summaryrefslogtreecommitdiffstats
path: root/drivers/usb (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usblp: do not set TASK_INTERRUPTIBLE before lockJiri Slaby2015-11-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is not permitted to set task state before lock. usblp_wwait sets the state to TASK_INTERRUPTIBLE and calls mutex_lock_interruptible. Upon return from that function, the state will be TASK_RUNNING again. This is clearly a bug and a warning is generated with LOCKDEP too: WARNING: CPU: 1 PID: 5109 at kernel/sched/core.c:7404 __might_sleep+0x7d/0x90() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa0c588d0>] usblp_wwait+0xa0/0x310 [usblp] Modules linked in: ... CPU: 1 PID: 5109 Comm: captmon Tainted: G W 4.2.5-0.gef2823b-default #1 Hardware name: LENOVO 23252SG/23252SG, BIOS G2ET33WW (1.13 ) 07/24/2012 ffffffff81a4edce ffff880236ec7ba8 ffffffff81716651 0000000000000000 ffff880236ec7bf8 ffff880236ec7be8 ffffffff8106e146 0000000000000282 ffffffff81a50119 000000000000028b 0000000000000000 ffff8802dab7c508 Call Trace: ... [<ffffffff8106e1c6>] warn_slowpath_fmt+0x46/0x50 [<ffffffff8109a8bd>] __might_sleep+0x7d/0x90 [<ffffffff8171b20f>] mutex_lock_interruptible_nested+0x2f/0x4b0 [<ffffffffa0c588fc>] usblp_wwait+0xcc/0x310 [usblp] [<ffffffffa0c58bb2>] usblp_write+0x72/0x350 [usblp] [<ffffffff8121ed98>] __vfs_write+0x28/0xf0 ... Commit 7f477358e2384c54b190cc3b6ce28277050a041b (usblp: Implement the ENOSPC convention) moved the set prior locking. So move it back after the lock. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Fixes: 7f477358e2 ("usblp: Implement the ENOSPC convention") Acked-By: Pete Zaitcev <zaitcev@yahoo.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: kconfig: fix warning of select USB_OTGPeter Chen2015-11-202-5/+2
| | | | | | | | | | | | | | | When choose randconfig for kernel build, it reports below warning: "warning: (USB_OTG_FSM && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && PM)" In fact, USB_OTG is visible symbol and depends on PM, so the driver needs to depend on it to reduce dependency problem. Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: option: add XS Stick W100-2 from 4G SystemsBjørn Mork2015-11-201-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Thomas reports " 4gsystems sells two total different LTE-surfsticks under the same name. .. The newer version of XS Stick W100 is from "omega" .. Under windows the driver switches to the same ID, and uses MI03\6 for network and MI01\6 for modem. .. echo "1c9e 9b01" > /sys/bus/usb/drivers/qmi_wwan/new_id echo "1c9e 9b01" > /sys/bus/usb-serial/drivers/option1/new_id T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b01 Rev=02.32 S: Manufacturer=USB Modem S: Product=USB Modem S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Now all important things are there: wwp0s29f7u2i3 (net), ttyUSB2 (at), cdc-wdm0 (qmi), ttyUSB1 (at) There is also ttyUSB0, but it is not usable, at least not for at. The device works well with qmi and ModemManager-NetworkManager. " Reported-by: Thomas Schäfer <tschaefer@t-online.de> Cc: <stable@vger.kernel.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-serial-4.4-rc2' of ↵Greg Kroah-Hartman2015-11-194-20/+82
|\ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.4-rc2 Here are some new device ids, support for an odd qcserial Gobi interface layout and a fix for the qcserial Huawei interface layout. Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: qcserial: Fix support for HP lt4112 LTE/HSPA+ Gobi 4G ModemBjørn Mork2015-11-161-20/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DEVICE_HWI type was added under the faulty assumption that Huawei devices based on Qualcomm chipsets and firmware use the static USB interface numbering known from Gobi devices. But this model does not apply to Huawei devices like the HP branded lt4112 (Huawei me906e). Huawei firmwares will dynamically assign interface numbers. Functions are renumbered when the firmware is reconfigured. Fix by changing the DEVICE_HWI type to use a simplified version of Huawei's subclass + protocol scheme: Blacklisting known network interface combinations and assuming the rest are serial. Reported-and-tested-by: Muri Nicanor <muri+libqmi@immerda.ch> Tested-by: Martin Hauke <mardnh@gmx.de> Cc: <stable@vger.kernel.org> Fixes: e7181d005e84 ("USB: qcserial: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem") Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: ti_usb_3410_5052: Add Honeywell HGI80 IDDavid Woodhouse2015-11-162-0/+6
