summaryrefslogtreecommitdiffstats
path: root/drivers/usb/mtu3 (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: mtu3: fix USB 3.0 dual-role-switch from device to hostMacpaul Lin2022-04-211-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Issue description: When an OTG port has been switched to device role and then switch back to host role again, the USB 3.0 Host (XHCI) will not be able to detect "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed) devices until system reboot. Root cause and Solution: There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in toggle_opstate(). At the end of role switch procedure, toggle_opstate() will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN will be skipped hence caused the port cannot detect connected USB 2.0 (Highspeed and Fullspeed) devices. Simply remove the condition check to solve this issue. Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Cc: stable@vger.kernel.org Tested-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Tainping Fang <tianping.fang@mediatek.com> Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: set interval of FS intr and isoc endpointChunfeng Yun2021-12-211-0/+7
| | | | | | | | | | Add support to set interval also for FS intr and isoc endpoint. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218095749.6250-4-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix list_head check warningChunfeng Yun2021-12-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is caused by uninitialization of list_head. BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4 Call trace: dump_backtrace+0x0/0x298 show_stack+0x24/0x34 dump_stack+0x130/0x1a8 print_address_description+0x88/0x56c __kasan_report+0x1b8/0x2a0 kasan_report+0x14/0x20 __asan_load8+0x9c/0xa0 __list_del_entry_valid+0x34/0xe4 mtu3_req_complete+0x4c/0x300 [mtu3] mtu3_gadget_stop+0x168/0x448 [mtu3] usb_gadget_unregister_driver+0x204/0x3a0 unregister_gadget_item+0x44/0xa4 Fixes: 83374e035b62 ("usb: mtu3: add tracepoints to help debug") Cc: stable@vger.kernel.org Reported-by: Yuwen Ng <yuwen.ng@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218095749.6250-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add memory barrier before set GPD's HWOChunfeng Yun2021-12-211-1/+6
| | | | | | | | | | | | | | | There is a seldom issue that the controller access invalid address and trigger devapc or emimpu violation. That is due to memory access is out of order and cause gpd data is not correct. Add mb() to prohibit compiler or cpu from reordering to make sure GPD is fully written before setting its HWO. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Cc: stable@vger.kernel.org Reported-by: Eddie Hung <eddie.hung@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218095749.6250-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix interval value for intr and isocChunfeng Yun2021-12-211-2/+2
| | | | | | | | | | | Use the Interval value from isoc/intr endpoint descriptor, no need minus one. The original code doesn't cause transfer error for normal cases, but it may have side effect with respond time of ERDY or tPingTimeout. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: enable wake-up interrupt after runtime_suspend calledChunfeng Yun2021-10-271-1/+1
| | | | | | | | | Use the new API dev_pm_set_dedicated_wake_irq_reverse() to request dedicated wake-up interrupt, due to we want to enable the wake IRQ after running ->runtime_suspend(). Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* usb: mtu3: fix random remote wakeupChunfeng Yun2021-08-262-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | Some platforms, e.g. 8183/8192, use low level latch way to keep wakeup signal, it may latch a wrong signal if debounce more time, and enable wakeup earlier. ____________________ ip_sleep ____/ \__________ ___________________ wakeup_signal ____________/ \______ _______________________________ wakeup_en _______/ ^ ^ |(1) |(2) latch wakeup_signal mistakenly at (1), should latch it at (2); Workaround: delay about 100us to enable wakeup, meanwhile decrease debounce time. Fixes: b1a344589eea ("usb: mtu3: support ip-sleep wakeup for MT8183") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210826083637.33237-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: return successful suspend statusChunfeng Yun2021-08-261-0/+1
| | | | | | | | | | Forgot 'return 0;' when suspend successfully, make the mistake when I split patches. Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210826083637.33237-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix the wrong HS mult valueChunfeng Yun2021-08-131-4/+2
