summaryrefslogtreecommitdiffstats
path: root/drivers/usb/host (follow)
Commit message (Collapse)AuthorAgeFilesLines
* xhci: init command timeout timer earlier to avoid deleting it uninitializedMathias Nyman2015-09-221-6/+5
| | | | | | | | | | | | | | Don't check if timer is running with a timer_pending() before deleting it with del_timer_sync(), this defies the whole point of the sync part and can cause a possible race. Instead we just want to make sure the timer is initialized early enough before we have a chance to delete it. Cc: <stable@vger.kernel.org> Reported-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: change xhci 1.0 only restrictions to support xhci 1.1Mathias Nyman2015-09-222-5/+5
| | | | | | | | | | | | | Some changes between xhci 0.96 and xhci 1.0 specifications forced us to check the hci version in code, some of these checks were implemented as hci_version == 1.0, which will not work with new xhci 1.1 controllers. xhci 1.1 behaves similar to xhci 1.0 in these cases, so change these checks to hci_version >= 1.0 Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: exit early in xhci_setup_device() if we're halted or dyingRoger Quadros2015-09-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During quick plug/removal of OTG adapter during dual-role testing it can happen that xhci_alloc_device() is called for the newly detected device after the DRD library has called xhci_stop to remove the HCD. If that is the case, just fail early to prevent the following warning. [ 154.732649] hub 4-0:1.0: USB hub found [ 154.742204] hub 4-0:1.0: 1 port detected [ 154.824458] hub 3-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 154.854609] hub 4-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 154.944430] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 154.951009] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.038191] xhci-hcd xhci-hcd.0.auto: remove, state 4 [ 155.043315] usb usb4: USB disconnect, device number 1 [ 155.055270] xhci-hcd xhci-hcd.0.auto: xhci_stop [ 155.060094] xhci-hcd xhci-hcd.0.auto: USB bus 4 deregistered [ 155.066576] xhci-hcd xhci-hcd.0.auto: remove, state 1 [ 155.071710] usb usb3: USB disconnect, device number 1 [ 155.077124] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.082389] ------------[ cut here ]------------ [ 155.087690] WARNING: CPU: 0 PID: 72 at drivers/usb/host/xhci.c:3800 xhci_setup_device+0x410/0x484 [xhci_hcd]() [ 155.097861] Modules linked in: sd_mod usb_storage scsi_mod usb_f_ss_lb g_zero libcomposite ipv6 xhci_plat_hcd xhci_hcd usbcore dwc3 udc_core evdev ti_am335x_adc joydev kfifo_buf industrialio snd_soc_simple_cc [ 155.146734] CPU: 0 PID: 72 Comm: kworker/0:3 Tainted: G W 4.1.4-00834-gcd9380b-dirty #50 [ 155.156073] Hardware name: Generic AM43 (Flattened Device Tree) [ 155.162117] Workqueue: usb_hub_wq hub_event [usbcore] [ 155.167249] Backtrace: [ 155.169751] [<c0012af0>] (dump_backtrace) from [<c0012c8c>] (show_stack+0x18/0x1c) [ 155.177390] r6:c089d4a4 r5:ffffffff r4:00000000 r3:ee46c000 [ 155.183137] [<c0012c74>] (show_stack) from [<c05f7c14>] (dump_stack+0x84/0xd0) [ 155.190446] [<c05f7b90>] (dump_stack) from [<c00439ac>] (warn_slowpath_common+0x80/0xbc) [ 155.198605] r7:00000009 r6:00000ed8 r5:bf27eb70 r4:00000000 [ 155.204348] [<c004392c>] (warn_slowpath_common) from [<c0043a0c>] (warn_slowpath_null+0x24/0x2c) [ 155.213202] r8:ee49f000 r7:ee7c0004 r6:00000000 r5:ee7c0158 r4:ee7c0000 [ 155.220051] [<c00439e8>] (warn_slowpath_null) from [<bf27eb70>] (xhci_setup_device+0x410/0x484 [xhci_hcd]) [ 155.229816] [<bf27e760>] (xhci_setup_device [xhci_hcd]) from [<bf27ec10>] (xhci_address_device+0x14/0x18 [xhci_hcd]) [ 155.240415] r10:ee598200 r9:00000001 r8:00000002 r7:00000001 r6:00000003 r5:00000002 [ 155.248363] r4:ee49f000 [ 155.250978] [<bf27ebfc>] (xhci_address_device [xhci_hcd]) from [<bf20cb94>] (hub_port_init+0x1b8/0xa9c [usbcore]) [ 155.261403] [<bf20c9dc>] (hub_port_init [usbcore]) from [<bf2101e0>] (hub_event+0x738/0x1020 [usbcore]) [ 155.270874] r10:ee598200 r9:ee7c0000 r8:ee7c0038 r7:ee518800 r6:ee49f000 r5:00000001 [ 155.278822] r4:00000000 [ 155.281426] [<bf20faa8>] (hub_event [usbcore]) from [<c005754c>] (process_one_work+0x128/0x340) [ 155.290196] r10:00000000 r9:00000003 r8:00000000 r7:fedfa000 r6:eeec5400 r5:ee598314 [ 155.298151] r4:ee434380 [ 155.300718] [<c0057424>] (process_one_work) from [<c00578f8>] (worker_thread+0x158/0x49c) [ 155.308963] r10:ee434380 r9:00000003 r8:eeec5400 r7:00000008 r6:ee434398 r5:eeec5400 [ 155.316913] r4:eeec5414 [ 155.319482] [<c00577a0>] (worker_thread) from [<c005cc40>] (kthread+0xdc/0xf8) [ 155.326765] r10:00000000 r9:00000000 r8:00000000 r7:c00577a0 r6:ee434380 r5:ee4441c0 [ 155.334713] r4:00000000 r3:00000000 [ 155.338341] [<c005cb64>] (kthread) from [<c000fc08>] (ret_from_fork+0x14/0x2c) [ 155.345626] r7:00000000 r6:00000000 r5:c005cb64 r4:ee4441c0 [ 155.356108] ---[ end trace a58d34c223b190e6 ]--- [ 155.360783] xhci-hcd xhci-hcd.0.auto: Virt dev invalid for slot_id 0x1! [ 155.574404] xhci-hcd xhci-hcd.0.auto: xhci_setup_device [ 155.579667] ------------[ cut here ]------------ Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: stop everything on the first call to xhci_stopRoger Quadros2015-09-221-15/+5
| | | | | | | | | | | | | | xhci_stop will be called twice, once for the shared hcd and again for the primary hcd. We stop the XHCI controller in any case so clean up everything on the first call else we can timeout waiting for pending requests to complete. Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: Clear XHCI_STATE_DYING on startRoger Quadros2015-09-221-1/+2
| | | | | | | | | | | For whatever reason if XHCI died in the previous instant then it will never recover on the next xhci_start unless we clear the DYING flag. Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: lock mutex on xhci_stopRoger Quadros2015-09-221-0/+4
| | | | | | | | | Else it races with xhci_setup_device Cc: <stable@vger.kernel.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: Move xhci_pme_quirk() behind #ifdef CONFIG_PMTomer Barletz2015-09-221-45/+45
| | | | | | | | | | | xhci_pme_quirk() is only used when CONFIG_PM is defined. Compiling a kernel without PM complains about this function [reworded commit message -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Tomer Barletz <barletz@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* xhci: give command abortion one more chance before killing xhciMathias Nyman2015-09-221-0/+9
| | | | | | | | | | We want to give the command abortion an additional try to stop the command ring before we completely hose xhci. Cc: <stable@vger.kernel.org> Tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: ehci-sys: delete useless bus_to_hcd conversionPeter Chen2015-08-181-4/+4
| | | | | | | | | | The ehci platform device's drvdata is the pointer of struct usb_hcd already, so we doesn't need to call bus_to_hcd conversion again. Cc: <stable@vger.kernel.org> Signed-off-by: Peter Chen <peter.chen@freescale.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: host: ohci-at91: merge loops in ohci_hcd_at91_drv_probeAlexandre Belloni2015-08-151-18/+16
| | | | | | | | | ohci_hcd_at91_drv_probe() has four at91_for_each_port. They can be merged into two loops without changing the driver behaviour. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: host: ohci-at91: merge ohci_at91_of_init in ohci_hcd_at91_drv_probeAlexandre Belloni2015-08-151-82/+63
| | | | | | | | | As device tree support is now mandatory, merge ohci_at91_of_init() in ohci_hcd_at91_drv_probe(). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: host: ohci-at91: depend on OFAlexandre Belloni2015-08-152-12/+5
| | | | | | | | | | Make the driver depend on CONFIG_OF and remove the now useless #ifdef Also, fix the Kconfig indentation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: host: ohci-at91: move at91_usbh_data definition in c fileAlexandre Belloni2015-08-151-0/+11
| | | | | | | | | Move struct at91_usbh_data back in ohci-at91.c as this is the only user left after switching all at91 platforms to DT only. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers: usb: fsl: Workaround for USB erratum-A005275Nikhil Badola2015-08-154-0/+27
