summaryrefslogtreecommitdiffstats
path: root/drivers/usb/mtu3 (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: mtu3: fix the failure of qmu stopChunfeng Yun2023-01-193-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | This happens when do stress test of uvc stream on/off which will enable/disable endpoints. uvc has four tx requests, and may disable endpoint between queue tx requests as following: enable ep --> start qmu queue tx request0 queue tx request1 queue tx request2 --> resume qmu disable ep --> stop qmu may fail [1] queue tx request3 --> will resume qmu, may cause qmu can't work when enable ep next time [2] [1]: when the tx fifo has some data to transmit, and try to stop qmu (stop ep) meanwhile resume qmu (queue tx request), it may cause stop qmu timeout, then can be fixed by flushing fifo when stop qmu. [2]: it resumes qmu again, shall stop qmu again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reported-by: Min Guo <min.guo@mediatek.com> Link: https://lore.kernel.org/r/20230119033322.21426-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix failed runtime suspend in host only modeChunfeng Yun2022-09-302-2/+2
| | | | | | | | | | | | | | When the dr_mode is "host", after the host enter runtime suspend, the mtu3 can't do it, because the mtu3's device wakeup function is not enabled, instead it's enabled in gadget init function, to fix the issue, init wakeup early in mtu3's probe() Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reported-by: Tianping Fang <tianping.fang@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220929064459.32522-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'trace-v6.0' of ↵Linus Torvalds2022-08-051-4/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: - Runtime verification infrastructure This is the biggest change here. It introduces the runtime verification that is necessary for running Linux on safety critical systems. It allows for deterministic automata models to be inserted into the kernel that will attach to tracepoints, where the information on these tracepoints will move the model from state to state. If a state is encountered that does not belong to the model, it will then activate a given reactor, that could just inform the user or even panic the kernel (for which safety critical systems will detect and can recover from). - Two monitor models are also added: Wakeup In Preemptive (WIP - not to be confused with "work in progress"), and Wakeup While Not Running (WWNR). - Added __vstring() helper to the TRACE_EVENT() macro to replace several vsnprintf() usages that were all doing it wrong. - eprobes now can have their event autogenerated when the event name is left off. - The rest is various cleanups and fixes. * tag 'trace-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (50 commits) rv: Unlock on error path in rv_unregister_reactor() tracing: Use alignof__(struct {type b;}) instead of offsetof() tracing/eprobe: Show syntax error logs in error_log file scripts/tracing: Fix typo 'the the' in comment tracepoints: It is CONFIG_TRACEPOINTS not CONFIG_TRACEPOINT tracing: Use free_trace_buffer() in allocate_trace_buffers() tracing: Use a struct alignof to determine trace event field alignment rv/reactor: Add the panic reactor rv/reactor: Add the printk reactor rv/monitor: Add the wwnr monitor rv/monitor: Add the wip monitor rv/monitor: Add the wip monitor skeleton created by dot2k Documentation/rv: Add deterministic automata instrumentation documentation Documentation/rv: Add deterministic automata monitor synthesis documentation tools/rv: Add dot2k Documentation/rv: Add deterministic automaton documentation tools/rv: Add dot2c Documentation/rv: Add a basic documentation rv/include: Add instrumentation helper functions rv/include: Add deterministic automata monitor definition via C macros ...
