summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host/ehci-fsl.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: host: make ehci_fsl_overrides const and __initconstBhumika Goyal2017-08-311-1/+1
| | | | | | | | Make this structure const as it is not modified. And replace __initdata with __initconst to avoid section conflict error. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ehci: fsl: use bus->sysdev for DMA configurationArnd Bergmann2017-03-231-2/+2
| | | | | | | | | | | For the dual role ehci fsl driver, sysdev will handle the dma config. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: constify dev_pm_ops structuresBhumika Goyal2017-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | Declare dev_pm_ops structures as const as they are only stored in the pm field of a device_driver structure. This field is of type const, so dev_pm_ops structures having similar properties can be declared const too. Size details after cross compiling the .o file for powerpc architecture. File size before: text data bss dec hex filename 3183 372 0 3555 de3 drivers/usb/host/ehci-fsl.o File size after: text data bss dec hex filename 3275 280 0 3555 de3 drivers/usb/host/ehci-fsl.o Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fsl/usb: Workarourd for USB erratum-A005697Changming Huang2016-12-051-0/+3
| | | | | | | | | | | | | | | | | | | | | The EHCI specification states the following in the SUSP bit description: In the Suspend state, the port is sensitive to resume detection. Note that the bit status does not change until the port is suspended and that there may be a delay in suspending a port if there is a transaction currently in progress on the USB. However, in NXP USBDR controller, the PORTSCx[SUSP] bit changes immediately when the application sets it and not when the port is actually suspended. So the application must wait for at least 10 milliseconds after a port indicates that it is suspended, to make sure this port has entered suspended state before initiating this port resume using the Force Port Resume bit. This bit is for NXP controller, not EHCI compatible. Signed-off-by: Changming Huang <jerry.huang@nxp.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@nxp.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/usb/host/fsl: Port USB EHCI host driver for LS102xASriram Dash2016-01-251-10/+14
| | | | | | | | | | | Change Power architecture specific APIs such as in_be32/out_be32 for registers read/write. Instead using ioread/writebe32 which are defined for power as well as arm architecture Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Sriram Dash <sriram.dash@freescale.com> Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers: usb: fsl: Workaround for USB erratum-A005275Nikhil Badola2015-08-151-0/+4
| | | | | | | | | | | | | | | | | | Incoming packets in high speed are randomly corrupted by h/w resulting in multiple errors. This workaround makes FS as default mode in all affected socs by disabling HS chirp signalling.This errata does not affect FS and LS mode. Forces all HS devices to connect in FS mode for all socs affected by this erratum: P3041 and P2041 rev 1.0 and 1.1 P5020 and P5010 rev 1.0 and 2.0 P5040, P1010 and T4240 rev 1.0 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers: usb: fsl: Define usb control register mask for w1c bitsNikhil Badola2015-07-231-9/+16
| | | | | | | | | Define and use CONTROL_REGISTER_W1C_MASK to make sure that w1c bits of usb control register do not get reset while writing any other bit Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers: usb: fsl: Modify phy clk valid bit checkingNikhil Badola2015-07-231-8/+8
| | | | | | | | | Phy_clk_valid bit is checked only when the boolean property phy-clk-valid in present in usb node device tree. This property is added to the usb node via device tree fixup. Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers:usb:fsl: Introduce FSL_USB2_PHY_UTMI_DUAL macroNikhil Badola2015-07-231-0/+1
| | | | | | | | | Introduce FSL_USB2_PHY_UTMI_DUAL macro for setting phy mode in SOCs such has T4240, T1040, T2080 which have utmi dual-phy Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers: usb :fsl: Implement Workaround for USB Erratum A007792Nikhil Badola2015-07-231-0/+9
| | | | | | | | | | | USB controller version-2.5 requires to enable internal UTMI phy and program PTS field in PORTSC register before asserting controller reset. This is must for successful resetting of the controller and subsequent enumeration of usb devices Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers:usb:fsl:Make fsl ehci drv an independent driver moduleRamneek Mehresh2015-05-241-96/+72
| | | | | | | | | | | | Make Freescale EHCI driver an independent entity from ehci-hcd.c. This involves - using module_init/module_exit functions - using overrides structure - some necessary code cleanup Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: drop owner assignment from platform_driversWolfram Sang2015-01-091-1/+0
| | | | | | | | These platform_drivers do not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* host: ehci-fsl: remove duplicate check on resourceVarka Bhadram2014-11-071-9/+3
