summaryrefslogtreecommitdiffstats
path: root/drivers/usb (follow)
Commit message (Collapse)AuthorAgeFilesLines
* USB: additional regression fix for device removalAlan Stern2011-07-071-1/+8
| | | | | | | | | | | | | | | | | Commit e534c5b831c8b8e9f5edee5c8a37753c808b80dc (USB: fix regression occurring during device removal) didn't go far enough. It failed to take into account that when a driver claims multiple interfaces, it may release them all at the same time. As a result, some interfaces can get released before they are unregistered, and we deadlock trying to acquire the bandwidth_mutex that we already own. This patch (asl478) handles this case by setting the "unregistering" flag on all the interfaces before removing any of them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Tested-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fix regression occurring during device removalAlan Stern2011-07-011-0/+2
| | | | | | | | | | | | | | | | | | This patch (as1476) fixes a regression introduced by fccf4e86200b8f5edd9a65da26f150e32ba79808 (USB: Free bandwidth when usb_disable_device is called). usb_disconnect() grabs the bandwidth_mutex before calling usb_disable_device(), which calls down indirectly to usb_set_interface(), which tries to acquire the bandwidth_mutex. The fix causes usb_set_interface() to return early when it is called for an interface that has already been unregistered, which is what happens in usb_disable_device(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: fsl_udc_core: fix build breakage when building for ARM archAnatolij Gustschin2011-07-011-12/+24
| | | | | | | | | | | | | | | | | | Commit 09ba0def (USB: fsl_udc_core: prepare for SoCs with BE registers and descriptors) introduced build breakage on ARM arch. Fix it by setting accessors using a static inline function which is a nop when compiling the driver for ARM arch. Commit 2ea6698 (USB: fsl_udc_core: support device mode of MPC5121E DR USB Controller) caused another breakage on ARM by using flush_dcache_range(). Don't use it, convert to the DMA API usage instead. USB2.0CV Halt Endpoint Test succeeds on PPC. Tested both on ARM i.MX31 and mpc5121 PPC, also with CONFIG_DMA_API_DEBUG enabled. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Merge branch 'usb-linus' of ↵Linus Torvalds2011-06-2819-31/+146
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: MAINTAINERS: add myself as maintainer of USB/IP usb: r8a66597-hcd: fix cannot detect low/full speed device USB: ehci-ath79: fix a NULL pointer dereference USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c usb/isp1760: Fix bug preventing the unlinking of control urbs USB: Fix up URB error codes to reflect implementation. xhci: Always set urb->status to zero for isoc endpoints. xhci: Add reset on resume quirk for asrock p67 host xHCI 1.0: Incompatible Device Error USB: don't let errors prevent system sleep USB: don't let the hub driver prevent system sleep USB: change maintainership of ohci-hcd and ehci-hcd xHCI 1.0: Force Stopped Event(FSE) xhci: Don't warn about zeroed bMaxBurst descriptor field. USB: Free bandwidth when usb_disable_device is called. xhci: Reject double add of active endpoints. USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big. usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO usb: musb: host: compare status for negative error values
| * usb: r8a66597-hcd: fix cannot detect low/full speed deviceYoshihiro Shimoda2011-06-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | This controller can control "Transaction Translators", but the hcd->has_tt is not set. Since the commit d199c96d41d80a567493e12b8e96ea056a1350c1 ("USB: prevent buggy from crashing the USB stack") has checked it, the driver could not work the low/full speed device. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: ehci-ath79: fix a NULL pointer dereferenceGabor Juhos2011-06-271-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Loading the ehci-hcd module on the ath79 platform causes a NULL pointer dereference: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == c0252928, ra == c00de968 Oops[#1]: Cpu 0 $ 0 : 00000000 00000070 00000001 00000000 $ 4 : 802cf870 0000117e ffffffff 8019c7bc $ 8 : 0000000a 00000002 00000001 fffffffb $12 : 8026ef20 0000000f ffffff80 802dad3c $16 : 8077a2d4 8077a200 c00f3484 8019ed84 $20 : c00f0000 00000003 000000a0 80262c2c $24 : 00000002 80079da0 $28 : 80788000 80789c80 80262b14 c00de968 Hi : 00000000 Lo : b61f0000 epc : c0252928 __mod_vermagic5+0xc260/0xc7e8 [ehci_hcd] Not tainted ra : c00de968 usb_add_hcd+0x2a4/0x858 [usbcore] Status: 1000c003 KERNEL EXL IE Cause : 00800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ehci_hcd(+) pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multiport xt_mac xt_limit iptable_mangle iptable_filte r ip_tables xt_tcpudp x_tables ppp_async ppp_generic slhc ath mac80211 usbcore nls_base input_polldev crc_ccitt cfg80211 compat input_core a rc4 aes_generic crypto_algapi Process insmod (pid: 379, threadinfo=80788000, task=80ca2180, tls=77fe52d0) Stack : c0253184 80c57d80 80789cac 8077a200 00000001 8019edc0 807fa800 8077a200 8077a290 c00f3484 8019ed84 c00f0000 00000003 000000a0 80262c2c c00de968 802d0000 800878cc c0253228 c02528e4 c0253184 80c57d80 80bf6800 80ca2180 8007b75c 00000000 8077a200 802cf830 802d0000 00000003 fffffff4 00000015 00000348 00000124 800b189c c024bb4c c0255000 801a27e8 c0253228 c02528e4 ... Call Trace: [<c0252928>] __mod_vermagic5+0xc260/0xc7e8 [ehci_hcd] It is caused by: commit c430131a02d677aa708f56342c1565edfdacb3c0 Author: Jan Andersson <jan@gaisler.com> Date: Tue May 3 20:11:57 2011 +0200 USB: EHCI: Support controllers with big endian capability regs The two first HC capability registers (CAPLENGTH and HCIVERSION) are defined as one 8-bit and one 16-bit register. Most HC implementations have selected to treat these registers as part of a 32-bit register, giving the same layout for both big and small endian systems. This patch adds a new quirk, big_endian_capbase, to support controllers with big endian register interfaces that treat HCIVERSION and CAPLENGTH as individual registers. Signed-off-by: Jan Andersson <jan@gaisler.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> The reading of the HC capability register has been moved by that commit to a place where the ehci->caps field is not initialized yet. This patch moves the reading of the register back to the original place. Acked-by: Jan Andersson <jan@gaisler.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.cUwe Bonnes2011-06-273-6/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | appended patch adds support for the new FTDI FT232H chip. This chip is a single channel version of the dual FT2232H/quad FT4232H, coming with it's own default PID 0x6014 (FT2232H uses the same PID 0x6010 like FT2232C, FT4232H has also it's own PID). The patch was checked on an UM232H module and a terminal program with TX/RX shorted to that typing in the terminal reproduced the characters. Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb/isp1760: Fix bug preventing the unlinking of control urbsArvid Brodin2011-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Both control and bulk transfers use isp1760 slots of type ATL, but the driver unlink code for ATL slots only acts on urbs describing a bulk transfer, letting the code for INT slots take care of the unlink instead, which often ended up removing the interrupt transfer for root hub events instead. That's not good, and gets fixed by this patch. Signed-off-by: Arvid Brodin <arvid.brodin@enea.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * Merge branch 'for-usb-linus' of ↵Greg Kroah-Hartman2011-06-277-12/+88
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus * 'for-usb-linus' of git+ssh://master.kernel.org/pub/scm/linux/kernel/git/sarah/xhci: USB: Fix up URB error codes to reflect implementation. xhci: Always set urb->status to zero for isoc endpoints. xhci: Add reset on resume quirk for asrock p67 host xHCI 1.0: Incompatible Device Error xHCI 1.0: Force Stopped Event(FSE) xhci: Don't warn about zeroed bMaxBurst descriptor field. USB: Free bandwidth when usb_disable_device is called. xhci: Reject double add of active endpoints.