| | | | | | | | | | | | | | | | | | The Honeywell HGI80 is a wireless interface to the evohome connected thermostat. It uses a TI 3410 USB-serial port. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: option: add support for Novatel MiFi USB620LAleksander Morgado2015-11-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also known as Verizon U620L. The device is modeswitched from 1410:9020 to 1410:9022 by selecting the 4th USB configuration: $ sudo usb_modeswitch –v 0x1410 –p 0x9020 –u 4 This configuration provides a ECM interface as well as TTYs ('Enterprise Mode' according to the U620 Linux integration guide). Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: qcserial: Add support for Quectel EC20 Mini PCIe modulePetr Štetiar2015-11-161-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It seems like this device has same vendor and product IDs as G2K devices, but it has different number of interfaces(4 vs 5) and also different interface layout which makes it currently unusable: usbcore: registered new interface driver qcserial usbserial: USB Serial support registered for Qualcomm USB modem usb 2-1.2: unknown number of interfaces: 5 lsusb output: Bus 002 Device 003: ID 05c6:9215 Qualcomm, Inc. Acer Gobi 2000 Wireless Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x9215 Acer Gobi 2000 Wireless Modem bcdDevice 2.32 iManufacturer 1 Quectel iProduct 2 Quectel LTE Module iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 209 bNumInterfaces 5 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 500mA Signed-off-by: Petr Štetiar <ynezz@true.cz> Cc: stable <stable@vger.kernel.org> [johan: rename define and add comment ] Signed-off-by: Johan Hovold <johan@kernel.org>
* | xhci: Fix a race in usb2 LPM resume, blocking U3 for usb2 devicesMathias Nyman2015-11-181-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clear device initiated resume variables once device is fully up and running in U0 state. Resume needs to be signaled for 20ms for usb2 devices before they can be moved to U0 state. An interrupt is triggered if a device initiates resume. As we handle the event in interrupt context we can not sleep for 20ms, so we instead set a resume flag, a timestamp, and start the roothub polling. The roothub code will later move the port to U0 when it finds a port in resume state with the resume flag set, and timestamp passed by 20ms. A host initiated resume is however not done in interrupt context, and host initiated resume code will directly signal resume, wait 20ms and then move the port to U0. These two codepaths can race, if we are in the middle of a host initated resume, while sleeping for 20ms, we may handle a port event and find the port in resume state. The port event handling code will assume the resume was device initiated and set the resume flag and timestamp. Root hub code will however not catch the port in resume state again as the host initated resume code has already moved the port to U0. The resume flag and timestamp will remain set for this port preventing port from suspending again (LPM setting port to U3) Fix this for now by always clearing the device initated resume parameters once port is in U0 Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: fix checking ep busy for CFCLu Baolu2015-11-181-26/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function ep_ring_is_processing() checks the dequeue pointer in endpoint context to know whether an endpoint is busy with processing TRBs. This is not correct since dequeue pointer field in an endpoint context is only valid when the endpoint is in Halted or Stopped states. This buggy code causes audio noise when playing sound with USB headset connected to host controllers which support CFC (one of xhci 1.1 features). This patch should exist in stable kernel since v4.3. Reported-and-tested-by: YD Tseng <yd_tseng@asmedia.com.tw> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Cc: stable <stable@vger.kernel.org> # v4.3 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: Workaround to get Intel xHCI reset working more reliablyRajmohan Mani2015-11-181-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Existing Intel xHCI controllers require a delay of 1 mS, after setting the CMD_RESET bit in command register, before accessing any HC registers. This allows the HC to complete the reset operation and be ready for HC register access. Without this delay, the subsequent HC register access, may result in a system hang, very rarely. Verified CherryView / Braswell platforms go through over 5000 warm reboot cycles (which was not possible without this patch), without any xHCI reset hang. Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: chipidea: imx: fix a possible NULL dereferenceLABBE Corentin2015-11-181-3/+8
| | | | | | | | | | | | | | | | | | of_match_device could return NULL, and so cause a NULL pointer dereference later. Reported-by: coverity (CID 1324138) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
* | usb: chipidea: usbmisc_imx: fix a possible NULL dereferenceLABBE Corentin2015-11-181-4/+6
| | | | | | | | | | | | | | | | | | | | of_match_device could return NULL, and so cause a NULL pointer dereference later. Renaming tmp_dev to of_id (like all others do) in the process. Reported-by: coverity (CID 1324135) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
* | usb: chipidea: otg: gadget module load and unload supportLi Jun2015-11-181-0/+17
| | | | | | | | | | | | | | | | | | This patch is to support load and unload gadget driver in full OTG mode. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Jiada Wang <jiada_wang@mentor.com> Cc: <stable@vger.kernel.org> #v4.0+
* | usb: chipidea: debug: disable usb irq while role switchLi Jun2015-11-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the ci->role will be set after the host role start is complete, there will be nobody cared irq during start host if usb irq enabled. This error can be reproduced on i.mx6 sololite EVK board by: 1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1 in dts. 2. boot up the board with ID cable and usb device connected. 3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role 4. echo host > /sys/kernel/debug/ci_hdrc.0/role 5. irq 212: nobody cared. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
* | usb: chipidea: imx: refine clock operations to adapt for all platformsPeter Chen2015-11-181-18/+113
| | | | | | | | | | | | | | | | | | | | Some i.mx platforms need three clocks to let controller work, but others only need one, refine clock operation to adapt for all platforms, it fixes a regression found at i.mx27. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> #v4.1+
* | usb: gadget: atmel_usba_udc: Expose correct device speedDouglas Gilbert2015-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following changes that appeared in lk 4.0.0, the gadget udc driver for some ARM based Atmel SoCs (e.g. at91sam9x5 and sama5d3 families) incorrectly deduced full-speed USB link speed even when the hardware had negotiated a high-speed link. The fix is to make sure that the UDPHS Interrupt Enable Register value does not mask the SPEED bit in the Interrupt Status Register. For a mass storage gadget this problem lead to failures when the host had a USB 3 port with the xhci_hcd driver. If the host was a USB 2 port using the ehci_hcd driver then the mass storage gadget worked (but probably at a lower speed than it should have). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: <stable@vger.kernel.org> #4.0+ Fixes: 9870d895ad87 ("usb: atmel_usba_udc: Mask status with enabled irqs") Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb: enable usb_dma parameterBin Liu2015-11-171-1/+1
| | | | | | | | | | | | | | | | Change the permission of usb_dma parameter so it can be used for runtime debug without reboot. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: phy: phy-mxs-usb: fix a possible NULL dereferenceLABBE Corentin2015-11-171-2/+5
