summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: chipidea: core: handle power lost in workqueueXu Yang2024-01-282-20/+26
| | | | | | | | | | | | | | | | | | | | | | When power is recycled in usb controller during system power management, the controller will recognize it and switch role if role has been changed during power lost. In current design, it will be completed in resume() function. However, this may bring issues since usb class devices have their pm operations too and these device's resume() functions are still not being called at this point. When usb controller recognized host role should be stopped, these usb class devices will be removed at this point. But these usb class devices can't be removed in some cases, such as scsi devices. Since scsi driver may sync data to U-disk, however it will block there because scsi drvier can only handle pm request when is in suspended state. Therefore, there may exist a dependency between ci_resume() and usb class device's resume(). To break this potential dependency, we need to handle power lost work in a workqueue. Fixes: 74494b33211d ("usb: chipidea: core: add controller resume support when controller is powered off") cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20240119123537.3614838-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: wait controller resume finished for wakeup irqXu Yang2024-01-041-0/+7
| | | | | | | | | | | | | | | | | | | | After the chipidea driver introduce extcon for id and vbus, it's able to wakeup from another irq source, in case the system with extcon ID cable, wakeup from usb ID cable and device removal, the usb device disconnect irq may come firstly before the extcon notifier while system resume, so we will get 2 "wakeup" irq, one for usb device disconnect; and one for extcon ID cable change(real wakeup event), current driver treat them as 2 successive wakeup irq so can't handle it correctly, then finally the usb irq can't be enabled. This patch adds a check to bypass further usb events before controller resume finished to fix it. Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20231228110753.1755756-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always onXu Yang2024-01-041-1/+16
| | | | | | | | | | | | | Some platform using ChipIdea IP may keep 32KHz wakeup clock always on without usb driver intervention. And some may need driver to handle this clock. For now only i.MX93 needs this wakeup clock. This patch will get wakeup clock and keep it always on to make controller work properly. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Tested-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231228110753.1755756-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: Remove usage of the deprecated ida_simple_xx() APIChristophe JAILLET2023-12-151-3/+3
| | | | | | | | | | | | ida_alloc() and ida_free() should be preferred to the deprecated ida_simple_get() and ida_simple_remove(). This is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/8bf382976c0ba0986c0dbe93427266273f0776ef.1702230217.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: udc: Add revision check of 2.20[CI_REVISION_22]Piyush Mehta2023-11-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: Adding a dTD to a Primed Endpoint May Not Get Recognized with revision 2.20a. There is an issue with the add dTD tripwire semaphore (ATDTW bit in USBCMD register) that can cause the controller to ignore a dTD that is added to a primed endpoint. When this happens, the software can read the tripwire bit and the status bit at '1' even though the endpoint is unprimed. This issue observed with the Windows host machine. Workaround: The software must implement a periodic cycle, and check for each dTD pending on execution (Active = 1), if the endpoint is primed. It can do this by reading the corresponding bits in the ENDPTPRIME and ENDPTSTAT registers. If these bits are read at 0, the software needs to re-prime the endpoint by writing 1 to the corresponding bit in the ENDPTPRIME register. Added conditional revision check of 2.20[CI_REVISION_22] along with 2.40. Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20231102070603.777313-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: Fix unused ci_hdrc_usb2_of_match warning for !CONFIG_OFRob Herring2023-10-211-1/+1
