summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea/ci_hdrc_imx.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: chipidea: imx: add one fsl picophy parameter tuning implementationXu Yang2023-07-251-0/+3
| | | | | | | | | | | | In some cases, the user may need to tune the rise/fall time of the high-speed transmitter waveform for USB Certification. This will add a parameter for this purpose. The value will be fetched from dtb and finally written to the register. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627112126.1882666-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0Xu Yang2023-07-251-4/+6
| | | | | | | | | | | | | | In current driver, the value of tuning parameter will not take effect if samsung,picophy-* is assigned as 0. Because 0 is also a valid value acccording to the description of USB_PHY_CFG1 register, this will improve the logic to let it work. Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Explicitly include correct DT includesRob Herring2023-07-251-0/+1
| | | | | | | | | | | | | | | | The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: don't request QoS for imx8ulpXu Yang2023-06-131-0/+5
| | | | | | | | | | | | Use dedicated imx8ulp usb compatible to remove QoS request since imx8ulp has no such limitation of imx7ulp: DMA will not work if system enters idle. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Message-ID: <20230530104007.1294702-2-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea/ci_hdrc_imx: Convert to platform remove callback returning voidUwe Kleine-König2023-05-281-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517230239.187727-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Use of_property_read_bool() for boolean propertiesRob Herring2023-03-161-3/+3
| | | | | | | | | | | | It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230310144729.1545857-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: use dev_err_probeAlexander Stein2023-01-311-3/+7
| | | | | | | | Add error message if finding USB PHY fails or is deferred. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230130094151.95174-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: Fix a typo ("regualator")Jonathan Neuschäfer2022-11-091-1/+1
| | | | | | | | | Change "regualator" to "regulator" in this comment. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Link: https://lore.kernel.org/r/20221104095838.2132945-1-j.neuschaefer@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: usbmisc: group usbmisc operations for PMLi Jun2022-10-231-34/+15
| | | | | | | | | | As there maybe more APIs of usbmisc for suspend and resume, group them into imx_usbmisc_suspend/resume. Besides, introduced .power_lost_check API, so that proper resume operations can be performed in power lost case. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-6-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: use dev_err_probe()Alexander Stein2022-06-211-16/+7
| | | | | | | | | Use dev_err_probe() to simplify handling errors in ci_hdrc_imx_probe() Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20220614120522.1469957-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probeDan Carpenter2021-11-171-9/+9
| | | | | | | | | | | | | If the first call to devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0) fails with something other than -ENODEV then it leads to an error pointer dereference. For those errors we should just jump directly to the error handling. Fixes: 8253a34bfae3 ("usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle") Cc: stable <stable@vger.kernel.org> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211117074923.GF5237@kili Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandleFabio Estevam2021-10-051-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When passing 'phys' in the devicetree to describe the USB PHY phandle (which is the recommended way according to Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt) the following NULL pointer dereference is observed on i.MX7 and i.MX8MM: [ 1.489344] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000098 [ 1.498170] Mem abort info: [ 1.500966] ESR = 0x96000044 [ 1.504030] EC = 0x25: DABT (current EL), IL = 32 bits [ 1.509356] SET = 0, FnV = 0 [ 1.512416] EA = 0, S1PTW = 0 [ 1.515569] FSC = 0x04: level 0 translation fault [ 1.520458] Data abort info: [ 1.523349] ISV = 0, ISS = 0x00000044 [ 1.527196] CM = 0, WnR = 1 [ 