summaryrefslogtreecommitdiffstats
path: root/drivers/usb/class/cdc-wdm.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* USB: cdc-wdm: Make wdm_flush() interruptible and add wdm_fsync().Oliver Neukum2020-10-021-17/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | syzbot is reporting hung task at wdm_flush() [1], for there is a circular dependency that wdm_flush() from flip_close() for /dev/cdc-wdm0 forever waits for /dev/raw-gadget to be closed while close() for /dev/raw-gadget cannot be called unless close() for /dev/cdc-wdm0 completes. Tetsuo Handa considered that such circular dependency is an usage error [2] which corresponds to an unresponding broken hardware [3]. But Alan Stern responded that we should be prepared for such hardware [4]. Therefore, this patch changes wdm_flush() to use wait_event_interruptible_timeout() which gives up after 30 seconds, for hardware that remains silent must be ignored. The 30 seconds are coming out of thin air. Changing wait_event() to wait_event_interruptible_timeout() makes error reporting from close() syscall less reliable. To compensate it, this patch also implements wdm_fsync() which does not use timeout. Those who want to be very sure that data has gone out to the device are now advised to call fsync(), with a caveat that fsync() can return -EINVAL when running on older kernels which do not implement wdm_fsync(). This patch also fixes three more problems (listed below) found during exhaustive discussion and testing. Since multiple threads can concurrently call wdm_write()/wdm_flush(), we need to use wake_up_all() whenever clearing WDM_IN_USE in order to make sure that all waiters are woken up. Also, error reporting needs to use fetch-and-clear approach in order not to report same error for multiple times. Since wdm_flush() checks WDM_DISCONNECTING, wdm_write() should as well check WDM_DISCONNECTING. In wdm_flush(), since locks are not held, it is not safe to dereference desc->intf after checking that WDM_DISCONNECTING is not set [5]. Thus, remove dev_err() from wdm_flush(). [1] https://syzkaller.appspot.com/bug?id=e7b761593b23eb50855b9ea31e3be5472b711186 [2] https://lkml.kernel.org/r/27b7545e-8f41-10b8-7c02-e35a08eb1611@i-love.sakura.ne.jp [3] https://lkml.kernel.org/r/79ba410f-e0ef-2465-b94f-6b9a4a82adf5@i-love.sakura.ne.jp [4] https://lkml.kernel.org/r/20200530011040.GB12419@rowland.harvard.edu [5] https://lkml.kernel.org/r/c85331fc-874c-6e46-a77f-0ef1dc075308@i-love.sakura.ne.jp Reported-by: syzbot <syzbot+854768b99f19e89d7f81@syzkaller.appspotmail.com> Cc: stable <stable@vger.kernel.org> Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20200928141755.3476-1-penguin-kernel@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: class: cdc-wdm: Provide description for usb_cdc_wdm_register()'s ↵Lee Jones2020-07-151-1/+2
| | | | | | | | | | | | | | | manage_power arg A good attempt was made to document everything else. Fixes the following W=1 kernel build warning(s): drivers/usb/class/cdc-wdm.c:961: warning: Function parameter or member 'manage_power' not described in 'usb_cdc_wdm_register' Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200715093209.3165641-6-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* compat_ioctl: move more drivers to compat_ptr_ioctlArnd Bergmann2019-10-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe <jgg@mellanox.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Darren Hart (VMware) <dvhart@infradead.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* USB: cdc-wdm: fix race between write and disconnect due to flag abuseOliver Neukum2019-08-281-4/+12
| | | | | | | | | | | | | | | | | | | In case of a disconnect an ongoing flush() has to be made fail. Nevertheless we cannot be sure that any pending URB has already finished, so although they will never succeed, they still must not be touched. The clean solution for this is to check for WDM_IN_USE and WDM_DISCONNECTED in flush(). There is no point in ever clearing WDM_IN_USE, as no further writes make sense. The issue is as old as the driver. Fixes: afba937e540c9 ("USB: CDC WDM driver") Reported-by: syzbot+d232cca6ec42c2edb3fc@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190827103436.21143-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-wdm: remove redundant assignment to rvColin Ian King2019-06-031-1/+1
| | | | | | | | | | The variable rv is assigned with a value that is never read and it is re-assigned a new value on the next statement. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: pass return value of recover_from_urb_lossYueHaibing2019-02-191-1/+1
