summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc2/gadget.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: dwc2: WA for Full speed ISOC IN in DDMA mode.Artur Petrosyan2018-05-211-0/+21
| | | | | | | | | | | | | | By clearing NAK status of EP, core will send ZLP to IN token and assert NAK interrupt relying on TxFIFO status only. The WA applies only to core versions from 2.72a to 4.00a (including both). Also for FS_IOT_1.00a and HS_IOT_1.00a. Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Fix kernel doc's warnings.Grigor Tovmasyan2018-05-211-9/+20
| | | | | | | | | Added descriptions for all not described parameters. Fix all kernel doc's warnings. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Change reading of current frame number flow.Artur Petrosyan2018-05-151-2/+11
| | | | | | | | | | | | | | | | | The current frame_number is read from core for both device and host modes. Reading of the current frame number needs to be performed ASAP due to IRQ latency's. This is why, it is moved to common interrupt handler. Accordingly updated dwc2_gadget_target_frame_elapsed() function which uses stored frame_number instead of reading frame number. In cases when target frame value is incremented the frame_number is required to read again. Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Fix crash in incomplete isoc intr handlers.Artur Petrosyan2018-05-151-3/+3
| | | | | | | | Crash caused by going out of "eps_out" array range. Iteration on "eps_out" changed to less than "num_of_eps". Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Add Interpacket Gap(IPG) feature supportGrigor Tovmasyan2018-05-151-0/+3
| | | | | | | | | | | Added GHWCFG4_IPG_ISOC_SUPPORTED and DCFG_IPG_ISOC_SUPPORDED bits definitions to enable/disable IPG feature. Added ipg_isoc_en core parameter which will indicate IPG support enable/disable and initialize it. Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Enable BNA interrupt for IN endpointsMinas Harutyunyan2018-05-151-1/+3
| | | | | | | | In DDMA mode required to enable BNA interrupt for both directions. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Change ISOC DDMA flowMinas Harutyunyan2018-05-151-142/+137
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changed existing two descriptor-chain flow to one chain. In two-chain implementation BNA interrupt used for switching between two chains. BNA interrupt asserted because of returning to beginning of the chain based on L-bit of last descriptor. Because of that we lose packets. This issue resolved by using one desc-chain. Removed all staff related to two desc-chain flow from DDMA ISOC related functions. Removed request length checking from dwc2_gadget_fill_isoc_desc() function. Request length checking added to dwc2_hsotg_ep_queue() function. If request length greater than descriptor limits then request not added to queue. Additional checking done for High Bandwidth ISOC OUT's which not supported by driver. In dwc2_gadget_fill_isoc_desc() function also checked desc-chain status (full or not) to avoid of reusing not yet processed descriptors. In dwc2_gadget_start_isoc_ddma() function creation of desc-chain always started from descriptor 0. Before filling descriptors, they were initialized by HOST BUSY status. In dwc2_gadget_complete_isoc_request_ddma() added checking for desc-chain rollover. Also added checking completion status. Request completed successfully if DEV_DMA_STS is DEV_DMA_STS_SUCC, otherwise complete with actual=0. For systems with high IRQ latency added pointer compl_desc to next descriptor to be completed by XferCompl interrupt. This pointer replace descriptor index calculation based on DxEPDMA register. On descriptor completion interrupt processing all descriptors starting from compl_desc till descriptor which Buffer Status field not equal DMA_DONE status. Actually removed dwc2_gadget_start_next_isoc_ddma() function because now driver use only one desc-chain and instead that function added dwc2_gadget_handle_isoc_bna() function for handling BNA interrupts. Handling BNA interrupt done by flushing TxFIFOs for OUT EPs, completing request with actual=0 and resetting desc-chain number and target frame to initial values for restarting transfers. On handling NAK request completed with actual=0. Incremented target frame to allow fill desc chain and start transfers. In DDMA mode avoided of frame number incrementing, because tracking of frame number performed in dwc2_gadget_fill_isoc_desc() function. When core assert XferCompl along with BNA, we should ignore XferCompl in dwc2_hsotg_epint() function. On BNA interrupt replaced dwc2_gadget_start_next_isoc_ddma() by above mentioned BNA handler. In dwc2_hsotg_ep_enable() function added sanity check of bInterval for ISOC IN in DDMA mode, because HW doesn't supported EP's with bInterval more than 10 and check for mc for ISOC OUT transfers, because core doesn't support high bandwidth transfers. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Add host/device hibernation functionsVardan Mikayelyan2018-03-131-0/+176