| | | | | | | | | | | | | | | | | | Commit 14485de431b0 ("usb: Use device_get_match_data()") dropped the unconditional use of ci_hdrc_usb2_of_match resulting in this warning: drivers/usb/chipidea/ci_hdrc_usb2.c:41:34: warning: unused variable 'ci_hdrc_usb2_of_match' [-Wunused-const-variable] The fix is to drop of_match_ptr() which is not necessary because DT is always used for this driver. Fixes: 14485de431b0 ("usb: Use device_get_match_data()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310131627.M43j234A-lkp@intel.com/ Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20231019183015.841460-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: Add support for NPCMTomer Maimon2023-10-213-0/+119
| | | | | | | | | | | Add Nuvoton NPCM BMC SoCs support to USB ChipIdea driver. NPCM SoC includes ChipIdea IP block that is used for USB device controller mode. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20231017195903.1665260-4-tmaimon77@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flagTomer Maimon2023-10-211-1/+4
| | | | | | | | | | | Adding CI_HDRC_FORCE_VBUS_ACTIVE_ALWAYS flag to modify the vbus_active parameter to active in case the ChipIdea USB IP role is device-only and there is no otgsc register. Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20231017195903.1665260-2-tmaimon77@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Use device_get_match_data()Rob Herring2023-10-101-6/+5
| | | | | | | | | | Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers. Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231009211356.3242037-16-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: tegra: Consistently use dev_err_probe()Michał Mirosław2023-10-021-9/+7
| | | | | | | | | Convert all error exits from probe() to dev_err_probe(). Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/43d03aad1c394d9995f69d13ca1176f9ff8a8dab.1695934946.git.mirq-linux@rere.qmqm.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: Simplify Tegra DMA alignment codeMichał Mirosław2023-10-021-27/+18
| | | | | | | | | | | | | The USB host on Tegra3 works with 32-bit alignment. Previous code tried to align the buffer, but it did align the wrapper struct instead, so the buffer was at a constant offset of 8 bytes (two pointers) from expected alignment. Since kmalloc() guarantees at least 8-byte alignment already, the alignment-extending is removed. Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/a0d917d492b1f91ee0019e68b8e8bca9c585393f.1695934946.git.mirq-linux@rere.qmqm.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: Fix DMA overwrite for TegraMichał Mirosław2023-10-021-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tegra USB controllers seem to issue DMA in full 32-bit words only and thus may overwrite unevenly-sized buffers. One such occurrence is detected by SLUB when receiving a reply to a 1-byte buffer (below). Fix this by allocating a bounce buffer also for buffers with sizes not a multiple of 4. ============================================================================= BUG kmalloc-64 (Tainted: G B ): kmalloc Redzone overwritten ----------------------------------------------------------------------------- 0x8555cd02-0x8555cd03 @offset=3330. First byte 0x0 instead of 0xcc Allocated in usb_get_status+0x2b/0xac age=1 cpu=3 pid=41 __kmem_cache_alloc_node+0x12f/0x1e4 __kmalloc+0x33/0x8c usb_get_status+0x2b/0xac hub_probe+0x5e9/0xcec usb_probe_interface+0xbf/0x21c really_probe+0xa5/0x2c4 __driver_probe_device+0x75/0x174 driver_probe_device+0x31/0x94 __device_attach_driver+0x65/0xc0 bus_for_each_drv+0x4b/0x74 __device_attach+0x69/0x120 bus_probe_device+0x65/0x6c device_add+0x48b/0x5f8 usb_set_configuration+0x37b/0x6b4 usb_generic_driver_probe+0x37/0x68 usb_probe_device+0x35/0xb4 Slab 0xbf622b80 objects=21 used=18 fp=0x8555cdc0 flags=0x800(slab|zone=0) Object 0x8555cd00 @offset=3328 fp=0x00000000 Redzone 8555ccc0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555ccd0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555cce0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555ccf0: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd00: 01 00 00 00 cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd10: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd20: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Object 8555cd30: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc ................ Redzone 8555cd40: cc cc cc cc .... Padding 8555cd74: 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZ CPU: 3 PID: 41 Comm: kworker/3:1 Tainted: G B 6.6.0-rc1mq-00118-g59786f827ea1 #1115 Hardware name: NVIDIA Tegra SoC (Flattened Device Tree) Workqueue: usb_hub_wq hub_event [<8010ca28>] (unwind_backtrace) from [<801090a5>] (show_stack+0x11/0x14) [<801090a5>] (show_stack) from [<805da2fb>] (dump_stack_lvl+0x4d/0x7c) [<805da2fb>] (dump_stack_lvl) from [<8026464f>] (check_bytes_and_report+0xb3/0xe4) [<8026464f>] (check_bytes_and_report) from [<802648e1>] (check_object+0x261/0x290) [<802648e1>] (check_object) from [<802671b1>] (free_to_partial_list+0x105/0x3f8) [<802671b1>] (free_to_partial_list) from [<80268613>] (__kmem_cache_free+0x103/0x128) [<80268613>] (__kmem_cache_free) from [<80425a67>] (usb_get_status+0x73/0xac) [<80425a67>] (usb_get_status) from [<80421b31>] (hub_probe+0x5e9/0xcec) [<80421b31>] (hub_probe) from [<80428bbb>] (usb_probe_interface+0xbf/0x21c) [<80428bbb>] (usb_probe_interface) from [<803ee13d>] (really_probe+0xa5/0x2c4) [<803ee13d>] (really_probe) from [<803ee3d1>] (__driver_probe_device+0x75/0x174) [<803ee3d1>] (__driver_probe_device) from [<803ee501>] (driver_probe_device+0x31/0x94) usb 1-1: device descriptor read/8, error -71 Fixes: fc53d5279094 ("usb: chipidea: tegra: Support host mode") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/ef8466b834c1726f5404c95c3e192e90460146f8.1695934946.git.mirq-linux@rere.qmqm.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add workaround for chipidea PEC bugXu Yang2023-08-094-1/+7
| | | | | | | | | | | | | | | | | | | | Some NXP processors using ChipIdea USB IP have a bug when frame babble is detected. Issue description: In USB camera test, our controller is host in HS mode. In ISOC IN, when device sends data across the micro frame, it causes the babble in host controller. This will clear the PE bit. In spec, it also requires to set the PEC bit and then set the PCI bit. Without the PCI interrupt, the software does not know the PE is cleared. This will add a flag CI_HDRC_HAS_PORTSC_PEC_MISSED to some impacted platform datas. And the ehci host driver will assert PEC by SW when specific conditions are satisfied. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230809024432.535160-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: udc: Remove an unnecessary NULL valueRuan Jinjie2023-08-041-1/+1
| | | | | | | | | | The NULL initialization of the pointers assigned by kzalloc() first is not necessary, because if the kzalloc() failed, the pointers will be assigned NULL, otherwise it works as usual. so remove it. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230804093253.91647-4-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea/core: Use devm_platform_get_and_ioremap_resource()Yangtao Li2023-07-271-2/+1
| | | | | | | | | | Convert platform_get_resource(), devm_ioremap_resource() to a single call to devm_platform_get_and_ioremap_resource(), as this is exactly what this function does. Signed-off-by: Yangtao Li <frank.li@vivo.com> Link: https://lore.kernel.org/r/20230726113816.888-2-frank.li@vivo.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: add USB PHY eventXu Yang2023-07-252-2/+26
| | | | | | | | | | | | | | | | Add USB PHY event for below situation: - usb role changed - vbus connect - vbus disconnect - gadget driver is enumerated USB PHY driver can get the last event after above situation occurs and deal with different situations. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627110353.1879477-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: add one fsl picophy parameter tuning implementationXu Yang2023-07-253-0/+13
| | | | | | | | | | | | In some cases, the user may need to tune the rise/fall time of the high-speed transmitter waveform for USB Certification. This will add a parameter for this purpose. The value will be fetched from dtb and finally written to the register. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627112126.1882666-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: improve logic if samsung,picophy-* parameter is 0Xu Yang2023-07-252-6/+10
| | | | | | | | | | | | | | In current driver, the value of tuning parameter will not take effect if samsung,picophy-* is assigned as 0. Because 0 is also a valid value acccording to the description of USB_PHY_CFG1 register, this will improve the logic to let it work. Fixes: 58a3cefb3840 ("usb: chipidea: imx: add two samsung picophy parameters tuning implementation") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230627112126.1882666-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: Explicitly include correct DT includesRob Herring2023-07-253-2/+5
| | | | | | | | | | | | | | | | The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Herve Codina <herve.codina@bootlin.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230718143027.1064731-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: add missing USB PHY DPDM wakeup settingXu Yang2023-06-131-1/+1