| | | | | | | | 'rv' is the correct return value, pass it upstream instead of 0 Fixes: 17d80d562fd7 ("USB: autosuspend for cdc-wdm") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in ↵Sebastian Andrzej Siewior2018-09-201-1/+1
| | | | | | | | | | | | | | | service_outstanding_interrupt()" This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable <stable@vger.kernel.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-wdm: Fix a sleep-in-atomic-context bug in ↵Jia-Ju Bai2018-09-051-1/+1
| | | | | | | | | | | | | | | | service_outstanding_interrupt() wdm_in_callback() is a completion handler function for the USB driver. So it should not sleep. But it calls service_outstanding_interrupt(), which calls usb_submit_urb() with GFP_KERNEL. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-wdm: use irqsave() in USB's complete callbackSebastian Andrzej Siewior2018-06-281-6/+10
| | | | | | | | | | | | | | | The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: Oliver Neukum <oneukum@suse.com> Cc: "Bjørn Mork" <bjorn@mork.no> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: don't enable interrupts in USB-givebackSebastian Andrzej Siewior2018-06-281-7/+24
| | | | | | | | | | | | | | | | | | | | | | | In the code path __usb_hcd_giveback_urb() -> wdm_in_callback() -> service_outstanding_interrupt() The function service_outstanding_interrupt() will unconditionally enable interrupts during unlock and invoke usb_submit_urb() with GFP_KERNEL. If the HCD completes in BH (like ehci does) then the context remains atomic due local_bh_disable() and enabling interrupts does not change this. Defer the error case handling to a workqueue as suggested by Oliver Neukum. In case of an error the worker performs the read out and wakes the user. Fixes: c1da59dad0eb ("cdc-wdm: Clear read pipeline in case of error") Cc: Robert Foss <robert.foss@collabora.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* vfs: do bulk POLL* -> EPOLL* replacementLinus Torvalds2018-02-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | | This is the mindless scripted replacement of kernel use of POLL* variables as described by Al, done by this script: for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'` for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done done with de-mangling cleanups yet to come. NOTE! On almost all architectures, the EPOLL* constants have the same values as the POLL* constants do. But they keyword here is "almost". For various bad reasons they aren't the same, and epoll() doesn't actually work quite correctly in some cases due to this on Sparc et al. The next patch from Al will sort out the final differences, and we should be all done. Scripted-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* the rest of drivers/*: annotate ->poll() instancesAl Viro2017-11-281-2/+2
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge tag 'usb-4.15-rc1' of ↵Linus Torvalds2017-11-141-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY updates from Greg KH: "Here is the big set of USB and PHY driver updates for 4.15-rc1. There is the usual amount of gadget and xhci driver updates, along with phy and chipidea enhancements. There's also a lot of SPDX tags and license boilerplate cleanups as well, which provide some churn in the diffstat. Other major thing is the typec code that moved out of staging and into the "real" part of the drivers/usb/ tree, which was nice to see happen. All of these have been in linux-next with no reported issues for a while" * tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits) usb: gadget: f_fs: Fix use-after-free in ffs_free_inst USB: usbfs: compute urb->actual_length for isochronous usb: core: message: remember to reset 'ret' to 0 when necessary USB: typec: Remove remaining redundant license text USB: typec: add SPDX identifiers to some files USB: renesas_usbhs: rcar?.h: add SPDX tags USB: chipidea: ci_hdrc_tegra.c: add SPDX line USB: host: xhci-debugfs: add SPDX lines USB: add SPDX identifiers to all remaining Makefiles usb: host: isp1362-hcd: remove a couple of redundant assignments USB: adutux: remove redundant variable minor usb: core: add a new usb_get_ptm_status() helper usb: core: add a 'type' parameter to usb_get_status() usb: core: introduce a new usb_get_std_status() helper usb: core: rename usb_get_status() 'type' argument to 'recip' usb: core: add Status Type definitions USB: gadget: Remove redundant license text USB: gadget: function: Remove redundant license text USB: gadget: udc: Remove redundant license text USB: gadget: legacy: Remove redundant license text ...
| * USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman2017-11-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland2017-10-251-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
* USB: cdc-wdm: ignore -EPIPE from GetEncapsulatedResponseBjørn Mork2017-09-251-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver will forward errors to userspace after turning most of them into -EIO. But all status codes are not equal. The -EPIPE (stall) in particular can be seen more as a result of normal USB signaling than an actual error. The state is automatically cleared by the USB core without intervention from either driver or userspace. And most devices and firmwares will never trigger a stall as a result of GetEncapsulatedResponse. This is in fact a requirement for CDC WDM devices. Quoting from section 7.1 of the CDC WMC spec revision 1.1: The function shall not return STALL in response to GetEncapsulatedResponse. But this driver is also handling GetEncapsulatedResponse on behalf of the qmi_wwan and cdc_mbim drivers. Unfortunately the relevant specs are not as clear wrt stall. So some QMI and MBIM devices *will* occasionally stall, causing the GetEncapsulatedResponse to return an -EPIPE status. Translating this into -EIO for userspace has proven to be harmful. Treating it as an empty read is safer, making the driver behave as if the device was conforming to the CDC WDM spec. There have been numerous reports of issues related to -EPIPE errors from some newer CDC MBIM devices in particular, like for example the Fibocom L831-EAU. Testing on this device has shown that the issues go away if we simply ignore the -EPIPE status. Similar handling of -EPIPE is already known from e.g. usb_get_string() The -EPIPE log message is still kept to let us track devices with this unexpected behaviour, hoping that it attracts attention from firmware developers. Cc: <stable@vger.kernel.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100938 Reported-and-tested-by: Christian Ehrig <christian.ehrig@mediamarktsaturn-bt.com> Reported-and-tested-by: Patrick Chilton <chpatrick@gmail.com> Reported-and-tested-by: Andreas Böhler <news@aboehler.at> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: remove unneeded DRIVER_VERSION defineGreg Kroah-Hartman2017-07-221-4/+0
| | | | | | | | No one uses the DRIVER_VERSION define in this driver, so just delete it. Cc: Oliver Neukum <oneukum@suse.com> Cc: "Bjørn Mork" <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-wdm: use memdup_userGeliang Tang2017-05-171-13/+4
| | | | | | | | Use memdup_user() helper instead of open-coding to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"Bjørn Mork2017-04-251-99/+4
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 833415a3e781 ("cdc-wdm: fix "out-of-sync" due to missing notifications") There have been several reports of wdm_read returning unexpected EIO errors with QMI devices using the qmi_wwan driver. The reporters confirm that reverting prevents these errors. I have been unable to reproduce the bug myself, and have no explanation to offer either. But reverting is the safe choice here, given that the commit was an attempt to work around a firmware problem. Living with a firmware problem is still better than adding driver bugs. Reported-by: Kasper Holtze <kasper@holtze.dk> Reported-by: Aleksander Morgado <aleksander@aleksander.es> Reported-by: Daniele Palmas <dnlplm@gmail.com> Cc: <stable@vger.kernel.org> # v4.9+ Fixes: 833415a3e781 ("cdc-wdm: fix "out-of-sync" due to missing notifications") Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-wdm: remove logically dead codeGustavo A. R. Silva2017-02-151-1/+1
| | | | | | | | | | | | Remove logically dead code. 'cntr' is always equal to zero when the following line of code is executed: rv = cntr ? cntr : -EAGAIN; Addresses-Coverity-ID: 113227 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: add terminating newlineOliver Neukum2016-09-091-10/+10
| | | | | | | Debug messages should be properly terminated. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: cleanup debug messagesOliver Neukum2016-08-151-4/+3
| | | | | | | | | Dynamic debugging will already add the function (and the line number) to a debug message if one requests that. It makes no sense to add them unconditionally in a driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: Clear read pipeline in case of errorRobert Foss2016-08-101-10/+29
