summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial/mos7720.c (follow)
Commit message (Collapse)AuthorAgeFilesLines
* USB: serial: mos7720: fix remote wakeupJohan Hovold2019-11-121-4/+0
| | | | | | | | | | | | | | | The driver was setting the device remote-wakeup feature during probe in violation of the USB specification (which says it should only be set just prior to suspending the device). This could potentially waste power during suspend as well as lead to spurious wakeups. Note that USB core would clear the remote-wakeup feature at first resume. Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Cc: stable <stable@vger.kernel.org> # 2.6.19 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: fix mos_parport refcount imbalance on error pathLin Yi2019-03-201-2/+2
| | | | | | | | | | | | | | | The write_parport_reg_nonblock() helper takes a reference to the struct mos_parport, but failed to release it in a couple of error paths after allocation failures, leading to a memory leak. Johan said that move the kref_get() and mos_parport assignment to the end of urbtrack initialisation is a better way, so move it. and mos_parport do not used until urbtrack initialisation. Signed-off-by: Lin Yi <teroincn@163.com> Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> # 2.6.35 Signed-off-by: Johan Hovold <johan@kernel.org>
* mos7720: switch to ->get_serial()Al Viro2018-10-131-21/+13
| | | | | Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* mos7720: bury dead TIOCM... in ->ioctl()Al Viro2018-09-141-52/+0
| | | | | | | | | These ioctls never reach driver's ->ioctl() - tty_ioctl() handles them on its own. ->tiocm[gs]et() is what actually gets called, and mos7720 provides those, with results equivalent to what the unreachable code would be doing when called. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* USB: serial: mos7720: remove redundant variables iflag, mask and serialColin Ian King2018-07-161-9/+0
| | | | | | | | | | | | | Variables iflag, mask and serial are being assigned but are never used hence are redundant and can be removed. Cleans up clang warnings: warning: variable 'iflag' set but not used [-Wunused-but-set-variable] warning: variable 'mask' set but not used [-Wunused-but-set-variable] warning: variable 'serial' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: use irqsave() in USB's complete callbackJohn Ogness2018-06-261-2/+3
| | | | | | | | | | | | | | The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Signed-off-by: John Ogness <john.ogness@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: remove redundant initializations of 'mos_parport'Colin Ian King2018-01-221-2/+2
| | | | | | | | | | | | | | | | The pointer mos_parport is being initialized to pp->private_data and then the assignment is duplicated after a spin lock. Remove the initialization as it occurs before the spin lock and it is a redundant assignment. Cleans up clang warnings: drivers/usb/serial/mos7720.c:521:26: warning: Value stored to 'mos_parport' during its initialization is never read drivers/usb/serial/mos7720.c:557:26: warning: Value stored to 'mos_parport' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: fix module-license macrosJohan Hovold2017-11-041-1/+1
| | | | | | | | Several GPL-2.0 drivers used "GPL" rather than "GPL v2" in their MODULE_LICENSE macros; fix the macros to match the licenses. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: Remove redundant license textGreg Kroah-Hartman2017-11-041-4/+0
| | | | | | | | | | | | | | | | | Now that the SPDX tag is in all USB files, that identifies the license in a specific and legally-defined manner. So the extra GPL text wording can be removed as it is no longer needed at all. This is done on a quest to remove the 700+ different ways that files in the kernel describe the GPL license text. And there's unneeded stuff like the address (sometimes incorrect) for the FSF which is never needed. No copyright headers or other non-license-description text was removed. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman2017-11-041-0/+1
| | | | | | | | | | | | | | | | | | | | | It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: constify static arraysJohan Hovold2017-04-191-1/+1
| | | | | | Declare three immutable static driver arrays as const. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: drop termios-flag debuggingJohan Hovold2017-03-291-11/+0
