summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* smsc75xx: add explicit test that device is READYSteve Glendinning2012-09-291-0/+23
| | | | | | | | | | | | This patch adds an explicit test that the READY bit is set on the device when attempting to initialize it. If this bit is clear then the device hasn't succesfully started all its clocks, and this patch helps make the resulting logged error more helpful. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc95xx: add wol magic packet supportSteve Glendinning2012-09-292-8/+182
| | | | | | | | | This patch enables wake from system suspend on magic packet. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc95xx: enable power saving mode during system suspendSteve Glendinning2012-09-292-2/+32
| | | | | | | | | | | | This patch enables the device to enter its lowest power SUSPEND2 state during system suspend, instead of staying up using full power. Patch updated to not add two pointers to .suspend & .resume. Patch updated to replace BUG_ON with WARN_ON_ONCE and return. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc95xx: fix resume when usb device is resetSteve Glendinning2012-09-291-0/+1
| | | | | | | | This patch fixes an issue on some systems, where after suspend the link is re-established but the ethernet interface does not resume. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc95xx: check return code from control messagesSteve Glendinning2012-09-291-183/+148
| | | | | | | | | This patch adds additional checks of the values returned by smsc95xx_(read|write)_reg, and wraps their common patterns in macros. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc95xx: remove unnecessary variablesSteve Glendinning2012-09-292-20/+10
| | | | | | | | | | | Removes unnecessary variables as smsc95xx_write_reg takes its value by parameter. Early versions passed this parameter by reference. Also replace hardcoded interrupt status value with a #define Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* smsc95xx: sleep before read for lengthy operationsSteve Glendinning2012-09-291-2/+2
| | | | | | | | During init, the device reset is unexpected to complete immediately, so sleep before testing the condition rather than after it. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-09-28189-950/+1638
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/net/team/team.c drivers/net/usb/qmi_wwan.c net/batman-adv/bat_iv_ogm.c net/ipv4/fib_frontend.c net/ipv4/route.c net/l2tp/l2tp_netlink.c The team, fib_frontend, route, and l2tp_netlink conflicts were simply overlapping changes. qmi_wwan and bat_iv_ogm were of the "use HEAD" variety. With help from Antonio Quartulli. Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-09-287-15/+40
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David S Miller: 1) Netfilter xt_limit module can use uninitialized rules, from Jan Engelhardt. 2) Wei Yongjun has found several more spots where error pointers were treated as NULL/non-NULL and vice versa. 3) bnx2x was converted to pci_io{,un}map() but one remaining plain iounmap() got missed. From Neil Horman. 4) Due to a fence-post type error in initialization of inetpeer entries (which is where we store the ICMP rate limiting information), we can erroneously drop ICMPs if the inetpeer was created right around when jiffies wraps. Fix from Nicolas Dichtel. 5) smsc75xx resume fix from Steve Glendinnig. 6) LAN87xx smsc chips need an explicit hardware init, from Marek Vasut. 7) qlcnic uses msleep() with locks held, fix from Narendra K. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netdev: octeon: fix return value check in octeon_mgmt_init_phy() inetpeer: fix token initialization qlcnic: Fix scheduling while atomic bug bnx2: Clean up remaining iounmap net: phy: smsc: Implement PHY config_init for LAN87xx smsc75xx: fix resume after device reset netdev: pasemi: fix return value check in pasemi_mac_phy_init() team: fix return value check l2tp: fix return value check netfilter: xt_limit: have r->cost != 0 case work