| | | | | | | | | | | | | | | | | | | | | Implemented queued response handling. This queue is processed every time the WDM_READ flag is cleared. In case of a read error, userspace may not actually read the data, since the driver returns an error through wdm_poll. After this, the underlying device may attempt to send us more data, but the queue is not processed. While userspace is also blocked, because the read error is never cleared. After this patch, we proactively process the queue on a read error. If there was an outstanding response to handle, that will clear the error (or go through the same logic again, if another read error occurs). If there was no outstanding response, this will bring the queue size back to 0, unblocking a future response from the underlying device. Signed-off-by: Robert Foss <robert.foss@collabora.com> Tested-by: Robert Foss <robert.foss@collabora.com> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: fix "out-of-sync" due to missing notificationsBjørn Mork2016-08-091-4/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver enforces a strict one-to-one relationship between the received RESPONSE_AVAILABLE notifications and messages read from the device. At the same time, it will cancel the interrupt URB when there is no client holding the character device open. Many devices do not cope well with this behaviour. They maintain a FIFO queue of messages, and send notifications on a best effort basis. Messages are queued regardless of whether the notification is successful or not. So if the driver loses a single notification, which can easily happen when the interrupt URB is cancelled, then the device and driver becomes out-of-sync. New messages end up at the end of the queue, while the associated notification makes the driver read only the first message from the queue. This state is permanent from a user point of view. There is no no way to flush the device queue without resetting the device or using another driver. The problem is easy to hit with current QMI and MBIM command line tools, which typically close the character device after seeing the reply they expect. Any pending unsolicited messages from the device will then trigger the driver bug. Fix by always reading all queued messages from the device when the notification URB is first submitted. This is expected to end with an -EPIPE status when there are no more pending messages, so demote the printk associated with -EPIPE to debug level. The workaround has been tested on a large number of different MBIM and QMI devices, as well as the Ericsson F5521gw and H5321gw modems with real Device Management functions. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: use the common CDC parserOliver Neukum2016-07-181-25/+5
| | | | | | | | Now that the common parser resides in USB core, it can be used for CDC-WDM. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: error returns need to be translatedOliver Neukum2015-03-261-1/+1
| | | | | | | | One more case of error codes not correctly being correctly returned to user space. Signed-off-by: Olive Neukum <oneukum@suse.com>0 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: fix endianness bug in debug statementsOliver Neukum2015-03-261-5/+7
| | | | | | | | | Values directly from descriptors given in debug statements must be converted to native endianness. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: unify error handling in writeOliver Neukum2015-03-261-15/+16
| | | | | | | | This makes sure the error handling path is the same for all error conditions, thus reducing code duplication. Signed-off-by: Oliver Neukum <oneukum@suse.de>0 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* cdc-wdm: return correct error codesOliver Neukum2015-03-261-1/+1
| | | | | | | | Lieing to user space is wrong. The real reason for a failure to write should be returned to user space. Signed-off-by: Oliver Neukum <oneukum@suse.de>0 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-wdm: resp_count can be 0 even if WDM_READ is setBjørn Mork2014-01-131-1/+1
| | | | | | | | | | | | | | | | | Do not decrement resp_count if it's already 0. We set resp_count to 0 when the device is closed. The next open and read will try to clear the WDM_READ flag if there was leftover data in the read buffer. This fix is necessary to prevent resubmitting the read URB in a tight loop because resp_count becomes negative. The bug can easily be triggered from userspace by not reading all data in the read buffer, and then closing and reopening the chardev. Fixes: 8dd5cd5395b9 ("usb: cdc-wdm: avoid hanging on zero length reads") Cc: <stable@vger.kernel.org> # 3.13 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.13-rc5 into usb-nextGreg Kroah-Hartman2013-12-241-5/+3
