summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial (follow)
Commit message (Collapse)AuthorAgeFilesLines
* USB: Add device id for Option GTM380 to option driverAchilleas Kotsis2009-03-171-0/+2
| | | | | | | | | | Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis <akots@exponent.gr> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add Vendor/Product ID for new CDMA U727 to option driverDirk Hohndel2009-03-171-0/+2
| | | | | | | | | | | * newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel <hohndel@infradead.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530Dan Williams2009-03-171-8/+0
| | | | | | | | | | | | | The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option.c: add ZTE 622 modem deviceAlbert Pauw2009-03-171-0/+2
| | | | | | | | | | Please consider this small patch for the usb option-card driver. This patch adds the ZTE 622 usb modem device. Signed-off-by: Albert Pauw <albert.pauw@gmail.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: new cp2101 device idRobert M. Kenney2009-03-171-0/+1
| | | | | | | From: Robert M. Kenney <rmk@unh.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist ↵Michael Hennerich2009-03-172-0/+9
| | | | | | | | | | | interface0 Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: add FTDI USB/Serial converter devicesAxel Wachtler2009-03-172-0/+16
| | | | | | | | | | | | | | | | | | | | Add the following devices to the USB FTDI SIO device table: Bus 001 Device 009: ID 03eb:2109 Atmel Corp. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187 Bus 001 Device 008: ID 1cf1:0001 http://www.dresden-elektronik.de/shop/prod75.html Bus 001 Device 007: ID 1c1f:0004 http://www.dresden-elektronik.de/shop/prod64.html Signed-off-by: Axel Wachtler <axel.wachtler@atmel.com> Signed-off-by: Robert Richter <robert.richter@amd.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: add support for second revision of Ericsson F3507G WWAN cardPatrik Kullman2009-02-271-2/+4
| | | | | | | | | I noticed that my revision of the F3507G WWAN card isn't listed in drivers/usb/serial/option.c Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: add BenQ 3g modem informationJesse Sung2009-02-271-0/+5
| | | | | | | | | | This patch addes the BenQ 3g modem support to the option driver. From: Jesse Sung <jsung@novell.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: New mobile broadband modems to be supportedDirk De Schepper2009-02-091-28/+56
| | | | | | | | | | | | | - New Novatel and Dell mobile broadband modem products added - Dell pid variables used in stead of numerical PIDs for known products Signed-off-by: Dirk De Schepper <ddeschepper@nvtl.com> Cc: stable <stable@kernel.org> Signed-off-by: Matthias Urlichs <matthias@urlichs.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: two more usb ids for ti_usb_3410_5052Oliver Neukum2009-02-092-3/+9
| | | | | | | | | | | This patch adds device IDs and balances the counts to make the hot ID additioning mechanism work. Signed-off-by: Oliver Neukum <oneukum@suse.de> Cc: stable <stable@kernel.org> Cc: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: unlock_kernel() on error in set_serial_info()Dan Carpenter2009-02-091-1/+3
| | | | | | | | | | | There was one error path where unlock_kernel() wasn't called. This was found with a code checker (http://repo.or.cz/w/smatch.git/) Compile tested only, sorry. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: add support for the NDI Polaris systemStephane Clerambault2009-02-092-0/+4
| | | | | | | | | | Add support for the NDI Polaris system *http://www.ndigital.com/). Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: usb-serial: fix the aircable_init failure pathDave Young2009-02-091-2/+2
| | | | | | | | | The failure path of aircable_init is wrong, fix the order of (goto) labels. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Naranjo Manuel Francisco <naranjo.manuel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert USB: option: add Pantech cardsGreg Kroah-Hartman2009-02-091-9/+0
| | | | | | | | | | | | | | Revert 8b6346ec899713a90890c9e832f7eff91ea73504 as these devices really work just fine with the cdc-acm driver, as they follow the spec properly. Thanks to Chuck Ebbert for pointing out the problem here. Cc: Chuck Ebbert <cebbert@redhat.com> Cc: Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: add QUANTA HSDPA Data Card device idsAlex.Cheng@quantatw.com2009-01-281-0/+12
| | | | | | | | | | This patch adds the support for the QUANTA Q101 series HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: Alex Cheng <alex.cheng@quantatw.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: new id for ti_usb_3410_5052 driverOliver Neukum2009-01-282-0/+5
| | | | | | | | This adds a new device id Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: 'option' driver - onda device MT503HS has wrong idMarcel Sebek2009-01-281-1/+1
| | | | | | | | | | | | | | | | While trying to make GSM modem Onda MT503HS working, I found a mismatch between device id in the driver code (0x0200) and id in the lsusb output (0x2000). This patch fixed it for me, but I don't know if the original device id was also correct and the new ID should be added instead of replacing the old one. Signed-off-by: Marcel Sebek <sebek64@post.cz> Acked-by: Domenico Riccio <domenico.riccio@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio driver support of bar code scanner from DieboldMhayk Whandson2009-01-282-0/+6