| | | | | | | | | | | | Drop some unnecessary termios-flag debugging that have been faithfully reproduced in a few old drivers, including the "clfag" typo and all. This also addresses a compiler warning on sparc where tcflag_t is unsigned long and would have required an explicit cast. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: always require an interrupt endpointJohan Hovold2017-03-281-2/+2
| | | | | | | | This driver have treated the interrupt endpoint as optional despite it always being present (according to the datasheet). Let's consider it mandatory instead. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: clean up mcs7715 port setupJohan Hovold2017-03-281-32/+20
| | | | | | | | | | | | Clean up the mcs7715 port setup by using the new endpoint-remap functionality provided by core. Instead of poking around in internal port-structure fields, simply swap the endpoint descriptors of the two ports in calc_num_ports before the port structures are even allocated. Note that we still need to override the default interrupt completion handler. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: allow subdrivers to modify port-endpoint mappingJohan Hovold2017-03-281-1/+2
| | | | | | | | | | | | | | Allow subdrivers to modify the port-endpoint mapping by passing the endpoint descriptors to calc_num_ports. The callback can now also be used to verify that the required endpoints exists and abort probing otherwise. This will allow us to get rid of a few hacks in subdrivers that are already modifying the port-endpoint mapping (or aborting probe due to missing endpoints), but only after the port structures have been setup. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: simplify endpoint checkJohan Hovold2017-03-161-5/+2
| | | | | | | | | | Simplify the endpoint sanity check by letting core verify that the required endpoints are present. Note that the driver expects two bulk-endpoint pairs also for mcs7715 devices for which only one serial port is registered. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: drop unused ASYNC flagsJohan Hovold2017-01-261-1/+0
| | | | | | | | | Do not report ASYNC_SKIP_TEST or ASYNC_AUTO_IRQ as being set in TIOCGSERIAL handlers as these flags are not supported and do not really make any sense for USB serial devices in the first place. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: fix control-message error handlingJohan Hovold2017-01-161-2/+7
| | | | | | | | | | | | Make sure to log an error on short transfers when reading a device register. Also clear the provided buffer (which if often an uninitialised automatic variable) on errors as the driver currently does not bother to check for errors. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: remove obsolete port initialisationJohan Hovold2017-01-041-5/+0
| | | | | | | | | Since commit b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715"), the interrupt urb is no longer submitted at first port open and the endpoint-address initialisation at port-probe is no longer used. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: fix parallel probeJohan Hovold2017-01-041-23/+7
| | | | | | | | | | | | | | | | A static usb-serial-driver structure that is used to initialise the interrupt URB was modified during probe depending on the currently probed device type, something which could break a parallel probe of a device of a different type. Fix this up by overriding the default completion callback for MCS7715 devices in attach() instead. We may want to use two usb-serial driver instances for the two types later. Fixes: fb088e335d78 ("USB: serial: add support for serial port on the moschip 7715") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: fix parport use-after-free on probe errorsJohan Hovold2017-01-041-10/+8
| | | | | | | | | | | | Do not submit the interrupt URB until after the parport has been successfully registered to avoid another use-after-free in the completion handler when accessing the freed parport private data in case of a racing completion. Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: fix use-after-free on probe errorsJohan Hovold2017-01-041-1/+5
