summaryrefslogtreecommitdiffstats
path: root/drivers/usb (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: phy: generic: Get the vbus supplySean Anderson2022-04-261-0/+7
| | | | | | | | | | | | While support for working with a vbus was added, the regulator was never actually gotten (despite what was documented). Fix this by actually getting the supply from the device tree. Fixes: 7acc9973e3c4 ("usb: phy: generic: add vbus support") Cc: stable <stable@kernel.org> Signed-off-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/20220425171412.1188485-3-sean.anderson@seco.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc3: gadget: Return proper request statusThinh Nguyen2022-04-261-1/+30
| | | | | | | | | | | | | | | | | If the user sets the usb_request's no_interrupt, then there will be no completion event for the request. Currently the driver incorrectly uses the event status of a different request to report the status for a request with no_interrupt. The dwc3 driver needs to check the TRB status associated with the request when reporting its status. Note: this is only applicable to missed_isoc TRB completion status, but the other status are also listed for completeness/documentation. Fixes: 6d8a019614f3 ("usb: dwc3: gadget: check for Missed Isoc from event status") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/db2c80108286cfd108adb05bad52138b78d7c3a7.1650673655.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc3: pci: add support for the Intel Meteor Lake-PHeikki Krogerus2022-04-261-0/+8
| | | | | | | | | | This patch adds the necessary PCI IDs for Intel Meteor Lake-P devices. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220425103518.44028-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-serial-5.18-rc4' of ↵Greg Kroah-Hartman2022-04-233-3/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.18-rc4 Here's a fix for a potential overflow issue in the whiteheat driver when using the old ARM ABI. Included are also some new modem device ids. All have been in linux-next with no reported issues. * tag 'usb-serial-5.18-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader USB: serial: option: add support for Cinterion MV32-WA/MV32-WB USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
| * USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTSKees Cook2022-04-211-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n due to "-mabi=apcs-gnu", even though it has a single u8: whiteheat_private { __u8 mcr; /* 0 1 */ /* size: 4, cachelines: 1, members: 1 */ /* padding: 3 */ /* last cacheline: 4 bytes */ }; The result is technically harmless, as both the source and the destinations are currently the same allocation size (4 bytes) and don't use their padding, but if anything were to ever be added after the "mcr" member in "struct whiteheat_private", it would be overwritten. The structs both have a single u8 "mcr" member, but are 4 bytes in padded size. The memcpy() destination was explicitly targeting the u8 member (size 1) with the length of the whole structure (size 4), triggering the memcpy buffer overflow warning: In file included from include/linux/string.h:253, from include/linux/bitmap.h:11, from include/linux/cpumask.h:12, from include/linux/smp.h:13, from include/linux/lockdep.h:14, from include/linux/spinlock.h:62, from include/linux/mmzone.h:8, from include/linux/gfp.h:6, from include/linux/slab.h:15, from drivers/usb/serial/whiteheat.c:17: In function 'fortify_memcpy_chk', inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4: include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 328 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Instead, just assign the one byte directly. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: cp210x: add PIDs for Kamstrup USB Meter ReaderBruno Thomsen2022-04-201-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wireless reading of water and heat meters using 868 MHz wM-Bus mode C1. The two different product IDs allow detection of dongle antenna solution: - Internal antenna - External antenna using SMA connector https://www.kamstrup.com/en-en/water-solutions/water-meter-reading/usb-meter-reader Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20220414081202.5591-1-bruno.thomsen@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: option: add support for Cinterion MV32-WA/MV32-WBSlark Xiao2022-04-201-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Cinterion device MV32-WA/MV32-WB. MV32-WA PID is 0x00F1, and MV32-WB PID is 0x00F2. Test evidence as below: T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f1 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F1 USB Mobile Broadband S: SerialNumber=78ada8c4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=1e2d ProdID=00f2 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F2 USB Mobile Broadband S: SerialNumber=cdd06a78 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Interface 0&1: MBIM, 2:Modem, 3: GNSS, 4: NMEA, 5: Diag GNSS port don't use serial driver. Signed-off-by: Slark Xiao <slark_xiao@163.com> Link: https://lore.kernel.org/r/20220414074434.5699-1-slark_xiao@163.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
| * USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositionsDaniele Palmas2022-04-111-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the following Telit FN980 and FN990 compositions: 0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty 0x1058: tty, adb, tty, tty, tty, tty, tty 0x1075: adb, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20220406141408.580669-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
* | usb: dwc3: core: Only handle soft-reset in DCTLThinh Nguyen2022-04-221-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Make sure not to set run_stop bit or link state change request while initiating soft-reset. Register read-modify-write operation may unintentionally start the controller before the initialization completes with its previous DCTL value, which can cause initialization failure. Fixes: f59dcab17629 ("usb: dwc3: core: improve reset sequence") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/6aecbd78328f102003d40ccf18ceeebd411d3703.1650594792.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()Vijayavardhan Vennapusa2022-04-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If any function like UVC is deactivating gadget as part of composition switch which results in not calling pullup enablement, it is not getting enabled after switch to new composition due to this deactivation flag not cleared. This results in USB enumeration not happening after switch to new USB composition. Hence clear deactivation flag inside gadget structure in configfs_composite_unbind() before switch to new USB composition. Signed-off-by: Vijayavardhan Vennapusa <vvreddy@codeaurora.org> Signed-off-by: Dan Vacura <w36195@motorola.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220413211038.72797-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: misc: eud: Fix an error handling path in eud_probe()Christophe JAILLET2022-04-211-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is odd to call devm_add_action_or_reset() before calling the function that should be undone. Either, the "_or_reset" part should be omitted, or the action should be recorded after the resources have been allocated. Switch the order of devm_add_action_or_reset() and usb_role_switch_get(). Fixes: 9a1bf58ccd44 ("usb: misc: eud: Add driver support for Embedded USB Debugger(EUD)") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/362908699275ecec078381b42d87c817c6965fc6.1648979948.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: core: Don't hold the device lock while sleeping in do_proc_control()Tasos Sahanidis2022-04-211-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit ae8709b296d8 ("USB: core: Make do_proc_control() and do_proc_bulk() killable") if a device has the USB_QUIRK_DELAY_CTRL_MSG quirk set, it will temporarily block all other URBs (e.g. interrupts) while sleeping due to a control. This results in noticeable delays when, for example, a userspace usbfs application is sending URB interrupts at a high rate to a keyboard and simultaneously updates the lock indicators using controls. Interrupts with direction set to IN are also affected by this, meaning that delivery of HID reports (containing scancodes) to the usbfs application is delayed as well. This patch fixes the regression by calling msleep() while the device mutex is unlocked, as was the case originally with usb_control_msg(). Fixes: ae8709b296d8 ("USB: core: Make do_proc_control() and do_proc_bulk() killable") Cc: stable <stable@kernel.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Link: https://lore.kernel.org/r/3e299e2a-13b9-ddff-7fee-6845e868bc06@tasossah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: dwc3: Try usb-role-switch first in dwc3_drd_initSven Peter2022-04-211-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the PHY controller node has a "port" dwc3 tries to find an extcon device even when "usb-role-switch" is present. This happens because dwc3_get_extcon() sees that "port" node and then calls extcon_find_edev_by_node() which will always return EPROBE_DEFER in that case. On the other hand, even if an extcon was present and dwc3_get_extcon() was successful it would still be ignored in favor of "usb-role-switch". Let's just first check if "usb-role-switch" is configured in the device tree and directly use it instead and only try to look for an extcon device otherwise. Fixes: 8a0a13799744 ("usb: dwc3: Registering a role switch in the DRD code.") Cc: stable <stable@kernel.org> Signed-off-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220411155300.9766-1-sven@svenpeter.dev Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: dwc3: core: Fix tx/rx threshold settingsThinh Nguyen2022-04-211-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The current driver logic checks against 0 to determine whether the periodic tx/rx threshold settings are set, but we may get bogus values from uninitialized variables if no device property is set. Properly default these variables to 0. Fixes: 938a5ad1d305 ("usb: dwc3: Check for ESS TX/RX threshold config") Cc: <stable@vger.kernel.org> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/cccfce990b11b730b0dae42f9d217dc6fb988c90.1649727139.