| * USB: mtu3: tracing: Use the new __vstring() helperSteven Rostedt (Google)2022-07-251-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of open coding a __dynamic_array() with a fixed length (which defeats the purpose of the dynamic array in the first place). Use the new __vstring() helper that will use a va_list and only write enough of the string into the ring buffer that is needed. Link: https://lkml.kernel.org/r/20220719112719.17e796c6@gandalf.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-usb@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
* | usb: mtu3: support function remote wakeupChunfeng Yun2022-07-083-4/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add function wake notification to support function remote wakeup, currently assume the composite device only enable function wake for the first interface. Forward request to function driver when the recipient is an interface, including: GetStatus() request to the first interface in a function returns the information about 'function remote wakeup' and 'function remote wakeup capalbe'; SetFeature request of FUNCTION_SUSPEND to an interface recipient, the controller driver saves the suspend option; Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220708071903.25752-5-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: mtu3: check capability of usb3 dual roleChunfeng Yun2022-07-081-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | It is capable of supporting usb3 dual role if there is at least one usb3 port for device and xhci controller, we can check it from the controller's capability, so no need the property "mediatek,usb3-drd" anymore, but I find the property is not decribed in dt-binding. Meanwhile, also take into account if the u3 port is disabled when the u3 phy is shared with pcie. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220708071903.25752-4-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: mtu3: add feature to disable device's usb3 portChunfeng Yun2022-07-083-16/+24
| | | | | | | | | | | | | | | | | | | | | | | | We may want to disable device's usb3 port when the combo phy is switched from usb3 mode to pcie mode for some projects. Meanwhile rename member @is_u3_ip to @u3_capable to avoid misleading, due to the member's value may be changed when disable usb3 port, but the controller is still a usb3 IP which also tells us how to manage the fifo. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220708071903.25752-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: mtu3: print endpoint type as stringChunfeng Yun2022-07-082-6/+6
| | | | | | | | | | | | | | | | | | Print endpoint type as string instead of decimal value to make the log more readable. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220708071903.25752-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: mtu3: register mtu3_irq by threaded irqChunfeng Yun2022-06-101-1/+2
| | | | | | | | | | | | | | | | Use threaded irq to improve time consuming top-half Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220609074233.15532-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: mtu3: implement udc_async_callbacks of gadget operationChunfeng Yun2022-06-103-4/+18
| | | | | | | | | | | | | | | | | | | | Implement udc_async_callbacks hook function to avoid a race when unnbinding gadget drivers, refer to: 7dc0c55e9f30 ('USB: UDC core: Add udc_async_callbacks gadget op') Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220609074233.15532-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: mtu3: sync interrupt before unbind the udcChunfeng Yun2022-06-101-0/+1
| | | | | | | | | | | | | | | | | | | | Register gadget irq to avoid the interrupt handler is occurred or scheduled during the unbind flow, may happen when do android function switch stress test. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220609074233.15532-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: mtu3: add support controller resetChunfeng Yun2022-06-101-0/+7
|/ | | | | | | | | | | Add support controller reset via a reset-controller usually in infracfg, it's different with the software reset by IPPC which only used to reset MAC, and it will also reset IPPC meanwhile. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20220523090449.14430-4-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix USB 3.0 dual-role-switch from device to hostMacpaul Lin2022-04-211-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Issue description: When an OTG port has been switched to device role and then switch back to host role again, the USB 3.0 Host (XHCI) will not be able to detect "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed) devices until system reboot. Root cause and Solution: There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in toggle_opstate(). At the end of role switch procedure, toggle_opstate() will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN will be skipped hence caused the port cannot detect connected USB 2.0 (Highspeed and Fullspeed) devices. Simply remove the condition check to solve this issue. Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Cc: stable@vger.kernel.org Tested-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Tainping Fang <tianping.fang@mediatek.com> Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: set interval of FS intr and isoc endpointChunfeng Yun2021-12-211-0/+7
| | | | | | | | | | Add support to set interval also for FS intr and isoc endpoint. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218095749.6250-4-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix list_head check warningChunfeng Yun2021-12-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is caused by uninitialization of list_head. BUG: KASAN: use-after-free in __list_del_entry_valid+0x34/0xe4 Call trace: dump_backtrace+0x0/0x298 show_stack+0x24/0x34 dump_stack+0x130/0x1a8 print_address_description+0x88/0x56c __kasan_report+0x1b8/0x2a0 kasan_report+0x14/0x20 __asan_load8+0x9c/0xa0 __list_del_entry_valid+0x34/0xe4 mtu3_req_complete+0x4c/0x300 [mtu3] mtu3_gadget_stop+0x168/0x448 [mtu3] usb_gadget_unregister_driver+0x204/0x3a0 unregister_gadget_item+0x44/0xa4 Fixes: 83374e035b62 ("usb: mtu3: add tracepoints to help debug") Cc: stable@vger.kernel.org Reported-by: Yuwen Ng <yuwen.ng@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218095749.6250-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add memory barrier before set GPD's HWOChunfeng Yun2021-12-211-1/+6