| | | | | | | | Sanity check on resource happening with devm_ioremap_resource(). Signed-off-by: Varka Bhadram <varkab@cdac.in> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: rename phy to usb_phy in HCDAntoine Tenart2014-09-291-8/+8
| | | | | | | | | | | | | | The USB PHY member of the HCD structure is renamed to 'usb_phy' and modifications are done in all drivers accessing it. This is in preparation to adding the generic PHY support. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> [Sergei: added missing 'drivers/usb/misc/lvstest.c' file, resolved rejects, updated changelog.] Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hub: rename khubd to hub_wq in documentation and commentsPetr Mladek2014-09-241-1/+1
| | | | | | | | | | | | | | | | | | | USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fsl-usb: do not test for PHY_CLK_VALID bit on controller version 1.6Nikita Yushchenko2014-05-041-1/+2
| | | | | | | | | | | | | | | | | | Per reference manuals of Freescale P1020 and P2020 SoCs, USB controller present in these SoCs has bit 17 of USBx_CONTROL register marked as Reserved - there is no PHY_CLK_VALID bit there. Testing for this bit in ehci_fsl_setup_phy() behaves differently on two P1020RDB boards available here - on one board test passes and fsl-usb init succeeds, but on other board test fails, causing fsl-usb init to fail. This patch changes ehci_fsl_setup_phy() not to test PHY_CLK_VALID on controller version 1.6 that (per manual) does not have this bit. Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-fsl: Use devm_ioremap_resource()Jingoo Han2013-12-191-21/+7
| | | | | | | Use devm_ioremap_resource() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-fsl: use dev_warn() instead of printk()Jingoo Han2013-12-191-1/+1
| | | | | | | | Use dev_warn() instead of printk() to provide a better message to userspace. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: hcd: move controller wakeup setting initialization to individual driverPeter Chen2013-12-091-0/+1
| | | | | | | | | | | | | | | Individual controller driver has different requirement for wakeup setting, so move it from core to itself. In order to align with current etting the default wakeup setting is enabled (except for chipidea host). Pass compile test with below commands: make O=outout/all allmodconfig make -j$CPU_NUM O=outout/all drivers/usb Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: kill DEBUG compile optionOliver Neukum2013-12-031-1/+1
| | | | | | | | | | In the drivers that no longer need it, it is removed. It is removed from the Makefile. Drivers not fully converted to dynamic debug have it shifted down into the individual drivers. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.12-rc3 into usb-nextGreg Kroah-Hartman2013-09-301-11/+6
|\ | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitializationShengzhou Liu2013-09-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | In case of usb phy reinitialization: e.g. insmod usb-module(usb works well) -> rmmod usb-module -> insmod usb-module It found the PHY_CLK_VALID bit didn't work if it's not with the power-on reset. So we just check PHY_CLK_VALID bit during the stage with POR, this can be met by the tricky of checking FSL_SOC_USB_PRICTRL register. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phyRamneek Mehresh2013-09-261-9/+3
| | | | | | | | | | | | | | | | | | | | | | For controller versions greater than 1.6, setting ULPI_PHY_CLK_SEL bit when USB_EN bit is already set causes instability issues with PHY_CLK_VLD bit. So USB_EN is set only for IP controller version below 1.6 before setting ULPI_PHY_CLK_SEL bit Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Revert "Revert "USB: EHCI: support running URB giveback in tasklet context""Greg Kroah-Hartman2013-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | This reverts commit 3b8d7321ed4b8511e17048303b806ffcc2806077, which brings back commit 428aac8a81058e2303677a8fbf26670229e51d3a as it should be working for the 3.13-rc1 merge window now that Alan's other fixes are here in the tree already. Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge branch 'master' into usb-nextGreg Kroah-Hartman2013-09-231-1/+1
|\| | | | | | | | | | | | | | | We have USB fixes now in Linus's tree that we need to properly sort out with reverts and the like in the usb-next branch, so merge them together and do it by hand. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Revert "USB: EHCI: support running URB giveback in tasklet context"Greg Kroah-Hartman2013-09-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 428aac8a81058e2303677a8fbf26670229e51d3a. This isn't quite ready for 3.12, we need some more EHCI driver changes that are just now showing up. So revert this for now, and queue it up later for 3.13. Reported-by: Alan Stern <stern@rowland.harvard.edu> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: ehci-fsl: Remove casting the return value which is a void pointerJingoo Han2013-09-171-1/+1
|/ | | | | | | | | Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ehci: enable debugging code when CONFIG_DYNAMIC_DEBUG is setXenia Ragiadakou2013-08-301-1/+1