1.530176] [0000000000000098] user address but active_mm is swapper [ 1.536544] Internal error: Oops: 96000044 [#1] PREEMPT SMP [ 1.542125] Modules linked in: [ 1.545190] CPU: 3 PID: 7 Comm: kworker/u8:0 Not tainted 5.14.0-dirty #3 [ 1.551901] Hardware name: Kontron i.MX8MM N801X S (DT) [ 1.557133] Workqueue: events_unbound deferred_probe_work_func [ 1.562984] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--) [ 1.568998] pc : imx7d_charger_detection+0x3f0/0x510 [ 1.573973] lr : imx7d_charger_detection+0x22c/0x510 This happens because the charger functions check for the phy presence inside the imx_usbmisc_data structure (data->usb_phy), but the chipidea core populates the usb_phy passed via 'phys' inside 'struct ci_hdrc' (ci->usb_phy) instead. This causes the NULL pointer dereference inside imx7d_charger_detection(). Fix it by also searching for 'phys' in case 'fsl,usbphy' is not found. Tested on a imx7s-warp board. Fixes: 746f316b753a ("usb: chipidea: introduce imx7d USB charger detection") Cc: stable@vger.kernel.org Reported-by: Heiko Thiery <heiko.thiery@gmail.com> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20210921113754.767631-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: add missing put_device() call in ↵Yu Kuai2020-12-281-1/+5
| | | | | | | | | | | | | | usbmisc_get_init_data() if of_find_device_by_node() succeed, usbmisc_get_init_data() doesn't have a corresponding put_device(). Thus add put_device() to fix the exception handling for this function implementation. Fixes: ef12da914ed6 ("usb: chipidea: imx: properly check for usbmisc") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20201117011430.642589-1-yukuai3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-v5.11-rc1' of ↵Greg Kroah-Hartman2020-12-101-6/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: Below are main changes for v5.11-rc1: For Chipidea USB2: - Add tracepoint support for UDC - Some tiny improvements For Cadence USB3 - Add some quirks for host mode, and let host work well at more use cases * SKIP_PHY_INIT * Disable BEI * Enable runtime PM default for i.mx platform - Some tiny improvements * tag 'usb-v5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: MAINTAINERS: Add myself as a reviewer for CADENCE USB3 DRD IP DRIVER usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data() usb: chipidea: usbmisc_imx: Use of_device_get_match_data() usb: cdns3: fix NULL pointer dereference on no platform data usb: chipidea: trace: fix the endian issue usb: chipidea: add tracepoint support for udc doc: dt-binding: cdns,usb3: add wakeup-irq usb: cdns3: imx: enable runtime pm by default usb: cdns3: add quirk for enable runtime pm by default usb: cdns3: host: disable BEI support usb: cdns3: host: add xhci_plat_priv quirk XHCI_SKIP_PHY_INIT usb: cdns3: host: add .suspend_quirk for xhci-plat.c usb: cdns3: Rids of duplicate error message usb: cdns3: Add static to cdns3_gadget_exit function
| * usb: chipidea: ci_hdrc_imx: Use of_device_get_match_data()Fabio Estevam2020-12-101-6/+1
| | | | | | | | | | | | | | | | | | | | The retrieval of driver data via of_device_get_match_data() can make the code simpler. Use of_device_get_match_data() to simplify the code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* | usb: chipidea: ci_hdrc_imx: Pass DISABLE_DEVICE_STREAMING flag to imx6ulFabio Estevam2020-12-071-1/+2
|/ | | | | | | | | | | | | | | According to the i.MX6UL Errata document: https://www.nxp.com/docs/en/errata/IMX6ULCE.pdf ERR007881 also affects i.MX6UL, so pass the CI_HDRC_DISABLE_DEVICE_STREAMING flag to workaround the issue. Fixes: 52fe568e5d71 ("usb: chipidea: imx: add imx6ul usb support") Cc: <stable@vger.kernel.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Link: https://lore.kernel.org/r/20201207020909.22483-2-peter.chen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: restore pinctrlPeter Chen2020-09-031-1/+7
| | | | | | | | | The pinctrl setting may lost during the system suspend (eg, imx7ulp), it needs to restore them after system resume. Meanwhile, some platforms may need to set special pinctrl for power comsumption. Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: add two samsung picophy parameters tuning implementationPeter Chen2020-08-231-0/+5
| | | | | | | | These two parameters are used to improve USB signal for board level, in this commit, we read it from the dtb, and write to related register during the initialization. Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: get available runtime dr mode for wakeup settingPeter Chen2020-07-281-0/+4