| | | | | | | | | | | | | | | | | | | | | | Add host/device hibernation functions which must be wrapped by core's dwc2_enter_hibernation()/dwc2_exit_hibernation() functions. Make dwc2_backup_global_registers dwc2_restore_global_register non-static to use them in both host/gadget sides. Added function names: dwc2_gadget_enter_hibernation() dwc2_gadget_exit_hibernation() dwc2_host_enter_hibernation() dwc2_host_exit_hibernation() Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: gadget: Add remote_wakeup_allowed flagVardan Mikayelyan2018-03-131-0/+5
| | | | | | | | | | | | | | | | It will be set once corresponding set_feature command comes. True if device is allowed to wake-up host by remote-wakeup signalling. This is preparation for remote wake-up support implementation, it will not be implemented until gadget stack provide interface for bringing remote wake-up signalling. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: gadget: Fix dwc2_restore_device_registersVardan Mikayelyan2018-03-131-12/+26
| | | | | | | | | | | | | | | | | | | | | | Add parameter remote_wakeup to dwc2_restore_device_registers() to be able to restore device registers according to programming guide for dwc-otg. It says that in case of rem_wakeup DCTL must not be restored here. Remove setting of DCTL_PWRONPRGDONE from this function, because it will be done in function responsible for exiting from hibernation. WA for enabled EPx's IN and OUT in DDMA mode. On entering to hibernation wrong value read and saved from DIEPDMAx, as result BNA interrupt asserted on hibernation exit by restoring from saved area. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Artur Petrosyan <arturp@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: gadget: Moved dtxfsiz backup array placeVardan Mikayelyan2018-03-131-0/+2
| | | | | | | | | | Moved dtxfsiz from dwc2_gregs_backup to dwc2_dregs_backup, because it is device register. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Rename hibernation to partial_power_downVardan Mikayelyan2018-03-131-3/+3
| | | | | | | | | | | | | | | No-op change, only rename. This code was misnamed originally. It was only responsible for partial power down and not for hibernation. Rename core_params->hibernation to core_params->power_down, dwc2_set_param_hibernation() to dwc2_set_param_power_down(). Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Enable LPMJohn Youn2018-03-131-0/+4
| | | | | | | | | | Set 'lpm_capable' flag in the gadget structure so indicating that LPM is supported. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: gadget: Use true and false for boolean valuesGustavo A. R. Silva2018-03-131-2/+2
| | | | | | | | | | Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Add core state checkingGrigor Tovmasyan2018-03-131-2/+2
| | | | | | | | Added core state checking in dwc2_hsotg_ep_queue() function to make sure that application will submit requests only in L0 state. Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: gadget: Configure the core to enable LPMSevak Arakelyan2018-03-131-0/+26
| | | | | | | | | | | Configure core in device mode to support LPM according to programming guide. Device will start giving valid responses for LPM tokens. After this patch device side LPM will start working. Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Enable LPM Transaction Received interruptSevak Arakelyan2018-03-131-1/+2
| | | | | | | | | Enable "LPM Transaction Received" interrupt for receive an interrupt when host will send LPM token. Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Add ACG support to the driverRazmik Karapetyan2018-03-131-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added function for supporting Active Clock Gating functionality in the driver. PCGCCTL1 (Power and Clock Control) register will be used for controlling the core`s active clock gating feature, and the previously reserved 12th bit in GHWCFG4 now indicates that the controller supports the Dynamic Power Reduction (Active Clock Gating) during no traffic scenarios such as L0, idle, resume and suspend states. dwc2_enable_acg() function sets GATEEN bit in PCGCCTL1 register and enables ACG, if it supported. According to ACG functional specification, enabling of ACG feature in host mode done in host initialization, before turning Vbus on, specifically in dwc2_core_host_init function. Enabling of ACG feature in device mode done in device initialization, before clearing the SftDiscon bit in DCTL. This bit was cleared in dwc2_hsotg_core_connect() function.So dwc2_enable_acg() called before dwc2_core_connect() calls. Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Rename bit set/clear function namesRazmik Karapetyan2018-03-131-22/+22