| | | | | | | | | | The debugging code for ehci is enabled to run if the DEBUG flag is defined. This patch enables the debugging code also when the kernel is configured with dynamic debugging on. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: support running URB giveback in tasklet contextMing Lei2013-08-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All 4 transfer types can work well on EHCI HCD after switching to run URB giveback in tasklet context, so mark all HCD drivers to support it. Also we don't need to release ehci->lock during URB giveback any more. >From below test results on 3 machines(2 ARM and one x86), time consumed by EHCI interrupt handler droped much without performance loss. 1 test description 1.1 mass storage performance test: - run below command 10 times and compute the average performance dd if=/dev/sdN iflag=direct of=/dev/null bs=200M count=1 - two usb mass storage device: A: sandisk extreme USB 3.0 16G(used in test case 1 & case 2) B: kingston DataTraveler G2 4GB(only used in test case 2) 1.2 uvc function test: - run one simple capture program in the below link http://kernel.ubuntu.com/~ming/up/capture.c - capture format 640*480 and results in High Bandwidth mode on the uvc device: Z-Star 0x0ac8/0x3450 - on T410(x86) laptop, also use guvcview to watch video capture/playback 1.3 about test2 and test4 - both two devices involved are tested concurrently by above test items 1.4 how to compute irq time(the time consumed by ehci_irq) - use trace points of irq:irq_handler_entry and irq:irq_handler_exit 1.5 kernel 3.10.0-rc3-next-20130528 1.6 test machines Pandaboard A1: ARM CortexA9 dural core Arndale board: ARM CortexA15 dural core T410: i5 CPU 2.67GHz quad core 2 test result 2.1 test case1: single mass storage device performance test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 25.280(avg:145,max:772) | 25.540(avg:14, max:75) Arndale board: 29.700(avg:33, max:129) | 29.700(avg:10, max:50) T410: 34.430(avg:17, max:154*)| 34.660(avg:12, max:155) --------------------------------------------------------------------- 2.2 test case2: two mass storage devices' performance test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 15.840/15.580(avg:158,max:1216) | 16.500/16.160(avg:15,max:139) Arndale board: 17.370/16.220(avg:33 max:234) | 17.480/16.200(avg:11, max:91) T410: 21.180/19.820(avg:18 max:160) | 21.220/19.880(avg:11, max:149) --------------------------------------------------------------------- 2.3 test case3: one uvc streaming test - uvc device works well(on x86, luvcview can be used too and has same result with uvc capture) -------------------------------------------------------------------- upstream | patched irq time(us) | irq time(us) -------------------------------------------------------------------- Pandaboard A1: (avg:445, max:873) | (avg:33, max:44) Arndale board: (avg:316, max:630) | (avg:20, max:27) T410: (avg:39, max:107) | (avg:10, max:65) --------------------------------------------------------------------- 2.4 test case4: one uvc streaming plus one mass storage device test -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 20.340(avg:259,max:1704)| 20.390(avg:24, max:101) Arndale board: 23.460(avg:124,max:726) | 23.370(avg:15, max:52) T410: 28.520(avg:27, max:169) | 28.630(avg:13, max:160) --------------------------------------------------------------------- 2.5 test case5: read single mass storage device with small transfer - run below command 10 times and compute the average speed dd if=/dev/sdN iflag=direct of=/dev/null bs=4K count=4000 1), test device A: -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 6.5(avg:21, max:64) | 6.5(avg:10, max:24) Arndale board: 8.13(avg:12, max:23) | 8.06(avg:7, max:17) T410: 6.66(avg:13, max:131) | 6.84(avg:11, max:149) --------------------------------------------------------------------- 2), test device B: -------------------------------------------------------------------- upstream | patched perf(MB/s)+irq time(us) | perf(MB/s)+irq time(us) -------------------------------------------------------------------- Pandaboard A1: 5.5(avg:21,max:43) | 5.49(avg:10, max:24) Arndale board: 5.9(avg:12, max:22) | 5.9(avg:7, max:17) T410: 5.48(avg:13, max:155) | 5.48(avg:7, max:140) --------------------------------------------------------------------- * On T410, sometimes read ehci status register in ehci_irq takes more than 100us, and the problem has been reported on the link: http://marc.info/?t=137065867300001&r=1&w=2 Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: host: use dev_get_platdata()Jingoo Han2013-08-011-7/+7
| | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: fsl: add missing platform_driver ownerLibo Chen2013-05-171-0/+1
| | | | | | | | set the owner of platform_driver, to ensure that the caller of driver holds a module refernece Signed-off-by: Libo Chen <libo.chen@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EHCI: Quirk flag for port power handling on overcurrent.Christian Engelmayer2013-04-031-0/+9