| | * netdev: octeon: fix return value check in octeon_mgmt_init_phy()Wei Yongjun2012-09-281-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * qlcnic: Fix scheduling while atomic bugNarendra K2012-09-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the device close path, 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' call msleep. But 'qlcnic_fw_destroy_ctx' and 'qlcnic_poll_rsp' are called with 'adapter->tx_clean_lock' spin lock held resulting in scheduling while atomic bug causing the following trace. I observed that the commit 012dc19a45b2b9cc2ebd14aaa401cf782c2abba4 from John Fastabend addresses a similar issue in ixgbevf driver. Adopting the same approach used in the commit, this patch uses mdelay to address the issue. [79884.999115] BUG: scheduling while atomic: ip/30846/0x00000002 [79885.005562] INFO: lockdep is turned off. [79885.009958] Modules linked in: qlcnic fuse nf_conntrack_netbios_ns nf_conntrack_broadcast ipt_MASQUERADE bnep bluetooth rfkill ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter ip6_tables iptable_nat nf_nat iptable_mangle ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables dcdbas coretemp kvm_intel kvm iTCO_wdt ixgbe iTCO_vendor_support crc32c_intel ghash_clmulni_intel nfsd microcode sb_edac pcspkr edac_core dca bnx2x shpchp auth_rpcgss nfs_acl lpc_ich mfd_core mdio lockd libcrc32c wmi acpi_pad acpi_power_meter sunrpc uinput sd_mod sr_mod cdrom crc_t10dif ahci libahci libata megaraid_sas usb_storage dm_mirror dm_region_hash dm_log dm_mod [last unloaded: qlcnic] [79885.083608] Pid: 30846, comm: ip Tainted: G W O 3.6.0-rc7+ #1 [79885.090805] Call Trace: [79885.093569] [<ffffffff816764d8>] __schedule_bug+0x68/0x76 [79885.099699] [<ffffffff8168358e>] __schedule+0x99e/0xa00 [79885.105634] [<ffffffff81683929>] schedule+0x29/0x70 [79885.111186] [<ffffffff81680def>] schedule_timeout+0x16f/0x350 [79885.117724] [<ffffffff811afb7a>] ? init_object+0x4a/0x90 [79885.123770] [<ffffffff8107c190>] ? __internal_add_timer+0x140/0x140 [79885.130873] [<ffffffff81680fee>] schedule_timeout_uninterruptible+0x1e/0x20 [79885.138773] [<ffffffff8107e830>] msleep+0x20/0x30 [79885.144159] [<ffffffffa04c7fbf>] qlcnic_issue_cmd+0xef/0x290 [qlcnic] [79885.151478] [<ffffffffa04c8265>] qlcnic_fw_cmd_destroy_rx_ctx+0x55/0x90 [qlcnic] [79885.159868] [<ffffffffa04c92fd>] qlcnic_fw_destroy_ctx+0x2d/0xa0 [qlcnic] [79885.167576] [<ffffffffa04bf2ed>] __qlcnic_down+0x11d/0x180 [qlcnic] [79885.174708] [<ffffffffa04bf6f8>] qlcnic_close+0x18/0x20 [qlcnic] [79885.181547] [<ffffffff8153b4c5>] __dev_close_many+0x95/0xe0 [79885.187899] [<ffffffff8153b548>] __dev_close+0x38/0x50 [79885.193761] [<ffffffff81545101>] __dev_change_flags+0xa1/0x180 [79885.200419] [<ffffffff81545298>] dev_change_flags+0x28/0x70 [79885.206779] [<ffffffff815531b8>] do_setlink+0x378/0xa00 [79885.212731] [<ffffffff81354fe1>] ? nla_parse+0x31/0xe0 [79885.218612] [<ffffffff815558ee>] rtnl_newlink+0x37e/0x560 [79885.224768] [<ffffffff812cfa19>] ? selinux_capable+0x39/0x50 [79885.231217] [<ffffffff812cbf98>] ? security_capable+0x18/0x20 [79885.237765] [<ffffffff81555114>] rtnetlink_rcv_msg+0x114/0x2f0 [79885.244412] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20 [79885.250280] [<ffffffff81551f87>] ? rtnl_lock+0x17/0x20 [79885.256148] [<ffffffff81555000>] ? __rtnl_unlock+0x20/0x20 [79885.262413] [<ffffffff81570fc1>] netlink_rcv_skb+0xa1/0xb0 [79885.268661] [<ffffffff81551fb5>] rtnetlink_rcv+0x25/0x40 [79885.274727] [<ffffffff815708bd>] netlink_unicast+0x19d/0x220 [79885.281146] [<ffffffff81570c45>] netlink_sendmsg+0x305/0x3f0 [79885.287595] [<ffffffff8152b188>] ? sock_update_classid+0x148/0x2e0 [79885.294650] [<ffffffff81525c2c>] sock_sendmsg+0xbc/0xf0 [79885.300600] [<ffffffff8152600c>] __sys_sendmsg+0x3ac/0x3c0 [79885.306853] [<ffffffff8109be23>] ? up_read+0x23/0x40 [79885.312510] [<ffffffff816896cc>] ? do_page_fault+0x2bc/0x570 [79885.318968] [<ffffffff81191854>] ? sys_brk+0x44/0x150 [79885.324715] [<ffffffff811c458c>] ? fget_light+0x24c/0x520 [79885.330875] [<ffffffff815286f9>] sys_sendmsg+0x49/0x90 [79885.336707] [<ffffffff8168e429>] system_call_fastpath+0x16/0x1b Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * bnx2: Clean up remaining iounmapNeil Horman2012-09-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c0357e975afdbbedab5c662d19bef865f02adc17 modified bnx2 to switch from using ioremap/iounmap to pci_iomap/pci_iounmap. They missed a spot in the error path of bnx2_init_one though. This patch just cleans that up. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Michael Chan <mcan@broadcom.com> CC: "David S. Miller" <davem@davemloft.net> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net: phy: smsc: Implement PHY config_init for LAN87xxMarek Vasut2012-09-281-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LAN8710/LAN8720 chips do have broken the "FlexPWR" smart power-saving capability. Enabling it leads to the PHY not being able to detect Link when cold-started without cable connected. Thus, make sure this is disabled. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christian Hohnstaedt <chohnstaedt@innominate.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * smsc75xx: fix resume after device resetSteve Glendinning2012-09-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some systems this device fails to properly resume after suspend, this patch fixes it by running the usbnet_resume handler. I suspect this also fixes this bug: http://code.google.com/p/chromium-os/issues/detail?id=31871 Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * netdev: pasemi: fix return value check in pasemi_mac_phy_init()Wei Yongjun2012-09-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error, the function of_phy_connect() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * team: fix return value checkWei Yongjun2012-09-271-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of error, the function genlmsg_put() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge tag 'dm-3.6-fixes' of ↵Linus Torvalds2012-09-286-78/+209
