-03-311-1/+1
| | | | | | Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
* UIO: add PRUSS UIO driver supportPratheesh Gangadhar2011-03-073-0/+265
| | | | | | | | | | | | | | | | | | | | This patch implements PRUSS (Programmable Real-time Unit Sub System) UIO driver which exports SOC resources associated with PRUSS like I/O, memories and IRQs to user space. PRUSS is dual 32-bit RISC processors which is efficient in performing embedded tasks that require manipulation of packed memory mapped data structures and handling system events that have tight real time constraints. This driver is currently supported on Texas Instruments DA850, AM18xx and OMAP-L138 devices. For example, PRUSS runs firmware for real-time critical industrial communication data link layer and communicates with application stack running in user space via shared memory and IRQs. Signed-off-by: Pratheesh Gangadhar <pratheesh@ti.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* uio: Change mail address of Hans J. KochHans J. Koch2010-11-113-3/+3
| | | | | | | | My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'for-next' of ↵Linus Torvalds2010-10-241-3/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) Update broken web addresses in arch directory. Update broken web addresses in the kernel. Revert "drivers/usb: Remove unnecessary return's from void functions" for musb gadget Revert "Fix typo: configuation => configuration" partially ida: document IDA_BITMAP_LONGS calculation ext2: fix a typo on comment in ext2/inode.c drivers/scsi: Remove unnecessary casts of private_data drivers/s390: Remove unnecessary casts of private_data net/sunrpc/rpc_pipe.c: Remove unnecessary casts of private_data drivers/infiniband: Remove unnecessary casts of private_data drivers/gpu/drm: Remove unnecessary casts of private_data kernel/pm_qos_params.c: Remove unnecessary casts of private_data fs/ecryptfs: Remove unnecessary casts of private_data fs/seq_file.c: Remove unnecessary casts of private_data arm: uengine.c: remove C99 comments arm: scoop.c: remove C99 comments Fix typo configue => configure in comments Fix typo: configuation => configuration Fix typo interrest[ing|ed] => interest[ing|ed] Fix various typos of valid in comments ... Fix up trivial conflicts in: drivers/char/ipmi/ipmi_si_intf.c drivers/usb/gadget/rndis.c net/irda/irnet/irnet_ppp.c
| * Update broken web addresses in the kernel.Justin P. Mattock2010-10-181-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch below updates broken web addresses in the kernel Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Dimitry Torokhov <dmitry.torokhov@gmail.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Acked-by: Ben Pfaff <blp@cs.stanford.edu> Acked-by: Hans J. Koch <hjk@linutronix.de> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds2010-10-232-100/+76
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (31 commits) driver core: Display error codes when class suspend fails Driver core: Add section count to memory_block struct Driver core: Add mutex for adding/removing memory blocks Driver core: Move find_memory_block routine hpilo: Despecificate driver from iLO generation driver core: Convert link_mem_sections to use find_memory_block_hinted. driver core: Introduce find_memory_block_hinted which utilizes kset_find_obj_hinted. kobject: Introduce kset_find_obj_hinted. driver core: fix build for CONFIG_BLOCK not enabled driver-core: base: change to new flag variable sysfs: only access bin file vm_ops with the active lock sysfs: Fail bin file mmap if vma close is implemented. FW_LOADER: fix kconfig dependency warning on HOTPLUG uio: Statically allocate uio_class and use class .dev_attrs. uio: Support 2^MINOR_BITS minors uio: Cleanup irq handling. uio: Don't clear driver data uio: Fix lack of locking in init_uio_class SYSFS: Allow boot time switching between deprecated and modern sysfs layout driver core: remove CONFIG_SYSFS_DEPRECATED_V2 but keep it for block devices ...