| | | | | | | | | | | | | | | | | | | | | | | Commit 756aa6b3d536afe85e151138cb03a293998887b3 (ehci-hub: improved over-current recovery) added port power cycling on overcurrent indications as needed by the MPC8349 USB controller after resolving of the overcurrent situation in order to have the host state machine assert the correct port status again. Commit 81463c1d707186adbbe534016cd1249edeab0dac (EHCI: only power off port if over-current is active) solved a thus resulting issue of endless overcurrent changes in combination with the MAX4967 USB power supply chip that signals overcurrent when power is not enabled by only powering off a port if the overcurrent is currently active. Added quirks flag need_oc_pp_cycle in order to specify the needed behaviour as there is no common behaviour that can comply with both requirements. Activated the quirks handling for Freescale 83xx based boards. Signed-off-by: Christian Engelmayer <christian.engelmayer@frequentis.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-fsl: fix regression on mpc5121eAnatolij Gustschin2013-01-121-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... Machine check in kernel mode. Caused by (from SRR1=49030): Transfer error ack signal Oops: Machine check, sig: 7 [#1] MPC5121 ADS Modules linked in: NIP: c025fd60 LR: c0265bb4 CTR: 00000000 REGS: df82dac0 TRAP: 0200 Not tainted (3.7.0-rc7-00641-g81e6c91) MSR: 00049030 <EE,ME,IR,DR> CR: 42002024 XER: 20000000 TASK = df824b70[1] 'swapper' THREAD: df82c000 GPR00: 00000000 df82db70 df824b70 df3ed0f0 00000003 00000000 00000000 00000000 GPR08: 00000020 32000000 c03550ec 20000000 22002028 00000000 c0003f5c 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c0423898 c0450000 GPR24: 00000077 00000002 e5086180 1c000c00 e5086000 df33ec00 00000003 df34e000 NIP [c025fd60] ehci_fsl_setup_phy+0xd0/0x354 LR [c0265bb4] ehci_fsl_setup+0x220/0x284 ... Fix it by checking 'have_sysif_regs' flag before register access. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: EHCI: remove ehci_port_power() routineAlan Stern2012-10-311-1/+0
| | | | | | | | | | | | | | | This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-fsl: Return valid error in ehci_fsl_setup_phyBen Collins2012-10-191-1/+1
| | | | | | | | | | | | | ehci_fsl_setup_phy is supposed to return an int, but had a void return value in the case of controller_ver being invalid. Introduced by commit 3735ba8db8e6 ("powerpc/usb: fix bug of CPU hang when missing USB PHY clock"), which missed one return. Signed-off-by: Ben Collins <ben.c@servergy.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* powerpc/usb: remove checking PHY_CLK_VALID for UTMI PHYShengzhou Liu2012-09-241-2/+1
| | | | | | | | | | | | | PHY_CLK_VALID bit doesn't work properly with UTMI PHY. e.g. This bit is always zero on P5040, etc. There is no need to check this bit for UTMI PHY, just keep checking for ULPI PHY to prevent system hanging. This patch should be squashed into previous commit 3735ba8db8e6e "powerpc/usb: fix bug of CPU hang when missing USB PHY clock" Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* powerpc/usb: fix bug of CPU hang when missing USB PHY clockShengzhou Liu2012-09-061-18/+40
| | | | | | | | | when missing USB PHY clock, kernel booting up will hang during USB initialization. We should check USBGP[PHY_CLK_VALID] bit to avoid CPU hanging in this case. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-fsl: Update ifdef check to work on 64-bit ppcKumar Gala2012-07-171-1/+1
| | | | | | | | | We need to use CONFIG_FSL_SOC_BOOKE instead of CONFIG_PPC_85xx as CONFIG_PPC_85xx isn't defined when we build support for 64-bit embedded FSL PPC SoCs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* EHCI: centralize controller initializationAlan Stern2012-07-091-17/+1
| | | | | | | | | | | | | | | | | | | | | | This patch (as1564c) converts the EHCI platform drivers to use the central ehci_setup() routine for generic controller initialization rather than each having its own idiosyncratic approach. The major point of difficulty lies in ehci-pci's many vendor- and device-specific workarounds. Some of them have to be applied before calling ehci_setup() and some after, which necessitates a fair amount of code motion. The other platform drivers require much smaller changes. One point not addressed by the patch is whether ports should be powered on or off following initialization. The different drivers appear to handle this pretty much at random. In fact it shouldn't matter, because the hub driver turns on power to all ports when it binds to the root hub. Straightening that out will be left for another day. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'xceiv-for-v3.6' of ↵Greg Kroah-Hartman2012-07-061-5/+6
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next usb: phy: patches for v3.6 merge window We are starting to support multiple USB phys as we should thanks for Kishon's work. DeviceTree support for USB PHYs won't come until discussion with DeviceTree maintainer is finished. Together with that series, we have one fix for twl4030 which missed a IRQF_ONESHOT annotation when requesting a threaded IRQ without a top half handler, and removal of an unused variable compilation warning to isp1301_omap.