| | | | | | | | | | | | | | | | | The interrupt URB was submitted on probe but never stopped on probe errors. This can lead to use-after-free issues in the completion handler when accessing the freed usb-serial struct: Unable to handle kernel paging request at virtual address 6b6b6be7 ... [<bf052e70>] (mos7715_interrupt_callback [mos7720]) from [<c052a894>] (__usb_hcd_giveback_urb+0x80/0x140) [<c052a894>] (__usb_hcd_giveback_urb) from [<c052a9a4>] (usb_hcd_giveback_urb+0x50/0x138) [<c052a9a4>] (usb_hcd_giveback_urb) from [<c0550684>] (musb_giveback+0xc8/0x1cc) Fixes: b69578df7e98 ("USB: usbserial: mos7720: add support for parallel port on moschip 7715") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: fix NULL-deref at openJohan Hovold2017-01-041-0/+5
| | | | | | | | | | | | | | | | Fix NULL-pointer dereference at port open if a device lacks the expected bulk in and out endpoints. Unable to handle kernel NULL pointer dereference at virtual address 00000030 ... [<bf071c20>] (mos7720_open [mos7720]) from [<bf0490e0>] (serial_port_activate+0x68/0x98 [usbserial]) [<bf0490e0>] (serial_port_activate [usbserial]) from [<c0470ca4>] (tty_port_open+0x9c/0xe8) [<c0470ca4>] (tty_port_open) from [<bf049d98>] (serial_open+0x48/0x6c [usbserial]) [<bf049d98>] (serial_open [usbserial]) from [<c0469178>] (tty_open+0xcc/0x5cc) Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver") Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: fix invalid user-pointer checksJohan Hovold2016-11-111-3/+0
| | | | | | | | | Drop invalid user-pointer checks from ioctl handlers. A NULL-pointer can be valid in user space and copy_to_user() takes care of sanity checking. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: mos7720: fix non-atomic allocation in write pathAlexey Khoroshilov2016-08-151-1/+1
| | | | | | | | | | | | | | There is an allocation with GFP_KERNEL flag in mos7720_write(), while it may be called from interrupt context. Follow-up for commit 191252837626 ("USB: kobil_sct: fix non-atomic allocation in write path") Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: mos7720: delete parportSudip Mukherjee2016-06-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | parport subsystem has introduced parport_del_port() to delete a port when it is going away. Without parport_del_port() the registered port will not be unregistered. To reproduce and verify the error: Command to be used is : ls /sys/bus/parport/devices 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and the command still shows "parport0". 4) Attach the device again and we get "parport1". With the patch applied: 1) without the device attached there is no output as there is no registered parport. 2) Attach the device, and the command will show "parport0". 3) Remove the device and there is no output as "parport0" is now removed. 4) Attach device again to get "parport0" again. Cc: <stable@vger.kernel.org> # 4.2+ Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tty: Use termios c_*flag macrosPeter Hurley2016-01-281-2/+2
| | | | | | | | | | | | Expressions of the form "tty->termios.c_*flag & FLAG" are more clearly expressed with the termios flags macros, I_FLAG(), C_FLAG(), O_FLAG(), and L_FLAG(). Convert treewide. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: rename registersSudip Mukherjee2015-07-061-115/+138
| | | | | | | | | | | Some of the register names defined here are matching with registers defined in other places. Like DCR is defined here and DCR is also a register in mn10300 architecture. So when we are building this with mn10300, build fails. To avoid we rename all the registers. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: mos7720: delete some unneeded codeDan Carpenter2014-12-031-4/+0
| | | | | | | | The "status" is uninitialized so this creates a static checker warning. But it's harmless, we can just delete it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: replace unnecessary atomic allocationsJohan Hovold2014-11-031-2/+2
| | | | | | | Use GFP_KERNEL instead of GFP_ATOMIC for allocations in set_termios and port-setting helper which both may and do sleep. Signed-off-by: Johan Hovold <johan@kernel.org>
* USB: serial: add missing newlines to dev_<level> messages.Johan Hovold2014-03-121-6/+6
| | | | | | | | | Add missing newlines to dev_<level> messages. Also make some messages less verbose where appropriate. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
* usb: delete non-required instances of include <linux/init.h>Paul Gortmaker2014-01-091-1/+0
| | | | | | | | | | None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: correct spelling mistakes in commentsRahul Bedarkar2014-01-031-4/+4
| | | | | Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove redundant OOM messagesJohan Hovold2014-01-031-19/+7