|\ | | | | | | | | | | This resolves the merge issue with drivers/usb/host/ohci-at91.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: cdc-wdm: manage_power should always set needs_remote_wakeupBjørn Mork2013-12-091-5/+3
| | | | | | | | | | | | | | | | Cc: stable <stable@vger.kernel.org> Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: cdc-wdm: avoid hanging on zero length readsBjørn Mork2013-12-201-32/+38
|/ | | | | | | | | | | | | | | | | | | | | | | commit 73e06865ead1 ("USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications") implemented queued response handling. This added a new requirement: The read urb must be resubmitted every time we clear the WDM_READ flag if the response counter indicates that the device is waiting for a read. Fix by factoring out the code handling the WMD_READ clearing and possible urb submission, calling it everywhere we clear the flag. Without this fix, the driver ends up in a state where the read urb is inactive, but the response counter is positive after a zero length read. This prevents the read urb from ever being submitted again and the driver appears to be hanging. Fixes: 73e06865ead1 ("USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications") Cc: Greg Suarez <gsuarez@smithmicro.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> # 3.13 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: cdc-wdm: ignore speed change notificationsBjørn Mork2013-10-301-0/+4
| | | | | | | | | | | | | | | | | | | | | The only notification supported by the Device Management class is Response Available. But this driver is also used as a subdriver of other CDC classes, allowing notifications like Speed Change and Network Connection. This results in log messages which are only confusing to an end user: [66255.801874] cdc_mbim 1-3:1.5: unknown notification 42 received: index 5 len 8 These drivers use cdc-wdm as a subdriver to allow access to an embedded management protocol, and all management is expected to use this protocol. There is therefore no need to handle any of these optional CDC notifications. Instead we can let the cdc-wdm driver recognize them and log a debug level message instead of an error. Reported-by: Rob Gardner <robmatic@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: support back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE ↵Greg Suarez2013-10-301-4/+34
| | | | | | | | | | | | | | | | notifications Some MBIM devices send back-to-back USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications when sending a message over multiple fragments or when there are unsolicited messages available. Count up the number of USB_CDC_NOTIFY_RESPONSE_AVAILABLE notifications received and decrement the count and submit the urb for the next response each time userspace completes a read the response. Signed-off-by: Greg Suarez <gsuarez@smithmicro.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: fix race between interrupt handler and taskletOliver Neukum2013-08-131-4/+9
| | | | | | | | | Both could want to submit the same URB. Some checks of the flag intended to prevent that were missing. Signed-off-by: Oliver Neukum <oneukum@suse.de> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: implement IOCTL_WDM_MAX_COMMANDBjørn Mork2013-03-251-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Userspace applications need to know the maximum supported message size. The cdc-wdm driver translates between a character device stream and a message based protocol. Each message is transported as a usb control message with no further encapsulation or syncronization. Each read or write on the character device should translate to exactly one usb control message to ensure that message boundaries are kept intact. That means that the userspace application must know the maximum message size supported by the device and driver, making this size a vital part of the cdc-wdm character device API. CDC WDM and CDC MBIM functions export the maximum supported message size through CDC functional descriptors. The cdc-wdm and cdc_mbim drivers will parse these descriptors and use the value chosen by the device. The only current way for a userspace application to retrive the value is by duplicating the descriptor parsing. This is an unnecessary complex task, and application writers are likely to postpone it, using a fixed value and adding a "todo" item. QMI functions have no way to tell the host what message size they support. The