| | | | | | | | | | Renamed __orr32 and __bic32 function names to more descriptive dwc2_set_bit and dwc2_clear_bit respectively. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Update GINTSTS_GOUTNAKEFF interrupt handlingRazmik Karapetyan2018-03-131-1/+8
| | | | | | | | | | | Disabled only unmasked endpoints based on DAINTMSK register. This will allow to minimize GINTSTS_GOUTNAKEFF interrupt handling. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Update dwc2_handle_incomplete_isoc_out() functionRazmik Karapetyan2018-03-131-2/+12
| | | | | | | | | | | | | In 'for' loop skipped masked and non-ISOC EPs. Also breaked 'for' loop after setting SGOUTNAK in DCTL,when one enabled EP was detected. This will allow to minimize incomplete ISOC OUT interrupt handling. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Update dwc2_handle_incomplete_isoc_in() functionRazmik Karapetyan2018-03-131-1/+8
| | | | | | | | | | | | Disabled only that ISOC endpoints,for which interrupt bit was set in the DAINTMSK register. This will allow to minimize incomplete ISOC IN interrupt handling. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Use AHB burst size parameterRazmik Karapetyan2018-03-131-1/+1
| | | | | | | | | | In dwc2_hsotg_core_init_disconnected() function used AHB burst size parameter, instead of calculating already calculated value. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Update bit polling functionalitySevak Arakelyan2018-03-131-34/+4
| | | | | | | | | | | | | | | | Move dwc2_hsotg_wait_bit_set function to core.c so it can be used anywhere in the code. Added dwc2_hsotg_wait_bit_clear function in core.c. Replace all the parts of register bit polling code with dwc2_hsotg_wait_bit_set or dwc2_hsotg_wait_bit_clear functions calls depends on code logic. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: eliminate irq parameter from dwc2_gadget_initVardan Mikayelyan2018-03-081-4/+3
| | | | | | | | | The irq is available in hsotg already, so there's no need to pass it as separate function parameter. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Fix dwc2_hsotg_core_init_disconnected()Vardan Mikayelyan2018-02-121-6/+6
| | | | | | | | | | | | | | | We should call dwc2_hsotg_enqueue_setup() after properly setting lx_state. Because it may cause error-out from dwc2_hsotg_enqueue_setup() due to wrong value in lx_state. Issue can be reproduced by loading driver while connected A-Connector (start in A-HOST mode) then disconnect A-Connector to switch to B-DEVICE. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Add safety check for STSPHSERCVD intrMinas Harutyunyan2018-02-121-3/+7
| | | | | | | | | | | | | STSPHSERCVD (status phase received) interrupt should be handled when EP0 is in DWC2_EP0_DATA_OUT state. Sometimes STSPHSERCVD interrupt asserted , when EP0 is not in DATA_OUT state. Spurios interrupt. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Add safety check in setting of descriptor chain pointersMinas Harutyunyan2018-02-121-1/+3
| | | | | | | | | | | | | | | | | In some cases device sending ZLP IN on non EP0 which reassigning EP0 OUT descriptor pointer to that EP. Dedicated for EP0 OUT descriptor multiple time re-used by other EP while that descriptor already in use by EP0 OUT for SETUP transaction. As result when SETUP packet received BNA interrupt asserting. In dwc2_hsotg_program_zlp() function dwc2_gadget_set_ep0_desc_chain() must be called only for EP0. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Fix TxFIFOn sizes and total TxFIFO size issuesMinas Harutyunyan2017-12-111-40/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In host mode reading from DPTXSIZn returning invalid value in dwc2_check_param_tx_fifo_sizes function. In total TxFIFO size calculations unnecessarily reducing by ep_info. hw->total_fifo_size can be fully allocated for FIFO's. Added num_dev_in_eps member in dwc2_hw_params structure to save number of IN EPs. Added g_tx_fifo_size array in dwc2_hw_params structure to store power on reset values of DPTXSIZn registers in forced device mode. Updated dwc2_hsotg_tx_fifo_count() function to get TxFIFO count from num_dev_in_eps. Updated dwc2_get_dev_hwparams() function to store DPTXFSIZn in g_tx_fifo_size array. dwc2_get_host/dev_hwparams() functions call moved after num_dev_in_eps set from hwcfg4. Modified dwc2_check_param_tx_fifo_sizes() function to check TxFIFOn sizes based on g_tx_fifo_size array. Removed ep_info subtraction during calculation of tx_addr_max in dwc2_hsotg_tx_fifo_total_depth() function. Also removed dwc2_hsotg_ep_info_size() function as no more need. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* USB: dwc2: Remove redundant license textGreg Kroah-Hartman2017-11-071-4/+0
| | | | | | | | | | | | | | | | Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Cc: John Youn <johnyoun@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman2017-11-041-0/+1