| * usb: phy: fix return value check of usb_get_phyKishon Vijay Abraham I2012-07-021-2/+3
| | | | | | | | | | | | | | | | | | usb_get_phy will return -ENODEV if it's not able to find the phy. Hence fixed all the callers of usb_get_phy to check for this error condition instead of relying on a non-zero value as success condition. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: otg: support for multiple transceivers by a single controllerKishon Vijay Abraham I2012-06-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | Add a linked list for keeping multiple PHY instances with different types so that we can have separate USB2 and USB3 PHYs on one single board. _get_phy_ has been changed so that the controller gets the transceiver by type. _remove_phy_ has been added to let the phy be removed from the phy list. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: otg: utils: rename function name in OTG utilsKishon Vijay Abraham I2012-06-251-3/+3
| | | | | | | | | | | | | | | | | | _transceiver() in otg.c is replaced with _phy. usb_set_transceiver is replaced with usb_add_phy to make it similar to other usb standard function names like usb_add_hcd. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | USB: move transceiver from ehci_hcd and ohci_hcd to hcd and rename it as phyRichard Zhao2012-06-131-11/+10
|/ | | | | | | | | | - to decrease redundant since both ehci_hcd and ohci_hcd have the same variable - it helps access phy in usb core code - phy is more meaningful than transceiver Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: ehci-fsl: Use usb_put_transceiver instead of put_deviceJarkko Nikula2012-05-141-3/+2
| | | | | | | | | | | | Currently usb_put_transceiver calls put_device so this is a no-op but it is better to keep API usage consistent as ehci->transceiver is allocated with usb_get_transceiver. While at there remove one extra ehci->transceiver test as the code block has already tested it. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.4-rc4 into usb-next.Greg Kroah-Hartman2012-04-231-9/+27
|\ | | | | | | | | | | | | | | | | This resolves the conflict in: drivers/usb/host/ehci-fsl.c And picks up loads of xhci bugfixes to make it easier for others to test with. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * fsl/usb: Add controller version based ULPI and UTMI phy supportRamneek Mehresh2012-04-181-7/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for ULPI and UTMI PHYs based on usb controller version info read from device-tree Example of USB Controller versioning info: Version 1.2 and below : MPC8536, MPC8315, etc Version 1.6 : P1020, P1010, P2020, P5020, etc Version 2.2 : PSC9131, PSC9132, P3060, etc No changes for non-DT users Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Acked-by: Li Yang <leoli@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: ehci-fsl: Fix kernel crash on mpc5121eAnatolij Gustschin2012-04-181-1/+6
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 28c56ea1431421dec51b7b229369e991481453df (powerpc/usb: fix bug of kernel hang when initializing usb) the kernel crashes on mpc5121e. mpc5121e doesn't have system interface registers, accessing this register address space cause the machine check exception and a kernel crash: ... [ 1.294596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.316491] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 1.337334] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 1.358548] Machine check in kernel mode. [ 1.375917] Caused by (from SRR1=49030): Transfer error ack signal [ 1.395505] Oops: Machine check, sig: 7 [#1] [ 