qmi_wwan driver use a fixed value based on protocol recommendations and observed device behaviour. Userspace applications must know and hard code the same value. This scheme will break if we ever encounter a QMI device needing a device specific message size quirk. We are currently unable to support such a device because using a non default size would break the implicit userspace API. The message size is currently a hidden attribute of the cdc-wdm userspace API. Retrieving it is unnecessarily complex, increasing the possibility of drivers and applications using different limits. The resulting errors are hard to debug, and can only be replicated on identical hardware. Exporting the maximum message size from the driver simplifies the task for the userspace application, and creates a unified information source independent of device and function class. It also serves to document that the message size is part of the cdc-wdm userspace API. This proposed API extension has been presented for the authors of userspace applications and libraries using the current API: libmbim, libqmi, uqmi, oFono and ModemManager. The replies were: Aleksander Morgado: "We do really need max message size for MBIM; and as you say, it may be good to have the max message size info also for QMI, so the new ioctl seems a good addition. So +1 from my side, for what it's worth." Dan Williams: "Yeah, +1 here. I'd prefer the sysfs file, but the fact that that doesn't work for fd passing pretty much kills it." No negative replies are so far received. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: fix buffer overflowOliver Neukum2013-03-131-3/+20
| | | | | | | | | | The buffer for responses must not overflow. If this would happen, set a flag, drop the data and return an error after user space has read all remaining data. Signed-off-by: Oliver Neukum <oliver@neukum.org> CC: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: fix wdm_find_device* return valueBjørn Mork2012-09-111-4/+8
| | | | | | | | | | | A logic error made the wdm_find_device* functions return a bogus pointer into static data instead of the intended NULL no matching device was found. Cc: stable <stable@vger.kernel.org> # v3.4+ Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.5-rc7 into usb-nextGreg Kroah-Hartman2012-07-161-25/+0
|\ | | | | | | | | | | | | This resolves the merge issue with the drivers/usb/host/ehci-omap.c file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: cdc-wdm: QMI devices are now handled by qmi_wwanBjørn Mork2012-06-211-25/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | qmi_wwan has been changed to drive both the control and data interface for all QMI/wwan devices, using cdc-wdm as a subdriver. Remove the stale device ID entries from cdc-wdm. >From now on new QMI/wwan devices will only need to be added to the qmi_wwan driver, regardless of the USB descriptor layout Note that this is not appropriate for stable/longterm kernels despite being a device ID patch. Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: cdc-wdm: fix lockup on error in wdm_readBjørn Mork2012-07-061-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clear the WDM_READ flag on empty reads to avoid running forever in an infinite tight loop, causing lockups: Jul 1 21:58:11 nemi kernel: [ 3658.898647] qmi_wwan 2-1:1.2: Unexpected error -71 Jul 1 21:58:36 nemi kernel: [ 3684.072021] BUG: soft lockup - CPU#0 stuck for 23s! [qmi.pl:12235] Jul 1 21:58:36 nemi kernel: [ 3684.072212] CPU 0 Jul 1 21:58:36 nemi kernel: [ 3684.072355] Jul 1 21:58:36 nemi kernel: [ 3684.072367] Pid: 12235, comm: qmi.pl Tainted: P O 3.5.0-rc2+ #13 LENOVO 2776LEG/2776LEG Jul 1 21:58:36 nemi kernel: [ 3684.072383] RIP: 0010:[<ffffffffa0635008>] [<ffffffffa0635008>] spin_unlock_irq+0x8/0xc [cdc_wdm] Jul 1 21:58:36 nemi kernel: [ 3684.072388] RSP: 0018:ffff88022dca1e70 EFLAGS: 00000282 Jul 1 21:58:36 nemi kernel: [ 3684.072393] RAX: ffff88022fc3f650 RBX: ffffffff811c56f7 RCX: 00000001000ce8c1 Jul 1 21:58:36 nemi kernel: [ 3684.072398] RDX: 0000000000000010 RSI: 000000000267d810 RDI: ffff88022fc3f650 Jul 1 21:58:36 nemi kernel: [ 3684.072403] RBP: ffff88022dca1eb0 R08: ffffffffa063578e R09: 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072407] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000002 Jul 1 21:58:36 nemi kernel: [ 3684.072412] R13: 0000000000000246 R14: ffffffff00000002 R15: ffff8802281d8c88 Jul 1 21:58:36 nemi kernel: [ 3684.072418] FS: 00007f666a260700(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072423] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Jul 