summaryrefslogtreecommitdiffstats
path: root/drivers/video/matrox (follow)
Commit message (Collapse)AuthorAgeFilesLines
* matroxfb: rectify jitter (G450/G550)Paul A. Clarke2007-08-124-10/+30
| | | | | | | | | | | | | | | | | | This builds upon my previous attempts to resolve some jitter problems seen with the Matrox G450 and G550 -based cards, including odd disparities observed between x86 and Power -based machines in a somewhat less hackish way (removing the hacked ifdefs). Apparently, preference should be given to use the DVI PLL when frequencies permit, the Standard PLL otherwise. The max pixel clock for the panellink interface is extracted from the PInS information on the card and used as a limit to determine which PLL to use. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Acked-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/*: mark variables with uninitialized_var()Jeff Garzik2007-07-171-2/+7
| | | | | | | | Mark variables in drivers/* with uninitialized_var() if such a warning appears, and analysis proves that the var is initialized properly on all paths it is used. Signed-off-by: Jeff Garzik <jeff@garzik.org>
* matroxfb: color setting fixes fixAntonino A. Daplas2007-07-171-2/+0
| | | | | | | | | Remove more code that writes to cmap[16]. Signed-off-by: Antonino Daplas <adaplas@gmail.com> Acked-by: Petr Vandrovec <VANDROVE@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* matroxfb: color setting fixesAntonino A. Daplas2007-07-175-15/+8
| | | | | | | | | | | - the pseudo_palette is only 16 elements long. - do not write to the pseudo_palette if regno (array index) is more than 15 - remove code that writes to the 17th entry of the pseudo_palette Signed-off-by: Antonino Daplas <adaplas@gmail.com> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds2007-07-121-3/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
| * PCI: Change all drivers to use pci_device->revisionAuke Kok2007-07-121-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of all drivers reading pci config space to get the revision ID, they can now use the pci_device->revision member. This exposes some issues where drivers where reading a word or a dword for the revision number, and adding useless error-handling around the read. Some drivers even just read it for no purpose of all. In devices where the revision ID is being copied over and used in what appears to be the equivalent of hotpath, I have left the copy code and the cached copy as not to influence the driver's performance. Compile tested with make all{yes,mod}config on x86_64 and i386. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | matroxfb: Clean-up i2c header inclusionsJean Delvare2007-07-121-2/+0
|/ | | | | | | | matroxfb_crtc2 has nothing to do with i2c, so there's no reason why matroxfb_crtc2.h should include i2c header files. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz>
* Fix misspellings collected by members of KJ list.Robert P. J. Day2007-05-094-4/+4
| | | | | | | | Fix the misspellings of "propogate", "writting" and (oh, the shame :-) "kenrel" in the source tree. Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* i2c: Shrink struct i2c_clientDavid Brownell2007-05-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | This shrinks the size of "struct i2c_client" by 40 bytes: - Substantially shrinks the string used to identify the chip type - The "flags" don't need to be so big - Removes some internal padding It also adds kerneldoc for that struct, explaining how "name" is really a chip type identifier; it's otherwise potentially confusing. Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name and for i2c_adapter.name, this needed to affect i2c_adapter too. The adapters which used that symbol now use the more-obviously-correct idiom of taking the size of that field. JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to avoid wasting space in padding. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* i2c: Declare more i2c_adapter parent devicesJean Delvare2007-02-131-0/+1
| | | | | | | | | | | | | | | Declare the parent device of i2c_adapter devices each time we can easily do so. It makes the i2c_adapter appear at the right place in the device tree, rather than as a platform device. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Len Brown <len.brown@intel.com> Cc: Jordan Crouse <jordan.crouse@amd.com> Cc: Jody McIntyre <scjody@modernduck.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: v4l-dvb-maintainer@linuxtv.org Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
* [PATCH] matroxfb: Use kzallocJean Delvare2007-02-122-5/+2
| | | | | | | | | | Use kzalloc instead of kmalloc+memset, twice. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Acked-By: James Simmons <jsimmons@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [PATCH] getting rid of all casts of k[cmz]alloc() callsRobert P. J. Day2006-12-133-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Run this: #!/bin/sh for f in $(grep -Erl "\([^\)]*\) *k[cmz]alloc" *) ; do echo "De-casting $f..." perl -pi -e "s/ ?= ?\([^\)]*\) *(k[cmz]alloc) *\(/ = \1\(/" $f done And then go through and reinstate those cases where code is casting pointers to non-pointers. And then drop a few hunks which conflicted with outstanding work. Cc: Russell King <rmk@arm.linux.org.uk>, Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Greg KH <greg@kroah.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Paul Fulghum <paulkf@microgate.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Karsten Keil <kkeil@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Ian Kent <raven@themaw.net> Cc: Steven French <sfrench@us.ibm.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* i2c: Discard the i2c algo del_bus wrappersJean Delvare2006-12-101-1/+1