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: mtu3: fix USB 3.0 dual-role-switch from device to hostMacpaul Lin2022-04-211-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue description: When an OTG port has been switched to device role and then switch back to host role again, the USB 3.0 Host (XHCI) will not be able to detect "plug in event of a connected USB 2.0/1.0 ((Highspeed and Fullspeed) devices until system reboot. Root cause and Solution: There is a condition checking flag "ssusb->otg_switch.is_u3_drd" in toggle_opstate(). At the end of role switch procedure, toggle_opstate() will be called to set DC_SESSION and SOFT_CONN bit. If "is_u3_drd" was set and switched the role to USB host 3.0, bit DC_SESSION and SOFT_CONN will be skipped hence caused the port cannot detect connected USB 2.0 (Highspeed and Fullspeed) devices. Simply remove the condition check to solve this issue. Fixes: d0ed062a8b75 ("usb: mtu3: dual-role mode support") Cc: stable@vger.kernel.org Tested-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com> Signed-off-by: Tainping Fang <tianping.fang@mediatek.com> Link: https://lore.kernel.org/r/20220419081245.21015-1-macpaul.lin@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: Enable runtime PM on second Alderlake controllerEvan Green2022-04-211-1/+3
| | | | | | | | | | | | | | | | | | | | | | Alderlake has two XHCI controllers with PCI IDs 0x461e and 0x51ed. We had previously added the quirk to default enable runtime PM for 0x461e, now add it for 0x51ed as well. Signed-off-by: Evan Green <evgreen@chromium.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220408114225.1.Ibcff6b86ed4eacfe4c4bc89c90e18416f3900a3e@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: dwc3: fix backwards compat with rockchip devicesPeter Geis2022-04-211-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 33fb697ec7e5 ("usb: dwc3: Get clocks individually") moved from the clk_bulk api to individual clocks, following the snps,dwc3.yaml dt-binding for clock names. Unfortunately the rk3328 (and upcoming rk356x support) use the rockchip,dwc3.yaml which has different clock names, which are common on devices using the glue layer. The rk3328 does not use a glue layer, but attaches directly to the dwc3 core driver. The offending patch series failed to account for this, thus dwc3 was broken on rk3328. To retain backwards compatibility with rk3328 device trees we must also check for the alternate clock names. Fixes: 33fb697ec7e5 ("usb: dwc3: Get clocks individually") Reported-by: Frank Wunderlich <frank-w@public-files.de> Tested-By: Frank Wunderlich <frank-w@public-files.de> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220409152116.3834354-1-pgwipeout@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: misc: fix improper handling of refcount in uss720_probe()Hangyu Hua2022-04-211-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | usb_put_dev shouldn't be called when uss720_probe succeeds because of priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL before destroy_priv in uss720_disconnect because usb_put_dev is in destroy_priv. Fix this by moving priv->usbdev = NULL after usb_put_dev. Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe") Cc: stable <stable@kernel.org> Reviewed-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Link: https://lore.kernel.org/r/20220407024001.11761-1-hbh25y@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: Fix ehci infinite suspend-resume loop issue in zhaoxinWeitao Wango2022-04-213-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In zhaoxin platform, some ehci projects will latch a wakeup signal internal when plug in a device on port during system S0. This wakeup signal will turn on when ehci runtime suspend, which will trigger a system control interrupt that will resume ehci back to D0. As no device connect, ehci will be set to runtime suspend and turn on the internal latched wakeup signal again. It will cause a suspend-resume loop and generate system control interrupt continuously. Fixed this issue by clear wakeup signal latched in ehci internal when ehci resume callback is called. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Link: https://lore.kernel.org/r/20220324121735.3803-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLYRen Zhijie2022-04-211-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Building without CONFIG_POWER_SUPPLY will fail: drivers/usb/typec/rt1719.o: In function `rt1719_psy_set_property': rt1719.c:(.text+0x10a): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/rt1719.o: In function `rt1719_psy_get_property': rt1719.c:(.text+0x2c8): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/rt1719.o: In function `devm_rt1719_psy_register': rt1719.c:(.text+0x3e9): undefined reference to `devm_power_supply_register' drivers/usb/typec/rt1719.o: In function `rt1719_irq_handler': rt1719.c:(.text+0xf9f): undefined reference to `power_supply_changed' drivers/usb/typec/rt1719.o: In function `rt1719_update_pwr_opmode.part.9': rt1719.c:(.text+0x657): undefined reference to `power_supply_changed' drivers/usb/typec/rt1719.o: In function `rt1719_attach': rt1719.c:(.text+0x83e): undefined reference to `power_supply_changed' Add POWER_SUPPLY dependency to Kconfig. Fixes: 25d29b980912 ("usb: typec: rt1719: Add support for Richtek RT1719") Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: ChiYuan Huang <cy_huang@richtek.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Link: https://lore.kernel.org/r/20220418082425.41566-1-renzhijie2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: typec: ucsi: Fix role swappingHeikki Krogerus2022-04-211-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All attempts to swap the roles timed out because the completion was done without releasing the port lock. Fixing that by releasing the lock before starting to wait for the completion. Link: https://lore.kernel.org/linux-usb/037de7ac-e210-bdf5-ec7a-8c0c88a0be20@gmail.com/ Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: stable@vger.kernel.org Reported-and-tested-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220405134824.68067-3-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: typec: ucsi: Fix reuse of completion structureHeikki Krogerus2022-04-211-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The role swapping completion variable is reused, so it needs to be reinitialised every time. Otherwise it will be marked as done after the first time it's used and completing immediately. Link: https://lore.kernel.org/linux-usb/20220325203959.GA19752@jackp-linux.qualcomm.com/ Fixes: 6df475f804e6 ("usb: typec: ucsi: Start using struct typec_operations") Cc: stable@vger.kernel.org Reported-and-suggested-by: Jack Pham <quic_jackp@quicinc.com> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220405134824.68067-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: xhci: tegra:Fix PM usage reference leak of ↵zhangqilong2022-04-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tegra_xusb_unpowergate_partitions pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 41a7426d25fa ("usb: xhci: tegra: Unlink power domain devices") Cc: stable <stable@vger.kernel.org> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20220319023822.145641-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: gadget: uvc: Fix crash when encoding data for usb requestDan Vacura2022-04-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During the uvcg_video_pump() process, if an error occurs and uvcg_queue_cancel() is called, the buffer queue will be cleared out, but the current marker (queue->buf_used) of the active buffer (no longer active) is not reset. On the next iteration of uvcg_video_pump() the stale buf_used count will be used and the logic of min((unsigned int)len, buf->bytesused - queue->buf_used) may incorrectly calculate a nbytes size, causing an invalid memory access. [80802.185460][ T315] configfs-gadget gadget: uvc: VS request completed with status -18. [80802.185519][ T315] configfs-gadget gadget: uvc: VS request completed with status -18. ... uvcg_queue_cancel() is called and the queue is cleared out, but the marker queue->buf_used is not reset. ... [80802.262328][ T8682] Unable to handle kernel paging request at virtual address ffffffc03af9f000 ... ... [80802.263138][ T8682] Call trace: [80802.263146][ T8682] __memcpy+0x12c/0x180 [80802.263155][ T8682] uvcg_video_pump+0xcc/0x1e0 [80802.263165][ T8682] process_one_work+0x2cc/0x568 [80802.263173][ T8682] worker_thread+0x28c/0x518 [80802.263181][ T8682] kthread+0x160/0x170 [80802.263188][ T8682] ret_from_fork+0x10/0x18 [80802.263198][ T8682] Code: a8c12829 a88130cb a8c130 Fixes: d692522577c0 ("usb: gadget/uvc: Port UVC webcam gadget to use videobuf2 framework") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20220331184024.23918-1-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: quirks: add STRING quirk for VCOM deviceOliver Neukum2022-04-141-0/+3
| | | | | | | | | | | | | | | | | | This has been reported to stall if queried Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414123152.1700-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: quirks: add a Realtek card readerOliver Neukum2022-04-141-0/+3