| | | | | | | | | | | | usb_endpoint_maxp() returns actual max packet size, @mult will always be zero, fix it by using usb_endpoint_maxp_mult() instead to get mult. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1628836253-7432-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use @mult for HS isoc or intrChunfeng Yun2021-08-131-1/+1
| | | | | | | | | | | For HS isoc or intr, should use @mult but not @burst to save mult value. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1628836253-7432-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: restore HS function when set SS/SSPChunfeng Yun2021-08-131-1/+3
| | | | | | | | | | | Due to HS function is disabled when set as FS, need restore it when set as SS/SSP. Fixes: dc4c1aa7eae9 ("usb: mtu3: add ->udc_set_speed()") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1628836253-7432-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support suspend/resume for dual-role modeChunfeng Yun2021-07-275-47/+89
| | | | | | | | | | | Support suspend/resume for dual-role mode including the single port and multi-ports supported by host controller, when the host supports mult-ports, only port0 (u2/u3) is used to support dual role mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-14-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support suspend/resume for device modeChunfeng Yun2021-07-275-14/+121
| | | | | | | | | Support suspend/resume for device mode if the device is not connected with a host, otherwise reject to suspend. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-13-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add helper to power on/down deviceChunfeng Yun2021-07-271-12/+24
| | | | | | | | | Add helper to power on/down device ports and ip, it will be used when support device suspend/resume Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support runtime PM for host modeChunfeng Yun2021-07-273-9/+69
| | | | | | | | | | Use a dedicated wakeup irq for runtime suspend/resume, and interrupts names are provided if using wakeup irq, this patch only support host mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add new helpers for host suspend/resumeChunfeng Yun2021-07-273-16/+88
| | | | | | | | | Extract two helpers for host suspend and resume, will make it easy to support dual-role mode suspend/resume later. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support option to disable usb2 portsChunfeng Yun2021-07-273-3/+20
| | | | | | | | | | Add support to disable specific usb2 host ports, it's useful when a usb2 port is disabled on some platforms, but enabled on others for the same SoC. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support property role-switch-default-modeChunfeng Yun2021-07-272-4/+22
| | | | | | | | Support default mode config when use usb-role-switch Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use clock bulk to get clocksChunfeng Yun2021-06-152-80/+18
| | | | | | | | | Use clock bulk helpers to get/enable/disable clocks, meanwhile make sys_ck optional, then will be easier to handle clocks. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-24-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: rebuild role switch get/set hooksChunfeng Yun2021-06-151-10/+3
| | | | | | | | | | Use common helper ssusb_set_mode() to do role switch instead of manual switch helper; Remove unnecessary local variable when get role status Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-14-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use force mode for dual role switchChunfeng Yun2021-06-152-12/+4
| | | | | | | | | Force IDDIG status for all three ways of dual role switch, this is needed when use Type-C to switch mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-13-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add helper to get pointer of ssusb_mtk structChunfeng Yun2021-06-151-10/+10
| | | | | | | | | Add a helper to get pointer of ssusb_mtk struct from the pointer of otg_switch_mtk struct. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: rebuild role switch flow of extconChunfeng Yun2021-06-152-32/+38
| | | | | | | | | This is a preparation patch to plan to use the same work to handle role switch for all three supported ways. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use enum usb_role instead of private defined onesChunfeng Yun2021-06-151-37/+15