| | | | | | | | | | | | | | | | | | | | | It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: Fix UDC state trackingJohn Stultz2017-10-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It has been noticed that the dwc2 udc state reporting doesn't seem to work (at least on HiKey boards). Where after the initial setup, the sysfs /sys/class/udc/f72c0000.usb/state file would report "configured" no matter the state of the OTG port. This patch adds a call so that we report to the UDC layer when the gadget device is disconnected. This patch does depend on the previous patch ("usb: dwc2: Improve gadget state disconnection handling") in this patch set in order to properly work. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <hminas@synopsys.com> Tested-by: Minas Harutyunyan <hminas@synopsys.com> Reported-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Error out of dwc2_hsotg_ep_disable() if we're in host modeJohn Stultz2017-10-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've found that while in host mode, using Android, if one runs the command: stop adbd The existing usb devices being utilized in host mode are disconnected. This is most visible with usb networking devices. This seems to be due to adbd closing the file: /dev/usb-ffs/adb/ep0 Which calls ffs_ep0_release() and the following backtrace: [<ffffff800875a430>] dwc2_hsotg_ep_disable+0x148/0x150 [<ffffff800875a498>] dwc2_hsotg_udc_stop+0x60/0x110 [<ffffff8008787950>] usb_gadget_remove_driver+0x58/0x78 [<ffffff80087879e4>] usb_gadget_unregister_driver+0x74/0xe8 [<ffffff80087850c0>] unregister_gadget+0x28/0x58 [<ffffff800878511c>] unregister_gadget_item+0x2c/0x40 [<ffffff8008790ea8>] ffs_data_clear+0xe8/0xf8 [<ffffff8008790ed8>] ffs_data_reset+0x20/0x58 [<ffffff8008793218>] ffs_data_closed+0x98/0xe8 [<ffffff80087932d8>] ffs_ep0_release+0x20/0x30 Then when dwc2_hsotg_ep_disable() is called, we call kill_all_requests() which causes a bunch of the following messages: dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode dwc2 f72c0000.usb: Mode Mismatch Interrupt: currently in Host mode init: Service 'adbd' (pid 1915) killed by signal 9 init: Sending signal 9 to service 'adbd' (pid 1915) process group... init: Successfully killed process cgroup uid 0 pid 1915 in 0ms init: processing action (init.svc.adbd=stopped) from (/init.usb.configfs.rc:15) dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 8 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029 dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 12 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029 dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 15 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029 dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 3 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029 dwc2 f72c0000.usb: dwc2_hc_chhltd_intr_dma: Channel 4 - ChHltd set, but reason is unknown dwc2 f72c0000.usb: hcint 0x00000002, intsts 0x04200029 dwc2 f72c0000.usb: dwc2_update_urb_state_abn(): trimming xfer length And the usb devices connected are basically hung at this point. It seems like if we're in host mode, we probably shouldn't run the dwc2_hostg_ep_disable logic, so this patch returns an error in that case. With this patch (along with the previous patch in this set), we avoid the mismatched interrupts and connected usb devices continue to function. I'm not sure if some other solution would be better here, but this seems to work, so I wanted to send it out for input on what the right approach should be. Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: YongQin Liu <yongqin.liu@linaro.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Acked-by: Minas Harutyunyan <hminas@synopsys.com> Tested-by: Minas Harutyunyan <hminas@synopsys.com> Reported-by: YongQin Liu <yongqin.liu@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: gadget: make usb_ep_ops constBhumika Goyal2017-08-151-1/+1
| | | | | | | | | Make the structure const as it is only stored in the ops field of a usb_ep structure, which is of type const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: gadget: On USB RESET reset device address to zeroMinas Harutyunyan2017-07-181-0/+3
| | | | | | | | | | | | Reseted DEVADDR field in DCFG to zero on USB RESET. Device address in DCFG register does not reset to zero, which required to pass enumeration, after disconnect and reconnect. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Merge tag 'usb-for-v4.11' of ↵Greg Kroah-Hartman2017-01-261-107/+206
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v4.11 Here's the big pull request for the Gadget API. Again the majority of changes sit in dwc2 driver. Most important changes contain a workaround for GOTGCTL being wrong, a sleep-inside-spinlock fix and the big series of cleanups on dwc2. One important thing on dwc3 is that we don't anymore need gadget drivers to cope with unaligned OUT transfers for us. We have support for appending one extra chained TRB to align transfer ourselves. Apart from these, the usual set of typos, non-critical fixes, etc.