| | | | | | | | | | | | | | | | | | This device is reported to stall when enummerated. Cc: stable <stable@vger.kernel.org> Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20220414110209.30924-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: cdns3: Fix issue for clear halt endpointPawel Laszczak2022-04-091-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Path fixes bug which occurs during resetting endpoint in __cdns3_gadget_ep_clear_halt function. During resetting endpoint controller will change HW/DMA owned TRB. It set Abort flag in trb->control and will change trb->length field. If driver want to use the aborted trb it must update the changed field in TRB. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220329084605.4022-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: increase usb U3 -> U0 link resume timeout from 100ms to 500msMathias Nyman2022-04-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first U3 wake signal by the host may be lost if the USB 3 connection is tunneled over USB4, with a runtime suspended USB4 host, and firmware implemented connection manager. Specs state the host must wait 100ms (tU3WakeupRetryDelay) before resending a U3 wake signal if device doesn't respond, leading to U3 -> U0 link transition times around 270ms in the tunneled case. Fixes: 0200b9f790b0 ("xhci: Wait until link state trainsits to U0 after setting USB_SS_PORT_LS_U0") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | xhci: stop polling roothubs after shutdownHenry Lin2022-04-091-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While rebooting, XHCI controller and its bus device will be shut down in order by .shutdown callback. Stopping roothubs polling in xhci_shutdown() can prevent XHCI driver from accessing port status after its bus device shutdown. Take PCIe XHCI controller as example, if XHCI driver doesn't stop roothubs polling, XHCI driver may access PCIe BAR register for port status after parent PCIe root port driver is shutdown and cause PCIe bus error. [check shared hcd exist before stopping its roothub polling -Mathias] Cc: stable@vger.kernel.org Signed-off-by: Henry Lin <henryl@nvidia.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | USB: Fix xhci event ring dequeue pointer ERDP update issueWeitao Wang2022-04-091-0/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some situations software handles TRB events slower than adding TRBs. If the number of TRB events to be processed in a given interrupt is exactly the same as the event ring size 256, then the local variable "event_ring_deq" that holds the initial dequeue position is equal to software_dequeue after handling all 256 interrupts. It will cause driver to not update ERDP to hardware, Software dequeue pointer is out of sync with ERDP on interrupt exit. On the next interrupt, the event ring may full but driver will not update ERDP as software_dequeue is equal to ERDP. [ 536.377115] xhci_hcd 0000:00:12.0: ERROR unknown event type 37 [ 566.933173] sd 8:0:0:0: [sdb] tag#27 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT [ 566.933181] sd 8:0:0:0: [sdb] tag#27 CDB: Write(10) 2a 00 17 71 e6 78 00 00 08 00 [ 572.041186] xhci_hcd On some situataions,the0000:00:12.0: xHCI host not responding to stop endpoint command. [ 572.057193] xhci_hcd 0000:00:12.0: Host halt failed, -110 [ 572.057196] xhci_hcd 0000:00:12.0: xHCI host controller not responding, assume dead [ 572.057236] sd 8:0:0:0: [sdb] tag#26 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD [ 572.057240] sd 8:0:0:0: [sdb] tag#26 CDB: Write(10) 2a 00 38 eb cc d8 00 00 08 00 [ 572.057244] sd 8:0:0:0: [sdb] tag#25 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD Hardware ERDP is updated mid event handling if there are more than 128 events in an interrupt (half of ring size). Fix this by updating the software local variable at the same time as hardware ERDP. [commit message rewording -Mathias] Fixes: dc0ffbea5729 ("usb: host: xhci: update event ring dequeue pointer on purpose") Reviewed-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220408134823.2527272-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'for-linus-5.18-rc1-tag' of ↵Linus Torvalds2022-03-281-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - A bunch of minor cleanups - A fix for kexec in Xen dom0 when executed on a high cpu number - A fix for resuming after suspend of a Xen guest with assigned PCI devices - A fix for a crash due to not disabled preemption when resuming as Xen dom0 * tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: fix is_xen_pmu() xen: don't hang when resuming PCI device arch:x86:xen: Remove unnecessary assignment in xen_apic_read() xen/grant-table: remove readonly parameter from functions xen/grant-table: remove gnttab_*transfer*() functions drivers/xen: use helper macro __ATTR_RW x86/xen: Fix kerneldoc warning xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32 xen: use time_is_before_eq_jiffies() instead of open coding it