| | | | | | | | | | | | | | USB PHY DPDM wakeup bit is enabled by default, when USB wakeup is not required(/sys/.../wakeup is disabled), this bit should be disabled, otherwise we will have unexpected wakeup if do USB device connect/disconnect while system sleep. This bit can be enabled for both host and device mode. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: turn off vbus comparator when suspendXu Yang2023-06-131-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | As we use bvalid for vbus wakeup source, to save power when suspend, turn off the vbus comparator for imx7d and imx8mm. Below is this bit description from RM of iMX8MM "VBUS Valid Comparator Enable: This signal controls the USB OTG PHY VBUS Valid comparator which indicates whether the voltage on the USB_OTG*_VBUS pin is below the VBUS Valid threshold. The VBUS Valid threshold is nominally 4.75V on this USB PHY. The VBUS Valid threshold can be adjusted using the USBNC_OTGn_PHY_CFG1[OTGTUNE0] bit field. Status of the VBUS Valid comparator, when it is enabled, is reported on the USBNC_OTGn_PHY_STATUS[VBUS_VLD] bit. When OTGDISABLE0 (USBNC_USB_OTGx_PHY_CFG2[10])is set to 1'b0 and DRVVBUS0 is set to 1'b1, the Bandgap circuitry and VBUS Valid comparator are powered, even in Suspend or Sleep mode. DRVVBUS0 should be reset to 1'b0 when the internal VBUS Valid comparator is not required, to reduce quiescent current in Suspend or Sleep mode. - 0 The VBUS Valid comparator is disabled - 1 The VBUS Valid comparator is enabled" Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Message-ID: <20230517081907.3410465-2-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: don't request QoS for imx8ulpXu Yang2023-06-131-0/+5
| | | | | | | | | | | | Use dedicated imx8ulp usb compatible to remove QoS request since imx8ulp has no such limitation of imx7ulp: DMA will not work if system enters idle. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Message-ID: <20230530104007.1294702-2-xu.yang_2@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: remove one duplicated reg defineXu Yang2023-05-291-1/+0
| | | | | | | | | Remove one duplicated definition of MX7D_USB_OTG_PHY_CFG1. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230517081907.3410465-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea/core: Convert to platform remove callback returning voidUwe Kleine-König2023-05-281-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517230239.187727-10-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea/ci_hdrc_usb2: Convert to platform remove callback returning voidUwe Kleine-König2023-05-281-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517230239.187727-9-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea/ci_hdrc_tegra: Convert to platform remove callback returning voidUwe Kleine-König2023-05-281-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517230239.187727-8-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea/ci_hdrc_msm: Convert to platform remove callback returning voidUwe Kleine-König2023-05-281-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517230239.187727-7-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea/ci_hdrc_imx: Convert to platform remove callback returning voidUwe Kleine-König2023-05-281-4/+2
| | | | | | | | | | | | | | | | | | The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Eventually after all drivers are converted, .remove_new() is renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230517230239.187727-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: fix missing goto in `ci_hdrc_probe`Yinhao Hu2023-04-201-1/+1
| | | | | | | | | | | | | | | From the comment of ci_usb_phy_init, it returns an error code if usb_phy_init has failed, and it should do some clean up, not just return directly. Fix this by goto the error handling. Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core") Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Yinhao Hu <dddddd@hust.edu.cn> Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: imx: avoid unnecessary probe deferThomas Ballasi2023-04-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The changes brought by commit 73de93440186 have been inadvertidly removed, causing ci_hdrc_imx's probe to be loaded before usbmisc_imx's, despite ci_hdrc_imx needing usbmisc_imx. This condition may cause unexpected behaviors, especially when the ChipIdea node is being referred to under /sys/class/udc/: $ ls -l /sys/class/udc/ $ when it should show as the following: $ ls -l /sys/class/udc/ ci_hdrc.0 -> ../../devices/[...]/ci_hdrc.0/udc/ci_hdrc.0 Some userspace tools may depend on this feature[1]. [1]: https://github.com/nxp-imx/imx-uuc/blob/69029e71b0642ded83a6c9bfa03102bb310c88ed/linuxrc#L148 Fixes: 95caa2ae70fd ("usb: chipidea: allow disabling glue drivers if EMBEDDED") Signed-off-by: Thomas Ballasi <thomas.ballasi@savoirfairelinux.com> Link: https://lore.kernel.org/r/20230330221637.1605161-1-thomas.ballasi@savoirfairelinux.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 6.3-rc4 into usb-nextGreg Kroah-Hartman2023-03-273-2/+16