| * usb: dwc2: gadget: Set TX FIFO depths to calculated defaultsSevak Arakelyan2017-01-241-0/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove legacy DWC2_G_P_LEGACY_TX_FIFO_SIZE array for TX FIFOs. Update dwc2_set_param_tx_fifo_sizes function to calculate and assign default average FIFO depth to each member of g_tx_fifo_size array. Total FIFO size, EP Info block's size, FIFO operation mode and device operation mode are taken into consideration during the calculation. Cc: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: Avoid sleeping while holding hsotg->lockJohn Stultz2017-01-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Basically when plugging in various cables in different orders, I'm occasionally seeing the following BUG splat: [ 86.215403] BUG: scheduling while atomic: kworker/u16:2/53/0x00000002 [ 86.219164] usb 1-1: USB disconnect, device number 9 [ 86.226845] Preemption disabled at:[ 86.230218] [<ffffff8008673558>] dwc2_conn_id_status_change+0x120/0x250 [ 86.236894] CPU: 0 PID: 53 Comm: kworker/u16:2 Tainted: G W 4.9.0-rc8-00051-gd5a7979-dirty #1702 [ 86.246836] Hardware name: HiKey Development Board (DT) [ 86.252100] Workqueue: dwc2 dwc2_conn_id_status_change [ 86.257279] Call trace: [ 86.259771] [<ffffff8008087c28>] dump_backtrace+0x0/0x1a0 [ 86.265210] [<ffffff8008087ddc>] show_stack+0x14/0x20 [ 86.270308] [<ffffff80084343f0>] dump_stack+0x90/0xb0 [ 86.275401] [<ffffff80080d8d94>] __schedule_bug+0x6c/0xb8 [ 86.280841] [<ffffff8008a07220>] __schedule+0x4f8/0x5b0 [ 86.286099] [<ffffff8008a073e8>] schedule+0x38/0xa0 [ 86.291017] [<ffffff8008a0a6cc>] schedule_hrtimeout_range_clock+0x8c/0xf0 [ 86.297846] [<ffffff8008a0a740>] schedule_hrtimeout_range+0x10/0x18 [ 86.304150] [<ffffff8008a0a4a0>] usleep_range+0x50/0x58 [ 86.309418] [<ffffff800866d8dc>] dwc2_wait_for_mode.isra.4+0x54/0xd0 [ 86.315815] [<ffffff800866f058>] dwc2_core_reset+0xe0/0x168 [ 86.321431] [<ffffff800867e364>] dwc2_hsotg_core_init_disconnected+0x2c/0x310 [ 86.328602] [<ffffff8008673568>] dwc2_conn_id_status_change+0x130/0x250 [ 86.335254] [<ffffff80080ccd48>] process_one_work+0x118/0x370 [ 86.341035] [<ffffff80080ccfe8>] worker_thread+0x48/0x498 [ 86.346473] [<ffffff80080d2eb0>] kthread+0xd0/0xe8 [ 86.351299] [<ffffff8008082e80>] ret_from_fork+0x10/0x50 This seems to be caused by the dwc2_wait_for_mode() calling usleep_range() while the hstog->lock spinlock is held, since we take that before calling dwc2_hsotg_core_init_disconnected(). This patch avoids the issue by adding an extra argument to dwc2_core_reset(), as suggested by John Youn, which allows us to skip the waiting, which should be unnecessary when calling from dwc2_hsotg_core_init_disconnected(). Cc: Wei Xu <xuwei5@hisilicon.com> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Amit Pundir <amit.pundir@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: John Youn <johnyoun@synopsys.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Chen Yu <chenyu56@huawei.com> Cc: Vardan Mikayelyan <mvardan@synopsys.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: Fix usage of bool paramsJohn Youn2017-01-241-1/+1