| | | | | | | | | | Now we mainly use usb-role-switch to set dual role mode, and all three ways supported use the same function to switch mode, use usb_role enum will make code clear Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: drop support vbus detectionChunfeng Yun2021-06-152-55/+2
| | | | | | | | | Until now it's never used on any platform, and will not used later. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: remove wakelockChunfeng Yun2021-06-151-3/+0
| | | | | | | | Prefer to use /sys/power/wake_lock instead. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: power down port when power down device IPChunfeng Yun2021-06-151-0/+9
| | | | | | | | | | When power down device IP, we can also power down device port, then power on the port again when power on device ip, it's helpful to make device ip enter ip sleep mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: power down device IP by defaultChunfeng Yun2021-06-151-4/+3
| | | | | | | | Power down device IP by default until @udc_start is called. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: skip getting extcon when use manual drd switchChunfeng Yun2021-06-031-1/+4
| | | | | | | | | When use manual drd switch, extcon is not used in fact, so no need get it even it exists, just skip it like using role switch. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use dev_err_probe to print error log about extconChunfeng Yun2021-06-031-2/+2
| | | | | | | | Print an error log when the error number is not -EPROBE_DEFER Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: dump a status register of IPPCChunfeng Yun2021-06-031-0/+1
| | | | | | | | Add a SSUSB_IP_PW_STS1 register to show ip sleep status Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: remove repeated setting of speedChunfeng Yun2021-06-033-3/+2
| | | | | | | | | mtu3_gadget_start() will set speed, no need set it again in mtu3_gadget_set_speed(), just save the desired speed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: remove mtu3_ep0_setup() declaration in mtu3.hChunfeng Yun2021-06-032-2/+1
| | | | | | | | | It's defined and only used in the same file, so remove its declaration in mtu3.h, and make it static Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: drop CONFIG_OFChunfeng Yun2021-03-261-6/+1
| | | | | | | | | The driver can match only the devices created by the OF core via the DT table, so the table should be always used. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add support ip-sleep wakeup for MT8192Chunfeng Yun2021-03-261-0/+10
| | | | | | | | | Add add support ip-sleep wakeup for MT8192, it's a specific revision, not following IPM rule. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support ip-sleep wakeup for MT8183Chunfeng Yun2021-03-261-0/+12
| | | | | | | | | | | | | Add support ip-sleep wakeup for MT8183, it's similar to MT8173, and it's also a specific one, but not following IPM rule. Due to the index 2 already used by many DTS, it's better to keep it unchanged for backward compatibility, treat specific ones without following IPM rule as revision 1.x, meanwhile reserve 3~10 for later revision that follows the IPM rule. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: Fix spelling mistake "disabed" -> "disabled"Colin Ian King2021-03-181-4/+4
| | | | | | | | | | The variable u3_ports_disabed contains a spelling mistake, rename it to u3_ports_disabled. Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210311092529.4898-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix memory corruption in mtu3_debugfs_regset()Dan Carpenter2020-12-071-1/+1
| | | | | | | | | | | | This code is using the wrong sizeof() so it does not allocate enough memory. It allocates 32 bytes but 72 are required. That will lead to memory corruption. Fixes: ae07809255d3 ("usb: mtu3: add debugfs interface files") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8ikqc4Mo2/0G72j@mwanda Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: mtu3_debug: remove an unused struct memberDan Carpenter2020-12-041-1/+0