| | | | | | | | | | | | | | | | | | Incoming packets in high speed are randomly corrupted by h/w resulting in multiple errors. This workaround makes FS as default mode in all affected socs by disabling HS chirp signalling.This errata does not affect FS and LS mode. Forces all HS devices to connect in FS mode for all socs affected by this erratum: P3041 and P2041 rev 1.0 and 1.1 P5020 and P5010 rev 1.0 and 2.0 P5040, P1010 and T4240 rev 1.0 Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 4.2-rc6 into usb-nextGreg Kroah-Hartman2015-08-102-2/+3
|\ | | | | | | | | | | We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * drivers/usb: Delete XHCI command timer if necessaryGavin Shan2015-08-031-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When xhci_mem_cleanup() is called, it's possible that the command timer isn't initialized and scheduled. For those cases, to delete the command timer causes soft-lockup as below stack dump shows. The patch avoids deleting the command timer if it's not scheduled with the help of timer_pending(). NMI watchdog: BUG: soft lockup - CPU#40 stuck for 23s! [kworker/40:1:8140] : NIP [c000000000150b30] lock_timer_base.isra.34+0x90/0xa0 LR [c000000000150c24] try_to_del_timer_sync+0x34/0xa0 Call Trace: [c000000f67c975e0] [c0000000015b84f8] mon_ops+0x0/0x8 (unreliable) [c000000f67c97620] [c000000000150c24] try_to_del_timer_sync+0x34/0xa0 [c000000f67c97660] [c000000000150cf0] del_timer_sync+0x60/0x80 [c000000f67c97690] [c00000000070ac0c] xhci_mem_cleanup+0x5c/0x5e0 [c000000f67c97740] [c00000000070c2e8] xhci_mem_init+0x1158/0x13b0 [c000000f67c97860] [c000000000700978] xhci_init+0x88/0x110 [c000000f67c978e0] [c000000000701644] xhci_gen_setup+0x2b4/0x590 [c000000f67c97970] [c0000000006d4410] xhci_pci_setup+0x40/0x190 [c000000f67c979f0] [c0000000006b1af8] usb_add_hcd+0x418/0xba0 [c000000f67c97ab0] [c0000000006cb15c] usb_hcd_pci_probe+0x1dc/0x5c0 [c000000f67c97b50] [c0000000006d3ba4] xhci_pci_probe+0x64/0x1f0 [c000000f67c97ba0] [c0000000004fe9ac] local_pci_probe+0x6c/0x130 [c000000f67c97c30] [c0000000000e5ce8] work_for_cpu_fn+0x38/0x60 [c000000f67c97c60] [c0000000000eacb8] process_one_work+0x198/0x470 [c000000f67c97cf0] [c0000000000eb6ac] worker_thread+0x37c/0x5a0 [c000000f67c97d80] [c0000000000f2730] kthread+0x110/0x130 [c000000f67c97e30] [c000000000009660] ret_from_kernel_thread+0x5c/0x7c Cc: <stable@vger.kernel.org> Reported-by: Priya M. A <priyama2@in.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: fix off by one error in TRB DMA address boundary checkMathias Nyman2015-08-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to check that a TRB is part of the current segment before calculating its DMA address. Previously a ring segment didn't use a full memory page, and every new ring segment got a new memory page, so the off by one error in checking the upper bound was never seen. Now that we use a full memory page, 256 TRBs (4096 bytes), the off by one didn't catch the case when a TRB was the first element of the next segment. This is triggered if the virtual memory pages for a ring segment are next to each in increasing order where the ring buffer wraps around and causes errors like: [ 106.398223] xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 0 comp_code 1 [ 106.398230] xhci_hcd 0000:00:14.0: Looking for event-dma fffd3000 trb-start fffd4fd0 trb-end fffd5000 seg-start fffd4000 seg-end fffd4ff0 The trb-end address is one outside the end-seg address. Cc: <stable@vger.kernel.org> Tested-by: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: xHCI 1.1: Stopped - Short Packet Capability (SPC)Lu Baolu2015-08-093-5/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables xhci driver to support SPC by handling Stopped - Short Packet event in transfer event path. If SPC = '1' and the stop endpoint command is executed, after a Short Packet condition has been detected, but before the end of the TD has been reached, (i.e. the TD is in progress for pipe), then a Transfer Event TRB with its Completion Code set to Stopped - Short Packet and its TRB Transfer Length set to value of the EDTLA shall be forced for the interrupted TRB, irrespective of whether its IOC or ISP flags are set. This Transfer Event TRB will precede the Command Completion Event TRB for the command, and is referred to as a Stopped Transfer Event. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: xHCI 1.1: Contiguous Frame ID Capability (CFC)Lu Baolu2015-08-093-13/+187