| | | | | | | | Added the product id of bcs(bar code scanner) from Diebold Procomp Brazil. Signed-off-by: Mhayk Whandson <eu@mhayk.com.br> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: added Alti-2 VID and Neptune 3 PIDRobie Basak2009-01-282-0/+5
| | | | | | | | | This patch adds the vendor and product ID for the Alti-2 Neptune 3 (http://www.alti-2.com) which uses the FTDI chip. Signed-off-by: Robie Basak <rb-oss-1@justgohome.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cp2101 deviceTomasz K2009-01-281-0/+1
| | | | | | | | | | My girl use modem GSM (EDGE) Commanader 2 on iPlus Polsih provider, PLEASE add this vendor=0x10C4 and product=0x822B to USB serial driver cp2101.c From: Tomasz K <eros81@o2.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cp2101: add fasttrax GPS evaluation kit vendor/product IDWolfgang Glas2009-01-281-0/+1
| | | | | | | | | | | | | | This adds the vendor/product ID of the fasttrax GPS evaluation kit from: http://www.fastraxgps.com/products/evaluationtools/evaluationkit/ to the cp2101 module since this device is actually equipped with a CP210x USB to serial bridge. The vendor/product ID is: 0x10c4/0x826b. Signed-off-by: Wolfgang Glas <wolfgang.glas@ev-i.at> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* ftdi_sio: fix kref leakJim Paris2009-01-151-1/+1
| | | | | | | | | | Commit 4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8c added kref stuff to ftdi_sio, but missed tty_kref_put at one exit point in ftdi_process_read. Signed-off-by: Jim Paris <jim@jtan.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ti_usb_3410_5052: add Multi-Tech firmwareChris Adams2009-01-131-0/+3
| | | | | | | | | | | | | | | Add the Multi-Tech cellular modem firmware to the TI USB serial driver. This firmware was extracted from: ftp://ftp.multitech.com/wireless/wireless_linux.zip Firmware licence: "all firmware components are redistributable in binary form" per support@multitech.com Copyright (C) 2005 Multi-Tech Systems, Inc. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ti_usb_3410_5052: add Multi-Tech modem supportChris Adams2009-01-132-5/+39
| | | | | | | | Add Multi-Tech cellular modem support to the ti_usb_3410_5052 driver. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ti_usb_3410_5052: support alternate firmwareChris Adams2009-01-131-15/+29
| | | | | | | | | | | | The TI USB serial driver supports specifying alternate vendor and product IDs (since the chips can and are used in devices under other vendor/product IDs). However, the alternate IDs were not loaded in the combined product table. This patch also adds support for loading alternate firmware for alternate vendor/product IDs. Signed-off-by: Chris Adams <cmadams@hiwaay.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* usb-serial: remove NULL checkAlan Cox2009-01-131-3/+0
| | | | | | | | | Julia Lawell found a case where a NULL check was misplaced in the usb-serial code. However as the object in question cannot be NULL the check can simply be removed. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: add siemens_mpi usb-serial "stub" driverGreg Kroah-Hartman2009-01-073-0/+86
| | | | | | | | | | | This driver got rescued from a few years ago and was requested to be added. So I cleaned it up, ported it to the latest kernel version and here it is. Cc: Thomas Hergenhahn <thomas.hergenhahn@suse.de> Cc: Emmanuele <iemmav@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add new opticon serial driverGreg Kroah-Hartman2009-01-073-0/+368
| | | | | | | | This is for the serial mode of the Opticon barcode scanner. Cc: Kees Stoop <kees.stoop@opticon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option: increase outgoing buffer size and numberGreg Kroah-Hartman2009-01-071-2/+2
| | | | | | | | This should speed up the option driver's upload speed quite a bit. It has been tested by a number of different people on different devices with success. Cc: Roland Wolters <roland.wolters@credativ.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: fix up urb->status usageGreg Kroah-Hartman2009-01-076-65/+68
| | | | | | | | Some of the usb-serial drivers are starting to use urb->status in ways they should not be doing. This fixes up some of them to prevent that. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: usb_debug: Make staticRoel Kluin2009-01-071-1/+1
| | | | | | | | Sparse asked whether these could be static. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: serial: ipw.c: mark {__init|__exit} for usb_ipw_{init|exit}Qinghuang Feng2009-01-071-2/+2
| | | | | | | | mark {__init|__exit} for usb_ipw_{init|exit} () Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* tty: Drop the lock_kernel in the private ioctl hookAlan Cox2009-01-025-8/+14
| | | | | | | | We don't need the BKL here any more so it can go. In a couple of spots the driver requirements are not clear so push the lock down into the driver. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tty: USB tty devices can block in tcdrain when unpluggedAlan Cox2009-01-021-0/+4
| | | | | | | | | | | | The underlying problem is that the device methods don't all correctly handle disconnected status and some keep reporting bytes pending which causes tcdrain to stall. When the cable is unplugged they are definitely gone, and as this is true for all USB cables we can fix it in the core usb serial code. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add device function for USB serial consoleKevin Hao2009-01-021-0/+13