| | | | | | | | | | | | If runtime dr_mode is not dual-role, it doesn't need to enable ID wakeup interrupt. If runtime dr_mode is host, it doesn't need to enable VBUS wakeup interrupt. With these changes, the user will not get the unexpected wakeup for single role use case. For example, the host-only use case at Micro-AB port, the controller should not be waken up by only plug in Micro-AB cable or the Micro-B cable with host. Signed-off-by: Peter Chen <peter.chen@nxp.com>
* Merge tag 'usb-ci-v5.8-rc1' of ↵Greg Kroah-Hartman2020-05-261-1/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Some improvments for ci_hdrc_usb2.c - Support imx7d USB charger - Add software sg support for UDC - Enable user trigger role switch * tag 'usb-ci-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: Enable user-space triggered role-switching usb: chipidea: udc: add software sg list support usb: chipidea: usbmisc_imx: using different ops for imx7d and imx7ulp usb: chipidea: pull down dp for possible charger detection operation usb: chipidea: introduce imx7d USB charger detection usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use usb: chipidea: usb2: remove unneeded semicolon usb: chipidea: allow disabling glue drivers if EMBEDDED usb: chipidea: usb2: absorb zevio glue driver usb: chipidea: usb2: make clock optional usb: chipidea: usb2: fix formatting usb: chipidea: usb2: constify zynq_pdata usb: chipidea: core: show the real pointer value for register usb: chipidea: core: refine the description for this driver usb: chipidea: udc: fix the kernel doc for udc.h
| * usb: chipidea: introduce imx7d USB charger detectionJun Li2020-05-061-1/+12
| | | | | | | | | | | | | | | | | | | | | | imx7d (and imx8mm, imx8mn) uses Samsung PHY and USB generic PHY driver. The USB generic PHY driver is impossible to have a charger detection for every user, so we implement USB charger detection routine at glue layer. After the detection has finished, it will notify USB PHY charger framework, and the uevents will be triggered. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* | drivers: usb: Call cpu_latency_qos_*() instead of pm_qos_*()Rafael J. Wysocki2020-02-141-7/+5
|/ | | | | | | | | | | | | Call cpu_latency_qos_add/remove_request() instead of pm_qos_add/remove_request(), respectively, because the latter are going to be dropped. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org> Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
* usb: chipidea: imx: pinctrl for HSIC is optionalPeter Chen2019-11-181-28/+35
| | | | | | | | | For imx chipidea controllers, if they use mxs PHY, they need pinctrl for HSIC. Otherwise, it doesn't need pinctrl and usbmisc control. Like imx7d and imx8mm. Reported-by: André Draszik <git@andred.net> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: refine the error handling for hsicPeter Chen2019-11-181-6/+9
| | | | | | | - -EPROBE_DEFER is an error, but without need show error message - If pintrol is not existed, as pintrol is NULL Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: change hsic power regulator as optionalPeter Chen2019-11-181-1/+2
| | | | | | Not every platform needs this regulator. Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: check data->usbmisc_data against NULL before accessLi Jun2019-11-181-7/+9
| | | | | | | | | | | | | As usbmisc_data is optional, so add the check before access its member, this fix below static checker warning: drivers/usb/chipidea/ci_hdrc_imx.c:438 ci_hdrc_imx_probe() warn: 'data->usbmisc_data' can also be NULL which is introduced by Patch 15b80f7c3a7f: "usb: chipidea: imx: enable vbus and id wakeup only for OTG events" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: enable vbus and id wakeup only for OTG eventsLi Jun2019-11-181-0/+8