| * | uio: Statically allocate uio_class and use class .dev_attrs.Eric W. Biederman2010-10-221-35/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of adding uio class attributes manually after the uio device has been created and we have sent a uevent to userspace, use the class attribute mechanism. This removes races and makes the code simpler. At the same time don't bother to dynamically allocate a struct class for uio, just declare one statically. Less code is needed and it is easier to set the class parameters.tune the class Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | uio: Support 2^MINOR_BITS minorsEric W. Biederman2010-10-221-6/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | register_chrdev limits uio devices to 256 minor numbers which causes problems on one system I have with 384+ uio devices. So instead set UIO_MAX_DEVICES to the maximum number of minors and use alloc_chrdev_region to reserve the uio minors. The final result is that the code works the same but the uio driver now supports any minor the idr allocator comes up with. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | uio: Cleanup irq handling.Eric W. Biederman2010-10-221-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change the value of UIO_IRQ_NONE -2 to 0. 0 is well defined in the rest of the kernel as the value to indicate an irq has not been assigned. Update the calls to request_irq and free_irq to only ignore UIO_IRQ_NONE and UIO_IRQ_CUSTOM allowing the rest of the kernel's possible irq numbers to be used. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | uio: Don't clear driver dataEric W. Biederman2010-10-221-14/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently uio sets it's driver data to NULL just as it is unregistering attributes. sysfs maks the guaranatee that it will not call attributes after device_destroy is called so this is unncessary and leads to lots of unnecessary code in uio.c Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | uio: Fix lack of locking in init_uio_classEric W. Biederman2010-10-221-43/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no locking in init_uio_class so multiple drivers can race and create multiple uio classes. Fix this by simplifying the code. In particular always register the uio class during module_init and make things simpler. Signed-off-by: Eric W. Biederman <ebiederm@aristanetworks.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | uio: do not use PCI resources before pci_enable_device()Kulikov Vasiliy2010-10-221-6/+7
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IRQ and resource[] may not have correct values until after PCI hotplug setup occurs at pci_enable_device() time. The semantic match that finds this problem is as follows: // <smpl> @@ identifier x; identifier request ~= "pci_request.*|pci_resource.*"; @@ ( * x->irq | * x->resource | * request(x, ...) ) ... *pci_enable_device(x) // </smpl> Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* / llseek: automatically add .llseek fopArnd Bergmann2010-10-151-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
* uio: Remove IRQF_DISABLED flag from uio_cif.cHans J. Koch2010-08-051-1/+1
| | | | | | | | | Remove IRQF_DISABLED since it is deprecated and a no-op in the current kernel. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* uio: Remove IRQF_DISABLED from uio_sercos3.cHans J. Koch2010-08-051-1/+1
| | | | | | | | | | Remove IRQF_DISABLED since it is deprecated and a no-op in the current kernel. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* uio: Remove IRQF_DISABLED flag from uio_pdrv_genirq.cHans J. Koch2010-08-051-1/+0
| | | | | | | | | Remove IRQF_DISABLED flag since it is deprecated and a no-op in the current kernel. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo2010-03-308-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
* UIO: Remove SMX Cryptengine driverHans J. Koch2010-03-083-152/+0
| | | | | | | | | | | | Ben Nizette, the author of this driver, told me in a private mail that this project has been cancelled. He suggested to remove the driver for now, and will come back with a new version should the hardware really exist. This patch completely removes the driver. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Ben Nizette <bn@niasdigital.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UIO: minor Kconfig fixesJohn Ogness2010-03-081-1/+1
| | | | | | | | | | | Two trivial fixes for the Userspace IO Kconfig file: 1) uio_sercos3 is a PCI driver, so let it depend on PCI. 2) "default n" under UIO_PCI_GENERIC is luxury since it is already the default. Acked-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UIO: Add a driver for Hilscher netX-based fieldbus cardsHans J. Koch2010-03-083-0/+184