| * xen/grant-table: remove readonly parameter from functionsJuergen Gross2022-03-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | The gnttab_end_foreign_access() family of functions is taking a "readonly" parameter, which isn't used. Remove it from the function parameters. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220311103429.12845-3-jgross@suse.com Reviewed-by: Jan Beulich <jbeulich@suse.com> Acked-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
* | Merge tag 'tty-5.18-rc1' of ↵Linus Torvalds2022-03-286-94/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver changes for 5.18-rc1. Nothing major, some more good cleanups from Jiri and 2 new serial drivers. Highlights include: - termbits cleanups - export symbol cleanups and other core cleanups from Jiri Slaby - new sunplus and mvebu uart drivers (amazing that people are still creating new uarts...) - samsung serial driver cleanups - ldisc 29 is now "reserved" for experimental/development line disciplines - lots of other tiny fixes and cleanups to serial drivers and bindings All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (104 commits) vt_ioctl: fix potential spectre v1 in VT_DISALLOCATE serial: 8250: fix XOFF/XON sending when DMA is used tty: serial: samsung: Add ARTPEC-8 support dt-bindings: serial: samsung: Add ARTPEC-8 UART serial: sc16is7xx: Clear RS485 bits in the shutdown tty: serial: samsung: simplify getting OF match data tty: serial: samsung: constify variables and pointers tty: serial: samsung: constify s3c24xx_serial_drv_data members tty: serial: samsung: constify UART name tty: serial: samsung: constify s3c24xx_serial_drv_data tty: serial: samsung: reduce number of casts tty: serial: samsung: embed s3c2410_uartcfg in parent structure tty: serial: samsung: embed s3c24xx_uart_info in parent structure serial: 8250_tegra: mark acpi_device_id as unused with !ACPI tty: serial: bcm63xx: use more precise Kconfig symbol serial: SERIAL_SUNPLUS should depend on ARCH_SUNPLUS tty: serial: jsm: fix two assignments in if conditions tty: serial: jsm: remove redundant assignments to variable linestatus serial: 8250_mtk: make two read-only arrays static const serial: samsung_tty: do not unlock port->lock for uart_write_wakeup() ...
| * | USB: serial: make use of UART_LCR_WLEN() + tty_get_char_size()Jiri Slaby2022-02-286-94/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Having a generic UART_LCR_WLEN() macro and the tty_get_char_size() helper, we can remove all those repeated switch-cases in drivers. Cc: Johan Hovold <johan@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20220224095558.30929-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'char-misc-5.18-rc1' of ↵Linus Torvalds2022-03-284-68/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
| * \ \ Merge tag 'phy-for-5.18' of ↵Greg Kroah-Hartman2022-03-104-68/+1
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next Vinod writes: phy-for-5.18 - New support: - Mediatek tphy support for MT8186 - Qualcomm usb phy support for sc8180x and sc8280xp - Qualcomm ufs phy support for sc8180x and sc8280xp - Qualcomm usb phy support for MSM8953 - Cadence D-Phy Rx support - Sun4i support for USB phy - Rockchip naneng combo phy support for RK3568 - Qualcomm eDP PHY for sc7280 - Updates: - wake on support for Synopsis XHCI controllers - Yamilify Qualcomm USB HS phy binding - Charger detection support for TI tusb1210 * tag 'phy-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (53 commits) phy: qcom-qmp: add sc8280xp UFS PHY dt-bindings: phy: qcom,qmp: add sc8180x and sc8280xp ufs compatibles phy: qcom-snps: Add sc8280xp support dt-bindings: phy: qcom,usb-snps-femto-v2: Add sc8180x and sc8280xp dt-bindings: Revert "dt-bindings: soc: grf: add naneng combo phy register compatible" phy: dt-bindings: Add Cadence D-PHY Rx bindings phy: dt-bindings: cdns,dphy: add power-domains property phy: dt-bindings: Convert Cadence DPHY binding to YAML phy: cadence: Add Cadence D-PHY Rx driver dt-bindings: phy: renesas,usb2-phy: Document RZ/V2L phy bindings Revert "PCI: aardvark: Fix initialization with old Marvell's Arm Trusted Firmware" Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720" Revert "ata: ahci: mvebu: Make SATA PHY optional for Armada 3720" phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation phy: marvell: phy-mvebu-a3700-comphy: Remove port from driver configuration phy: phy-brcm-usb: fixup BCM4908 support dt-bindings: phy: mediatek,tphy: Add compatible for MT8192 phy: ti: tusb1210: Add charger detection phy: ti: tusb1210: Add a delay between power-on and restoring the phy-parameters phy: ti: tusb1210: Drop tusb->vendor_specific2 != 0 check from tusb1210_power_on() ...