| | | | | | | | If ID or VBUS is from external block, don't enable its wakeup because it isn't used at all. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: fix EPROBE_DEFER support during driver probeAndré Draszik2019-08-151-7/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If driver probe needs to be deferred, e.g. because ci_hdrc_add_device() isn't ready yet, this driver currently misbehaves badly: a) success is still reported to the driver core (meaning a 2nd probe attempt will never be done), leaving the driver in a dysfunctional state and the hardware unusable b) driver remove / shutdown OOPSes: [ 206.786916] Unable to handle kernel paging request at virtual address fffffdff [ 206.794148] pgd = 880b9f82 [ 206.796890] [fffffdff] *pgd=abf5e861, *pte=00000000, *ppte=00000000 [ 206.803179] Internal error: Oops: 37 [#1] PREEMPT SMP ARM [ 206.808581] Modules linked in: wl18xx evbug [ 206.813308] CPU: 1 PID: 1 Comm: systemd-shutdow Not tainted 4.19.35+gf345c93b4195 #1 [ 206.821053] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 206.826813] PC is at ci_hdrc_remove_device+0x4/0x20 [ 206.831699] LR is at ci_hdrc_imx_remove+0x20/0xe8 [ 206.836407] pc : [<805cd4b0>] lr : [<805d62cc>] psr: 20000013 [ 206.842678] sp : a806be40 ip : 00000001 fp : 80adbd3c [ 206.847906] r10: 80b1b794 r9 : 80d5dfe0 r8 : a8192c44 [ 206.853136] r7 : 80db93a0 r6 : a8192c10 r5 : a8192c00 r4 : a93a4a00 [ 206.859668] r3 : 00000000 r2 : a8192ce4 r1 : ffffffff r0 : fffffdfb [ 206.866201] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 206.873341] Control: 10c5387d Table: a9e0c06a DAC: 00000051 [ 206.879092] Process systemd-shutdow (pid: 1, stack limit = 0xb271353c) [ 206.885624] Stack: (0xa806be40 to 0xa806c000) [ 206.889992] be40: a93a4a00 805d62cc a8192c1c a8170e10 a8192c10 8049a490 80d04d08 00000000 [ 206.898179] be60: 00000000 80d0da2c fee1dead 00000000 a806a000 00000058 00000000 80148b08 [ 206.906366] be80: 01234567 80148d8c a9858600 00000000 00000000 00000000 00000000 80d04d08 [ 206.914553] bea0: 00000000 00000000 a82741e0 a9858600 00000024 00000002 a9858608 00000005 [ 206.922740] bec0: 0000001e 8022c058 00000000 00000000 a806bf14 a9858600 00000000 a806befc [ 206.930927] bee0: a806bf78 00000000 7ee12c30 8022c18c a806bef8 a806befc 00000000 00000001 [ 206.939115] bf00: 00000000 00000024 a806bf14 00000005 7ee13b34 7ee12c68 00000004 7ee13f20 [ 206.947302] bf20: 00000010 7ee12c7c 00000005 7ee12d04 0000000a 76e7dc00 00000001 80d0f140 [ 206.955490] bf40: ab637880 a974de40 60000013 80d0f140 ab6378a0 80d04d08 a8080470 a9858600 [ 206.963677] bf60: a9858600 00000000 00000000 8022c24c 00000000 80144310 00000000 00000000 [ 206.971864] bf80: 80101204 80d04d08 00000000 80d04d08 00000000 00000000 00000003 00000058 [ 206.980051] bfa0: 80101204 80101000 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 206.988237] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 206.996425] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 60000030 fee1dead 00000000 00000000 [ 207.004622] [<805cd4b0>] (ci_hdrc_remove_device) from [<805d62cc>] (ci_hdrc_imx_remove+0x20/0xe8) [ 207.013509] [<805d62cc>] (ci_hdrc_imx_remove) from [<8049a490>] (device_shutdown+0x16c/0x218) [ 207.022050] [<8049a490>] (device_shutdown) from [<80148b08>] (kernel_restart+0xc/0x50) [ 207.029980] [<80148b08>] (kernel_restart) from [<80148d8c>] (sys_reboot+0xf4/0x1f0) [ 207.037648] [<80148d8c>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54) [ 207.045308] Exception stack(0xa806bfa8 to 0xa806bff0) [ 207.050368] bfa0: 00000000 00000000 fee1dead 28121969 01234567 00000000 [ 207.058554] bfc0: 00000000 00000000 00000003 00000058 00000000 00000000 00000000 00000000 [ 207.066737] bfe0: 0049ffb0 7ee13d58 0048a84b 76f245a6 [ 207.071799] Code: ebffffa8 e3a00000 e8bd8010 e92d4010 (e5904004) [ 207.078021] ---[ end trace be47424e3fd46e9f ]--- [ 207.082647] Kernel panic - not syncing: Fatal exception [ 207.087894] ---[ end Kernel panic - not syncing: Fatal exception ]--- c) the error path in combination with driver removal causes imbalanced calls to the clk_*() and pm_()* APIs a) happens because the original intended return value is overwritten (with 0) by the return code of regulator_disable() in ci_hdrc_imx_probe()'s error path b) happens because ci_pdev is -EPROBE_DEFER, which causes ci_hdrc_remove_device() to OOPS Fix a) by being more careful in ci_hdrc_imx_probe()'s error path and not overwriting the real error code Fix b) by calling the respective cleanup functions during remove only when needed (when ci_pdev != NULL, i.e. when everything was initialised correctly). This also has the side effect of not causing imbalanced clk_*() and pm_*() API calls as part of the error code path. Fixes: 7c8e8909417e ("usb: chipidea: imx: add HSIC support") Signed-off-by: André Draszik <git@andred.net> Cc: stable <stable@vger.kernel.org> CC: Peter Chen <Peter.Chen@nxp.com> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> CC: Shawn Guo <shawnguo@kernel.org> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Pengutronix Kernel Team <kernel@pengutronix.de> CC: Fabio Estevam <festevam@gmail.com> CC: NXP Linux Team <linux-imx@nxp.com> CC: linux-usb@vger.kernel.org CC: linux-arm-kernel@lists.infradead.org CC: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/20190810150758.17694-1-git@andred.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: "fsl,usbphy" phandle is not mandatory nowPeter Chen2019-06-141-2/+3