| | | | | | | They are all only calling i2c_del_adapter, so we may as well do it directly. Signed-off-by: Jean Delvare <khali@linux-fr.org>
* IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells2006-10-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
* [PATCH] matroxfb: Honor the return value of pci_register_driverAntonino A. Daplas2006-10-031-4/+8
| | | | | | | | Check the return value of pci_register_driver() Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* i2c-algo-bit: Discard the mdelay data struct memberJean Delvare2006-09-271-1/+0
| | | | | | | | | | | | | | i2c-algo-bit: Discard the mdelay data struct member The i2c_algo_bit_data structure has an mdelay member, which is not used by the algorithm code (the code has always been ifdef'd out.) Let's discard it to save some code and memory. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* i2c-matroxfb: Struct init conversionJean Delvare2006-09-271-6/+7
| | | | | | | | | | | | i2c-matroxfb: Struct init conversion Convert the struct i2c_algo_bit_data initialization to proper C99 style. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] matroxfb: fix jittery display on non-ppc systemsPaul A. Clarke2006-08-271-0/+8
| | | | | | | | | | | | | | | | | | | | I wish I was happier about this patch. It'll serve as a placeholder for the moment. I'm still trying to get a G550 working in order to even reproduce the problem this patch introduces. I find that the G450 has jitter even without this patch, so it won't show me what the patch changed. At this point, I'll continue trying to get the G550 to work, and in parallel work with the G450 to work out the kinks. The patch is below. Set XDVICLKCTRL only on PPC, as doing this apparently introduces jitter on the G550, at least on x86 architectures. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] vt: Remove VT-specific declarations and definitions from tty.hJon Smirl2006-07-101-1/+0
| | | | | | | | | | | | | MAX_NR_CONSOLES, fg_console, want_console and last_console are more of a function of the VT layer than the TTY one. Moving these to vt.h and vt_kern.h allows all of the framebuffer and VT console drivers to remove their dependency on tty.h. [akpm@osdl.org: fix alpha build] Signed-off-by: Jon Smirl <jonsmir@gmail.com> Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] irq-flags: video: Use the new IRQF_ constantsThomas Gleixner2006-07-021-1/+1
| | | | | | | | | | Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Remove obsolete #include <linux/config.h>Jörn Engel2006-06-307-7/+0
| | | | | Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
* V4L/DVB (4210a): git-dvb versus matroxfbAndrew Morton2006-06-251-25/+27
| | | | | | | | | drivers/video/matrox/matroxfb_base.c: In function 'matroxfb_ioctl': drivers/video/matrox/matroxfb_base.c:1140: error: 'VIDIOC_S_CTRL_OLD' undeclared (first use in this function) drivers/video/matrox/matroxfb_base.c:1140: error: (Each undeclared identifier is reported only once drivers/video/matrox/matroxfb_base.c:1140: error: for each function it appears in.) Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
* [PATCH] matroxfb: fix DVI setup to be more compatiblePaul A. Clarke2006-05-213-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | There has been a longstanding problem with the Matrox G450 and perhaps other similar cards, with modes "above" 1280x1024-60 on ppc/ppc64 boxes running Linux. Higher resolutions and/or higher refresh rates resulted in a very noticably "jittery" display, and sometimes no display, depending on the physical monitor. This patch fixes that problem on the systems I have easy access to... I've tested with SLES9SP3 (2.6.5+ kernel) and 2.6.16-rc6 custom kernels on an IBM eServer p5 520 w/G450 (a.k.a GXT135P on IBM's ppc64 systems), and a colleague of mine (Ian Romanick) tested it successfully on an Apple ppc32 box (w/GXT135P). I also tested it on IA32 box I have with a GXT135P to verify that it didn't obviously break anything. In my testing, I covered single-card, single and dual-head setups using both HD15 and DVI-D signals, on both the IA32 and ppc64 boxes. While everything appeared fine on both boxes, I did encounter one problem: I can't get any signal on the DVI-D output on the ppc64 box. However, this is also the case without my patch. I just noticed that screen-blanking only occurs on the primary display as well. Signed-off-by: Paul A. Clarke <pc@us.ibm.com> Signed-off-by: Ian Romanick <idr@us.ibm.com> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge ../linux-2.6Paul Mackerras2006-03-292-46/+34
|\
| * [PATCH] drivers/video: Use ARRAY_SIZE macroTobias Klauser2006-03-272-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Use ARRAY_SIZE macro instead of sizeof(x)/sizeof(x[0]) and remove duplicates of ARRAY_SIZE. Some coding style and trailing whitespaces are also fixed. Compile-tested where possible (some are other arch or BROKEN) Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] matrox maven: memory allocation and other cleanupsJean Delvare2006-03-271-30/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few cleanups which were done to almost all i2c drivers some times ago, but matroxfb_maven was forgotten: * Don't allocate two different structures at once. * Use kzalloc instead of kmalloc+memset. * Use strlcpy instead of strcpy. * Drop duplicate error message on client deregistration failure. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