| | | | | | | | | | | | | This patch adds a Userspace IO driver for netX-based fieldbus cards by Hilscher (see http://www.hilscher.com). ATM, cifX and comX cards are supported. The userspace part for this driver is provided by Hilscher and should come with the card. The driver is in use for several months now and has been tested by people at Hilscher and Linutronix. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Driver core: Constify struct sysfs_ops in struct kobj_typeEmese Revfy2010-03-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: David Teigland <teigland@redhat.com> Acked-by: Matt Domsch <Matt_Domsch@dell.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Acked-by: Jens Axboe <jens.axboe@oracle.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* const: constify remaining dev_pm_opsAlexey Dobriyan2009-12-151-1/+1
| | | | | | Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* uio: pm_runtime_disable is needed if failedKuninori Morimoto2009-11-131-0/+1
| | | | | Signed-off-by: Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* headers: remove sched.h from interrupt.hAlexey Dobriyan2009-10-111-0/+1
| | | | | | | | After m68k's task_thread_info() doesn't refer to current, it's possible to remove sched.h from interrupt.h and not break m68k! Many thanks to Heiko Carstens for allowing this. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
* const: mark struct vm_struct_operationsAlexey Dobriyan2009-09-271-1/+1
| | | | | | | | | | | * mark struct vm_area_struct::vm_ops as const * mark vm_ops in AGP code But leave TTM code alone, something is fishy there with global vm_ops being used. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds2009-09-181-0/+54
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits) sh: mach-ecovec24: Add user debug switch support sh: Kill off unused se_skipped in alignment trap notification code. sh: Wire up HAVE_SYSCALL_TRACEPOINTS. video: sh_mobile_lcdcfb: use both register sets for display panning video: sh_mobile_lcdcfb: implement display panning sh: Fix up sh7705 flush_dcache_page() build. sh: kfr2r09: document the PLL/FLL <-> RF relationship. sh: mach-ecovec24: need asm/clock.h. sh: mach-ecovec24: deassert usb irq on boot. sh: Add KEYSC support for EcoVec24 sh: add kycr2_delay for sh_keysc sh: cpufreq: Include CPU id in info messages. sh: multi-evt support for SH-X3 proto CPU. sh: clkfwk: remove bogus set_bus_parent() from SH7709. sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300) sh: Add EcoVec24 romImage defconfig sh: USB disable process is needed if romImage boot for EcoVec24 sh: EcoVec24: add HIZA setting for LED sh: EcoVec24: write MAC address in boot sh: Add romImage support for EcoVec24 ...
| * uio: Runtime PM for UIO devicesMagnus Damm2009-08-231-0/+54
| | | | | | | | | | | | | | | | | | | | | | This patch modifies the uio_pdrv_genirq driver to support Runtime PM. The power management implementation simply runtime resumes the device at open() time and runtime suspends it at release() time. The user space driver is responsible for re-initializing the hardware after open(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
* | uio: add generic driver for PCI 2.3 devicesMichael S. Tsirkin2009-09-153-0/+218
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds a generic uio driver that can bind to any PCI device. First user will be virtualization where a qemu userspace process needs to give guest OS access to the device. Interrupts are handled using the Interrupt Disable bit in the PCI command register and Interrupt Status bit in the PCI status register. All devices compliant to PCI 2.3 (circa 2002) and all compliant PCI Express devices should support these bits. Driver detects this support, and won't bind to devices which do not support the Interrupt Disable Bit in the command register. It's expected that more features of interest to virtualization will be added to this driver in the future. Possibilities are: mmap for device resources, MSI/MSI-X, eventfd (to interface with kvm), iommu. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | UIO: remove 'default n' from KconfigDaniel Mack2009-09-151-5/+0
|/ | | | | | | | | 'default n' is the default, there is no need for these lines. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UIO: fix specific device driver missing statement for depmodHans J. Koch2009-04-171-0/+1
| | | | | | | | | | | | | | On Fri, Apr 10, 2009 at 01:50:50PM -0700, Andrew Morton wrote: > On Fri, 10 Apr 2009 13:32:01 GMT > bugzilla-daemon@bugzilla.kernel.org wrote: > > > http://bugzilla.kernel.org/show_bug.cgi?id=13059 drivers/uio/uio_cif.c misses a MODULE_DEVICE_TABLE, this fixes it. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UIO: Take offset into account when determining number of pages that can be ↵Ian Abbott2009-03-251-1/+2
| | | | | | | | | | | | | | | mapped If a UIO memory region does not start on a page boundary but straddles one, the number of actual pages that overlap the memory region may be calculated incorrectly because the offset isn't taken into account. If userspace sets the mmap length to offset+size, it may fail with -EINVAL if UIO thinks it's trying to allocate too many pages. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* uio: add the uio_aec driverBrandon Philips2009-03-253-0/+194