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the Contiguous Frame ID Capability is supported (CFC = 1), then the xHC shall match the Frame ID in every Isoch TD with SIA = 0 against the Frame Index of the MFINDEX register. This rule ensures resynchronization of Isoch TDs even if some are dropped due to Missed Service Errors or Stopping the endpoint. This patch enables xHCI driver to support CFC by calculating and setting the Frame ID field of an Isoch TRB. [made some dbg messages checkpatch friendly -Mathias] Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: Add support for URB_ZERO_PACKET to bulk/sg transfersReyad Attiyat2015-08-092-14/+57
| | | | | | | | | | | | | | | | | | | | This commit checks for the URB_ZERO_PACKET flag and creates an extra zero-length td if the urb transfer length is a multiple of the endpoint's max packet length. Signed-off-by: Reyad Attiyat <reyad.attiyat@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: make USB_XHCI_PLATFORM selectableRafał Miłecki2015-08-091-1/+8
| | | | | | | | | | | | | | | | | | | | | | Right now xhci-plat-hcd can be built when using one of platform specific drivers only (mvebu/rcar). There shouldn't be such limitation as some platforms may not require any quirks and may want to just use a generic driver ("generic-xhci" / "xhci-hcd"). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: xhci: Simplify return statementSaurabh Karajgaonkar2015-08-051-5/+1
| | | | | | | | | | | | | | Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: u132-hcd: Simplify return statementSaurabh Karajgaonkar2015-08-051-26/+9
| | | | | | | | | | | | | | Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: oxu210hp-hcd: Simplify return statementSaurabh Karajgaonkar2015-08-051-6/+1
| | | | | | | | | | | | | | Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: ehci-st: Simplify return statementSaurabh Karajgaonkar2015-08-051-6/+1
| | | | | | | | | | | | | | | | Replace redundant variable use in return statement. Signed-off-by: Saurabh Karajgaonkar <skarajga@visteon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: ehci-platform: Fix using multiple controllers from OFAlban Bedel2015-08-051-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When using OF defined controllers the platform data struct is shared between all devices, so it can't be used for device specific settings. However it is currently used for the OF properties needs-reset-on-resume and has-transaction-translator. To fix this issue move setting hcd->has_tt to the probe and move pdata->reset_on_resume to the private data. Signed-off-by: Alban Bedel <albeu@free.fr> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Merge 4.2-rc4 into usb-nextGreg Kroah-Hartman2015-07-278-17/+80
|\| | | | | | | | | | | | | We want the USB fixes that went into that release in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: OHCI: fix bad #define in ohci-tmio.cAlan Stern2015-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | An incorrect definition of CCR_PM_USBPW3 in ohci-tmio.c is a perennial source of invalid diagnoses from static scanners, such as in <http://marc.info/?l=linux-usb&m=143634574527641&w=2>. This patch fixes the definition. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: David Binderman <dcb314@hotmail.com> CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: OHCI: Fix race between ED unlink and URB submissionAlan Stern2015-07-221-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug introduced by commit 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies"). The commit changed ed_state from ED_UNLINK to ED_IDLE too early, before finish_urb() had been called. The user-visible consequence is that the driver occasionally crashes or locks up when an URB is submitted while another URB for the same endpoint is being unlinked. This patch moves the ED state change later, to the right place. The drawback is that now we may unnecessarily execute some instructions multiple times when a controller dies. Since controllers dying is an exceptional occurrence, a little wasted time won't matter. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Heiko Przybyl <lil_tux@web.de> Tested-by: Heiko Przybyl <lil_tux@web.de> Fixes: 977dcfdc60311e7aa571cabf6f39c36dde13339e CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: do not report PLC when link is in internal resume stateZhuang Jin Can2015-07-221-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Port link change with port in resume state should not be reported to usbcore, as this is an internal state to be handled by xhci driver. Reporting PLC to usbcore may cause usbcore clearing PLC first and port change event irq won't be generated. Cc: <stable@vger.kernel.org> Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: prevent bus_suspend if SS port resuming in phase 1Zhuang Jin Can2015-07-223-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the link is just waken, it's in Resume state, and driver sets PLS to U0. This refers to Phase 1. Phase 2 refers to when the link has completed the transition from Resume state to U0. With the fix of xhci: report U3 when link is in resume state, it also exposes an issue that usb3 roothub and controller can suspend right after phase 1, and this causes a hard hang in controller. To fix the issue, we need to prevent usb3 bus suspend if any port is resuming in phase 1. [merge separate USB2 and USB3 port resume checking to one -Mathias] Cc: <stable@vger.kernel.org> Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: report U3 when link is in resume stateZhuang Jin Can2015-07-221-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xhci_hub_report_usb3_link_state() returns pls as U0 when the link is in resume state, and this causes usb core to think the link is in U0 while actually it's in resume state. When usb core transfers control request on the link, it fails with TRB error as the link is not ready for transfer. To fix the issue, report U3 when the link is in resume state, thus usb core knows the link it's not ready for transfer. Cc: <stable@vger.kernel.org> Signed-off-by: Zhuang Jin Can <jin.can.zhuang@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Calculate old endpoints correctly on device resetBrian Campbell2015-07-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When resetting a device the number of active TTs may need to be corrected by xhci_update_tt_active_eps, but the number of old active endpoints supplied to it was always zero, so the number of TTs and the bandwidth reserved for them was not updated, and could rise unnecessarily. This affected systems using Intel's Patherpoint chipset, which rely on software bandwidth checking. For example, a Lenovo X230 would lose the ability to use ports on the docking station after enough suspend/resume cycles because the bandwidth calculated would rise with every cycle when a suitable device is attached. The correct number of active endpoints is calculated in the same way as in xhci_reserve_bandwidth. Cc: <stable@vger.kernel.org> Signed-off-by: Brian Campbell <bacam@z273.org.uk> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: xhci: Bugfix for NULL pointer deference in xhci_endpoint_init() functionAMAN DEEP2015-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virt_dev->num_cached_rings counts on freed ring and is not updated correctly. In xhci_free_or_cache_endpoint_ring() function, the free ring is added into cache and then num_rings_cache is incremented as below: virt_dev->ring_cache[rings_cached] = virt_dev->eps[ep_index].ring; virt_dev->num_rings_cached++; here, free ring pointer is added to a current index and then index is incremented. So current index always points to empty location in the ring cache. For getting available free ring, current index should be decremented first and then corresponding ring buffer value should be taken from ring cache. But In function xhci_endpoint_init(), the num_rings_cached index is accessed before decrement. virt_dev->eps[ep_index].new_ring = virt_dev->ring_cache[virt_dev->num_rings_cached]; virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; virt_dev->num_rings_cached--; This is bug in manipulating the index of ring cache. And it should be as below: virt_dev->num_rings_cached--; virt_dev->eps[ep_index].new_ring = virt_dev->ring_cache[virt_dev->num_rings_cached]; virt_dev->ring_cache[virt_dev->num_rings_cached] = NULL; Cc: <stable@vger.kernel.org> Signed-off-by: Aman Deep <aman.deep@samsung.