| | | | | | | | | | | Add device funtion for usb serial console, so we can open /dev/console when we use a usb serial device as console. (Typecast removed as noted by Sergei Shtylyov) Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* tty: Fix close races in USB serialAlan Cox2009-01-021-5/+10
| | | | | | | | | | | USB serial has always had races where the tty port usage count can hit zero during a receive event. The internal locking is a mutex so we can't use that in the IRQ handlers. With krefs we can tackle this differently but we still need to be careful. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* sierra: Fix formattingAlan Cox2009-01-021-1/+1
| | | | | | | | | | | | | | | | Andrew Morton wrote: in drivers/usb/serial/sierra.c: } else { if (urb->actual_length) { + tty = tty_port_tty_get(&port->port); tty_buffer_request_room(tty, urb->actual_length); it's missing a tab. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: pl2303: add id for Hewlett-Packard LD220-HP POS pole displayMike Provencher2008-12-172-0/+5
| | | | | | | | | | | Add id for the Hewlett-Packard LD220-HP POS pole display. Bus 002 Device 002: ID 03f0:3524 Hewlett-Packard Signed-off-by: Mike Provencher <mike.provencher@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: set correct configuration in probe of ti_usb_3410_5052Oliver Neukum2008-12-171-52/+3
| | | | | | | | | This driver transfers firmware. It may just as well set the correct configuration. Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: add 5372:2303 to pl2303Matthew Arnold2008-12-172-0/+5
| | | | | | | | | | | | This patch adds the "Superial" USB-Serial converter to pl2303 so that it is detected, by the correct driver. Adds the relevant vendor:product (5372:2303) to the device tables in pl2303.c & pl2303.h. The patch has been tested against 2.6.24-22-generic. Signed-off-by: Matthew D Arnold <matthew.arnold-1@uts.edu.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ftdi_sio: Adding Ewert Energy System's CANdapter PIDAndrew Ewert2008-12-172-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The following patch adds in the USB PID for Ewert Energy System's CANdapter device (CANBUS to USB-Serial which uses the FTDI 245R chipset) to the ftdi_sio device driver. The patch was tested successfully on Linux kernel 2.6.27 under Ubuntu. Relevant output from /proc/bus/usb/devices (With patch installed): T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=9f80 Rev= 6.00 S: Manufacturer=Ewert Energy Systems S: Product=CANdapter S: SerialNumber=A6RGB3Z3 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: Andrew Ewert <andrew@ewertenergy.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: tty: SprogII DCC controller identifiersAlan Cox2008-12-172-0/+4
| | | | | | | | | | | | | | Someone on rmweb reminded me this had been overlooked from ages ago.. Add the identifiers for the Sprog II USB. This is a DCC control interface using the FTDI-SIO hardware: http://www.sprog-dcc.co.uk/. People have been using it with insmod options for ages, this just puts it into the driver data. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Fix incorrect use of loose in tty/serial driversNick Andrew2008-12-051-1/+1
| | | | | | | | | | [Folded together as one diff from 3] It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add kref to fake tty used by USB consoleKevin Hao2008-12-011-0/+1
| | | | | | | | | | We alloc a fake tty in usb serial console setup function. we should init the tty's kref otherwise we will face WARN_ON after following invoke of tty_port_tty_set --> tty_kref_get. Signed-off-by: Kevin Hao <kexin.hao@windriver.com> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* USB: serial: add more Onda device ids to option driverGreg Kroah-Hartman2008-12-011-0/+35
| | | | | | | | Thanks to Domenico Riccio for pointing these out. Cc: Domenico Riccio <domenico.riccio@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: ACE1001 patch for cp2101.cM Kondrin2008-11-201-0/+1
| | | | | | | | | The patch which adds IDs for AKTAKOM USB->RS232 cable (http://www.aktakom.ru/product/kio/ace-1001.htm) is attached. From: M Kondrin <mkondrin@hppi.troitsk.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* + usb-serial-cp2101-add-enfora-gsm2228.patch added to -mm treeDamir N Abdullin2008-11-131-0/+1
| | | | | | | | | | Enfora GSM2228 based on Cygnal Integrated Products chip uses the same cp2101 driver. Signed-off-by: Damir N Abdullin <damir@mimas.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: CP2101 Add device ID for AMB2560Craig Shelley2008-11-131-0/+1
| | | | | | | | This patch adds the device vendor and product IDs for Amber Wireless AMB2560 Signed-off-by: Craig Shelley <craig@microtron.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: Add YISO u893 usb modem vendor and product IDs to option driverLeslie Watter2008-11-131-0/+6
| | | | | | | | | | This patch adds YISO u893 usb modem vendor and product ID to option.c. I had a better experience using this modification and the same system. Signed-off-by: Leslie Harlley Watter <leslie@watter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-16 17:11:05 +0100