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull dm fixes from Alasdair G Kergon: "A few fixes for problems discovered during the 3.6 cycle. Of particular note, are fixes to the thin target's discard support, which I hope is finally working correctly; and fixes for multipath ioctls and device limits when there are no paths." * tag 'dm-3.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm verity: fix overflow check dm thin: fix discard support for data devices dm thin: tidy discard support dm: retain table limits when swapping to new table with no devices dm table: clear add_random unless all devices have it set dm: handle requests beyond end of device instead of using BUG_ON dm mpath: only retry ioctl when no paths if queue_if_no_path set dm thin: do not set discard_zeroes_data
| | * | dm verity: fix overflow checkMikulas Patocka2012-09-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes sector_t overflow checking in dm-verity. Without this patch, the code checks for overflow only if sector_t is smaller than long long, not if sector_t and long long have the same size. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| | * | dm thin: fix discard support for data devicesMike Snitzer2012-09-271-30/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The discard limits that get established for a thin-pool or thin device may be incompatible with the pool's data device. Avoid this by checking the discard limits of the pool's data device. If an incompatibility is found then the pool's 'discard passdown' feature is disabled. Change thin_io_hints to ensure that a thin device always uses the same queue limits as its pool device. Introduce requested_pf to track whether or not the table line originally contained the no_discard_passdown flag and use this directly for table output. We prepare the correct setting for discard_passdown directly in bind_control_target (called from pool_io_hints) and store it in adjusted_pf rather than waiting until we have access to pool->pf in pool_preresume. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| | * | dm thin: tidy discard supportMike Snitzer2012-09-271-25/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A little thin discard code refactoring to make the next patch (dm thin: fix discard support for data devices) more readable. Pull out a couple of functions (and uses bools instead of unsigned for features). No functional changes. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| | * | dm: retain table limits when swapping to new table with no devicesMike Snitzer2012-09-273-1/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a safety net that will re-use the DM device's existing limits in the event that DM device has a temporary table that doesn't have any component devices. This is to reduce the chance that requests not respecting the hardware limits will reach the device. DM recalculates queue limits based only on devices which currently exist in the table. This creates a problem in the event all devices are temporarily removed such as all paths being lost in multipath. DM will reset the limits to the maximum permissible, which can then assemble requests which exceed the limits of the paths when the paths are restored. The request will fail the blk_rq_check_limits() test when sent to a path with lower limits, and will be retried without end by multipath. This became a much bigger issue after v3.6 commit fe86cdcef ("block: do not artificially constrain max_sectors for stacking drivers"). Reported-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| | * | dm table: clear add_random unless all devices have it setMilan Broz2012-09-271-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Always clear QUEUE_FLAG_ADD_RANDOM if any underlying device does not have it set. Otherwise devices with predictable characteristics may contribute entropy. QUEUE_FLAG_ADD_RANDOM specifies whether or not queue IO timings contribute to the random pool. For bio-based targets this flag is always 0 because such devices have no real queue. For