| | * xhci: Always set urb->status to zero for isoc endpoints.Sarah Sharp2011-06-171-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the xHCI driver encounters a Missed Service Interval event for an isochronous endpoint ring, it means the host controller skipped over one or more isochronous TDs. For TD that is skipped, skip_isoc_td() is called. This sets the frame descriptor status to -EXDEV, and also sets the value stored in the int pointed to by status to -EXDEV. If the isochronous TD happens to be the last TD in an URB, handle_tx_event() will use the status variable to give back the URB to the USB core. That means drivers will see urb->status as -EXDEV. It turns out that EHCI, UHCI, and OHCI always set urb->status to zero for an isochronous urb, regardless of what the frame status is. See itd_complete() in ehci-sched.c: } else { /* URB was too late */ desc->status = -EXDEV; } } /* handle completion now? */ if (likely ((urb_index + 1) != urb->number_of_packets)) goto done; /* ASSERT: it's really the last itd for this urb list_for_each_entry (itd, &stream->td_list, itd_list) BUG_ON (itd->urb == urb); */ /* give urb back to the driver; completion often (re)submits */ dev = urb->dev; ehci_urb_done(ehci, urb, 0); ehci_urb_done() completes the URB with the status of the third argument, which is always zero in this case. It turns out that many USB webcam drivers, such as uvcvideo, cannot handle urb->status set to a non-zero value. They will not resubmit their isochronous URBs in that case, and userspace will see a frozen video. Change the xHCI driver to be consistent with the EHCI and UHCI driver, and always set urb->status to 0 for isochronous URBs. This patch should be backported to kernels as old as 2.6.36 Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: "Xu, Andiry" <Andiry.Xu@amd.com> Cc: stable@kernel.org
| | * xhci: Add reset on resume quirk for asrock p67 hostMaarten Lankhorst2011-06-173-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The asrock p67 xhci controller completely dies on resume, add a quirk for this, to bring the host back online after a suspend. This should be backported to stable kernels as old as 2.6.37. Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
| | * xHCI 1.0: Incompatible Device ErrorAlex He2011-06-173-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is one new TRB Completion Code for the xHCI spec v1.0. Asserted if the xHC detects a problem with a device that does not allow it to be successfully accessed, e.g. due to a device compliance or compatibility problem. This error may be returned by any command or transfer, and is fatal as far as the Slot is concerned. Return -EPROTO by urb->status or frame->status of ISOC for transfer case. And return -ENODEV for configure endpoint command, evaluate context command and address device command if there is an incompatible Device Error. The error codes will be sent back to the USB core to decide how to do. It's unnecessary for other commands because after the three commands run successfully means that the device has been accepted. Signed-off-by: Alex He <alex.he@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * xHCI 1.0: Force Stopped Event(FSE)Alex He2011-06-151-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FSE shall occur on the TD natural boundary. The software ep_ring dequeue pointer exceed the hardware ep_ring dequeue pointer in these cases of Table-3. As a result, the event_trb(pointed by hardware dequeue pointer) of the FSE can't be found in the current TD(pointed by software dequeue pointer). What should we do is to figured out the FSE case and skip over it. Signed-off-by: Alex He <alex.he@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * xhci: Don't warn about zeroed bMaxBurst descriptor field.Sarah Sharp2011-06-151-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB 3.0 specification says that the bMaxBurst field in the SuperSpeed Endpoint Companion descriptor is supposed to indicate how many packets a SS device can handle before it needs to wait for an explicit handshake from the host controller. A zero value means the device can only handle one packet before it needs a handshake. Remove a warning in the xHCI driver that implies this is an invalid value. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| | * USB: Free bandwidth when usb_disable_device is called.Sarah Sharp2011-06-152-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tanya ran into an issue when trying to switch a UAS device from the BOT configuration to the UAS configuration via the bConfigurationValue sysfs file. Before installing the UAS configuration, set_bConfigurationValue() calls usb_disable_device(). That function is supposed to remove all host controller resources associated with that device, but it leaves some state in the xHCI host controller. Commit 0791971ba8fbc44e4f476079f856335ed45e6324 usb: allow drivers to use allocated bandwidth until unbound added a call to usb_disable_device() in usb_set_configuration(), before the xHCI bandwidth functions were invoked. That commit fixed a bug, but also introduced a bug that is triggered when a configured device is switched to a new configuration. usb_disable_device() goes through all the motions of unbinding the drivers attached to active interfaces and removing the USB core structures associated with those interfaces, but it doesn't actually remove the endpoints from the internal xHCI host controller bandwidth structures. When usb_disable_device() calls usb_disable_endpoint() with reset_hardware set to true, the entries in udev->ep_out and udev->ep_in will be set to NULL. Usually, when the USB core installs a new configuration, usb_hcd_alloc_bandwidth() will drop all non-NULL endpoints in udev->ep_out and udev->ep_in before adding any new endpoints. However, when the new UAS configuration was added, all those entries were null, so none of the old endpoints in the BOT configuration were dropped. The xHCI driver blindly added the UAS configuration endpoints, and some of the endpoint addresses overlapped with the old BOT configuration endpoints. This caused the xHCI host to reject the Configure Endpoint command. Now that the xHCI driver code is cleaned up to reject a double-add of active endpoints, we need to fix the USB core to properly drop old endpoints in usb_disable_device(). If the host controller driver needs bandwidth checking support, make usb_disable_device() call usb_disable_endpoint() with reset_hardware set to false, drop the endpoints from the xHCI host controller, and then call usb_disable_endpoint() again with reset_hardware set to true. The first call to usb_disable_endpoint() will cancel any pending URBs and wait on them to be freed in usb_hcd_disable_endpoint(), but will keep the pointers in udev->ep_out and udev->ep in intact. Then usb_hcd_alloc_bandwidth() will use those pointers to know which endpoints to drop. The final call to usb_disable_endpoint() will do two things: 1. It will call usb_hcd_disable_endpoint() again, which should be harmless since the ep->urb_list should be empty after the first call to usb_disable_endpoint() returns. 2. It will set the entries in udev->ep_out and udev->ep in to NULL, and call usb_hcd_disable_endpoint(). That call will have no effect, since the xHCI driver doesn't set the endpoint_disable function pointer. Note that usb_disable_device() will now need to be called with hcd->bandwidth_mutex held. This should be backported to kernels as old as 2.6.32. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Tanya Brokhman <tlinder@codeaurora.org> Cc: ablay@codeaurora.org Cc: Alan Stern <stern@rowland.harvard.edu> Cc: stable@kernel.org
| | * xhci: Reject double add of active endpoints.Sarah Sharp2011-06-151-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While trying to switch a UAS device from the BOT configuration to the UAS configuration via the bConfigurationValue file, Tanya ran into an issue in the USB core. usb_disable_device() sets entries in udev->ep_out and udev->ep_out to NULL, but doesn't call into the xHCI bandwidth management functions to remove the BOT configuration endpoints from the xHCI host's internal structures. The USB core would then attempt to add endpoints for the UAS configuration, and some of the endpoints had the same address as endpoints in the BOT configuration. The xHCI driver blindly added the endpoints again, but the xHCI host controller rejected the Configure Endpoint command because active endpoints were added without being dropped. Make the xHCI driver reject calls to xhci_add_endpoint() that attempt to add active endpoints without first calling xhci_drop_endpoint(). This should be backported to kernels as old as 2.6.31. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Tanya Brokhman <tlinder@codeaurora.org> Cc: stable@kernel.org