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: Workaround to get D3 working in Intel xHCIRajmohan Mani2015-07-221-3/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The xHCI in Intel CherryView / Braswell Platform requires a driver workaround to get xHCI D3 working. Without this workaround, xHCI might not enter D3. Workaround is to configure SSIC PORT as "unused" before D3 entry and "used" after D3 exit. This is done through a vendor specific register (PORT2_SSIC_CONFIG_REG2 at offset 0x883c), in xhci suspend / resume callbacks. Verified xHCI D3 works fine in CherryView / Braswell platform. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * xhci: call BIOS workaround to enable runtime suspend on Intel BraswellMathias Nyman2015-07-221-0/+17
| | | | | | | | | | | | | | | | | | Intel xhci hw that require XHCI_PME_STUCK quirk have as default disabled xhci from going to D3 state in runtime suspend. Driver needs to verify it can deal with the hw by calling an ACPI _DSM method to get D3 enabled. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | drivers: usb: fsl: Define usb control register mask for w1c bitsNikhil Badola2015-07-232-9/+17
| | | | | | | | | | | | | | | | | | Define and use CONTROL_REGISTER_W1C_MASK to make sure that w1c bits of usb control register do not get reset while writing any other bit Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | drivers: usb: fsl: Modify phy clk valid bit checkingNikhil Badola2015-07-232-8/+17
| | | | | | | | | | | | | | | | | | Phy_clk_valid bit is checked only when the boolean property phy-clk-valid in present in usb node device tree. This property is added to the usb node via device tree fixup. Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | drivers:usb:fsl: Introduce FSL_USB2_PHY_UTMI_DUAL macroNikhil Badola2015-07-232-0/+3
| | | | | | | | | | | | | | | | | | Introduce FSL_USB2_PHY_UTMI_DUAL macro for setting phy mode in SOCs such has T4240, T1040, T2080 which have utmi dual-phy Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | drivers: usb :fsl: Implement Workaround for USB Erratum A007792Nikhil Badola2015-07-232-0/+15
| | | | | | | | | | | | | | | | | | | | | | USB controller version-2.5 requires to enable internal UTMI phy and program PTS field in PORTSC register before asserting controller reset. This is must for successful resetting of the controller and subsequent enumeration of usb devices Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Suresh Gupta <suresh.gupta@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | drivers:usb:fsl: Replace macros with enumerated typeNikhil Badola2015-07-231-4/+4
| | | | | | | | | | | | | | | | Replace macros with enumerated type to represent usb ip controller version Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: bcma: add support for controlling bus power through GPIOHauke Mehrtens2015-07-231-0/+24
| | | | | | | | | | | | | | | | | | On some boards a GPIO is needed to activate USB controller. Make it possible to specify such a GPIO in device tree. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: bcma: add bcm53xx supportHauke Mehrtens2015-07-231-3/+78
| | | | | | | | | | | | | | | | | | | | The Broadcom ARM SoCs with this usb core need a different initialization and they have a different core id. This patch adds support for these USB 2.0 core. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: bcma: fix error handling in bcma_hcd_create_pdev()Hauke Mehrtens2015-07-231-2/+2
| | | | | | | | | | | | | | | | This patch makes bcma_hcd_create_pdev() not return NULL, but a prober error code in case of an error. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: bcma: use devm_kzallocHauke Mehrtens2015-07-231-7/+4