| | | | | | | | | | | | | | | There is a seldom issue that the controller access invalid address and trigger devapc or emimpu violation. That is due to memory access is out of order and cause gpd data is not correct. Add mb() to prohibit compiler or cpu from reordering to make sure GPD is fully written before setting its HWO. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Cc: stable@vger.kernel.org Reported-by: Eddie Hung <eddie.hung@mediatek.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218095749.6250-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix interval value for intr and isocChunfeng Yun2021-12-211-2/+2
| | | | | | | | | | | Use the Interval value from isoc/intr endpoint descriptor, no need minus one. The original code doesn't cause transfer error for normal cases, but it may have side effect with respond time of ERDY or tPingTimeout. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20211218095749.6250-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: enable wake-up interrupt after runtime_suspend calledChunfeng Yun2021-10-271-1/+1
| | | | | | | | | Use the new API dev_pm_set_dedicated_wake_irq_reverse() to request dedicated wake-up interrupt, due to we want to enable the wake IRQ after running ->runtime_suspend(). Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* usb: mtu3: fix random remote wakeupChunfeng Yun2021-08-262-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | Some platforms, e.g. 8183/8192, use low level latch way to keep wakeup signal, it may latch a wrong signal if debounce more time, and enable wakeup earlier. ____________________ ip_sleep ____/ \__________ ___________________ wakeup_signal ____________/ \______ _______________________________ wakeup_en _______/ ^ ^ |(1) |(2) latch wakeup_signal mistakenly at (1), should latch it at (2); Workaround: delay about 100us to enable wakeup, meanwhile decrease debounce time. Fixes: b1a344589eea ("usb: mtu3: support ip-sleep wakeup for MT8183") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210826083637.33237-2-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: return successful suspend statusChunfeng Yun2021-08-261-0/+1
| | | | | | | | | | Forgot 'return 0;' when suspend successfully, make the mistake when I split patches. Fixes: 6b587394c65c ("usb: mtu3: support suspend/resume for dual-role mode") Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/20210826083637.33237-1-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix the wrong HS mult valueChunfeng Yun2021-08-131-4/+2
| | | | | | | | | | | | usb_endpoint_maxp() returns actual max packet size, @mult will always be zero, fix it by using usb_endpoint_maxp_mult() instead to get mult. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1628836253-7432-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use @mult for HS isoc or intrChunfeng Yun2021-08-131-1/+1
| | | | | | | | | | | For HS isoc or intr, should use @mult but not @burst to save mult value. Fixes: 4d79e042ed8b ("usb: mtu3: add support for usb3.1 IP") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1628836253-7432-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: restore HS function when set SS/SSPChunfeng Yun2021-08-131-1/+3
| | | | | | | | | | | Due to HS function is disabled when set as FS, need restore it when set as SS/SSP. Fixes: dc4c1aa7eae9 ("usb: mtu3: add ->udc_set_speed()") Cc: stable@vger.kernel.org Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1628836253-7432-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support suspend/resume for dual-role modeChunfeng Yun2021-07-275-47/+89
| | | | | | | | | | | Support suspend/resume for dual-role mode including the single port and multi-ports supported by host controller, when the host supports mult-ports, only port0 (u2/u3) is used to support dual role mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-14-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support suspend/resume for device modeChunfeng Yun2021-07-275-14/+121
| | | | | | | | | Support suspend/resume for device mode if the device is not connected with a host, otherwise reject to suspend. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-13-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add helper to power on/down deviceChunfeng Yun2021-07-271-12/+24
| | | | | | | | | Add helper to power on/down device ports and ip, it will be used when support device suspend/resume Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support runtime PM for host modeChunfeng Yun2021-07-273-9/+69
| | | | | | | | | | Use a dedicated wakeup irq for runtime suspend/resume, and interrupts names are provided if using wakeup irq, this patch only support host mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add new helpers for host suspend/resumeChunfeng Yun2021-07-273-16/+88
| | | | | | | | | Extract two helpers for host suspend and resume, will make it easy to support dual-role mode suspend/resume later. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support option to disable usb2 portsChunfeng Yun2021-07-273-3/+20
| | | | | | | | | | Add support to disable specific usb2 host ports, it's useful when a usb2 port is disabled on some platforms, but enabled on others for the same SoC. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support property role-switch-default-modeChunfeng Yun2021-07-272-4/+22
| | | | | | | | Support default mode config when use usb-role-switch Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1626340078-29111-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use clock bulk to get clocksChunfeng Yun2021-06-152-80/+18