request-based devices this flag was always set to 1 by default. Now set it according to the flags on underlying devices. If there is at least one device which should not contribute, set the flag to zero: If a device, such as fast SSD storage, is not suitable for supplying entropy, a request-based queue stacked over it will not be either. Because the checking logic is exactly same as for the rotational flag, share the iteration function with device_is_nonrot(). Signed-off-by: Milan Broz <mbroz@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| | * | dm: handle requests beyond end of device instead of using BUG_ONMike Snitzer2012-09-271-18/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The access beyond the end of device BUG_ON that was introduced to dm_request_fn via commit 29e4013de7ad950280e4b2208 ("dm: implement REQ_FLUSH/FUA support for request-based dm") was an overly drastic (but simple) response to this situation. I have received a report that this BUG_ON was hit and now think it would be better to use dm_kill_unmapped_request() to fail the clone and original request with -EIO. map_request() will assign the valid target returned by dm_table_find_target to tio->ti. But when the target isn't valid tio->ti is never assigned (because map_request isn't called); so add a check for tio->ti != NULL to dm_done(). Reported-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| | * | dm mpath: only retry ioctl when no paths if queue_if_no_path setMike Snitzer2012-09-271-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When there are no paths and multipath receives an ioctl, it waits until a path becomes available. This behaviour is incorrect if the "queue_if_no_path" setting was not specified, as then the ioctl should be rejected immediately, which this patch now does. commit 35991652b ("dm mpath: allow ioctls to trigger pg init") should have checked if queue_if_no_path was configured before queueing IO. Checking for the queue_if_no_path feature, like is done in map_io(), allows the following table load to work without blocking in the multipath_ioctl retry loop: echo "0 1024 multipath 0 0 0 0" | dmsetup create mpath_nodevs Without this fix the multipath_ioctl will block with the following stack trace: blkid D 0000000000000002 0 23936 1 0x00000000 ffff8802b89e5cd8 0000000000000082 ffff8802b89e5fd8 0000000000012440 ffff8802b89e4010 0000000000012440 0000000000012440 0000000000012440 ffff8802b89e5fd8 0000000000012440 ffff88030c2aab30 ffff880325794040 Call Trace: [<ffffffff814ce099>] schedule+0x29/0x70 [<ffffffff814cc312>] schedule_timeout+0x182/0x2e0 [<ffffffff8104dee0>] ? lock_timer_base+0x70/0x70 [<ffffffff814cc48e>] schedule_timeout_uninterruptible+0x1e/0x20 [<ffffffff8104f840>] msleep+0x20/0x30 [<ffffffffa0000839>] multipath_ioctl+0x109/0x170 [dm_multipath] [<ffffffffa06bfb9c>] dm_blk_ioctl+0xbc/0xd0 [dm_mod] [<ffffffff8122a408>] __blkdev_driver_ioctl+0x28/0x30 [<ffffffff8122a79e>] blkdev_ioctl+0xce/0x730 [<ffffffff811970ac>] block_ioctl+0x3c/0x40 [<ffffffff8117321c>] do_vfs_ioctl+0x8c/0x340 [<ffffffff81166293>] ? sys_newfstat+0x33/0x40 [<ffffffff81173571>] sys_ioctl+0xa1/0xb0 [<ffffffff814d70a9>] system_call_fastpath+0x16/0x1b Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org # 3.5+ Acked-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| | * | dm thin: do not set discard_zeroes_dataMike Snitzer2012-09-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dm thin pool target claims to support the zeroing of discarded data areas. This turns out to be incorrect when processing discards that do not exactly cover a complete number of blocks, so the target must always set discard_zeroes_data_unsupported. The thin pool target will zero blocks when they are allocated if the skip_block_zeroing feature is not specified. The block layer may send a discard that only partly covers a block. If a thin pool block is partially discarded then there is no guarantee that the discarded data will get zeroed before it is accessed again. Due to this, thin devices cannot claim discards will always zero data. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Cc: stable@vger.kernel.org # 3.4+ Signed-off-by: Alasdair G Kergon <agk@redhat.com>
| * | | Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2012-09-286-4/+14
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm fixes from Dave Airlie: "The three nouveau fixes quiten unneeded dmesg spam that people are seeing and pondering, The udl fix stops it from trying to driver monitors that are too big, where we get a black screen. And a vmware memory alloc problem." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN drm/udl: limit modes to the sku pixel limits. vmwgfx: corruption in vmw_event_fence_action_create() drm/nvc0/ltcg: mask off intr 0x10 drm/nouveau: silence a debug message triggered by newer userspace