| | | | | | | | | | | | | | | | of_match_device could return NULL, and so cause a NULL pointer dereference later. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: dwc3: gadget: let us set lower max_speedBen McCauley2015-11-171-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some SoCs, dwc3 is implemented as a USB2.0 only core, meaning that it can't ever achieve SuperSpeed. Currect driver always sets gadget.max_speed to USB_SPEED_SUPER unconditionally. This can causes issues to some Host stacks where the host will issue a GetBOS() request and we will reply with a BOS containing Superspeed Capability Descriptor. At least Windows seems to be upset by this fact and prints a warning that we should connect $this device to another port. [ balbi@ti.com : rewrote entire commit, including source code comment to make a lot clearer what the problem is ] Cc: <stable@vger.kernel.org> Signed-off-by: Ben McCauley <ben.mccauley@garmin.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb: fix tx fifo flush handlingBin Liu2015-11-171-6/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Here are a few changes in musb_h_tx_flush_fifo(). - It has been observed that sometimes (if not always) musb is unable to flush tx fifo during urb dequeue when disconnect a device. But it seems to be harmless, since the tx fifo flush is done again in musb_ep_program() when re-use the hw_ep. But the WARN() floods the console in the case when multiple tx urbs are queued, so change it to dev_WARN_ONCE(). - applications could queue up many tx urbs, then the 1ms delay could causes minutes of delay in device disconnect. So remove it to get better user experience. The 1ms delay does not help the flushing anyway. - cleanup the debug code - related to lastcsr. ---- Note: The tx fifo flush issue has been observed during device disconnect on AM335x. To reproduce the issue, ensure tx urb(s) are queued when unplug the usb device which is connected to AM335x usb host port. I found using a usb-ethernet device and running iperf (client on AM335x) has very high chance to trigger the problem. Better to turn on dev_dbg() in musb_cleanup_urb() with CPPI enabled to see the issue when aborting the tx channel. Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: gadget: f_loopback: fix the warning during the enumerationPeter Chen2015-11-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code tries to allocate memory with GFP_KERNEL at interrupt context, it would show below warning during the enumeration when I test it with chipidea hardware, change GFP flag as GFP_ATOMIC can fix this issue. [ 40.438237] zero gadget: high-speed config #2: loopback [ 40.444924] ------------[ cut here ]------------ [ 40.449609] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:2755 lockdep_trace_alloc+0x108/0x128() [ 40.461715] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [ 40.467130] Modules linked in: [ 40.470216] usb_f_ss_lb g_zero libcomposite evbug [ 40.473822] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.3.0-rc5-00168-gb730aaf #604 [ 40.481496] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 40.487345] Backtrace: [ 40.489857] [<80014e94>] (dump_backtrace) from [<80015088>] (show_stack+0x18/0x1c) [ 40.497445] r6:80b67a80 r5:00000000 r4:00000000 r3:00000000 [ 40.503234] [<80015070>] (show_stack) from [<802e27b4>] (dump_stack+0x8c/0xa4) [ 40.510503] [<802e2728>] (dump_stack) from [<8002cfe8>] (warn_slowpath_common+0x80/0xbc) [ 40.518612] r6:8007510c r5:00000009 r4:80b49c88 r3:00000001 [ 40.524396] [<8002cf68>] (warn_slowpath_common) from [<8002d05c>] (warn_slowpath_fmt+0x38/0x40) [ 40.533109] r8:bcfdef80 r7:bdb705cc r6:000080d0 r5:be001e80 r4:809cc278 [ 40.539965] [<8002d028>] (warn_slowpath_fmt) from [<8007510c>] (lockdep_trace_alloc+0x108/0x128) [ 40.548766] r3:809d0128 r2:809cc278 [ 40.552401] r4:600b0193 [ 40.554990] [<80075004>] (lockdep_trace_alloc) from [<801093d4>] (kmem_cache_alloc+0x28/0x15c) [ 40.563618] r4:000080d0 r3:80b4aa8c [ 40.567270] [<801093ac>] (kmem_cache_alloc) from [<804d95e4>] (ep_alloc_request+0x58/0x68) [ 40.575550] r10:7f01f104 r9:00000001 r8:bcfdef80 r7:bdb705cc r6:bc178700 r5:00000000 [ 40.583512] r4:bcfdef80 r3:813c0a38 [ 40.587183] [<804d958c>] (ep_alloc_request) from [<7f01f7ec>] (loopback_set_alt+0x114/0x21c [usb_f_ss_lb]) [ 40.596929] [<7f01f6d8>] (loopback_set_alt [usb_f_ss_lb]) from [<7f006910>] (composite_setup+0xbd0/0x17e8 [libcomposite]) [ 40.607902] r10:bd3a2c0c r9:00000000 r8:bcfdef80 r7:bc178700 r6:bdb702d0 r5:bcfdefdc [ 40.615866] r4:7f0199b4 r3:00000002 [ 40.619542] [<7f005d40>] (composite_setup [libcomposite]) from [<804dae88>] (udc_irq+0x784/0xd1c) [ 40.628431] r10:80bb5619 r9:c0876140 r8:00012001 r7:bdb71010 r6:bdb70568 r5:00010001 [ 40.636392] r4:bdb70014 [ 40.638985] [<804da704>] (udc_irq) from [<804d64f8>] (ci_irq+0x5c/0x118) [ 40.645702] r10:80bb5619 r9:be11e000 r8:00000117 r7:00000000 r6:bdb71010 r5:be11e060 [ 40.653666] r4:bdb70010 [ 40.656261] [<804d649c>] (ci_irq) from [<8007f638>] (handle_irq_event_percpu+0x7c/0x13c) [ 40.664367] r6:00000000 r5:be11e060 r4:bdb05cc0 r3:804d649c [ 40.670149] [<8007f5bc>] (handle_irq_event_percpu) from [<8007f740>] (handle_irq_event+0x48/0x6c) [ 40.679036] r10:00000000 r9:be008000 r8:00000001 r7:00000000 r6:bdb05cc0 r5:be11e060 [ 40.686998] r4:be11e000 [ 40.689581] [<8007f6f8>] (handle_irq_event) from [<80082850>] (handle_fasteoi_irq+0xd4/0x1b0) [ 40.698120] r6:80b56a30 r5:be11e060 r4:be11e000 r3:00000000 [ 40.703898] [<8008277c>] (handle_fasteoi_irq) from [<8007ec04>] (generic_handle_irq+0x28/0x3c) [ 40.712524] r7:00000000 r6:80b4aaf4 r5:00000117 r4:80b445fc [ 40.718304] [<8007ebdc>] (generic_handle_irq) from [<8007ef20>] (__handle_domain_irq+0x6c/0xe8) [ 40.727033] [<8007eeb4>] (__handle_domain_irq) from [<800095d4>] (gic_handle_irq+0x48/0x94) [ 40.735402] r9:c080f100 r8:80b4ac6c r7:c080e100 r6:80b67d40 r5:80b49f00 r4:c080e10c [ 40.743290] [<8000958c>] (gic_handle_irq) from [<80015d38>] (__irq_svc+0x58/0x78) [ 40.750791] Exception stack(0x80b49f00 to 0x80b49f48) [ 40.755873] 9f00: 00000001 00000001 00000000 80024320 80b48000 80b4a9d0 80b4a984 80b433e4 [ 40.764078] 9f20: 00000001 807f4680 00000000 80b49f5c 80b49f20 80b49f50 80071ca4 800113fc [ 40.772272] 9f40: 200b0013 ffffffff [ 40.775776] r9:807f4680 r8:00000001 r7:80b49f34 r6:ffffffff r5:200b0013 r4:800113fc [ 40.783677] [<800113d4>] (arch_cpu_idle) from [<8006c5bc>] (default_idle_call+0x28/0x38) [ 40.791798] [<8006c594>] (default_idle_call) from [<8006c6dc>] (cpu_startup_entry+0x110/0x1b0) [ 40.800445] [<8006c5cc>] (cpu_startup_entry) from [<807e95dc>] (rest_init+0x12c/0x168) [ 40.808376] r7:80b4a8c0 r3:807f4b7c [ 40.812030] [<807e94b0>] (rest_init) from [<80ad7cc0>] (start_kernel+0x360/0x3d4) [ 40.819528] r5:80bcb000 r4:80bcb050 [ 40.823171] [<80ad7960>] (start_kernel) from [<8000807c>] (0x8000807c) It fixes commit 91c42b0da8e3 ("usb: gadget: loopback: Fix looping back logic implementation"). Cc: <stable@vger.kernel.org> # v3.18+ Signed-off-by: Peter Chen <peter.chen@freescale.com> Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: dwc2: host: Fix remote wakeup when not in DWC2_L2Douglas Anderson2015-11-171-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In commit 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state") we changed dwc2_port_suspend() not to set the lx_state anymore (instead it sets the new bus_suspended variable). This introduced a bug where we would fail to detect device insertions if: 1. Plug empty hub into dwc2 2. Plug USB flash drive into the empty hub. 3. Wait a few seconds 4. Unplug USB flash drive 5. Less than 2 seconds after step 4, plug the USB flash drive in again. The dwc2_hcd_rem_wakeup() function should have been changed to look at the new bus_suspended variable. Let's fix it. Since commit b46146d59fda ("usb: dwc2: host: resume root hub on remote wakeup") talks about needing the root hub resumed if the bus was suspended, we'll include it in our test. It appears that the "port_l1_change" should only be set to 1 if we were in DWC2_L1 (the driver currently never sets this), so we'll update the former "else" case based on this test. Fixes: 734643dfbdde ("usb: dwc2: host: add flag to reflect bus state") Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Gregory Herrero <gregory.herrero@intel.