| | | | | | | | | | | | | | | | Check these parameters only for true or false. There is no need to check for greater or less than 0. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: gadget: Set GDFIFOCFGSevak Arakelyan2017-01-241-0/+3
| | | | | | | | | | | | | | | | | | | | Add programming of GDFIFOCFG register in device mode. It must contain start address for EP Info block and total FIFO depth. Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: Fix sizeof in kzallocJohn Youn2017-01-241-1/+1
| | | | | | | | | | | | | | Take the sizeof '*req' instead of 'struct dwc2_hsotg_req'. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: Fix code indentation after conditionalsJohn Youn2017-01-241-3/+3
| | | | | | | | | | | | | | The indent should be only one tab. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: Fix lines over 80 charactersJohn Youn2017-01-241-5/+9
| | | | | | | | | | | | | | Fix lines over 80 characters. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: Fix brace usageJohn Youn2017-01-241-6/+4
| | | | | | | | | | | | | | | | * Remove braces for one-line statements * Add missing braces where another arm in if-statement uses braces Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: Fix comment alignment and formatJohn Youn2017-01-241-20/+23
| | | | | | | | | | | | | | Fix misaligned and over 80-character comments. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
| * usb: dwc2: Cleanup some checkpatch issuesJohn Youn2017-01-241-72/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commmit is the result of running checkpatch --fix. The results were verified for correctness. Some of the fixes result in line over 80 char which we will fix manually later. The following is a summary of what was done by checkpatch: * Remove externs on function prototypes. * Replace symbolic permissions with octal. * Align code to open parens. * Replace 'unsigned' with 'unsigned int'. * Remove unneccessary blank lines. * Add blank lines after declarations. * Add spaces around operators. * Remove unnecessary spaces after casts. * Replace 'x == NULL' with '!x'. * Replace kzalloc() with kcalloc(). * Concatenate multi-line strings. * Use the BIT() macro. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | usb: dwc2: gadget: Fix GUSBCFG.USBTRDTIM valueAmelie Delaunay2017-01-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | USBTrdTim must be programmed to 0x5 when phy has a UTMI+ 16-bit wide interface or 0x9 when it has a 8-bit wide interface. GUSBCFG reset value (Value After Reset: 0x1400) sets USBTrdTim to 0x5. In case of 8-bit UTMI+, without clearing GUSBCFG.USBTRDTIM mask, USBTrdTim results in 0xD (0x5 | 0x9). That's why we need to clear GUSBCFG.USBTRDTIM mask before setting USBTrdTim value, to ensure USBTrdTim is correctly set in case of 8-bit UTMI+. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* | usb: dwc2: gadget: Fix DMA memory freeingVardan Mikayelyan2017-01-121-11/+3