| | * \ \ Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie2012-09-272-2/+4
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Another spurious dmesg quitening. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_EN
| | | * | | drm/nvc0/fifo: ignore bits in PFIFO_INTR that aren't set in PFIFO_INTR_ENBen Skeggs2012-09-272-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PFIFO_INTR = 0x40000000 appears to be a normal case on nvc0/nve0 PFIFO, the binary driver appears to completely ignore it in its PFIFO interrupt handler and even masks off the bit (as we do) in PFIFO_INTR_EN at init time. The bits still light up in the hardware sometimes though, so lets just ignore any bits we haven't explicitely requested. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
| | * | | | drm/udl: limit modes to the sku pixel limits.Dave Airlie2012-09-261-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Otherwise when X starts we commonly get a black screen scanning out nothing, its wierd dpms on/off from userspace brings it back, With this on F18, multi-seat works again with my 1920x1200 monitor which is above the sku limit for the device I have. Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
| | * | | | vmwgfx: corruption in vmw_event_fence_action_create()Dan Carpenter2012-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't allocate enough data for this struct. As soon as we start modifying event->event on the next lines, then we're going beyond the end of the memory we allocated. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@gmail.com>
| | * | | | Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie2012-09-262-1/+2
| | |\| | | | | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes These just silence some printks that we are seeing that we shouldn't * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nvc0/ltcg: mask off intr 0x10 drm/nouveau: silence a debug message triggered by newer userspace
| | | * | drm/nvc0/ltcg: mask off intr 0x10Ben Skeggs2012-09-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NVIDIA do that at startup too on Fermi, so perhaps the heap of 0x10 intrs we receive are normal and we can ignore them. On Kepler NVIDIA *don't* do this, but the hardware appears to come up with the bit masked off by default - so that's probably why :) This should silence some interrupt spam seen on Fermi+ boards. Backported patch from reworked nouveau kernel tree. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
| | | * | drm/nouveau: silence a debug message triggered by newer userspaceBen Skeggs2012-09-261-1/+1
| | | |/ | | | | | | | | | | | | Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
| * | | Merge tag 'usb-3.6-rc7' of ↵Linus Torvalds2012-09-283-6/+5
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg Kroah-Hartman: "Here are two USB bugfixes for your 3.6-rc7 tree. The OHCI fix has been reported a number of times and is a regression from 3.5, and the patch that causes the regression was on the way to the -stable trees before I was reminded (again) that this fix needed to get to your tree soon. The host controller bugfix was reported in older kernels as being pretty easy to trigger, and has been tested by Red Hat and their customers. Both have been in the usb-next branch in the -next tree for a while now, I just cherry-picked them out to get to you in time for the 3.6 release. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'usb-3.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: USB: Fix race condition when removing host controllers USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irq
| | * | | USB: Fix race condition when removing host controllersAlan Stern2012-09-272-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch (as1607) fixes a race that can occur if a USB host controller is removed while a process is reading the /sys/kernel/debug/usb/devices file. The usb_device_read() routine uses the bus->root_hub pointer to determine whether or not the root hub is registered. The is not a valid test, because the pointer is set before the root hub gets registered and remains set even after the root hub is unregistered and deallocated. As a result, usb_device_read() or usb_device_dump() can access freed memory, causing an oops. The patch changes the test to use the hcd->rh_registered flag, which does get set and cleared at the appropriate times. It also makes sure to hold the usb_bus_list_lock mutex while setting the flag, so that usb_device_read() will become aware of new root hubs as soon as they are