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: dwc2: host: Fix ahbcfg for rk3066Douglas Anderson2015-11-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The comment for ahbcfg for rk3066 parameters (also used for rk3288) claimed that ahbcfg was INCR16, but it wasn't. Since the bits weren't shifted properly, the 0x7 ended up being masked and we ended up programming 0x3 for the HBstLen. Let's set it to INCR16 properly. As per Wu Liang Feng at Rockchip this may increase transmission efficiency. I did blackbox tests with writing 0s to a USB-based SD reader (forcefully capping CPU Freq to try to measure efficiency): cd /sys/devices/system/cpu/cpu0/cpufreq echo userspace > scaling_governor echo 126000 > scaling_setspeed for i in $(seq 10); do dd if=/dev/zero of=/dev/sdb bs=1M count=750 done With the above tests I found that speeds went from ~15MB/s to ~18MB/s. Note that most other tests I did (including reading from the same USB reader) didn't show any difference in performance. Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: John Youn <johnyoun@synopsys.com> Reviewed-by: Liangfeng Wu <wulf@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: phy: omap-otg: fix uninitialized pointerAaro Koskinen2015-11-161-1/+1
| | | | | | | | | | | | | | | | | | | | otg_dev->extcon was referenced before otg_dev was initialized. Fix. Cc: <stable@vger.kernel.org> # v4.3 Fixes: a2fd2423240f ("usb: phy: omap-otg: Replace deprecated API of extcon") Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: musb: core: fix order of arguments to ulpi write callbackUwe Kleine-König2015-11-161-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a bit of a mess in the order of arguments to the ulpi write callback. There is int ulpi_write(struct ulpi *ulpi, u8 addr, u8 val) in drivers/usb/common/ulpi.c; struct usb_phy_io_ops { ... int (*write)(struct usb_phy *x, u32 val, u32 reg); } in include/linux/usb/phy.h. The callback registered by the musb driver has to comply to the latter, but up to now had "offset" first which effectively made the function broken for correct users. So flip the order and while at it also switch to the parameter names of struct usb_phy_io_ops's write. Fixes: ffb865b1e460 ("usb: musb: add ulpi access operations") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
* | usb: dwc3: pci: add support for Intel Broxton SOCHeikki Krogerus2015-11-161-0/+4
|/ | | | | | | PCI IDs for Broxton based platforms. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2015-11-141-5/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull final round of SCSI updates from James Bottomley: "Sorry for the delay in this patch which was mostly caused by getting the merger of the mpt2/mpt3sas driver, which was seen as an essential item of maintenance work to do before the drivers diverge too much. Unfortunately, this caused a compile failure (detected by linux-next), which then had to be fixed up and incubated. In addition to the mpt2/3sas rework, there are updates from pm80xx, lpfc, bnx2fc, hpsa, ipr, aacraid, megaraid_sas, storvsc and ufs plus an assortment of changes including some year 2038 issues, a fix for a remove before detach issue in some drivers and a couple of other minor issues" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits) mpt3sas: fix inline markers on non inline function declarations sd: Clear PS bit before Mode Select. ibmvscsi: set max_lun to 32 ibmvscsi: display default value for max_id, max_lun and max_channel. mptfusion: don't allow negative bytes in kbuf_alloc_2_sgl() scsi: pmcraid: replace struct timeval with ktime_get_real_seconds() mvumi: 64bit value for seconds_since1970 be2iscsi: Fix bogus WARN_ON length check scsi_scan: don't dump trace when scsi_prep_async_scan() is called twice mpt3sas: Bump mpt3sas driver version to 09.102.00.00 mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs mpt2sas, mpt3sas: Update the driver versions mpt3sas: setpci reset kernel oops fix mpt3sas: Added OEM Gen2 PnP ID branding names mpt3sas: Refcount fw_events and fix unsafe list usage mpt3sas: Refcount sas_device objects and fix unsafe list usage mpt3sas: sysfs attribute to report Backup Rail Monitor Status mpt3sas: Ported WarpDrive product SSS6200 support mpt3sas: fix for driver fails EEH, recovery from injected pci bus error mpt3sas: Manage MSI-X vectors according to HBA device type ...