1 21:58:36 nemi kernel: [ 3684.072428] CR2: 000000000270d9d8 CR3: 000000022e865000 CR4: 00000000000007f0 Jul 1 21:58:36 nemi kernel: [ 3684.072433] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072438] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 1 21:58:36 nemi kernel: [ 3684.072444] Process qmi.pl (pid: 12235, threadinfo ffff88022dca0000, task ffff88022ff76380) Jul 1 21:58:36 nemi kernel: [ 3684.072448] Stack: Jul 1 21:58:36 nemi kernel: [ 3684.072458] ffffffffa063592e 0000000100020000 ffff88022fc3f650 ffff88022fc3f6a8 Jul 1 21:58:36 nemi kernel: [ 3684.072466] 0000000000000200 0000000100000000 000000000267d810 0000000000000000 Jul 1 21:58:36 nemi kernel: [ 3684.072475] 0000000000000000 ffff880212cfb6d0 0000000000000200 ffff880212cfb6c0 Jul 1 21:58:36 nemi kernel: [ 3684.072479] Call Trace: Jul 1 21:58:36 nemi kernel: [ 3684.072489] [<ffffffffa063592e>] ? wdm_read+0x1a0/0x263 [cdc_wdm] Jul 1 21:58:36 nemi kernel: [ 3684.072500] [<ffffffff8110adb7>] ? vfs_read+0xa1/0xfb Jul 1 21:58:36 nemi kernel: [ 3684.072509] [<ffffffff81040589>] ? alarm_setitimer+0x35/0x64 Jul 1 21:58:36 nemi kernel: [ 3684.072517] [<ffffffff8110aec7>] ? sys_read+0x45/0x6e Jul 1 21:58:36 nemi kernel: [ 3684.072525] [<ffffffff813725f9>] ? system_call_fastpath+0x16/0x1b Jul 1 21:58:36 nemi kernel: [ 3684.072557] Code: <66> 66 90 c3 83 ff ed 89 f8 74 16 7f 06 83 ff a1 75 0a c3 83 ff f4 The WDM_READ flag is normally cleared by wdm_int_callback before resubmitting the read urb, and set by wdm_in_callback when this urb returns with data or an error. But a crashing device may cause both a read error and cancelling all urbs. Make sure that the flag is cleared by wdm_read if the buffer is empty. We don't clear the flag on errors, as there may be pending data in the buffer which should be processed. The flag will instead be cleared on the next wdm_read call. Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: Add Vodafone/Huawei K5005 supportBjørn Mork2012-06-131-0/+9
| | | | | | | Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: Disable hub-initiated LPM for comms devices.Sarah Sharp2012-05-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jan Dumon <j.dumon@option.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* USB: cdc-wdm: remove from device list on disconnectBjørn Mork2012-05-121-3/+9
| | | | | | | | | | | | | | | | | Prevents dereferencing an invalid struct usb_interface pointer. Always delete entry from device list whether or not the rest of the device state cleanup is postponed. The device list uses desc->intf as key, and wdm_open will dereference this key while searching for a matching device. A device should not appear in the list unless probe() has succeeded and disconnect() has not finished. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: cannot use dev_printk when device is goneBjørn Mork2012-05-121-4/+7
| | | | | | | | | | | | | | | | | | We cannot dereference a removed USB interface for dev_printk. Use pr_debug instead where necessary. Flush errors are expected if device is unplugged and are therefore best ingored at this point. Move the kill_urbs() call in wdm_release with dev_dbg() for the non disconnect, as we know it has already been called if WDM_DISCONNECTING is set. This does not actually fix anything, but keeps the code more consistent. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-wdm: poll must return POLLHUP if device is goneBjørn Mork2012-05-121-1/+1
| | | | | | | | | | Else the poll will be restarted indefinitely in a tight loop, preventing final device cleanup. Cc: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.4-rc6 into usb-nextGreg Kroah-Hartman2012-05-071-2/+5
|\ | | | | | | | | | | | | This resolves the conflict with: drivers/usb/host/ehci-tegra.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: cdc-wdm: fix race leading leading to memory corruptionOliver Neukum2012-04-271-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a race whereby a pointer to a buffer would be overwritten while the buffer was in use leading to a double free and a memory leak. This causes crashes. This bug was introduced in 2.6.34 Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: cdc-wdm: cleanup error codesOliver Neukum2012-04-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The internal error codes returned in the write() code path cannot be simply passed on to user space. Signed-off-by: Oliver Neukum <oneukum@suse.de> Tested-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>