| * [PATCH] matroxfb: simply return what i2c_add_driver() doesArthur Othieno2006-03-271-12/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | insmod will tell us when the module failed to load. We do no further processing on the return from i2c_add_driver(), so just return what i2c_add_driver() did, instead of storing it. Add __init/__exit annotations while we're at it. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* | [PATCH] powerpc: Kill _machine and hard-coded platform numbersBenjamin Herrenschmidt2006-03-281-1/+2
|/ | | | | | | | | | | | | | | | This removes statically assigned platform numbers and reworks the powerpc platform probe code to use a better mechanism. With this, board support files can simply declare a new machine type with a macro, and implement a probe() function that uses the flattened device-tree to detect if they apply for a given machine. We now have a machine_is() macro that replaces the comparisons of _machine with the various PLATFORM_* constants. This commit also changes various drivers to use the new macro instead of looking at _machine. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* kbuild: remove checkconfig.plBrian Gerst2006-02-196-6/+0
| | | | | | | | checkconfig.pl is no longer needed now that autoconf.h is automatically included. Remove it and all references to it. Signed-off-by: Brian Gerst <bgerst@didntduck.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
* [PATCH] fbdev: Sanitize ->fb_ioctl prototypeChristoph Hellwig2006-01-152-8/+6
| | | | | | | | | | | The ioctl and file arguments to ->fb_mmap are totally unused and there's not reason a driver should need them. Also update the ->fb_compat_ioctl prototype to be the same as ->fb_mmap. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Unlinline a bunch of other functionsArjan van de Ven2006-01-151-1/+1
| | | | | | | | | | | Remove the "inline" keyword from a bunch of big functions in the kernel with the goal of shrinking it by 30kb to 40kb Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] video/matrox/matroxfb_misc.c: remove dead codeAdrian Bunk2006-01-101-7/+1
| | | | | | | | | The Coverity checker spotted this dead code. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] drivers/video/: possible cleanupsAdrian Bunk2006-01-101-0/+2
| | | | | | | | | | | | | | | | This patch contains the possible cleanups including the following: - every file should #include the headers containing the prototypes for it's global functions - make needlessly global functions static - kyro/STG4000Interface.h: #include video/kyro.h and linux/pci.h instead of a manual "struct pci_dev" - i810_main.{c,h}: prototypes for static functions belong to the C file Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] matroxfb: Remove fbcon.h from the main header fileAntonino A. Daplas2006-01-101-4/+0
| | | | | | | | matroxfb has no need for struct display and fbcon.h. Remove. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] i2c: drop empty i2c_driver.command implementationsLaurent Riffard2006-01-061-5/+0
| | | | | | | | | | | Given that implementing i2c_driver.command is optional, there is no point in an empty implementation thereof. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Geng <linux@MichaelGeng.de> Cc: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] I2C: Remove .owner setting from i2c_driver as it's no longer neededGreg Kroah-Hartman2006-01-061-1/+0
| | | | | | | | | | Now that i2c_add_driver() doesn't need the module owner to be set by hand, we can delete it from the drivers. This patch catches all of the drivers that I found in the current tree (if a driver sets the .owner by hand, it's not a problem, just not needed.) Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Cc: Jean Delvare <khali@linux-fr.org>
* [PATCH] i2c: Drop i2c_driver.{owner,name}, 9 of 11Laurent Riffard2006-01-061-2/+4
| | | | | | | | | | | | We should use the i2c_driver.driver's .name and .owner fields instead of the i2c_driver's ones. This patch updates the matroxfb driver. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] i2c: Drop i2c_driver.flags, 2 of 3Jean Delvare2006-01-061-1/+0
| | | | | | | | | | | Just about every i2c chip driver sets the I2C_DF_NOTIFY flag, so we can simply make it the default and drop the flag. If any driver really doesn't want to be notified when i2c adapters are added, that driver can simply omit to set .attach_adapter. This approach is also more robust as it prevents accidental NULL pointer dereferences. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] matroxfb: Set maxhipri to 0Ville Syrjälä2005-11-071-1/+1
| | | | | | | | | | | | | The current init code sets hiprilvl to 0 and maxhipri to 5. According to the specs those values are illegal on both G200 and G400. It also causes distortions on the TV-out at least when CRTC2 is in YUV mode as is the case with DirectFB. This patch resets both values to 0. Signed-off-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] matroxfb: Kill a useless messageVille Syrjälä2005-11-071-4/+0
| | | | | | | | | | No point in spamming the logs with a message about xres rounding. Signed-off-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] matroxfb: Use CACHEFLUSH on all chipsVille Syrjälä2005-11-073-14/+2
| | | | | | | | | | | | | Use the CACHEFLUSH register on all chip types. The register is listed in all other specs except 2064W. However I have verified that the register does work on a 2064W despite being marked reserved in the specs. There were no noticeable side effects after writing to the register. Signed-off-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] matroxfb: Add support for Mystique AGPVille Syrjälä2005-11-071-0/+14