| * scsi: use host wide tags by defaultChristoph Hellwig2015-11-101-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes the !blk-mq path to the same defaults as the blk-mq I/O path by always enabling block tagging, and always using host wide tags. We've had blk-mq available for a few releases so bugs with this mode should have been ironed out, and this ensures we get better coverage of over tagging setup over different configs. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* | Merge branch 'for-next' of ↵Linus Torvalds2015-11-1421-822/+492
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "This series contains HCH's changes to absorb configfs attribute ->show() + ->store() function pointer usage from it's original tree-wide consumers, into common configfs code. It includes usb-gadget, target w/ drivers, netconsole and ocfs2 changes to realize the improved simplicity, that now renders the original include/target/configfs_macros.h CPP magic for fabric drivers and others, unnecessary and obsolete. And with common code in place, new configfs attributes can be added easier than ever before. Note, there are further improvements in-flight from other folks for v4.5 code in configfs land, plus number of target fixes for post -rc1 code" In the meantime, a new user of the now-removed old configfs API came in through the char/misc tree in commit 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices"). This merge resolution comes from Alexander Shishkin, who updated his stm class tracing abstraction to account for the removal of the old show_attribute and store_attribute methods in commit 517982229f78 ("configfs: remove old API") from this pull. As Alexander says about that patch: "There's no need to keep an extra wrapper structure per item and the awkward show_attribute/store_attribute item ops are no longer needed. This patch converts policy code to the new api, all the while making the code quite a bit smaller and easier on the eyes. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>" That patch was folded into the merge so that the tree should be fully bisectable. * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits) configfs: remove old API ocfs2/cluster: use per-attribute show and store methods ocfs2/cluster: move locking into attribute store methods netconsole: use per-attribute show and store methods target: use per-attribute show and store methods spear13xx_pcie_gadget: use per-attribute show and store methods dlm: use per-attribute show and store methods usb-gadget/f_serial: use per-attribute show and store methods usb-gadget/f_phonet: use per-attribute show and store methods usb-gadget/f_obex: use per-attribute show and store methods usb-gadget/f_uac2: use per-attribute show and store methods usb-gadget/f_uac1: use per-attribute show and store methods usb-gadget/f_mass_storage: use per-attribute show and store methods usb-gadget/f_sourcesink: use per-attribute show and store methods usb-gadget/f_printer: use per-attribute show and store methods usb-gadget/f_midi: use per-attribute show and store methods usb-gadget/f_loopback: use per-attribute show and store methods usb-gadget/ether: use per-attribute show and store methods usb-gadget/f_acm: use per-attribute show and store methods usb-gadget/f_hid: use per-attribute show and store methods ...