registered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Don Zickus <dzickus@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | | USB: ohci-at91: fix null pointer in ohci_hcd_at91_overcurrent_irqJoachim Eastwood2012-09-271-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following NULL pointer dereference: [ 7.740000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 7.810000] Unable to handle kernel NULL pointer dereference at virtual address 00000028 [ 7.810000] pgd = c3a38000 [ 7.810000] [00000028] *pgd=23a8c831, *pte=00000000, *ppte=00000000 [ 7.810000] Internal error: Oops: 17 [#1] PREEMPT ARM [ 7.810000] Modules linked in: ohci_hcd(+) regmap_i2c snd_pcm usbcore snd_page_alloc at91_cf snd_timer pcmcia_rsrc snd soundcore gpio_keys regmap_spi pcmcia_core usb_common nls_base [ 7.810000] CPU: 0 Not tainted (3.6.0-rc6-mpa+ #264) [ 7.810000] PC is at __gpio_to_irq+0x18/0x40 [ 7.810000] LR is at ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd] [ 7.810000] pc : [<c01392d4>] lr : [<bf08f694>] psr: 40000093 [ 7.810000] sp : c3a11c40 ip : c3a11c50 fp : c3a11c4c [ 7.810000] r10: 00000000 r9 : c02dcd6e r8 : fefff400 [ 7.810000] r7 : 00000000 r6 : c02cc928 r5 : 00000030 r4 : c02dd168 [ 7.810000] r3 : c02e7350 r2 : ffffffea r1 : c02cc928 r0 : 00000000 [ 7.810000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 7.810000] Control: c000717f Table: 23a38000 DAC: 00000015 [ 7.810000] Process modprobe (pid: 285, stack limit = 0xc3a10270) [ 7.810000] Stack: (0xc3a11c40 to 0xc3a12000) [ 7.810000] 1c40: c3a11c6c c3a11c50 bf08f694 c01392cc c3a11c84 c2c38b00 c3806900 00000030 [ 7.810000] 1c60: c3a11ca4 c3a11c70 c0051264 bf08f680 c3a11cac c3a11c80 c003e764 c3806900 [ 7.810000] 1c80: c2c38b00 c02cb05c c02cb000 fefff400 c3806930 c3a11cf4 c3a11cbc c3a11ca8 [ 7.810000] 1ca0: c005142c c005123c c3806900 c3805a00 c3a11cd4 c3a11cc0 c0053f24 c00513e4 [ 7.810000] 1cc0: c3a11cf4 00000030 c3a11cec c3a11cd8 c005120c c0053e88 00000000 00000000 [ 7.810000] 1ce0: c3a11d1c c3a11cf0 c00124d0 c00511e0 01400000 00000001 00000012 00000000 [ 7.810000] 1d00: ffffffff c3a11d94 00000030 00000000 c3a11d34 c3a11d20 c005120c c0012438 [ 7.810000] 1d20: c001dac4 00000012 c3a11d4c c3a11d38 c0009b08 c00511e0 c00523fc 60000013 [ 7.810000] 1d40: c3a11d5c c3a11d50 c0008510 c0009ab4 c3a11ddc c3a11d60 c0008eb4 c00084f0 [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff c3a11dec c3a11db8 00000000 c2c38b00 bf08f670 c3806900 [ 7.810000] 1dc0: 00000000 00000080 c02cc928 00000030 c3a11e0c c3a11de0 c0052764 c00520d8 [ 7.810000] 1de0: c3a11dfc 00000000 00000000 00000002 bf090f61 00000004 c02cc930 c02cc928 [ 7.810000] 1e00: c3a11e4c c3a11e10 bf090978 c005269c bf090f61 c02cc928 bf093000 c02dd170 [ 7.810000] 1e20: c3a11e3c c02cc930 c02cc930 bf0911d0 bf0911d0 bf093000 c3a10000 00000000 [ 7.810000] 1e40: c3a11e5c c3a11e50 c0155b7c bf090808 c3a11e7c c3a11e60 c0154690 c0155b6c [ 7.810000] 1e60: c02cc930 c02cc964 bf0911d0 c3a11ea0 c3a11e9c c3a11e80 c015484c c01545e8 [ 7.810000] 1e80: 00000000 00000000 c01547e4 bf0911d0 c3a11ec4 c3a11ea0 c0152e58 c01547f4 [ 7.810000] 1ea0: c381b88c c384ab10 c2c10540 bf0911d0 00000000 c02d7518 c3a11ed4 c3a11ec8 [ 7.810000] 1ec0: c01544c0 c0152e0c c3a11efc c3a11ed8 c01536cc c01544b0 bf091075 c3a11ee8 [ 7.810000] 1ee0: bf049af0 bf09120c bf0911d0 00000000 c3a11f1c c3a11f00 c0154e9c c0153628 [ 7.810000] 1f00: bf049af0 bf09120c 000ae190 00000000 c3a11f2c c3a11f20 c0155f58 c0154e04 [ 7.810000] 1f20: c3a11f44 c3a11f30 bf093054 c0155f1c 00000000 00006a4f c3a11f7c c3a11f48 [ 7.810000] 1f40: c0008638 bf093010 bf09120c 000ae190 00000000 c00093c4 00006a4f bf09120c [ 7.810000] 1f60: 000ae190 00000000 c00093c4 00000000 c3a11fa4 c3a11f80 c004fdc4 c000859c [ 7.810000] 1f80: c3a11fa4 000ae190 00006a4f 00016eb8 000ad018 00000080 00000000 c3a11fa8 [ 7.810000] 1fa0: c0009260 c004fd58 00006a4f 00016eb8 000ae190 00006a4f 000ae100 00000000 [ 7.810000] 1fc0: 00006a4f 00016eb8 000ad018 00000080 000adba0 000ad208 00000000 000ad3d8 [ 7.810000] 1fe0: beaf7ae8 beaf7ad8 000172b8 b6e4e940 20000010 000ae190 00000000 00000000 [ 7.810000] Backtrace: [ 7.810000] [<c01392bc>] (__gpio_to_irq+0x0/0x40) from [<bf08f694>] (ohci_hcd_at91_overcurrent_irq+0x24/0xb4 [ohci_hcd]) [ 7.810000] [<bf08f670>] (ohci_hcd_at91_overcurrent_irq+0x0/0xb4 [ohci_hcd]) from [<c0051264>] (handle_irq_event_percpu+0x38/0x1a8) [ 7.810000] r6:00000030 r5:c3806900 r4:c2c38b00 [ 7.810000] [<c005122c>] (handle_irq_event_percpu+0x0/0x1a8) from [<c005142c>] (handle_irq_event+0x58/0x7c) [ 7.810000] [<c00513d4>] (handle_irq_event+0x0/0x7c) from [<c0053f24>] (handle_simple_irq+0xac/0xd8) [ 7.810000] r5:c3805a00 r4:c3806900 [ 7.810000] [<c0053e78>] (handle_simple_irq+0x0/0xd8) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] r4:00000030 [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c00124d0>] (gpio_irq_handler+0xa8/0xfc) [ 7.810000] r4:00000000 [ 7.810000] [<c0012428>] (gpio_irq_handler+0x0/0xfc) from [<c005120c>] (generic_handle_irq+0x3c/0x48) [ 7.810000] [<c00511d0>] (generic_handle_irq+0x0/0x48) from [<c0009b08>] (handle_IRQ+0x64/0x88) [ 7.810000] r4:00000012 [ 7.810000] [<c0009aa4>] (handle_IRQ+0x0/0x88) from [<c0008510>] (at91_aic_handle_irq+0x30/0x38) [ 7.810000] r5:60000013 r4:c00523fc [ 7.810000] [<c00084e0>] (at91_aic_handle_irq+0x0/0x38) from [<c0008eb4>] (__irq_svc+0x34/0x60) [ 7.810000] Exception stack(0xc3a11d60 to 0xc3a11da8) [ 7.810000] 1d60: 00000000 00000030 00000000 00000080 60000013 bf08f670 c3806900 c2c38b00 [ 7.810000] 1d80: 00000030 c3806930 00000000 c3a11ddc c3a11d88 c3a11da8 c0054190 c00523fc [ 7.810000] 1da0: 60000013 ffffffff [ 7.810000] [<c00520c8>] (__setup_irq+0x0/0x458) from [<c0052764>] (request_threaded_irq+0xd8/0x134) [ 7.810000] [<c005268c>] (request_threaded_irq+0x0/0x134) from [<bf090978>] (ohci_hcd_at91_drv_probe+0x180/0x41c [ohci_hcd]) [ 7.810000] [<bf0907f8>] (ohci_hcd_at91_drv_probe+0x0/0x41c [ohci_hcd]) from [<c0155b7c>] (platform_drv_probe+0x20/0x24) [ 7.810000] [<c0155b5c>] (platform_drv_probe+0x0/0x24) from [<c0154690>] (driver_probe_device+0xb8/0x20c) [ 7.810000] [<c01545d8>] (driver_probe_device+0x0/0x20c) from [<c015484c>] (__driver_attach+0x68/0x88) [ 7.810000] r7:c3a11ea0 r6:bf0911d0 r5:c02cc964 r4:c02cc930 [ 7.810000] [<c01547e4>] (__driver_attach+0x0/0x88) from [<c0152e58>] (bus_for_each_dev+0x5c/0x9c) [ 7.810000] r6:bf0911d0 r5:c01547e4 r4:00000000 [ 7.810000] [<c0152dfc>] (bus_for_each_dev+0x0/0x9c) from [<c01544c0>] (driver_attach+0x20/0x28) [ 7.810000] r7:c02d7518 r6:00000000 r5:bf0911d0 r4:c2c10540 [ 7.810000] [<c01544a0>] (driver_attach+0x0/0x28) from [<c01536cc>] (bus_add_driver+0xb4/0x22c) [ 7.810000] [<c0153618>] (bus_add_driver+0x0/0x22c) from [<c0154e9c>] (driver_register+0xa8/0x144) [ 7.810000] r7:00000000 r6:bf0911d0 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0154df4>] (driver_register+0x0/0x144) from [<c0155f58>] (platform_driver_register+0x4c/0x60) [ 7.810000] r7:00000000 r6:000ae190 r5:bf09120c r4:bf049af0 [ 7.810000] [<c0155f0c>] (platform_driver_register+0x0/0x60) from [<bf093054>] (ohci_hcd_mod_init+0x54/0x8c [ohci_hcd]) [ 7.810000] [<bf093000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c0008638>] (do_one_initcall+0xac/0x174) [ 7.810000] r4:00006a4f [ 7.810000] [<c000858c>] (do_one_initcall+0x0/0x174) from [<c004fdc4>] (sys_init_module+0x7c/0x1a0) [ 7.810000] [<c004fd48>] (sys_init_module+0x0/0x1a0) from [<c0009260>] (ret_fast_syscall+0x0/0x2c) [ 7.810000] r7:00000080 r6:000ad018 r5:00016eb8 r4:00006a4f [ 7.810000] Code: e24cb004 e59f3028 e1a02000 e7930180 (e5903028) [ 7.810000] ---[ end trace 85aa37ed128143b5 ]--- [ 7.810000] Kernel panic - not syncing: Fatal exception in interrupt Commit 6fffb77c (USB: ohci-at91: fix PIO handling in relation with number of ports) started setting unused pins to EINVAL. But this exposed a bug in the ohci_hcd_at91_overcurrent_irq function where the gpio was used without being checked to see if it is valid. This patches fixed the issue by adding the gpio valid check. Signed-off-by: Joachim Eastwood <joachim.eastwood@jotron.com> Cc: stable <stable@vger.kernel.org> # [3.4+] whereever 6fffb77c went Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Merge tag 'gpio-fixes-v3.6' of ↵Linus Torvalds2012-09-281-0/+5
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "A late GPIO fix: Roland Stigge found a problem in the LPC32xx driver where a callback ignores one of its arguments. It needs to go into stable too so sending this upstream immediately." * tag 'gpio-fixes-v3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio-lpc32xx: Fix value handling of gpio_direction_output()
| | * | | | gpio-lpc32xx: Fix value handling of gpio_direction_output()Roland Stigge2012-09-241-0/+5
| | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For GPIOs of gpio-lpc32xx, gpio_direction_output() ignores the value argument (initial value of output). This patch fixes this by setting the level accordingly. Cc: stable@kernel.org Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | Merge tag 'md-3.6-fixes' of git://neil.brown.name/mdLinus Torvalds2012-09-282-3/+6
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull two md bugfixes from NeilBrown: "One (missing spinlock init) was only introduced recently. The other has been present as long as raid10 has been supported, so is tagged for -stable." * tag 'md-3.6-fixes' of git://neil.brown.name/md: md/raid10: fix "enough" function for detecting if array is failed. md/raid5: add missing spin_lock_init.