| | | | | | | | | Remove redundant error messages on allocation failures, which have already been logged. Cc: Joe Perches <joe@perches.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: clean up ioctl debuggingJohan Hovold2014-01-031-2/+0
| | | | | | | | Remove redundant ioctl debugging from subdrivers. The ioctl request code has already been logged by usb-serial core. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang2013-11-151-1/+1
| | | | | | | | | | | | Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: mos7720: fix big-endian control requestsJohan Hovold2013-08-201-2/+2
| | | | | | | | | | Fix endianess bugs in parallel-port code which caused corrupt control-requests to be issued on big-endian machines. Reported-by: kbuild test robot <fengguang.wu@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: use GFP_ATOMIC under spinlockDan Carpenter2013-08-201-1/+1
| | | | | | | | | | The write_parport_reg_nonblock() function shouldn't sleep because it's called with spinlocks held. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: stable@vger.kernel.org Acked-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: fix broken control requestsJohan Hovold2013-08-141-7/+14
| | | | | | | | | | | The parallel-port code of the drivers used a stack allocated control-request buffer for asynchronous (and possibly deferred) control requests. This not only violates the no-DMA-from-stack requirement but could also lead to corrupt control requests being submitted. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: make minor allocation dynamicGreg Kroah-Hartman2013-06-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | This moves the allocation of minor device numbers from a static array to be dynamic, using the idr interface. This means that you could potentially get "gaps" in a minor number range for a single USB serial device with multiple ports, but all should still work properly. We remove the 'minor' field from the usb_serial structure, as it no longer makes any sense for it (use the field in the usb_serial_port structure if you really want to know this number), and take the fact that we were overloading a number in this field to determine if we had initialized the minor numbers or not, and just use a flag variable instead. Note, we still have the limitation of 255 USB to serial devices in the system, as that is all we are registering with the TTY layer at this point in time. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: ports: add minor and port numberGreg Kroah-Hartman2013-06-101-19/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usb_serial_port structure had the number field, which was the minor number for the port, which almost no one really cared about. They really wanted the number of the port within the device, which you had to subtract from the minor of the parent usb_serial_device structure. To clean this up, provide the real minor number of the port, and the number of the port within the serial device separately, as these numbers might not be related in the future. Bonus is that this cleans up a lot of logic in the drivers, and saves lines overall. Tested-by: Tobias Winter <tobias@linuxdingsda.de> Reviewed-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -- drivers/staging/serqt_usb2/serqt_usb2.c | 21 +++-------- drivers/usb/serial/ark3116.c | 2 - drivers/usb/serial/bus.c | 6 +-- drivers/usb/serial/console.c | 2 - drivers/usb/serial/cp210x.c | 2 - drivers/usb/serial/cypress_m8.c | 4 +- drivers/usb/serial/digi_acceleport.c | 6 --- drivers/usb/serial/f81232.c | 5 +- drivers/usb/serial/garmin_gps.c | 6 +-- drivers/usb/serial/io_edgeport.c | 58 ++++++++++++-------------------- drivers/usb/serial/io_ti.c | 21 ++++------- drivers/usb/serial/keyspan.c | 29 +++++++--------- drivers/usb/serial/metro-usb.c | 4 +- drivers/usb/serial/mos7720.c | 37 +++++++++----------- drivers/usb/serial/mos7840.c | 52 +++++++++------------------- drivers/usb/serial/opticon.c | 2 - drivers/usb/serial/pl2303.c | 2 - drivers/usb/serial/quatech2.c | 7 +-- drivers/usb/serial/sierra.c | 2 - drivers/usb/serial/ti_usb_3410_5052.c | 10 ++--- drivers/usb/serial/usb-serial.c | 7 ++- drivers/usb/serial/usb_wwan.c | 2 - drivers/usb/serial/whiteheat.c | 20 +++++------ include/linux/usb/serial.h | 6 ++- 24 files changed, 133 insertions(+), 180 deletions(-)
* USB: mos7720: fix hardware flow controlJohan Hovold2013-06-041-1/+1