| | | | | | | | Since the chipidea common code support get the USB PHY phandle from "phys", the glue layer is not mandatory to get the "fsl,usbphy" phandle any more. Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: add imx7ulp supportPeter Chen2019-06-141-1/+27
| | | | | | | | In this commit, we add CI_HDRC_PMQOS to avoid system entering idle, at imx7ulp, if the system enters idle, the DMA will stop, so the USB transfer can't work at this case. Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: set power polarityPhilipp Puschmann2019-02-271-2/+2
| | | | | | | | | | | | | | | This patch adds support to set the power line polarity for i.MX SoCs. To let the USB controller control the power it may be necessary to configure the polarity of the power line. So far the polarity was configured by Bootloader or alternatively the power line was muxed as gpio and driven by a regulator. Also make use of of_property_read_bool. Signed-off-by: Philipp Puschmann <philipp.puschmann@emlix.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: remove unused header filesJun Li2019-02-271-2/+0
| | | | | | | | Those 2 headers files are not required now. Signed-off-by: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: fix static checker warning for NULL pointerPeter Chen2019-01-181-1/+2
| | | | | | | | | | During the static checker, "data->usbmisc_data" may be NULL. Fix it by adding this pointer judgement before using. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: Warn if oc polarity isn't specifiedUwe Kleine-König2018-12-111-0/+2
| | | | | | | | | | | | The polarity of the over current detection pin isn't configured on i.MX6/7 if it's unspecified in the device tree. So the actual configuration depends on bootloader behavior which is bad. So encourage users to fix their device tree by issuing a warning in this case. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: support configuring for active low oc signalUwe Kleine-König2018-12-111-4/+12
| | | | | | | | | | | | | | | | | | | The status quo on i.MX6 is that if "over-current-active-high" is specified in the device tree this is configured as expected. If the property is missing polarity isn't changed and so the polarity is kept as setup by the bootloader. Reset default is active high, so active low can only be used with help by the bootloader. On i.MX7 it is similar, but there disabling of over current detection has a similar inconsistency. This patch introduces a new property that allows to explicitly configure for active low over current detection and consistently sets this up. In the absence of an explicit configuration the bit is kept as is. On i.MX7 over current detection is used unless disabled in the device tree. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: add HSIC supportPeter Chen2018-12-111-16/+124
| | | | | | | | | | | | To support imx HSIC, there are some special requirement: - The HSIC pad is 1.2v, it may need to supply from external - The data/strobe pin needs to be pulled down first, and after host mode is initialized, the strobe pin needs to be pulled up - During the USB suspend/resume, special setting is needed Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: make MODULE_LICENCE and SPDX-identifier matchMarcus Folkesson2018-09-201-1/+1
| | | | | | | | The SPDX-License-Identifier is set to GPL-2.0+, which correspond to MODULE_LICENSE "GPL". Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: do not use preprocessor conditionals for PMMarcus Folkesson2018-09-201-11/+6
| | | | | | | | | | | Use preprocessor conditionals for CONFIG_PM and CONFIG_PM_SLEEP is not necessary since SET_SYSTEM_SLEEP_PM_OPS and SET_RUNTIME_PM_OPS does that internally. It is also the preferred way according to our coding style guidelines. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: Fix ULPI on imx51Andrey Smirnov2018-05-311-1/+2