| * | USB: don't let errors prevent system sleepAlan Stern2011-06-161-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1464) implements the recommended policy that most errors during suspend or hibernation should not prevent the system from going to sleep. In particular, failure to suspend a USB driver or a USB device should not prevent the sleep from succeeding: Failure to suspend a device won't matter, because the device will automatically go into suspend mode when the USB bus stops carrying packets. (This might be less true for USB-3.0 devices, but let's not worry about them now.) Failure of a driver to suspend might lead to trouble later on when the system wakes up, but it isn't sufficient reason to prevent the system from going to sleep. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: don't let the hub driver prevent system sleepAlan Stern2011-06-161-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1465) continues implementation of the policy that errors during suspend or hibernation should not prevent the system from going to sleep. In this case, failure to turn on the Suspend feature for a hub port shouldn't be reported as an error. There are situations where this does actually occur (such as when the device plugged into that port was disconnected in the recent past), and it turns out to be harmless. There's no reason for it to prevent a system sleep. Also, don't allow the hub driver to fail a system suspend if the downstream ports aren't all suspended. This is also harmless (and should never happen, given the change mentioned above); printing a warning message in the kernel log is all we really need to do. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | USB: change maintainership of ohci-hcd and ehci-hcdAlan Stern2011-06-162-1/+7
| |/ | | | | | | | | | | | | | | Following the loss of David Brownell, I volunteer to maintain the ohci-hcd and ehci-hcd drivers. This patch (as1472) makes it official. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big.Jesper Juhl2011-06-141-0/+1
| | | | | | | | | | | | | | | | | | If the size of the firmware exceeds TI_FIRMWARE_BUF_SIZE we'll leak 'fw_p' by failing to call release_firmware(). This patch fixes the leak. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFOYauheni Kaliuta2011-06-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes mis-use of MUSB's hardware feature where it won't flush FIFOs when TXPKTRDY flag was set before and we are flushing setting both FLUSHFIFO and TXPKTRDY. In other words, we need to ensure that when we try to flush FIFOs, we don't accidentaly set TXPKTRDY bit too due to a read-back of the register. The MUSB Programming Guide says "May be set simultaneously with TxPktRdy to abort the packet that is currently being loaded into the FIFO". This is a situation where TXPKTRDY hasn't been set yet, but some data already loaded into the fifo. It looks, that if TXPKTRDY has been set before, and there is no loading in progress, but we set FLUSHFIFO with the TXPKTRDY, controller tries to use the same logic to abort loading and as the result just does nothing (because there is no packet been loaded currently) Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> [ balbi@ti.com : fixed one whitespace git complained about improved the commit log slightly ] Signed-off-by: Felipe Balbi <balbi@ti.com>
| * usb: musb: host: compare status for negative error valuesMárton Németh2011-06-091-1/+1
| | | | | | | | | | | | | | | | Variable d is a struct usb_iso_packet_descriptor. The status filed is usually negative when an error happens. Signed-off-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | PM: Rename dev_pm_info.in_suspend to is_preparedAlan Stern2011-06-211-3/+3
|/ | | | | | | | | | This patch (as1473) renames the "in_suspend" field in struct dev_pm_info to "is_prepared", in preparation for an upcoming change. The new name is more descriptive of what the field really means. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: stable@kernel.org
* USB: serial: add another 4N-GALAXY.DE PID to ftdi_sio driverSteffen Sledz2011-06-082-0/+2
| | | | | | | | E.g. newer CAN 2.0 A/B <=> USB 2.0 converters report idProduct=f3c2. Signed-off-by: Steffen Sledz <sledz@dresearch-fe.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* Revert "USB: option: add ID for ZTE MF 330"Greg Kroah-Hartman2011-06-081-5/+0
