summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog (follow)
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2015-09-1249-130/+844
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull watchdog updates from Wim Van Sebroeck: - new driver for NXP LPC18xx Watchdog Timer - new driver for SAMA5D4 watchdog timer - add support for MCP79 to nv_tco driver - clean-up and improvement of the mpc8xxx watchdog driver - improvements to gpio-wdt - at91sam9_wdt clock improvements ... and other small fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (25 commits) Watchdog: Fix parent of watchdog_devices watchdog: at91rm9200: Correct check for syscon_node_to_regmap() errors watchdog: at91sam9: get and use slow clock Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver watchdog: add a driver to support SAMA5D4 watchdog timer watchdog: mpc8xxx: allow to compile for MPC512x watchdog: mpc8xxx: use better error code when watchdog cannot be enabled watchdog: mpc8xxx: use dynamic memory for device specific data watchdog: mpc8xxx: use devm_ioremap_resource to map memory watchdog: mpc8xxx: make use of of_device_get_match_data watchdog: mpc8xxx: simplify registration watchdog: mpc8xxx: remove dead code watchdog: lpc18xx_wdt_get_timeleft() can be static DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation watchdog: NXP LPC18xx Watchdog Timer Driver watchdog: gpio-wdt: ping already at startup for always running devices watchdog: gpio-wdt: be more strict about hw_algo matching Documentation: watchdog: at91sam9_wdt: add clocks property watchdog: booke_wdt: Use infrastructure to check timeout limits watchdog: (nv_tco) add support for MCP79 ...
| * Watchdog: Fix parent of watchdog_devicesPratyush Anand2015-09-0936-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | /sys/class/watchdog/watchdogn/device/modalias can help to identify the driver/module for a given watchdog node. However, many wdt devices do not set their parent and so, we do not see an entry for device in sysfs for such devices. This patch fixes parent of watchdog_device so that /sys/class/watchdog/watchdogn/device is populated. Exceptions: booke, diag288, octeon, softdog and w83627hf -- They do not have any parent. Not sure, how we can identify driver for these devices. Signed-off-by: Pratyush Anand <panand@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: at91rm9200: Correct check for syscon_node_to_regmap() errorsBjorn Andersson2015-09-091-1/+1
| | | | | | | | | | | | | | | | syscon_node_to_regmap() returns a regmap or an ERR_PTR(). Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: at91sam9: get and use slow clockAlexandre Belloni2015-09-091-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | Commit dca1a4b5ff6e ("clk: at91: keep slow clk enabled to prevent system hang") added a workaround for the slow clock as it is not properly handled by its users. Get and use the slow clock as it is necessary for the at91sam9 watchdog. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: add a driver to support SAMA5D4 watchdog timerWenyou Yang2015-09-094-0/+292
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From SAMA5D4, the watchdog timer is upgrated with a new feature, which is describled as in the datasheet, "WDT_MR can be written until a LOCKMR command is issued in WDT_CR". That is to say, as long as the bootstrap and u-boot don't issue a LOCKMR command, WDT_MR can be written more than once in the driver. So the SAMA5D4 watchdog driver's implementation is different from the at91sam9260 watchdog driver implemented in file at91sam9_wdt.c. The user application open the device file to enable the watchdog timer hardware, and close to disable it, and set the watchdog timer timeout by seting WDV and WDD fields of WDT_MR register, and ping the watchdog by issuing WDRSTT command to WDT_CR register with hard-coded key. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mpc8xxx: allow to compile for MPC512xUwe Kleine-König2015-09-091-1/+1
| | | | | | | | | | | | | | | | | | | | The MPC5125 processor features a watchdog device that is identical to the MPC8610 one. So allow to enable the driver for MPC512x kernel configurations. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mpc8xxx: use better error code when watchdog cannot be enabledUwe Kleine-König2015-09-091-1/+1
| | | | | | | | | | | | | | | | | | checkpatch warns about ENOSYS, telling "ENOSYS means 'invalid syscall nr' and nothing else". So use ENODEV instead. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mpc8xxx: use dynamic memory for device specific dataUwe Kleine-König2015-09-091-35/+53
| | | | | | | | | | | | | | | | | | | | | | Instead of relying on global static memory dynamically allocate the needed data. This has the benefit of some saved bytes if the driver is not in use and making it possible to bind more than one device (even though this has no known use case). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mpc8xxx: use devm_ioremap_resource to map memoryUwe Kleine-König2015-09-091-12/+7
| | | | | | | | | | | | | | | | This simplifies the error paths and device unbinding. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mpc8xxx: make use of of_device_get_match_dataUwe Kleine-König2015-09-091-4/+2