| | | | | | | | | | | | | | | | | | | | Workaround introduced for i.MX53 in be9cae2479f48 ("usb: chipidea: imx: Fix ULPI on imx53") seems to be applicable in case of i.MX51 as well. Running latest kernel on ZII RDU1 Board (imx51-zii-rdu1.dts) exhibits a kernel frozen on PORTSC access and applying the workaround resolves the issue. Fixes: be9cae2479f4 ("usb: chipidea: imx: Fix ULPI on imx53") Cc: Peter Chen <peter.chen@nxp.com> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Chris Healy <cphealy@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-usb@vger.kernel.org Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-By: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: Fix ULPI on imx53Sebastian Reichel2018-03-291-0/+12
| | | | | | | | | | | | | Traditionally, PORTSC should be set before initializing ULPI phys. But setting PORTSC before powering on the phy results in a kernel freeze on imx53 based GE PPD. As a workaround this initializes the phy early in the imx platform code and disables phy power management from the core. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flagSebastian Reichel2018-03-291-2/+1
| | | | | | | | Some trivial cleanups, that do not change functionality. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: chipidea: Remove redundant license textGreg Kroah-Hartman2017-11-071-7/+0
| | | | | | | | | | | | | | | | | | Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman2017-11-041-0/+1
| | | | | | | | | | | | | | | | | | | | | It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: configure imx for ULPI phyFabien Lahoudere2016-11-141-0/+4
| | | | | | | | | | | | | | In order to use ULPI phy with usb host 2 and 3, we need to configure controller register to enable ULPI features. Each USB controller have different behaviour, so in order to avoid to have several "swicth(data->index)" and lock/unlock, we prefer to get the index switch and then test for features if they exist for this index. This patch also remove useless test of reg and val. Those two values cannot be NULL. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: set over current polarity per dts settingLi Jun2016-09-141-0/+3
| | | | | | | | | | | imx usb over current polarity is low active by default, with over-current-active-high property added, user can config it to be high active. Meanwhile keep this setting unchanged for existing platforms so new platform must set the right value for active low by its usbmisc init function if over current is enabled. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: delete the redundant setting default DMA mask codePeter Chen2016-04-061-4/+0
| | | | | | | | For each platform devices which is created by device tree, the default DMA mask is set by of_dma_configure when the device are created. So delete the redundant code at driver. Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: imx: avoid EPROBE_DEFER printed as errorStefan Agner2016-02-291-3/+3
| | | | | | | | | Avoid printing an error if adding the device failes with return value EPROBE_DEFFER. This may happen e.g. due to missing GPIO for the vbus-supply regulator. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* Revert "usb: chipidea: imx: enable CI_HDRC_SET_NON_ZERO_TTHA"Peter Chen2016-02-291-1/+0
| | | | | | | | | | | | | | This reverts commit e765bfb73ff7. In the most of cases, we only use one transaction per frame and the frame rate may be high, If the platforms want to support multiple transactions but less frame rate cases like [1] and [2], it can set "non-zero-ttctrl-ttha" at dts. [1] http://www.spinics.net/lists/linux-usb/msg123125.html [2] http://www.spinics.net/lists/linux-usb/msg118679.html Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: add CI_HDRC_TURN_VBUS_EARLY_ON for imx23Stefan Wahren2016-02-291-0/+6
| | | | | | | | | | Until now the imx23 uses the imx27 platform flag. But the imx23 needs the flag CI_HDRC_TURN_VBUS_EARLY_ON, too. So fix this by adding a separate platform flag. Suggested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
* usb: chipidea: implement platform shutdown callbackAndreas Fenkart2015-12-241-0/+6
| | | | | | | | disable wakeup irq during shutdown, otherwise kexec fails for kernels that setup irq handlers before resetting the hardware Signed-off-by: Andreas Fenkart <andreas.fenkart@dev.digitalstrom.org> Signed-off-by: Peter Chen <peter.chen@freescale.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 20:57:36 +0100