| | | | | | | | | | | | | | | | | | This reverts commit a559d2c8c1bf652ea2d0ecd6ab4a250fcdb37db8. Turns out that device id 0x1d6b:0x0002 is a USB hub, which causes havoc when the option driver tries to bind to it. So revert this as it doesn't seem to be needed at all. Thanks to Michael Tokarev and Paweł Drobek for working on resolving this issue. Cc: Paweł Drobek <pawel.drobek@gmail.com> Cc: Michael Tokarev <mjt@tls.msk.ru> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* drivers/usb/host/ohci-pxa27x.c: add missing clk_putJulia Lawall2011-06-071-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a label before the call to clk_put and jump to that in the error handling code that occurs after the call to clk_get has succeeded. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression e1,e2; statement S; @@ e1 = clk_get@p1(...); ... when != e1 = e2 when != clk_put(e1) when any if (...) { ... when != clk_put(e1) when != if (...) { ... clk_put(e1) ... } * return@p3 ...; } else S // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurableAlan Stern2011-06-071-4/+1
| | | | | | | | | | | | | This patch (as1468) changes the Kconfig definition for USB_GADGET_DUALSPEED. This option is determined entirely by which device controller drivers are to be built, through Select statements; it does not need to be (and should not be) configurable by the user. Also, the "default n" line is superfluous -- everything defaults to N. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: dummy-hcd needs the has_tt flagAlan Stern2011-06-071-0/+1
| | | | | | | | | | | Like with other host controllers capable of operating at both high speed and full speed, we need to indicate that the emulated controller presented by dummy-hcd has this ability. Otherwise usbcore will not accept full-speed gadgets under dummy-hcd. This patch (as1469) sets the appropriate has_tt flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-storage: redo incorrect readsAlan Stern2011-06-074-1/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some USB mass-storage devices have bugs that cause them not to handle the first READ(10) command they receive correctly. The Corsair Padlock v2 returns completely bogus data for its first read (possibly it returns the data in encrypted form even though the device is supposed to be unlocked). The Feiya SD/SDHC card reader fails to complete the first READ(10) command after it is plugged in or after a new card is inserted, returning a status code that indicates it thinks the command was invalid, which prevents the kernel from retrying the read. Since the first read of a new device or a new medium is for the partition sector, the kernel is unable to retrieve the device's partition table. Users have to manually issue an "hdparm -z" or "blockdev --rereadpt" command before they can access the device. This patch (as1470) works around the problem. It adds a new quirk flag, US_FL_INVALID_READ10, indicating that the first READ(10) should always be retried immediately, as should any failing READ(10) commands (provided the preceding READ(10) command succeeded, to avoid getting stuck in a loop). The patch also adds appropriate unusual_devs entries containing the new flag. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Sven Geggus <sven-usbst@geggus.net> Tested-by: Paul Hartman <paul.hartman+linux@gmail.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb/renesas_usbhs: free uep on removalSebastian Andrzej Siewior2011-06-071-0/+1
| | | | | | | | Can't find evidence that this is actually done. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb/s3c-hsudc: fix error pathSebastian Andrzej Siewior2011-06-071-2/+4
| | | | | | | | | I doubt the clock is optional. In case it is it should not return with an error code because we leak everything. Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb/pxa25x_udc: cleanup the LUBBOCK err pathSebastian Andrzej Siewior2011-06-071-3/+2
| | | | | | | this is more backwords than it has to be. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb/mv_udc_core: fix compileSebastian Andrzej Siewior2011-06-071-4/+4