| | | | | | | | | | | | | | | | Instead of manually handling the frees use devm. There was also a free missing in the unregister call which is not needed with devm. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: bcma: replace numbers with constantsHauke Mehrtens2015-07-231-1/+2
| | | | | | | | | | | | | | The constants for these numbers were added long time ago, use them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: bcma: remove chip id checkHauke Mehrtens2015-07-231-5/+0
| | | | | | | | | | | | | | | | | | | | I have never seen any bcma device with an USB host core which was not a SoC, the bcma devices have an USB device core with a different core id. Some SoC have IDs with 47XX and 53XX in decimal form which would be rejected by this check. Instead of fixing this check just remove it. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: host: xhci: remove typo in function documentationLuis de Bethencourt2015-07-221-1/+1
|/ | | | | | | Fix "though" to "through" in documentation of xhci_alloc_streams(). Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2015-06-271-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull MIPS updates from Ralf Baechle: - Improvements to the tlb_dump code - KVM fixes - Add support for appended DTB - Minor improvements to the R12000 support - Minor improvements to the R12000 support - Various platform improvments for BCM47xx - The usual pile of minor cleanups - A number of BPF fixes and improvments - Some improvments to the support for R3000 and DECstations - Some improvments to the ATH79 platform support - A major patchset for the JZ4740 SOC adding support for the CI20 platform - Add support for the Pistachio SOC - Minor BMIPS/BCM63xx platform support improvments. - Avoid "SYNC 0" as memory barrier when unlocking spinlocks - Add support for the XWR-1750 board. - Paul's __cpuinit/__cpuinitdata cleanups. - New Malta CPU board support large memory so enable ZONE_DMA32. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (131 commits) MIPS: spinlock: Adjust arch_spin_lock back-off time MIPS: asmmacro: Ensure 64-bit FP registers are used with MSA MIPS: BCM47xx: Simplify handling SPROM revisions MIPS: Cobalt Don't use module_init in non-modular MTD registration. MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/ MIPS: use for_each_sg() MIPS: BCM47xx: Don't select BCMA_HOST_PCI MIPS: BCM47xx: Add helper variable for storing NVRAM length MIPS: IRQ/IP27: Move IRQ allocation API to platform code. MIPS: Replace smp_mb with release barrier function in unlocks. MIPS: i8259: DT support MIPS: Malta: Basic DT plumbing MIPS: include errno.h for ENODEV in mips-cm.h MIPS: Define GCR_GIC_STATUS register fields MIPS: BPF: Introduce BPF ASM helpers MIPS: BPF: Use BPF register names to describe the ABI MIPS: BPF: Move register definition to the BPF header MIPS: net: BPF: Replace RSIZE with SZREG MIPS: BPF: Free up some callee-saved registers MIPS: Xtalk: Update xwidget.h with known Xtalk device numbers ...
| * MIPS: Octeon: Set OHCI and EHCI MMIO byte order to match CPUBen Hutchings2015-06-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Octeon OHCI is now supported by the ohci-platform driver, and USB_OCTEON_OHCI is marked as deprecated. However, it is currently still necessary to enable it in order to select USB_OHCI_BIG_ENDIAN_MMIO. Make CPU_CAVIUM_OCTEON select that as well, so that USB_OCTEON_OHCI is really obsolete. The old ohci-octeon and ehci-octeon drivers also only enabled big-endian MMIO in case the CPU was big-endian. Make the selections of USB_EHCI_BIG_ENDIAN_MMIO and USB_OHCI_BIG_ENDIAN_MMIO conditional, to match this. Fixes: 2193dda5eec6 ("USB: host: Remove ehci-octeon and ohci-octeon drivers") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: linux-mips@linux-mips.org Cc: David Daney <david.daney@cavium.com> Cc: Chandrakala Chavva <cchavva@caviumnetworks.com> Cc: Paul Martin <paul.martin@codethink.co.uk> Patchwork: https://patchwork.linux-mips.org/patch/10178/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 02:52:53 +0100