| | | | | | | | | | | | | | | | | | This function is new in v4.2-rc1 and makes a forward declaration of the match table superfluous which can so be removed. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mpc8xxx: simplify registrationUwe Kleine-König2015-09-091-31/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit ef90174f8210 ("watchdog: watchdog_core: Add watchdog registration deferral mechanism") there is no need to delay the call to watchdog_register_device any more. So simplify the registration code accordingly. Resetting wd_base to NULL can the also be dropped because nothing depends on it being NULL to signal probe failure any more. (The matching wd_base = NULL in .remove was missing, too.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mpc8xxx: remove dead codeUwe Kleine-König2015-09-091-13/+2
| | | | | | | | | | | | Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: lpc18xx_wdt_get_timeleft() can be staticFengguang Wu2015-09-091-1/+1
| | | | | | | | | | | | Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: NXP LPC18xx Watchdog Timer DriverAriel D'Alessandro2015-09-093-0/+352
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the watchdog timer found in NXP LPC SoCs family, which includes LPC18xx/LPC43xx. Other SoCs in that family may share the same watchdog hardware. Watchdog driver registers a restart handler that will restart the system by performing an incorrect feed after ensuring the watchdog is enabled in reset mode. As watchdog cannot be disabled in hardware, driver's stop routine will regularly send a keepalive ping using a timer. Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: gpio-wdt: ping already at startup for always running devicesUwe Kleine-König2015-09-091-30/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During probe for an always-running watchdog a timer is setup to constantly ping the watchdog while the device is not open. The gpio to ping the watchdog is setup to inactive. For a watchdog with hw_algo = "toggle" this results in a ping depending on the initial state of the gpio, for hw_algo = "level" no ping is generated. Make sure that the first automatic ping is sent immediately and not only when the timer expires the first time. This makes the machine survive in case more than half of the watchdog timeout is already elapsed. (Which is very probable for the chip I'm faced with that has a timeout of one second.) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: gpio-wdt: be more strict about hw_algo matchingUwe Kleine-König2015-09-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | strncmp(algo, "toggle", 6) doesn't compare the trailing '\0' byte, so using hw_algo = "toggleboggle" is recognized the same way as hw_algo = "toggle" . While this doesn't introduce any problems for a device tree that sticks to the documented settings it's still ugly. Fix this by using strcmp to only match on "toggle" and "level". Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: booke_wdt: Use infrastructure to check timeout limitsGuenter Roeck2015-09-091-3/+1
| | | | | | | | | | | | | | | | The watchdog infrastructure checks the maximum timeout for us. Use it. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: (nv_tco) add support for MCP79Vivien Didelot2015-09-091-0/+2
| | | | | | | | | | | | | | | | | | Tested on the Nvidia chipset with an SMBus controller PCI ID 0x0AA2 (as shown in the PCI listing during the boot sequence). Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: sunxi: fix activation of system resetFrancesco Lavra2015-09-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit f2147de33470 ("watchdog: sunxi: support parameterized compatible strings") introduced a regression in sunxi_wdt_start(), by which the system reset function of the watchdog is not enabled upon starting the watchdog. As a result, the system is not reset when the watchdog expires. Fix it. Fixes: f2147de33470 ("watchdog: sunxi: support parameterized compatible strings") Signed-off-by: Francesco Lavra <francescolavra.fl@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: stable@vger.kernel.org
| * watchdog: mtk_wdt: add wdt shutdown callback to disable wdt if enabledGreta Zhang2015-09-091-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Without .shutdown(), watchdog might reset the system during power off. For example, if watchdog's timeout is set to 30s, then it is reset to zero by mtk_wdt_ping(). During power off, no app will ping watchdog, but watchdog is still running and may trigger reset. Signed-off-by: Greta Zhang <greta.zhang@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mtk_wdt: add suspend/resume supportGreta Zhang2015-09-091-0/+30
| | | | | | | | | | | | | | | | | | | | | | add mediatek watchdog driver suspend/resume support Signed-off-by: Greta Zhang <greta.zhang@mediatek.com> Signed-off-by: Roger Lu <roger.lu@mediatek.com> Signed-off-by: Eddie Huang <eddie.huang@mediatek.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imgpdc: Unregister restart handler on removeEzequiel Garcia2015-09-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | Commit c631f20068 ("watchdog: imgpdc: Add reboot support") introduced a restart handler but forgot to unregister it on driver removal. Fix it. Fixes: c631f20068 ("watchdog: imgpdc: Add reboot support") Reported-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | Merge tag 'mfd-for-linus-4.3' of ↵Linus Torvalds2015-09-042-34/+51