| | | | | | | | | | | | | | | | | | |drivers/usb/gadget/mv_udc_core.c:2108: error: label `error' used but not defined This seems to be broken since the initial commit. I changed this to a simple return. The other user is the probe code which lets ->probe() fail on error here. |drivers/usb/gadget/mv_udc_core.c:2107: warning: passing argument 1 of `dev_err' from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2118: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2119: warning: initialization from incompatible pointer type |drivers/usb/gadget/mv_udc_core.c:2130: error: initializer element is not constant |drivers/usb/gadget/mv_udc_core.c:2130: error: (near initialization for `udc_driver.driver.pm') Cc: Chao Xie <chao.xie@marvell.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: gadget: include <linux/prefetch.h> to fix compiling errorBryan Wu2011-06-075-0/+5
| | | | | | | | | | | drivers/usb/gadget/at91_udc.c: In function 'write_fifo': drivers/usb/gadget/at91_udc.c:421:2: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/gadget/at91_udc.o] Error 1 make[2]: *** [drivers/usb/gadget] Error 2 make[2]: *** Waiting for unfinished jobs.... Signed-off-by: Bryan Wu <bryan.wu@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: s3c-hsotg: Tone down debuggingMark Brown2011-06-071-10/+12
| | | | | | | | | Currently the s3c-hsotg driver is extremely chatty, producing voluminous with large register dumps even in default operation. Tone this down so we're not chatty unless DEBUG is defined. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb: remove bad dput after dentry_unhashSage Weil2011-06-071-1/+0
| | | | | | | | | | | Commit 64252c75a (vfs: remove dget() from dentry_unhash()) removed the useless dget from dentry_unhash but didn't fix up this caller in the usb code. There used to be exactly one dput per dentry_unhash call; now there are none. Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Sage Weil <sage@newdream.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: core: Tolerate protocol stall during hub and port status readLibor Pechacek2011-06-071-2/+4
| | | | | | | | | | | | Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by: Libor Pechacek <lpechacek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* musb: fix prefetch build failureMike Frysinger2011-06-071-0/+1
| | | | | | | | | | | | | | After the prefetch/list.h restructure, drivers need to explicitly include linux/prefetch.h in order to use the prefetch() function. Otherwise, the current driver fails to build: drivers/usb/musb/musb_core.c: In function 'musb_write_fifo': drivers/usb/musb/musb_core.c:219: error: implicit declaration of function 'prefetch' make[3]: *** [drivers/usb/musb/musb_core.o] Error 1 Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7Toby Gray2011-06-071-0/+2
| | | | | | | | | | | This adds the Nokia E7 and C7 to the list of devices in cdc-acm, allowing the secondary ACM channel on the device to be exposed. Without this patch the ACM driver won't claim this secondary channel as it's marked as having a vendor-specific protocol. Signed-off-by: Toby Gray <toby.gray@realvnc.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* usb-gadget: unlock data->lock mutex on error path in ep_write()Alexey Khoroshilov2011-06-071-1/+3
| | | | | | | | | | | | | | ep_write() acquires data->lock mutex in get_ready_ep() and releases it on all paths except for one: when usb_endpoint_xfer_isoc() failed. The patch adds mutex_unlock(&data->lock) at that path. It is similar to commit 00cc7a5 ("usb-gadget: unlock data->lock mutex on error path in ep_read()"), it was not fixed at that time by accident. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: option Add blacklist for ZTE K3765-Z (19d2:2002)Torsten Hilbrich2011-06-071-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | The funtion option_send_status times out when sending USB messages to the interfaces 0, 1, and 2 of this UMTS stick. This results in a 5s timeout in the function causing other tty operations to feel very sluggish. This patch adds a blacklist entry for these 3 interfaces on the ZTE K3765-Z device. I was also able to reproduce the problem with v2.6.38 and v2.6.39. This is very similar to a problem fixed in commit 7a89e4cb9cdaba92f5fbc509945cf4e3c48db4e2 Author: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Date: Wed Mar 9 09:19:48 2011 +0000 USB: serial: option: Apply OPTION_BLACKLIST_SENDSETUP also for ZTE MF626 Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* option: add Prolink PH300 modem IDsDan Williams2011-06-071-0/+2