| | | | | | | | | The register access to enable hardware flow control depends on the device port number and not the port minor number. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: fix message timeoutsJohan Hovold2013-05-291-3/+3
| | | | | | | | | The control and bulk-message timeouts are specified in milliseconds and should not depend on HZ. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: mos7720: fix DMA to stackJohan Hovold2013-05-291-3/+14
| | | | | | | | | The read_mos_reg function is called with stack-allocated buffers, which must not be used for control messages. Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-3.10-rc1' of ↵Linus Torvalds2013-04-291-65/+3
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB patches from Greg Kroah-Hartman: "Here's the big USB pull request for 3.10-rc1. Lots of USB patches here, the majority being USB gadget changes and USB-serial driver cleanups, the rest being ARM build fixes / cleanups, and individual driver updates. We also finally got some chipidea fixes, which have been delayed for a number of kernel releases, as the maintainer has now reappeared. All of these have been in linux-next for a while" * tag 'usb-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (568 commits) USB: ehci-msm: USB_MSM_OTG needs USB_PHY USB: OHCI: avoid conflicting platform drivers USB: OMAP: ISP1301 needs USB_PHY USB: lpc32xx: ISP1301 needs USB_PHY USB: ftdi_sio: enable two UART ports on ST Microconnect Lite usb: phy: tegra: don't call into tegra-ehci directly usb: phy: phy core cannot yet be a module USB: Fix initconst in ehci driver usb-storage: CY7C68300A chips do not support Cypress ATACB USB: serial: option: Added support Olivetti Olicard 145 USB: ftdi_sio: correct ST Micro Connect Lite PIDs ARM: mxs_defconfig: add CONFIG_USB_PHY ARM: imx_v6_v7_defconfig: add CONFIG_USB_PHY usb: phy: remove exported function from __init section usb: gadget: zero: put function instances on unbind usb: gadget: f_sourcesink.c: correct a copy-paste misnomer usb: gadget: cdc2: fix error return code in cdc_do_config() usb: gadget: multi: fix error return code in rndis_do_config() usb: gadget: f_obex: fix error return code in obex_bind() USB: storage: convert to use module_usb_driver() ...
| * USB: mos7720: always disable uart on closeJohan Hovold2013-03-251-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | Always try to disable the uart on close. Since the switch to tty ports, close will be called as part of shutdown before disconnect returns. Hence there is no need to check the disconnected flag, and we can put devices in disabled states also on driver unbind. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: mos7720: remove broken get_icount and TIOCMIWAITJohan Hovold2013-03-251-55/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove broken get_icount and TIOCMIWAIT support. The driver has an icount structure but it is never been updated which makes get_icount rather pointless and causes TIOCMIWAIT to always return -EIO. Note that the TIOCMIWAIT implementation has always been broken and would not work even if icount support was added as it does not wait for the modem status to change (does not use a work queue at all). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | TTY: add tty_port_tty_wakeup helperJiri Slaby2013-03-191-6/+2
|/ | | | | | | | | | | | It allows for cleaning up on a considerable amount of places. They did port_get, wakeup, kref_put. Now the only thing needed is to call tty_port_tty_wakeup which does exactly that. One exception is ifx6x60 where tty_wakeup was open-coded. We now call tty_wakeup properly there. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: switch tty_flip_buffer_pushJiri Slaby2013-01-161-5/+2
| | | | | | | | | | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. Now, the one where most of tty_port_tty_get gets removed: tty_flip_buffer_push. IOW we also closed all the races in drivers not using tty_port_tty_get at all yet. Also we move tty_flip_buffer_push declaration from include/linux/tty.h to include/linux/tty_flip.h to all others while we are changing it anyway. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* TTY: switch tty_insert_flip_stringJiri Slaby2013-01-161-1/+1
| | | | | | | | | | | | Now, we start converting tty buffer functions to actually use tty_port. This will allow us to get rid of the need of tty in many call sites. Only tty_port will needed and hence no more tty_port_tty_get in those paths. tty_insert_flip_string this time. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 00:09:04 +0100