| * | target: use per-attribute show and store methodsChristoph Hellwig2015-10-141-25/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also allows to remove the target-specific old configfs macros, and gets rid of the target_core_fabric_configfs.h header which only had one function declaration left that could be moved to a better place. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org> Acked-by: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_serial: use per-attribute show and store methodsChristoph Hellwig2015-10-141-22/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_phonet: use per-attribute show and store methodsChristoph Hellwig2015-10-141-21/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_obex: use per-attribute show and store methodsChristoph Hellwig2015-10-141-22/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_uac2: use per-attribute show and store methodsChristoph Hellwig2015-10-141-17/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_uac1: use per-attribute show and store methodsChristoph Hellwig2015-10-141-23/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_mass_storage: use per-attribute show and store methodsChristoph Hellwig2015-10-141-73/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_sourcesink: use per-attribute show and store methodsChristoph Hellwig2015-10-141-47/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_printer: use per-attribute show and store methodsChristoph Hellwig2015-10-141-18/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_midi: use per-attribute show and store methodsChristoph Hellwig2015-10-141-21/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_loopback: use per-attribute show and store methodsChristoph Hellwig2015-10-141-19/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/ether: use per-attribute show and store methodsChristoph Hellwig2015-10-146-46/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_acm: use per-attribute show and store methodsChristoph Hellwig2015-10-141-22/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/f_hid: use per-attribute show and store methodsChristoph Hellwig2015-10-141-20/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget/uvc: use per-attribute show and store methodsChristoph Hellwig2015-10-141-244/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UVC is a little different from other configfs consumers in that it wants different function and field names from the exposed attribute name, so it keeps it's local macros to define attributes instead of using the common ones. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | usb-gadget: use per-attribute show and store methodsChristoph Hellwig2015-10-141-182/+113
| |/ | | | | | | | | | | | | | | | | | | To simplify the configfs interface and remove boilerplate code that also causes binary bloat. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* | dma: remove external references to dma_supportedChristoph Hellwig2015-11-103-3/+3
| | | | | | | | | | | | | | | | Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'akpm' (patches from Andrew)Linus Torvalds2015-11-072-4/+2
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge second patch-bomb from Andrew Morton: - most of the rest of MM - procfs - lib/ updates - printk updates - bitops infrastructure tweaks - checkpatch updates - nilfs2 update - signals - various other misc bits: coredump, seqfile, kexec, pidns, zlib, ipc, dma-debug, dma-mapping, ... * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (102 commits) ipc,msg: drop dst nil validation in copy_msg include/linux/zutil.h: fix usage example of zlib_adler32() panic: release stale console lock to always get the logbuf printed out dma-debug: check nents in dma_sync_sg* dma-mapping: tidy up dma_parms default handling pidns: fix set/getpriority and ioprio_set/get in PRIO_USER mode kexec: use file name as the output message prefix fs, seqfile: always allow oom killer seq_file: reuse string_escape_str() fs/seq_file: use seq_* helpers in seq_hex_dump() coredump: change zap_threads() and zap_process() to use for_each_thread() coredump: ensure all coredumping tasks have SIGNAL_GROUP_COREDUMP signal: remove jffs2_garbage_collect_thread()->allow_signal(SIGCONT) signal: introduce kernel_signal_stop() to fix jffs2_garbage_collect_thread() signal: turn dequeue_signal_lock() into kernel_dequeue_signal() signals: kill block_all_signals() and unblock_all_signals() nilfs2: fix gcc uninitialized-variable warnings in powerpc build nilfs2: fix gcc unused-but-set-variable warnings MAINTAINERS: nilfs2: add header file for tracing nilfs2: add tracepoints for analyzing reading and writing metadata files ...
| * | signal: turn dequeue_signal_lock() into kernel_dequeue_signal()Oleg Nesterov2015-11-071-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Rename dequeue_signal_lock() to kernel_dequeue_signal(). This matches another "for kthreads only" kernel_sigaction() helper. 2. Remove the "tsk" and "mask" arguments, they are always current and current->blocked. And it is simply wrong if tsk != current. 3. We could also remove the 3rd "siginfo_t *info" arg but it looks potentially useful. However we can simplify the callers if we change kernel_dequeue_signal() to accept info => NULL. 4. Remove _irqsave, it is never called from atomic context. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Tejun Heo <tj@kernel.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Felipe Balbi <balbi@ti.com> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | mm, page_alloc: distinguish between being unable to sleep, unwilling to ↵Mel Gorman2015-11-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sleep and avoiding waking kswapd __GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 21:44:06 +0100