| | | | | | | | | Use clock bulk helpers to get/enable/disable clocks, meanwhile make sys_ck optional, then will be easier to handle clocks. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-24-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: rebuild role switch get/set hooksChunfeng Yun2021-06-151-10/+3
| | | | | | | | | | Use common helper ssusb_set_mode() to do role switch instead of manual switch helper; Remove unnecessary local variable when get role status Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-14-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use force mode for dual role switchChunfeng Yun2021-06-152-12/+4
| | | | | | | | | Force IDDIG status for all three ways of dual role switch, this is needed when use Type-C to switch mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-13-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add helper to get pointer of ssusb_mtk structChunfeng Yun2021-06-151-10/+10
| | | | | | | | | Add a helper to get pointer of ssusb_mtk struct from the pointer of otg_switch_mtk struct. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: rebuild role switch flow of extconChunfeng Yun2021-06-152-32/+38
| | | | | | | | | This is a preparation patch to plan to use the same work to handle role switch for all three supported ways. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use enum usb_role instead of private defined onesChunfeng Yun2021-06-151-37/+15
| | | | | | | | | | Now we mainly use usb-role-switch to set dual role mode, and all three ways supported use the same function to switch mode, use usb_role enum will make code clear Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: drop support vbus detectionChunfeng Yun2021-06-152-55/+2
| | | | | | | | | Until now it's never used on any platform, and will not used later. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-9-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: remove wakelockChunfeng Yun2021-06-151-3/+0
| | | | | | | | Prefer to use /sys/power/wake_lock instead. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-8-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: power down port when power down device IPChunfeng Yun2021-06-151-0/+9
| | | | | | | | | | When power down device IP, we can also power down device port, then power on the port again when power on device ip, it's helpful to make device ip enter ip sleep mode. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-7-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: power down device IP by defaultChunfeng Yun2021-06-151-4/+3
| | | | | | | | Power down device IP by default until @udc_start is called. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623139069-8173-6-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: skip getting extcon when use manual drd switchChunfeng Yun2021-06-031-1/+4
| | | | | | | | | When use manual drd switch, extcon is not used in fact, so no need get it even it exists, just skip it like using role switch. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-5-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: use dev_err_probe to print error log about extconChunfeng Yun2021-06-031-2/+2
| | | | | | | | Print an error log when the error number is not -EPROBE_DEFER Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-4-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: dump a status register of IPPCChunfeng Yun2021-06-031-0/+1
| | | | | | | | Add a SSUSB_IP_PW_STS1 register to show ip sleep status Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-3-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: remove repeated setting of speedChunfeng Yun2021-06-033-3/+2
| | | | | | | | | mtu3_gadget_start() will set speed, no need set it again in mtu3_gadget_set_speed(), just save the desired speed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-2-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: remove mtu3_ep0_setup() declaration in mtu3.hChunfeng Yun2021-06-032-2/+1
| | | | | | | | | It's defined and only used in the same file, so remove its declaration in mtu3.h, and make it static Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1622182260-23767-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: drop CONFIG_OFChunfeng Yun2021-03-261-6/+1
| | | | | | | | | The driver can match only the devices created by the OF core via the DT table, so the table should be always used. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-12-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: add support ip-sleep wakeup for MT8192Chunfeng Yun2021-03-261-0/+10
| | | | | | | | | Add add support ip-sleep wakeup for MT8192, it's a specific revision, not following IPM rule. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-11-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: support ip-sleep wakeup for MT8183Chunfeng Yun2021-03-261-0/+12
| | | | | | | | | | | | | Add support ip-sleep wakeup for MT8183, it's similar to MT8173, and it's also a specific one, but not following IPM rule. Due to the index 2 already used by many DTS, it's better to keep it unchanged for backward compatibility, treat specific ones without following IPM rule as revision 1.x, meanwhile reserve 3~10 for later revision that follows the IPM rule. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1616482975-17841-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: Fix spelling mistake "disabed" -> "disabled"Colin Ian King2021-03-181-4/+4
| | | | | | | | | | The variable u3_ports_disabed contains a spelling mistake, rename it to u3_ports_disabled. Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210311092529.4898-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: mtu3: fix memory corruption in mtu3_debugfs_regset()Dan Carpenter2020-12-071-1/+1
| | | | | | | | | | | | This code is using the wrong sizeof() so it does not allocate enough memory. It allocates 32 bytes but 72 are required. That will lead to memory corruption. Fixes: ae07809255d3 ("usb: mtu3: add debugfs interface files") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X8ikqc4Mo2/0G72j@mwanda Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 15:32:08 +0100