1.413113] MPC5121 ADS [ 1.428718] Modules linked in: [ 1.444841] NIP: c026efc4 LR: c0278b50 CTR: 00000000 [ 1.463342] REGS: df837ba0 TRAP: 0200 Not tainted (3.3.0-08839-gb5174fa) [ 1.484083] MSR: 00049030 <EE,ME,IR,DR> CR: 42042022 XER: 20000000 [ 1.504099] TASK = df834000[1] 'swapper' THREAD: df836000 [ 1.509667] GPR00: 1c000000 df837c50 df834000 df9d74e0 00000003 00000010 00000000 00000000 [ 1.531650] GPR08: 00000020 00000000 c037cdd8 e1088000 22042028 1001a69c 00000000 00000000 [ 1.553762] GPR16: 1ffbce70 00000000 1fef5b28 1fef3e08 00000000 00000000 1ffcbc7c c045b264 [ 1.575824] GPR24: 0000008b 00000002 c04a7dd0 e1088000 df33c960 df9d74e0 00000000 df9d7400 [ 1.612295] NIP [c026efc4] ehci_fsl_setup_phy+0x110/0x124 [ 1.632454] LR [c0278b50] ehci_fsl_setup+0x29c/0x304 [ 1.652065] Call Trace: [ 1.668923] [df837c50] [c0278a40] ehci_fsl_setup+0x18c/0x304 (unreliable) [ 1.690332] [df837c70] [c025cba4] usb_add_hcd+0x1f0/0x66c [ 1.710377] [df837cb0] [c0277ab8] ehci_fsl_drv_probe+0x180/0x308 [ 1.731322] [df837ce0] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.752202] [df837cf0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.773491] [df837d10] [c01f956c] bus_for_each_drv+0x6c/0xa8 [ 1.794279] [df837d40] [c01fafdc] device_attach+0xb4/0xd8 [ 1.814574] [df837d60] [c01fa44c] bus_probe_device+0xa4/0xb4 [ 1.835343] [df837d80] [c01f87a8] device_add+0x52c/0x5dc [ 1.855462] [df837dd0] [c01fcd58] platform_device_add+0x124/0x1d0 [ 1.876558] [df837df0] [c036dcec] fsl_usb2_device_register+0xa0/0xd4 [ 1.897512] [df837e10] [c036df28] fsl_usb2_mph_dr_of_probe+0x208/0x264 [ 1.918253] [df837e90] [c01fc7a8] platform_drv_probe+0x20/0x30 [ 1.938300] [df837ea0] [c01fb0ac] driver_probe_device+0x8c/0x214 [ 1.958511] [df837ec0] [c01fb2f0] __driver_attach+0xbc/0xc0 [ 1.978088] [df837ee0] [c01f9608] bus_for_each_dev+0x60/0x9c [ 1.997589] [df837f10] [c01fab88] driver_attach+0x24/0x34 [ 2.016757] [df837f20] [c01fa744] bus_add_driver+0x1ac/0x274 [ 2.036339] [df837f50] [c01fb898] driver_register+0x88/0x150 [ 2.056052] [df837f70] [c01fcabc] platform_driver_register+0x68/0x78 [ 2.076650] [df837f80] [c0446500] fsl_usb2_mph_dr_driver_init+0x18/0x28 [ 2.097734] [df837f90] [c0003988] do_one_initcall+0x148/0x1b0 [ 2.117934] [df837fc0] [c042d89c] kernel_init+0xfc/0x190 [ 2.137667] [df837ff0] [c000d2c4] kernel_thread+0x4c/0x68 [ 2.157240] Instruction dump: [ 2.174119] 90050004 4e800020 2f840003 419e0014 2f840004 409eff64 6400c000 4bffff5c [ 2.196000] 64001000 7c0004ac 812b0500 0c090000 <4c00012c> 61290200 7c0004ac 912b0500 [ 2.218100] ---[ end trace 21659aedb84ad816 ]--- [ 2.237089] [ 3.232940] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.232954] [ 3.271575] Rebooting in 1 seconds.. Check pdata->have_sysif_regs flag before accessing system interface registers. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.3-rc7 into usb-nextGreg Kroah-Hartman2012-03-121-16/+31
|\ | | | | | | | | | | | | This resolves the conflict with drivers/usb/host/ehci-fsl.h that happened with changes in Linus's and this branch at the same time. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'xceiv-for-v3.4' of ↵Greg Kroah-Hartman2012-03-011-3/+3
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next USB: transceiver changes for 3.4 Here we have a big rework done by Heikki Krogerus (thanks) which splits OTG functionality away from transceivers. We have known for quite a long time that struct otg_transceiver was a bad name for the structure, considering transceiver is far from being OTG-specific (see 4e67185).
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 16:36:23 +0100