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support: - New Clocksource driver from ST - New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms - Add support for Arizona WM8998 and WM1814 - Add support for Dialog Semi DA9062 and DA9063 - Add support for Kontron COMe-bBL6 and COMe-cBW6 - Add support for X-Powers AXP152 - Add support for Atmel, many - Add support for STMPE, many - Add support for USB in X-Powers AXP22X Core Frameworks: - New Base API to traverse devices and their children in reverse order Bug Fixes: - Fix race between runtime-suspend and IRQs - Obtain platform data form more reliable source Fix-ups: - Constifying things - Variable signage changes - Kconfig depends|selects changes - Make use of BIT() macro - Do not supply .owner attribute in *_driver structures - MAINTAINERS entries - Stop using set_irq_flags() - Start using irq_set_chained_handler_and_data() - Export DT device ID structures" * tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: jz4740-adc: Init mask cache in generic IRQ chip mfd: cros_ec: spi: Add OF match table mfd: stmpe: Add OF match table mfd: max77686: Split out regulator part from the DT binding mfd: Add DT binding for Maxim MAX77802 IC mfd: max77686: Use a generic name for the PMIC node in the example mfd: max77686: Don't suggest in binding to use a deprecated property mfd: Add MFD_CROS_EC dependencies mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs mfd: axp20x: Add missing registers, and mark more registers volatile mfd: arizona: Fixup some formatting/white space errors mfd: wm8994: Fix NULL pointer exception on missing pdata of: Add vendor prefix for Nuvoton mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event mfd: atmel-hlcdc: Add support for new SoCs mfd: Export OF module alias information in missing drivers mfd: stw481x: Export I2C module alias information mfd: da9062: Support for the DA9063 OnKey in the DA9062 core mfd: max899x: Avoid redundant irq_data lookup ...
| * | watchdog: iTCO_wdt: Add support for TCO on Intel SunrisepointMatt Fleming2015-08-112-28/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The revision of the watchdog hardware in Sunrisepoint necessitates a new "version" inside the TCO watchdog driver because some of the register layouts have changed. Also update the Kconfig entry to select both the LPC and SMBus drivers since the TCO device is on the SMBus in Sunrisepoint. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * | mfd: watchdog: iTCO_wdt: Expose watchdog properties using platform dataMatt Fleming2015-08-111-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel Sunrisepoint (Skylake PCH) has the iTCO watchdog accessible across the SMBus, unlike previous generations of PCH/ICH where it was on the LPC bus. Because it's on the SMBus, it doesn't make sense to pass around a 'struct lpc_ich_info', and leaking the type of bus into the iTCO watchdog driver is kind of backwards anyway. This change introduces a new 'struct itco_wdt_platform_data' for use inside the iTCO watchdog driver and by the upcoming Intel Sunrisepoint code, which neatly avoids having to include lpc_ich headers in the i801 i2c driver. This change is overdue because lpc_ich_info has already found its way into other TCO watchdog users, notably the intel_pmc_ipc driver where the watchdog actually isn't on the LPC bus as far as I can see. A simple translation layer is provided for converting from the existing 'struct lpc_ich_info' inside the lpc_ich mfd driver. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Acked-by: Darren Hart <dvhart@linux.intel.com> [drivers/x86 refactoring] Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | | char: make misc_deregister a void functionGreg Kroah-Hartman2015-08-053-10/+7
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With well over 200+ users of this api, there are a mere 12 users that actually checked the return value of this function. And all of them really didn't do anything with that information as the system or module was shutting down no matter what. So stop pretending like it matters, and just return void from misc_deregister(). If something goes wrong in the call, you will get a WARNING splat in the syslog so you know how to fix up your driver. Other than that, there's nothing that can go wrong. Cc: Alasdair Kergon <agk@redhat.com> Cc: Neil Brown <neilb@suse.com> Cc: Oleg Drokin <oleg.drokin@intel.com> Cc: Andreas Dilger <andreas.dilger@intel.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Christine Caulfield <ccaulfie@redhat.com> Cc: David Teigland <teigland@redhat.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | Update Viresh Kumar's email addressViresh Kumar2015-07-181-2/+2
|/ | | | | | | | | Switch to my kernel.org alias instead of a badly named gmail address, which I rarely use. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds2015-07-0216-155/+870