| | | | | | | | | | | | | | | | | | | | Add new entries for Mystique AGP with the PCI ID 0x051e. I don't actually have such boards but according to google they do exist. Curiosly X.Org doesn't recognize that PCI ID. And what's even more interesting is that Matrox's own Windows drivers don't recognize it either. After going through about a dozen different versions I did find one older driver that does list this particular ID. It is also listed in the pci.ids file. I'm not sure if non-220 AGP chips exist. I left the chip revision check intact for AGP chips nonetheless. Signed-off-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] matroxfb: Remove an unused wait queue entryVille Syrjälä2005-11-071-2/+0
| | | | | | | | | | | wait_event_event_interruptible() uses a private wait queue entry so there's no need for the caller to initialize one. Signed-off-by: Ville Syrjälä <syrjala@sci.fi> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fbcon/fbdev: Move softcursor out of fbdev to fbconAntonino A. Daplas2005-11-072-2/+1
| | | | | | | | | | | | | | | | | | | | According to Jon Smirl, filling in the field fb_cursor with soft_cursor for drivers that do not support hardware cursors is redundant. The soft_cursor function is usable by all drivers because it is just a wrapper around fb_imageblit. And because soft_cursor is an fbcon-specific hook, the file is moved to the console directory. Thus, drivers that do not support hardware cursors can leave the fb_cursor field blank. For drivers that do, they can fill up this field with their own version. The end result is a smaller code size. And if the framebuffer console is not loaded, module/kernel size is also reduced because the soft_cursor module will also not be loaded. Signed-off-by: Antonino Daplas <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] matroxfb adjustmentsJan Beulich2005-09-131-5/+8
| | | | | | | | | | | | | | Some adjustments to the matroxfb code, for one part preventing the display to be disabled for longer than necessary, and for the other part to make information about the frame buffer position available so that a kernel debugger might obtain that before the initial mode change. Finally, some return code corrections to fit the generic fb code. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] matroxfb: read MGA PInS data on PowerPCIan Romanick2005-09-091-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | This updates the matroxfb code so that it can find the PInS data embedded in the BIOS on PowerPC cards. The process for finding the data is different on OpenFirmware cards than on x86 cards, and the code for doing so was missing. After patching, building, installing, and booting a kernel, you should grep for "PInS" in /var/log/messages. You should see two messages in the log: PInS data found at offset XXXXX PInS memtype = X On the GXT135p card I get "31168" and "5". The first value is irrelevant, but it's presence lets me know that the PInS data was actually found. On a GXT130p, the second value should be 3. Since I don't have access to that hardware, if someone can verify that, I will submit a follow-on patch that rips out all the memtype parameter stuff. Signed-off-by: Ian Romanick <idr@us.ibm.com> Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2C: Kill i2c_algorithm.id (5/7)Jean Delvare2005-09-051-1/+1
| | | | | | | | | Merge the algorithm id part (16 upper bits) of the i2c adapters ids into the definition of the adapters ids directly. After that, we don't need to OR both ids together for each i2c_adapter structure. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* [PATCH] drivers/video/matrox/matroxfb_misc.c: remove dead codeAdrian Bunk2005-06-261-4/+1
| | | | | | | | | | | This patch removes some obviously dead code found by the Coverity checker. This patch was already ACK'ed by Petr Vandrovec. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] I2C: Kill address ranges in non-sensors i2c chip driversJean Delvare2005-06-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some months ago, you killed the address ranges mechanism from all sensors i2c chip drivers (both the module parameters and the in-code address lists). I think it was a very good move, as the ranges can easily be replaced by individual addresses, and this allowed for significant cleanups in the i2c core (let alone the impressive size shrink for all these drivers). Unfortunately you did not do the same for non-sensors i2c chip drivers. These need the address ranges even less, so we could get rid of the ranges here as well for another significant i2c core cleanup. Here comes a patch which does just that. Since the process is exactly the same as what you did for the other drivers set already, I did not split this one in parts. A documentation update is included. The change saves 308 bytes in the i2c core, and an average 1382 bytes for chip drivers which use I2C_CLIENT_INSMOD, 126 bytes for those which do not. This change is required if we want to merge the sensors and non-sensors i2c code (and we want to do this). Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/Documentation/i2c/writing-clients ===================================================================
* Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds2005-04-1720-0/+10160
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 16:11:33 +0100