summaryrefslogtreecommitdiffstats
path: root/drivers/w1 (follow)
Commit message (Collapse)AuthorAgeFilesLines
* w1: mxc_w1: Enable driver compilation with COMPILE_TESTAlexander Shiyan2014-03-012-7/+7
| | | | | | | | | This helps increasing build testing coverage. To do this, __raw_{read,write}b() functions was be replaced with simple {read,write}b() variants. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: mxc_w1: Driver cleanupAlexander Shiyan2014-03-011-23/+16
| | | | | | | | | | | | - Remove old and currently wrong address of the FSF from license parts of the code. - Remove unused #include and sort remaining headers alphabetically. - Remove unised definitions. - Add definitions for bit-fields. - Add missing module owner field. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: mxc_w1: Fix mxc_w1_ds2_reset_bus() return valueAlexander Shiyan2014-03-011-1/+1
| | | | | | | | | This patch fix mxc_w1_ds2_reset_bus() return value. According to i.MX reference manual, "presence status" reflected in the bit 6 of control register. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: Remove excess dependencies on W1 for masters and slavesAlexander Shiyan2014-03-012-7/+1
| | | | | | | | Configuration for masters and slaves is included only if W1 symbol enabled, so no reason to check it once more. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1-gpio: handle of_get_gpio() returning -EPROBE_DEFER betterUwe Kleine-König2014-02-151-5/+14
| | | | | | | | | | | | | | | | | | of_get_gpio() might return -EPROBE_DEFER meaning that the driver providing the gpio isn't ready yet. If that happens for the first gpio the resulting kernel output without this patch is: w1-gpio somename: Failed to parse DT platform somename: Driver w1-gpio requests probe deferral The first message is misleading and so is suppressed with this patch. Further if determining the gpio to switch the external pullup yields -EPROBE_DEFER this error should be passed back to the caller instead of just continuing without pullup. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: small type cleanup in sysfsDan Carpenter2014-02-151-2/+2
| | | | | | | | | | | | | On 64 bit systems, a large value for "long tmp" is truncated when assigning to "int md->max_slave_count" so we still end up with a value less than one despite the "tmp < 1" check. This is more of a problem for static checkers than a real life issue, but it's simple enough to fix. Acked-by: David Fries <david@fries.net> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Revert ds1wm.c from "w1: hold bus_mutex in netlink and search"David Fries2014-02-081-3/+1
| | | | | | | | | | | This reverts ds1wm.c from commit d3a8a9dbb903c73a7ec2deae4c9b7d74b6834f4c. Of the three files changed ds1wm.c ds2490.c and w1_netlink.c, it turns out ds1wm.c was locking bus_mutex, but inside the loop and I missed it. Reverting ds1wm.c to the previous version. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David Fries <David@Fries.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: hold bus_mutex in netlink and searchDavid Fries2014-02-083-5/+20
| | | | | | | | | | | | | The bus_mutex needs to be taken to serialize access to a specific bus. netlink wasn't updated when bus_mutex was added and was calling without that lock held, and not all of the masters were holding the bus_mutex in a search. This was causing the ds2490 hardware to stop responding when both netlink and /sys slaves were executing bus commands at the same time. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: format for DocBook and fixesDavid Fries2014-02-087-94/+209
| | | | | | | | | Switch the code documentation format style to DocBook format, enable DocBook documentation generation, and fix some comments. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: use family_data instead of rom in w1_slaveDavid Fries2014-02-082-3/+19
| | | | | | | | | | | | | | The first line printed from w1_slave gives the context of the w1 device. So does the second line, but if the CRC check failed, the second line contains the last successful result. It is confusing when it prints the temperature next to the line that might be a previous conversion and has nothing to do with that printed temperature value. Modify the code to store the last good conversion in family_data, which is designed for custom data structures. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: ds2490 fix and enable hardware searchDavid Fries2014-02-081-22/+86
| | | | | | | | | | | | | The hardware search was failing without the COMM_RST flag. Enabled the flag and rewrote the function to handle more than one buffer of results and to continuing where the search left off. Remove hardware search note from the limitations now that it works. The "w1: ds2490 USB setup fixes" change went from 23.16 seconds to about 3 seconds, this takes the time for the search down to .307346 seconds. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: ds2490 USB setup fixesDavid Fries2014-02-081-8/+14
| | | | | | | | | | | | | | | Calling usb_reset_configuration after usb_set_interface resets the interface that was just selected, so call reset first. Using alternative 3 greatly speeds the one wire search. alt 0 or 1, 10ms int, 23.16 seconds alt 2 or 3, 1ms int, 2.99 to 3.05 seconds Use usb_interrupt_msg not usb_bulk_msg as it is an interrupt pipe (bulk worked, it was just technically the wrong call). Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: ds2490 reduce magic numbersDavid Fries2014-02-081-8/+15
| | | | | | | | | Use a #define for the usb vendor request type, clear the status byte and use that instead of a magic offset in checking if idle. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: reply only to the requester portidDavid Fries2014-02-082-17/+30