| | | | | | | | | | The "nregs" member is not used. The code uses the "regset.nregs" struct member instead. Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8ikv1QA3Do50D+R@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix panic in mtu3_gadget_stop()Macpaul Lin2020-11-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a possible issue when mtu3_gadget_stop() already assigned NULL to mtu->gadget_driver during mtu_gadget_disconnect(). [<ffffff9008161974>] notifier_call_chain+0xa4/0x128 [<ffffff9008161fd4>] __atomic_notifier_call_chain+0x84/0x138 [<ffffff9008162ec0>] notify_die+0xb0/0x120 [<ffffff900809e340>] die+0x1f8/0x5d0 [<ffffff90080d03b4>] __do_kernel_fault+0x19c/0x280 [<ffffff90080d04dc>] do_bad_area+0x44/0x140 [<ffffff90080d0f9c>] do_translation_fault+0x4c/0x90 [<ffffff9008080a78>] do_mem_abort+0xb8/0x258 [<ffffff90080849d0>] el1_da+0x24/0x3c [<ffffff9009bde01c>] mtu3_gadget_disconnect+0xac/0x128 [<ffffff9009bd576c>] mtu3_irq+0x34c/0xc18 [<ffffff90082ac03c>] __handle_irq_event_percpu+0x2ac/0xcd0 [<ffffff90082acae0>] handle_irq_event_percpu+0x80/0x138 [<ffffff90082acc44>] handle_irq_event+0xac/0x148 [<ffffff90082b71cc>] handle_fasteoi_irq+0x234/0x568 [<ffffff90082a8708>] generic_handle_irq+0x48/0x68 [<ffffff90082a96ac>] __handle_domain_irq+0x264/0x1740 [<ffffff90080819f4>] gic_handle_irq+0x14c/0x250 [<ffffff9008084cec>] el1_irq+0xec/0x194 [<ffffff90085b985c>] dma_pool_alloc+0x6e4/0xae0 [<ffffff9008d7f890>] cmdq_mbox_pool_alloc_impl+0xb0/0x238 [<ffffff9008d80904>] cmdq_pkt_alloc_buf+0x2dc/0x7c0 [<ffffff9008d80f60>] cmdq_pkt_add_cmd_buffer+0x178/0x270 [<ffffff9008d82320>] cmdq_pkt_perf_begin+0x108/0x148 [<ffffff9008d824d8>] cmdq_pkt_create+0x178/0x1f0 [<ffffff9008f96230>] mtk_crtc_config_default_path+0x328/0x7a0 [<ffffff90090246cc>] mtk_drm_idlemgr_kick+0xa6c/0x1460 [<ffffff9008f9bbb4>] mtk_drm_crtc_atomic_begin+0x1a4/0x1a68 [<ffffff9008e8df9c>] drm_atomic_helper_commit_planes+0x154/0x878 [<ffffff9008f2fb70>] mtk_atomic_complete.isra.16+0xe80/0x19c8 [<ffffff9008f30910>] mtk_atomic_commit+0x258/0x898 [<ffffff9008ef142c>] drm_atomic_commit+0xcc/0x108 [<ffffff9008ef7cf0>] drm_mode_atomic_ioctl+0x1c20/0x2580 [<ffffff9008ebc768>] drm_ioctl_kernel+0x118/0x1b0 [<ffffff9008ebcde8>] drm_ioctl+0x5c0/0x920 [<ffffff900863b030>] do_vfs_ioctl+0x188/0x1820 [<ffffff900863c754>] SyS_ioctl+0x8c/0xa0 Fixes: df2069acb005 ("usb: Add MediaTek USB3 DRD driver") Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1604642069-20961-1-git-send-email-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: Remove unsused inline function is_first_entryYueHaibing2020-08-181-6/+0
| | | | | | | | It is never used, so can be removed. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200731082008.33016-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: simplify mtu3_req_complete()Chunfeng Yun2020-07-291-10/+7
| | | | | | | | | Use argument req directly instead of mreq->request, they are the same usb request. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: clear dual mode of u3port when disable deviceChunfeng Yun2020-07-291-1/+5
| | | | | | | | | If not clear u3port's dual mode when disable device, the IP will fail to enter sleep mode when suspend. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use MTU3_EP_WEDGE flagChunfeng Yun2020-07-293-7/+5
| | | | | | | | | Use MTU3_EP_WEDGE flag instead of the member @wedged in mtu3_ep struct, then @wedged can be removed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: remove useless member @busy in mtu3_ep structChunfeng Yun2020-07-292-7/+0
| | | | | | | | The member @busy in mtu3_ep struct is unnecessary, so remove it. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: remove repeated error logChunfeng Yun2020-07-291-7/+1
| | | | | | | | The caller already print error log. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add ->udc_set_speed()Chunfeng Yun2020-07-293-28/+58
| | | | | | | | | Make use of the method to make sure connect on speeds supported by the gadget driver. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: introduce a funtion to check maximum speedChunfeng Yun2020-07-291-20/+28
| | | | | | | | | | The max_speed got from DTS may be not supported by the hardware, so need check it, and assign a proper default value. And make it clear by introducing a funtion. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: clear interrupts status when disable interruptsChunfeng Yun2020-07-291-13/+12
| | | | | | | | | | When disable interrupts, will also want to clear their status, ensure it by calling mtu3_intr_status_clear() in mtu3_intr_disable(). Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: reinitialize CSR registersChunfeng Yun2020-07-291-29/+32
| | | | | | | | | | The CSR registers will be reset as default value if the ports are disabled, so reinitialize them when the ports are enabled again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1595834101-13094-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-21 01:22:51 +0100