|\ | | | | | | | | | | | | We need the USB fixes here, and the USB gadget update for future development patches to be based on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: core: fix possible concurrent when switch roleXu Yang2023-03-233-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The user may call role_store() when driver is handling ci_handle_id_switch() which is triggerred by otg event or power lost event. Unfortunately, the controller may go into chaos in this case. Fix this by protecting it with mutex lock. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230317061516.2451728-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipdea: core: fix return -EINVAL if request role is the same with ↵Xu Yang2023-03-231-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | current role It should not return -EINVAL if the request role is the same with current role, return non-error and without do anything instead. Fixes: a932a8041ff9 ("usb: chipidea: core: add sysfs group") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230317061516.2451728-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: debug: remove redundant 'role' debug fileXu Yang2023-03-231-55/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two 'role' file exist in different position but with totally same function. 1. /sys/devices/platform/soc@0/xxxxxxxx.usb/ci_hdrc.0/role 2. /sys/kernel/debug/usb/ci_hdrc.0/role This will remove the 2rd redundant 'role' debug file (under debugfs) and keep the one which is more closer to user. Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20230317061651.2457567-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: Use of_property_read_bool() for boolean propertiesRob Herring2023-03-162-4/+4
|/ | | | | | | | | | | | It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. Convert reading boolean properties to to of_property_read_bool(). Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230310144729.1545857-1-robh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: chipidea: fix memory leak with using debugfs_lookup()Greg Kroah-Hartman2023-02-061-1/+1
| | | | | | | | | | | When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once. Cc: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20230202153235.2412790-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: chipidea: ci_hdrc_imx: use dev_err_probeAlexander Stein2023-01-311-3/+7
| | | | | | | | Add error message if finding USB PHY fails or is deferred. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Link: https://lore.kernel.org/r/20230130094151.95174-1-alexander.stein@ew.tq-group.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 6.2-rc5 into usb-nextGreg Kroah-Hartman2023-01-231-2/+2
|\ | | | | | | | | | | | | | | | | | | | | We need the USB fixes in here and this resolves merge conflicts as reported in linux-next in the following files: drivers/usb/host/xhci.c drivers/usb/host/xhci.h drivers/usb/typec/ucsi/ucsi.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: core: fix possible constant 0 if use IS_ERR(ci->role_switch)Xu Yang2023-01-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | After successfully probed, ci->role_switch would only be NULL or a valid pointer. IS_ERR(ci->role_switch) will always return 0. So no need to wrap it with IS_ERR, otherwise the logic is wrong. Fixes: e1b5d2bed67c ("usb: chipidea: core: handle usb role switch in a common way") cc: <stable@vger.kernel.org> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221215055409.3760523-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: imx: Drop empty platform remove functionUwe Kleine-König2023-01-061-6/+0
|/ | | | | | | | | A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221212212717.3774606-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 6.1-rc6 into usb-nextGreg Kroah-Hartman2022-11-211-0/+2