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull watchdog updates from Wim Van Sebroeck: "This contains: - new driver for ST's LPC Watchdog - new driver for Conexant Digicolor CX92755 SoC - new driver for DA9062 watchdog - Addition of the watchdog registration deferral mechanism - several improvements on omap_wdt - several improvements and reboot-support for imgpdc_wdt - max63xx_wdt improvements - imx2_wdt improvements - dw_wdt improvements - and other small improvements and fixes" * git://www.linux-watchdog.org/linux-watchdog: (37 commits) watchdog: omap_wdt: early_enable module parameter watchdog: gpio_wdt: Add option for early registration watchdog: watchdog_core: Add watchdog registration deferral mechanism watchdog: max63xx: dynamically allocate device watchdog: imx2_wdt: Disable previously acquired clock on error path watchdog: imx2_wdt: Check for clk_prepare_enable() error watchdog: hpwdt: Add support for WDIOC_SETOPTIONS watchdog: docs: omap_wdt also understands nowayout watchdog: omap_wdt: implement get_timeleft watchdog: da9062: DA9062 watchdog driver watchdog: imx2_wdt: set watchdog parent device watchdog: mena21_wdt: Fix possible NULL pointer dereference watchdog: dw_wdt: keepalive the watchdog at write time watchdog: dw_wdt: No need for a spinlock watchdog: imx2_wdt: also set wdog->timeout to new_timeout watchdog: Allow compile test of GPIO consumers if !GPIOLIB watchdog: cadence: Add dependency on HAS_IOMEM watchdog: max63xx_wdt: Constify platform_device_id watchdog: MAX63XX_WATCHDOG does not depend on ARM watchdog: imgpdc: Add some documentation about the timeout ...
| * watchdog: omap_wdt: early_enable module parameterLars Poeschel2015-07-011-0/+8
| | | | | | | | | | | | | | | | | | | | | | Add a early_enable module parameter to the omap_wdt that starts the watchdog on module insertion. The default value is 0 which does not start the watchdog - which also does not change the behavior if the parameter is not given. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: gpio_wdt: Add option for early registrationJean-Baptiste Theou2015-06-292-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In some situation, mainly when it's not possible to disable a watchdog, you may want the watchdog driver to be started as soon as possible. Adding GPIO_WATCHDOG_ARCH_INITCALL to raise initcall from module_init to arch_initcall. This patch require watchdog registration deferral mechanism Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: watchdog_core: Add watchdog registration deferral mechanismJean-Baptiste Theou2015-06-291-18/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently, watchdog subsystem require the misc subsystem to register a watchdog. This may not be the case in case of an early registration of a watchdog, which can be required when the watchdog cannot be disabled. This patch introduces a deferral mechanism to remove this requirement. Signed-off-by: Jean-Baptiste Theou <jtheou@adeneo-embedded.us> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: max63xx: dynamically allocate deviceVivien Didelot2015-06-291-66/+104
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes the static watchdog device for a new max63xx_wdt data structure, and constifies the max63xx_timeout data. The new structure contains pointers to pin access routines, which abstracts mmap-specific code. This will ease future accesses like GPIO. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imx2_wdt: Disable previously acquired clock on error pathFabio Estevam2015-06-261-1/+5
| | | | | | | | | | | | | | | | | | If watchdog_register_device() fails we should disable the previously acquired wdev->clk clock on error path. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imx2_wdt: Check for clk_prepare_enable() errorFabio Estevam2015-06-261-2/+7
| | | | | | | | | | | | | | | | | | clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: hpwdt: Add support for WDIOC_SETOPTIONSJean Delvare2015-06-221-1/+15
| | | | | | | | | | | | | | | | | | WDIOC_SETOPTIONS makes it possible to disable and re-enable the watchdog timer while the hpwdt driver is loaded. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: omap_wdt: implement get_timeleftLars Poeschel2015-06-222-0/+12
| | | | | | | | | | | | | | | | | | | | | | The omap watchdog hardware is able to read the watchdog timer counter register. This implements this functionality in the omap_wdt driver, so one is can read the time until the watchdog will trigger the reset in seconds using WDIOC_GETTIMELEFT. Signed-off-by: Lars Poeschel <poeschel@lemonage.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: da9062: DA9062 watchdog driverS Twiss2015-06-223-0/+263