|/ | | | | | | | | | Remove DMA memory free from EP disable flow by replacing dma_alloc_coherent with dmam_alloc_coherent. Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: fix flags for DMA descriptor allocation in dwc2_hsotg_ep_enableMarek Szyprowski2017-01-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dwc2_hsotg_ep_enable can be called from interrupt context, so all allocations should be done with GFP_ATOMIC flags. This fixes following issue on ARM architecture: [<c010d830>] (unwind_backtrace) from [<c010a51c>] (show_stack+0x10/0x14) [<c010a51c>] (show_stack) from [<c032930c>] (dump_stack+0x74/0x94) [<c032930c>] (dump_stack) from [<c011cd30>] (__warn+0xd4/0x100) [<c011cd30>] (__warn) from [<c011cd7c>] (warn_slowpath_null+0x20/0x28) [<c011cd7c>] (warn_slowpath_null) from [<c0187e04>] (smp_call_function_many+0xcc/0x2a4) [<c0187e04>] (smp_call_function_many) from [<c0188014>] (on_each_cpu_mask+0x38/0xa8) [<c0188014>] (on_each_cpu_mask) from [<c01ddfe0>] (start_isolate_page_range+0x134/0x1b8) [<c01ddfe0>] (start_isolate_page_range) from [<c01a3c14>] (alloc_contig_range+0xac/0x2f8) [<c01a3c14>] (alloc_contig_range) from [<c01de3e4>] (cma_alloc+0xe0/0x1a8) [<c01de3e4>] (cma_alloc) from [<c0110acc>] (__alloc_from_contiguous+0x38/0xe0) [<c0110acc>] (__alloc_from_contiguous) from [<c0110ba4>] (cma_allocator_alloc+0x30/0x38) [<c0110ba4>] (cma_allocator_alloc) from [<c0111034>] (__dma_alloc+0x1c0/0x2c8) [<c0111034>] (__dma_alloc) from [<c01111b4>] (arm_dma_alloc+0x3c/0x48) [<c01111b4>] (arm_dma_alloc) from [<c04ad800>] (dwc2_hsotg_ep_enable+0xec/0x46c) [<c04ad800>] (dwc2_hsotg_ep_enable) from [<c04da610>] (usb_ep_enable+0x2c/0x3c) [<c04da610>] (usb_ep_enable) from [<c04dc0c0>] (ecm_set_alt+0xa8/0x154) [<c04dc0c0>] (ecm_set_alt) from [<c04d678c>] (composite_setup+0xd74/0x1540) [<c04d678c>] (composite_setup) from [<c04ae048>] (dwc2_hsotg_complete_setup+0xb8/0x370) [<c04ae048>] (dwc2_hsotg_complete_setup) from [<c04d987c>] (usb_gadget_giveback_request+0xc/0x10) [<c04d987c>] (usb_gadget_giveback_request) from [<c04acafc>] (dwc2_hsotg_complete_request+0x78/0x128) [<c04acafc>] (dwc2_hsotg_complete_request) from [<c04aed28>] (dwc2_hsotg_epint+0x69c/0x81c) [<c04aed28>] (dwc2_hsotg_epint) from [<c04af6c4>] (dwc2_hsotg_irq+0xfc/0x748) [<c04af6c4>] (dwc2_hsotg_irq) from [<c0163264>] (__handle_irq_event_percpu+0x58/0x140) [<c0163264>] (__handle_irq_event_percpu) from [<c0163368>] (handle_irq_event_percpu+0x1c/0x58) [<c0163368>] (handle_irq_event_percpu) from [<c01633dc>] (handle_irq_event+0x38/0x5c) [<c01633dc>] (handle_irq_event) from [<c01666e4>] (handle_fasteoi_irq+0xc4/0x19c) [<c01666e4>] (handle_fasteoi_irq) from [<c0162a2c>] (generic_handle_irq+0x18/0x28) [<c0162a2c>] (generic_handle_irq) from [<c0162b40>] (__handle_domain_irq+0x6c/0xe4) [<c0162b40>] (__handle_domain_irq) from [<c0101470>] (gic_handle_irq+0x50/0x9c) [<c0101470>] (gic_handle_irq) from [<c010b00c>] (__irq_svc+0x6c/0xa8) Fixes: 5f54c54b0ba83 ("usb: dwc2: gadget: Add DDMA chain pointers to dwc2_hsotg_ep structure") Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Remove unnecessary request length checkingRazmik Karapetyan2016-11-181-10/+0
| | | | | | | | | | | Remove request length checking from dwc2_hsotg_unmap_dma() and dwc2_hsotg_map_dma(). That checking is done in functions called from those functions, usb_gadget_unmap_request_by_dev() and usb_gadget_map_request_by_dev() respectively, so it's unnecessary. Signed-off-by: Razmik Karapetyan <razmik@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-26 18:35:29 +0100