| | | | | | | | | | | | Unicast one wire replies back to the sender portid to avoid multiple programs getting each other's messages, especially as the response can't be uniquely identified with the sequence coming from the requesting program when both programs generate the same id. Continue to broadcast events such as add/remove master/slave devices. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* connector: add portid to unicast in addition to broadcastingDavid Fries2014-02-081-7/+7
| | | | | | | | | This allows replying only to the requestor portid while still supporting broadcasting. Pass 0 to portid for the previous behavior. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: process w1 netlink commands in w1_process threadDavid Fries2014-02-084-95/+300
| | | | | | | | | | | Netlink is a socket interface and is expected to be asynchronous. Clients can now make w1 requests without blocking by making use of the w1_master thread to process netlink commands which was previously only used for doing an automatic bus search. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: new netlink commands, add/remove/list slavesDavid Fries2014-02-084-39/+126
| | | | | | | | | | | | | | | Introduce new commands to add, remove, and list slave devices through the netlink interface. This can be useful to skip the search on a static network. They could previously only be added or removed through automatic search or sysfs, and this allows a program to only use netlink. Only allocate memory when needed, so move kzalloc into w1_get_slaves where it was used. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: continue slave search where previous left offDavid Fries2014-02-082-3/+18
| | | | | | | | | Search will detect at most max_slave_count devices per run, if there are more pick up the next search where the previous left off. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: increase w1_max_slave_count, allow write accessDavid Fries2014-02-082-2/+30
| | | | | | | | | | | | | | w1_max_slave_count is only used to abort the search early or take a fast search (when 1), so there isn't any reason to not allow it to be updated through sysfs. Memory is not allocated based on the current value and 10 is a rather low base number, increasing to 64, and printing a message the first time the count is reached and there were more devices to discover to let the user know why not all the devices were found. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: Only wake up the search process if it is going to be searchingDavid Fries2014-02-081-1/+3
| | | | | | | | | It's valid to set the search count to 0 to stop searching, so don't wake up the search thread to not search. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: fixup search to support abort from netlinkDavid Fries2014-02-083-2/+13
| | | | | | | | | | | | | | | | | | | | | Before 63706172f33 "rework kthread_stop()" kthread_should_stop() always returned false when called from a non-kthread task, after it would oops as a non-kthread didn't have that structure and netlink was calling search from a thread which wasn't a kthread. 9d1817cab2f030 "w1: fix oops when w1_search is called from netlink connector", modified the code to avoid calling kthread_stop from a netlink thread. Introduce a w1_master flag and bit W1_ABORT_SEARCH to identify abort to cleanly support both kthread and netlink search abort. A search can take seconds to run, so it is important to abort early if the hardware is removed in the middle of a search. Signed-off-by: David Fries <David@Fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Marcin Jurkowski <marcin1j@gmail.com> Cc: Josh Boyer <jwboyer@gmail.com> Cc: Sven Geggus <lists@fuchsschwanzdomain.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: fix w1_send_slave dropping a slave idDavid Fries2014-02-081-12/+13
| | | | | | | | | | | | | | | | | | | | | | Previous logic, if (avail > 8) { store slave; return; } send data; clear; The logic error is, if there isn't space send the buffer and clear, but the slave wasn't added to the now empty buffer loosing that slave id. It also should have been "if (avail >= 8)" because when it is 8, there is space. Instead, if there isn't space send and clear the buffer, then there is always space for the slave id. Signed-off-by: David Fries <David@Fries.net> Cc: stable@vger.kernel.org Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/w1/masters/w1-gpio.c: add strong pullup emulationEvgeny Boger2014-01-242-12/+22
| | | | | | | | | | | | Strong pullup is emulated by driving pin logic high after write command when using tri-state push-pull GPIO. Signed-off-by: Evgeny Boger <boger@contactless.ru> Cc: Greg KH <greg@kroah.com> Acked-by: David Fries <david@fries.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: mxc_w1: Check the clk_prepare_enable() return valueAlexander Shiyan2013-12-091-6/+9
| | | | | | Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: mxc_w1: Add warning for base frequency calculationAlexander Shiyan2013-12-091-2/+12
| | | | | | | | | Base frequency should be as close as possible to 1 MHz. This patch adds warnings when clock is unreliable, according to i.MX datasheet. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: mxc_w1: Remove unused field "clkdiv" from private structureAlexander Shiyan2013-12-091-3/+3
| | | | | | | | | Private field "clkdiv" is not used outside "probe", so there are no reason to keep it in driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/w1/masters/w1-gpio.c: use dev_get_platdata()Jingoo Han2013-11-151-5/+5
| | | | | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers: w1: make w1_slave::flags long to avoid memory corruptionMichal Nazarewicz2013-11-132-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On architectures where long is more then 32 bits, modifying a 32-bit field with set_bit (and other atomic bit operations) may cause bytes following the field to by modified. Because the endianness of the bits within a field is the native endianness of the CPU[1], on big-endian machines, bit number zero is in the last byte of the field. Therefore, `set_bit(0, ptr)' on a 64-bit big-endian machine is roughly equivalent to `((char *)ptr)[7] |= 1', and since w1 driver uses a 32-bit field for holding the flags, this causes bytes beyond the field to be modified. [1] From Documentation/atomic_ops.txt: Native atomic bit operations are defined to operate on objects aligned to the size of an "unsigned long" C data type, and are least of that size. The endianness of the bits within each "unsigned long" are the native endianness of the cpu. Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/w1/masters/ds1wm.cuse dev_get_platdata()Jingoo Han2013-11-131-6/+6
| | | | | | | | | | | | Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1-gpio: Use devm_* functionsMarkus Pargmann2013-10-301-19/+9
| | | | | | Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1-gpio: Detect of_gpio_error for first gpioMarkus Pargmann2013-10-301-1/+6
| | | | | | | | | | | The first DT gpio is necessary for this driver, but errors returned for of_get_gpio are ignored. This patch adds a return value check for the first of_get_gpio. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 3.12-rc6 into char-misc-nextGreg Kroah-Hartman2013-10-191-0/+6
|\ | | | | | | | | | | We want the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * w1 - call request_module with w1 master mutex unlockedHans-Frieder Vogt2013-10-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | request_module for w1 slave modules needs to be called with the w1 master mutex unlocked. Because w1_attach_slave_device gets always(?) called with mutex locked, we need to temporarily unlock the w1 master mutex for the loading of the w1 slave module. Signed-off by: Hans-Frieder Vogt <hfvogt@gmx.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> # 3.11+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * w1 - fix fops in w1_bus_notifyHans-Frieder Vogt2013-10-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Introduce a check to make sure that fops are only called if they have been defined by the slave module. Without this check modules like w1_smem cause a NULL pointer dereference bug. Signed-off by: Hans-Frieder Vogt <hfvogt@gmx.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: stable <stable@vger.kernel.org> # 3.11+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | w1: omap-hdq: remove deprecated IRQF_DISABLEDMichael Opdenacker2013-10-161-2/+1
| | | | | | | | | | | | | | | | | | | | This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | w1: ds1wm: remove deprecated IRQF_DISABLEDMichael Opdenacker2013-10-161-1/+1
|/ | | | | | | | | | This patch proposes to remove the use of the IRQF_DISABLED flag It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Remove GENERIC_HARDIRQ config optionMartin Schwidefsky2013-09-131-1/+1
| | | | | | | | After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* drivers/w1/masters/mxc_w1.c: remove unnecessary platform_set_drvdata()Jingoo Han2013-09-121-2/+0
| | | | | | | | | | | | | The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Greg KH <greg@kroah.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* drivers/w1/w1.c: replace strict_strtol() with kstrtol()Jingoo Han2013-09-121-4/+8
| | | | | | | | | | The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* w1: slaves: w1_ds2781: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-18/+18
| | | | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_ds2760: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-17/+18
| | | | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_ds2780: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-18/+18
| | | | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_ds28e04: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-70/+42
| | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_ds2433: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-25/+22
| | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_ds2431: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-24/+19
| | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_ds2423: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-18/+9
| | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_ds2413.c: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-50/+22
| | | | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_ds2408: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-122/+52
| | | | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: slaves: w1_therm: convert to use w1_family_ops.groupsGreg Kroah-Hartman2013-08-221-15/+9
| | | | | | | | | | | This moves the sysfs file creation/removal to the w1 core by using the .groups field, saving code in the slave driver. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: David Stevenson <david@avoncliff.com> Cc: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de> Cc: Michael Arndt <michael@scriptkiller.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* w1: add attribute groups to struct w1_family_opsGreg Kroah-Hartman2013-08-222-32/+42
| | | | | | | | | This lets w1 slave drivers declare an attribute group, and not have to create/destroy sysfs files directly. All w1 slave drivers will be fixed to use this field up in follow-on patches to this one. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 03:27:11 +0100