| | | | | | | | | | | | | | | | | | | | UIO driver for the Adrienne Electronics Corporation PCI time code device. This device differs from other UIO devices since it uses I/O ports instead of memory mapped I/O. In order to make it possible for UIO to work with this device a utility, uioport, can be used to read and write the ports. uioport is designed to be a setuid program and checks the permissions of the /dev/uio* node and if the user has write permissions it will use iopl and out*/in* to access the device. [1] git clone git://ifup.org/philips/uioport.git Signed-off-by: Brandon Philips <brandon@ifup.org> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UIO: Add name attributes for mappings and port regionsHans J. Koch2009-03-251-0/+22
| | | | | | | | | | | | | | | | | | | If a UIO device has several memory mappings, it can be difficult for userspace to find the right one. The situation becomes even worse if the UIO driver can handle different versions of a card that have different numbers of mappings. Benedikt Spranger has such cards and pointed this out to me. Thanks, Bene! To address this problem, this patch adds "name" sysfs attributes for each mapping. Userspace can use these to clearly identify each mapping. The name string is optional. If a driver doesn't set it, an empty string will be returned, so this patch won't break existing drivers. The same problem exists for port region information, so a "name" attribute is added there, too. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UIO: Pass information about ioports to userspace (V2)Hans J. Koch2009-01-061-17/+142
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devices sometimes have memory where all or parts of it can not be mapped to userspace. But it might still be possible to access this memory from userspace by other means. An example are PCI cards that advertise not only mappable memory but also ioport ranges. On x86 architectures, these can be accessed with ioperm, iopl, inb, outb, and friends. Mike Frysinger (CCed) reported a similar problem on Blackfin arch where it doesn't seem to be easy to mmap non-cached memory but it can still be accessed from userspace. This patch allows kernel drivers to pass information about such ports to userspace. Similar to the existing mem[] array, it adds a port[] array to struct uio_info. Each port range is described by start, size, and porttype. If a driver fills in at least one such port range, the UIO core will simply pass this information to userspace by creating a new directory "portio" underneath /sys/class/uio/uioN/. Similar to the "mem" directory, it will contain a subdirectory (portX) for each port range given. Note that UIO simply passes this information to userspace, it performs no action whatsoever with this data. It's userspace's responsibility to obtain access to these ports and to solve arch dependent issues. The "porttype" attribute tells userspace what kind of port it is dealing with. This mechanism could also be used to give userspace information about GPIOs related to a device. You frequently find such hardware in embedded devices, so I added a UIO_PORT_GPIO definition. I'm not really sure if this is a good idea since there are other solutions to this problem, but it won't hurt much anyway. Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UIO: uio_pdrv_genirq: allow custom irq_flagsMike Frysinger2009-01-061-2/+3
| | | | | | | | | | | I can't think of a reason why the driver prevents people from setting any custom bits in their platform device, but I can think of some reasons for allowing custom flags. Like setting the IRQF_TRIGGER_... bits. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* UIO: use pci_ioremap_bar() in drivers/uioArjan van de Ven2009-01-061-2/+1
| | | | | | | | | | | | Use the newly introduced pci_ioremap_bar() function in drivers/uio. pci_ioremap_bar() just takes a pci device and a bar number, with the goal of making it really hard to get wrong, while also having a central place to stick sanity checks. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* saner FASYNC handling on file closeAl Viro2008-11-011-3/+0
| | | | | | | | | | | | | | As it is, all instances of ->release() for files that have ->fasync() need to remember to evict file from fasync lists; forgetting that creates a hole and we actually have a bunch that *does* forget. So let's keep our lives simple - let __fput() check FASYNC in file->f_flags and call ->fasync() there if it's been set. And lose that crap in ->release() instances - leaving it there is still valid, but we don't have to bother anymore. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds2008-10-201-6/+8
|\ | | | | | | | | * 'bkl-removal' of git://git.lwn.net/linux-2.6: UIO: BKL removal
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 19:51:08 +0100