| | * | Revert "usb: host: xhci: mvebu: make USB 3.0 PHY optional for Armada 3720"Pali Rohár2022-02-254-68/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 3241929b67d28c83945d3191c6816a3271fd6b85. Armada 3720 phy driver (phy-mvebu-a3700-comphy.c) does not return -EOPNOTSUPP from phy_power_on() callback anymore. So remove XHCI_SKIP_PHY_INIT flag from xhci_mvebu_a3700_plat_setup() and then also whole xhci_mvebu_a3700_plat_setup() function which is there just to handle -EOPNOTSUPP for XHCI_SKIP_PHY_INIT. xhci plat_setup callback is not used by any other xhci plat driver, so remove this callback completely. Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220203214444.1508-5-kabel@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
* | | | Merge tag 'usb-5.18-rc1' of ↵Linus Torvalds2022-03-26107-1071/+3984
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt changes for 5.18-rc1. Nothing major in here, just lots of little improvements and cleanups and new device support. Highlights are: - list iterator fixups for when we walk past the end of the list (a common problem that was cut/pasted in almost all USB gadget drivers) - xen USB driver "hardening" for malicious hosts - xhci driver updates and fixes for more hardware types - xhci debug cable fixes to make it actually work again - usb gadget audio driver improvements - usb gadget storage fixes to work with OS-X - lots of other small usb gadget fixes and updates - USB DWC3 driver improvements for more hardware types - Lots of other small USB driver improvements - DTS updates for some USB platforms All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits) usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue() dt-bindings: usb: mtk-xhci: add compatible for mt8186 usb: dwc3: Issue core soft reset before enabling run/stop usb: gadget: Makefile: remove ccflags-y USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c usb: gadget: eliminate anonymous module_init & module_exit usb: usbip: eliminate anonymous module_init & module_exit xen/usb: harden xen_hcd against malicious backends usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue usb: dwc3: gadget: move cmd_endtransfer to extra function usb: dwc3: gadget: ep_queue simplify isoc start condition xen/usb: don't use arbitrary_virt_to_machine() usb: isp1760: remove redundant max_packet() macro usb: oxu210hp-hcd: remove redundant call to max_packet() macro usb: common: usb-conn-gpio: Make VBUS supply completely optional USB: storage: ums-realtek: fix error code in rts51x_read_mem() usb: early: xhci-dbc: Fix xdbc number parsing usb: early: xhci-dbc: Remove duplicate keep parsing x86/tsc: Be consistent about use_tsc_delay() usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body ...
| * | | | usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()YueHaibing2022-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | drivers/usb/gadget/udc/fsl_qe_udc.c: In function ‘qe_ep_dequeue’: drivers/usb/gadget/udc/fsl_qe_udc.c:1792:3: error: expected ‘;’ before ‘req’ req = iter; ^~~ Add missing semicolon to fix this. Fixes: 838884110f0d ("usb: gadget: fsl: remove usage of list iterator past the loop body") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20220319065031.36928-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: dwc3: Issue core soft reset before enabling run/stopWesley Cheng2022-03-183-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is recommended by the Synopsis databook to issue a DCTL.CSftReset when reconnecting from a device-initiated disconnect routine. This resolves issues with enumeration during fast composition switching cases, which result in an unknown device on the host. Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220316011358.3057-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: gadget: Makefile: remove ccflags-yLinyu Yuan2022-03-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | No header file used from udc directory, so remove line below ccflags-y += -I$(srctree)/drivers/usb/gadget/udc. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/1647333751-32367-1-git-send-email-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.cAlan Stern2022-03-181-79/+76
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel test robot found a problem with the ene_ub6250 subdriver in usb-storage: It uses structures containing bitfields to represent hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This is not safe; it presumes a particular bit ordering and it assumes the compiler will not insert padding, neither of which is guaranteed. This patch fixes the problem by changing the structures to simple u8 values, with the bitfields replaced by bitmask constants. CC: <stable@vger.kernel.org> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YjOcbuU106UpJ/V8@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: gadget: eliminate anonymous module_init & module_exitRandy Dunlap2022-03-183-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs Fixes: bd25a14edb75 ("usb: gadget: legacy/serial: allow dynamic removal") Fixes: 7bb5ea54be47 ("usb gadget serial: use composite gadget framework") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20220316192010.19001-7-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: usbip: eliminate anonymous module_init & module_exitRandy Dunlap2022-03-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Eliminate anonymous module_init() and module_exit(), which can lead to confusion or ambiguity when reading System.map, crashes/oops/bugs, or an initcall_debug log. Give each of these init and exit functions unique driver-specific names to eliminate the anonymous names. Example 1: (System.map) ffffffff832fc78c t init ffffffff832fc79e t init ffffffff832fc8f8 t init Example 2: (initcall_debug log) calling init+0x0/0x12 @ 1 initcall init+0x0/0x12 returned 0 after 15 usecs calling init+0x0/0x60 @ 1 initcall init+0x0/0x60 returned 0 after 2 usecs calling init+0x0/0x9a @ 1 initcall init+0x0/0x9a returned 0 after 74 usecs Fixes: 80fd9cd52de6 ("usbip: vudc: Add VUDC main file") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Krzysztof Opasiak <k.opasiak@samsung.com> Cc: Igor Kotrasinski <i.kotrasinsk@samsung.com> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Link: https://lore.kernel.org/r/20220316192010.19001-8-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | xen/usb: harden xen_hcd against malicious backendsJuergen Gross2022-03-161-14/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure a malicious backend can't cause any harm other than wrong I/O data. Missing are verification of the request id in a response, sanitizing the reported actual I/O length, and protection against interrupt storms from the backend. Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220311103509.12908-1-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Merge tag 'v5.17-rc8' into usb-nextGreg Kroah-Hartman2022-03-161-8/+18
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | | | | | | | | | | | We need the Xen USB fixes as other patches depend on those changes. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeueThinh Nguyen2022-03-154-5/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a Setup packet is received but yet to DMA out, the controller will not process the End Transfer command of any endpoint. Polling of its DEPCMD.CmdAct may block setting up TRB for Setup packet, causing a command timeout. This may occur if the driver doesn’t service the completion interrupt of the control status stage yet due to system latency, then it won’t prepare TRB and start the transfer for the next Setup Stage. To the host side, the control transfer had completed, and the host can send a new Setup packet at this point. In the meanwhile, if the driver receives an async call to dequeue a request (triggering End Transfer) to any endpoint, then the driver will service that End transfer first, blocking the control status stage completion handler. Since no TRB is available for the Setup stage, the Setup packet can’t be DMA’ed out and the End Transfer gets hung. The driver must not block setting up of the Setup stage. So track and only issue the End Transfer command only when there’s Setup TRB prepared so that the controller can DMA out the Setup packet. Delay the End transfer command if there's no Setup TRB available. This is applicable to all DWC_usb3x IPs. Co-developed-by: Wesley Cheng <quic_wcheng@quicinc.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220309205402.4467-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: dwc3: gadget: move cmd_endtransfer to extra functionMichael Grzeschik2022-03-151-32/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the extra function __dwc3_stop_active_transfer to consolidate the same codepath. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220306211251.2281335-3-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | usb: dwc3: gadget: ep_queue simplify isoc start conditionMichael Grzeschik2022-03-151-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To improve reading the code this patch moves the cases to start_isoc or return the function under one common condition check. Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20220306211251.2281335-2-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | xen/usb: don't use arbitrary_virt_to_machine()Juergen Gross2022-03-151-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arbitrary_virt_to_machine() is meant to be used in PV guests only. Replace its usage with virt_to_gfn(). Signed-off-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20220311103500.12885-1-jgross@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-01 14:17:18 +0100