| | | | | | | | Simple ID addition. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* option: add Alcatel X200 to sendsetup blacklistDan Williams2011-06-071-2/+11
| | | | | | | | | | | | | | | | This modem really wants sendsetup blacklisted for interfaces 0 and 1, otherwise the kernel hardlocks for about 10 seconds while waiting for the modem's firmware to respond, which it of course doesn't do. A slight complication here is that TCT (who owns the Alcatel brand) used the same USB IDs for the X200 as the X060s despite the devices having completely different firmware and AT command sets, so we end up adding the X060s to the blacklist at the same time. PSA to OEMs: don't use the same USB IDs for different devices. Really. It makes your kittens cry. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* option: add Zoom 4597 modem USB IDsDan Williams2011-06-071-0/+4
| | | | | | | | Uses Longcheer-based firmware and AT command set. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* USB: xhci - fix interval calculation for FS isoc endpointsDmitry Torokhov2011-06-061-2/+12
| | | | | | | | | | | | | | | | | | | | | | | Full-speed isoc endpoints specify interval in exponent based form in frames, not microframes, so we need to adjust accordingly. NEC xHCI host controllers will return an error code of 0x11 if a full speed isochronous endpoint is added with the Interval field set to something less than 3 (2^3 = 8 microframes, or one frame). It is impossible for a full speed device to have an interval smaller than one frame. This was always an issue in the xHCI driver, but commit dfa49c4ad120a784ef1ff0717168aa79f55a483a "USB: xhci - fix math in xhci_get_endpoint_interval()" removed the clamping of the minimum value in the Interval field, which revealed this bug. This needs to be backported to stable kernels back to 2.6.31. Reported-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
* xhci: Disable MSI for some Fresco Logic hosts.Sarah Sharp2011-06-033-2/+20
| | | | | | | | | | | | | | | Some Fresco Logic hosts, including those found in the AUAU N533V laptop, advertise MSI, but fail to actually generate MSI interrupts. Add a new xHCI quirk to skip MSI enabling for the Fresco Logic host controllers. Fresco Logic confirms that all chips with PCI vendor ID 0x1b73 and device ID 0x1000, regardless of PCI revision ID, do not support MSI. This should be backported to stable kernels as far back as 2.6.36, which was the first kernel to support MSI on xHCI hosts. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Reported-by: Sergey Galanov <sergey.e.galanov@gmail.com> Cc: stable@kernel.org
* xhci: Do not issue device reset when device is not setupMaarten Lankhorst2011-06-031-0/+7
| | | | | | | | | | | | | | | | | xHCI controllers respond to a Reset Device command when the Slot is in the Enabled/Disabled state by returning an error. This is fine on other host controllers, but the Etron xHCI host controller returns a vendor-specific error code that the xHCI driver doesn't understand. The xHCI driver then gives up on device enumeration. Instead of issuing a command that will fail, just return. This fixes the issue with the xhci driver not working on ASRock P67 Pro/Extreme boards. This should be backported to stable kernels as far back as 2.6.34. Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
* xhci: Add defines for hardcoded slot statesMaarten Lankhorst2011-06-032-4/+9
| | | | | | | | | This needs to be added to the stable trees back to 2.6.34 to support an upcoming bug fix. Signed-off-by: Maarten Lankhorst <m.b.lankhorst@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@kernel.org
* xhci: Bigendian fix for xhci_check_bandwidth()Matt Evans2011-06-021-2/+2
| | | | | | | | | Commit 834cb0fc4712a3b21c6b8c5cb55bd13607191311 "xhci: Fix memory leak bug when dropping endpoints" added a small endian bug. This patch fixes xhci_check_bandwidth() to read add/drop_flags LE. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
* xhci: Bigendian fix for skip_isoc_td()Matt Evans2011-06-021-1/+1
| | | | | | | | | Commit 926008c9386dde09b015753b6681c502177baa30 "USB: xhci: simplify logic of skipping missed isoc TDs" added a small endian bug. This patch fixes skip_isoc_td() to read the DMA pointer correctly. Signed-off-by: Matt Evans <matt@ozlabs.org> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 16:44:06 +0100