| | | | | | | | | | | | | | | | Add watchdog driver support for DA9062 Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imx2_wdt: set watchdog parent deviceVladimir Zapolskiy2015-06-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If on watchdog device registration a parent device is not set, then the registered watchdog is considered to be a virtual device: /sys/devices/virtual/watchdog/watchdog0 /sys/devices/virtual/watchdog/watchdog1 Setting a correct reference to a platform device allows to distinguish multiple instances of iMX2+ hardware watchdogs: /sys/devices/soc0/soc/2000000.aips-bus/20bc000.wdog/watchdog/watchdog0 /sys/devices/soc0/soc/2000000.aips-bus/20c0000.wdog/watchdog/watchdog1 Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: mena21_wdt: Fix possible NULL pointer dereferenceJohannes Thumshirn2015-06-221-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | In a21_wdt_remove() we do a watchdog_unregister_device() on struct a21_wdt_drv->wdt but never assign it. Also move the dev_set_drvdata() call in front of the watchdog_register_device() call, so it doesn't look like an error. Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: dw_wdt: keepalive the watchdog at write timeDoug Anderson2015-06-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If you've got code that does this in a tight loop 1. Open watchdog 2. Send 'expect close' 3. Close watchdog ...you'll eventually trigger a watchdog reset. You can reproduce this by using daisydog (1) and running: while true; do daisydog -c > /dev/null; done The problem is that each time you write to the watchdog for 'expect close' it moves the timer .5 seconds out. The timer thus never fires and never pats the watchdog for you. 1: http://git.chromium.org/gitweb/?p=chromiumos/third_party/daisydog.git Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: dw_wdt: No need for a spinlockDoug Anderson2015-06-221-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now the dw_wdt uses a spinlock to protect dw_wdt_open(). The problem is that while holding the spinlock we call: -> dw_wdt_set_top() -> dw_wdt_top_in_seconds() -> clk_get_rate() -> clk_prepare_lock() -> mutex_lock() Locking a mutex while holding a spinlock is not allowed and leads to warnings like "BUG: spinlock wrong CPU on CPU#1", among other problems. There's no reason to use a spinlock. Only dw_wdt_open() was protected and the test_and_set_bit() at the start of that function protects us anyway. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Jisheng Zhang <jszhang@marvell.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imx2_wdt: also set wdog->timeout to new_timeoutMichael Grzeschik2015-06-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Commit faad5de0b104 ("watchdog: imx2_wdt: convert to watchdog core api") removes the custom ioctl function. The generic ioctl handler is not setting the wdog->timeout to the new_timeout but handing this preset value back to the userspace. This patch sets the new value in the drivers set_timeout function to fix that problem. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: Allow compile test of GPIO consumers if !GPIOLIBGeert Uytterhoeven2015-06-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The GPIO subsystem provides dummy GPIO consumer functions if GPIOLIB is not enabled. Hence drivers that depend on GPIOLIB, but use GPIO consumer functionality only, can still be compiled if GPIOLIB is not enabled. Relax the dependency on GPIOLIB if COMPILE_TEST is enabled, where appropriate. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
| * watchdog: cadence: Add dependency on HAS_IOMEMRichard Weinberger2015-06-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Not all architectures have io memory. Fixes: drivers/built-in.o: In function `cdns_wdt_probe': cadence_wdt.c:(.text+0x33b7c9): undefined reference to `devm_ioremap_resource' Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: max63xx_wdt: Constify platform_device_idKrzysztof Kozlowski2015-06-221-1/+1
| | | | | | | | | | | | | | | | | | The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: MAX63XX_WATCHDOG does not depend on ARMVivien Didelot2015-06-221-1/+1
| | | | | | | | | | | | | | | | | | Remove the ARM Kconfig dependency since the Maxim MAX63xx devices are architecture independent. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imgpdc: Add some documentation about the timeoutEzequiel Garcia2015-06-221-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | This watchdog hardware can be configured in terms of power-of-two clock cycles. Therefore, the watchdog timeout configured by the user will be rounded-up to the next possible hardware timeout. This commit adds a comment explaining this. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imgpdc: Fix max timeoutEzequiel Garcia2015-06-221-1/+5
| | | | | | | | | | | | | | | | | | Maximum timeout is currently set in clock cycles, but the watchdog core expects it to be in seconds. Fix it. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imgpdc: Add reboot supportAndrew Bresticker2015-06-221-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | Register a restart handler that will restart the system by writing to the watchdog's SOFT_RESET register. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * watchdog: imgpdc: Set timeout before starting watchdogAndrew Bresticker2015-06-221-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | Set up the watchdog for the specified timeout before attempting to start it. Signed-off-by: Naidu Tellapati <naidu.tellapati@imgtec.com> Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Tested-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com> Cc: James Hogan <james.hogan@imgtec.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 14:03:10 +0100