|\ | | | | | | | | | | We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: fix deadlock in ci_otg_del_timerDuoming Zhou2022-11-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a deadlock in ci_otg_del_timer(), the process is shown below: (thread 1) | (thread 2) ci_otg_del_timer() | ci_otg_hrtimer_func() ... | spin_lock_irqsave() //(1) | ... ... | hrtimer_cancel() | spin_lock_irqsave() //(2) (block forever) We hold ci->lock in position (1) and use hrtimer_cancel() to wait ci_otg_hrtimer_func() to stop, but ci_otg_hrtimer_func() also need ci->lock in position (2). As a result, the hrtimer_cancel() in ci_otg_del_timer() will be blocked forever. This patch extracts hrtimer_cancel() from the protection of spin_lock_irqsave() in order that the ci_otg_hrtimer_func() could obtain the ci->lock. What`s more, there will be no race happen. Because the "next_timer" is always under the protection of spin_lock_irqsave() and we only check whether "next_timer" equals to NUM_OTG_FSM_TIMERS in the following code. Fixes: 3a316ec4c91c ("usb: chipidea: use hrtimer for otg fsm timers") Cc: stable <stable@kernel.org> Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20220918033312.94348-1-duoming@zju.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: core: wrap ci_handle_power_lost() with CONFIG_PM_SLEEPXu Yang2022-11-091-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If CONFIG_PM_SLEEP is not set, the following error will be shown up when build kernel: error: 'ci_handle_power_lost' defined but not used. This will move ci_handle_power_lost() to an area wrapped by CONFIG_PM_SLEEP. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Fixes: 74494b33211d ("usb: chipidea: core: add controller resume support when controller is powered off") Reported-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221026121157.1491302-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: ci_hdrc_imx: Fix a typo ("regualator")Jonathan Neuschäfer2022-11-091-1/+1
| | | | | | | | | | | | | | | | | | Change "regualator" to "regulator" in this comment. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Link: https://lore.kernel.org/r/20221104095838.2132945-1-j.neuschaefer@gmx.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: usbmisc: add power lost check for imx7ulpLi Jun2022-10-231-0/+1
| | | | | | | | | | | | | | | | | | | | imx7ulp can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related power lost check API. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-9-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: usbmisc: add power lost check for imx7dLi Jun2022-10-231-0/+20
| | | | | | | | | | | | | | | | | | | | imx7d can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related codes to check if power is lost. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-8-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: usbmisc: add power lost check for imx6sxLi Jun2022-10-231-0/+20
| | | | | | | | | | | | | | | | | | | | imx6sx mega off can shutdown domain power supply if none of peripheral in this domain is registered as wakeup source, this patch add related codes to check if power is lost. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-7-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: usbmisc: group usbmisc operations for PMLi Jun2022-10-233-66/+106
| | | | | | | | | | | | | | | | | | | | As there maybe more APIs of usbmisc for suspend and resume, group them into imx_usbmisc_suspend/resume. Besides, introduced .power_lost_check API, so that proper resume operations can be performed in power lost case. Signed-off-by: Li Jun <jun.li@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-6-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: udc: add suspend/resume support for device controllerXu Yang2022-10-231-0/+32
| | | | | | | | | | | | | | | | | | | | The controller's power may be powered off during system suspend. This will add suspend/resume support when the controller suffers power lost. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20221013151442.3262951-5-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: host: add suspend/resume support for host controllerXu Yang2022-10-231-0/+16
| | | | | | | | | | | | | | | | | | The controller's power may be powered off during system suspend. This will add suspend/resume support when the controller suffers power lost. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Link: https://lore.kernel.org/r/20221013151442.3262951-4-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-27 12:12:30 +0100