| | * | | | md/raid10: fix "enough" function for detecting if array is failed.NeilBrown2012-09-271-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'enough' function is written to work with 'near' arrays only in that is implicitly assumes that the offset from one 'group' of devices to the next is the same as the number of copies. In reality it is the number of 'near' copies. So change it to make this number explicit. This bug makes it possible to run arrays without enough drives present, which is dangerous. It is appropriate for an -stable kernel, but will almost certainly need to be modified for some of them. Cc: stable@vger.kernel.org Reported-by: Jakub Husák <jakub@gooseman.cz> Signed-off-by: NeilBrown <neilb@suse.de>
| | * | | | md/raid5: add missing spin_lock_init.NeilBrown2012-09-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit b17459c05000fdbe8d10946570a26510f86ec0f raid5: add a per-stripe lock added a spin_lock to the 'stripe_head' struct. Unfortunately there are two places where this struct is allocated but the spin lock was only initialised in one of them. So add the missing spin_lock_init. Signed-off-by: NeilBrown <neilb@suse.de>
| * | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds2012-09-283-4/+9
| |\ \ \ \ \ | | |_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull EDAC fixes from Mauro Carvalho Chehab: "Three edac fixes at the memory enumeration logic: - i3200_edac: Fixes a regression at the memory rank size, when the memorias are dual-rank; - i5000_edac: Fix a longstanding bug when calculating the memory size: before Kernel 3.6, the memory size were right only with one specific configuration; - sb_edac: Fixes a bug since the initial release of the driver: with 16GB DIMMs, there's an overflow at the memory size, causing the number of pages per dimm (an unsigned value) to have the highest bit equal to 1, effectively mangling the memory size. The third bug can potentially affect the error decoding logic as well." * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: sb_edac: Avoid overflow errors at memory size calculation i5000: Fix the memory size calculation with 2R memories i3200_edac: Fix memory rank size
| | * | | | sb_edac: Avoid overflow errors at memory size calculationMauro Carvalho Chehab2012-09-251-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Sandy bridge EDAC is calculating the memory size with overflow. Basically, the size field and the integer calculation is using 32 bits. More bits are needed, when the DIMM memories have high density. The net result is that memories are improperly reported there, when high-density DIMMs are used: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 0, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 591: mc#0: channel 1, dimm 0, -16384 Mb (-4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 As the number of pages value is handled at the EDAC core as unsigned ints, the driver shows the 16 GB memories at sysfs interface as 16760832 MB! The fix is simple: calculate the number of pages as unsigned 64-bits integer. After the patch, the memory size (16 GB) is properly detected: EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 0, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 EDAC DEBUG: in drivers/edac/sb_edac.c, line at 592: mc#0: channel 1, dimm 0, 16384 Mb (4194304 pages) bank: 8, rank: 2, row: 0x10000, col: 0x800 Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| | * | | | i5000: Fix the memory size calculation with 2R memoriesMauro Carvalho Chehab2012-09-251-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When 2R memories are found, the memory size should be multiplied by two, otherwise, it will report half of the memory size: +-----------------------------------------------+ | mc0 | | branch0 | branch1 | | channel0 | channel1 | channel0 | channel1 | -------+-----------------------------------------------+ slot3: | 0 MB | 0 MB | 0 MB | 0 MB | slot2: | 0 MB | 0 MB | 0 MB | 0 MB | -------+-----------------------------------------------+ slot1: | 0 MB | 0 MB | 0 MB | 0 MB | slot0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | -------+-----------------------------------------------+ (the above machine have 4 x 2GB 2R memories) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| | * | | | i3200_edac: Fix memory rank sizeMauro Carvalho Chehab2012-09-251-1/+1
| | | |/ / | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | commit a895bf8b1e1ea4c032a8fa8a09475a2ce09fe77a incorrectly changed the logic that fills the memory bank size. Fix it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
| * | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-09-255-18/+64
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull more networking fixes from David Miller: 1) Eric Dumazet discovered and fixed what turned out to be a family of bugs. These functions were using pskb_may_pull() which might need to reallocate the linear SKB data buffer, but the callers were not expecting this possibility. The callers have cached pointers to the packet header areas, and would need to reload them if we were to continue using pskb_may_pull(). So they could end up reading garbage. It's easier to just change these RAW4/RAW6/MIP6 routines to use skb_header_pointer() instead of pskb_may_pull(), which won't modify the linear SKB data area. 2) Dave Jone's syscall spammer caught a case where a non-TCP socket can call down into the TCP keepalive code. The case basically involves creating a raw socket with sk_protocol == IPPROTO_TCP, then calling setsockopt(sock_fd, SO_KEEPALIVE, ...) Fixed by Eric Dumazet. 3) Bluetooth devices do not get configured properly while being powered on, resulting in always using legacy pairing instead of SSP. Fix from Andrzej Kaczmarek. 4) Bluetooth cancels delayed work erroneously, put stricter checks in place. From Andrei Emeltchenko. 5) Fix deadlock between cfg80211_mutex and reg_regdb_search_mutex in cfg80211, from Luis R. Rodriguez. 6) Fix interrupt double release in iwlwifi, from Emmanuel Grumbach. 7) Missing module license in bcm87xx driver, from Peter Huewe. 8) Team driver can lose port changed events when adding devices to a team, fix from Jiri Pirko. 9) Fix endless loop when trying ot unregister PPPOE device in zombie state, from Xiaodong Xu. 10) batman-adv layer needs to set MAC address of software device earlier, otherwise we call tt_local_add with it uninitialized. 11) Fix handling of KSZ8021 PHYs, it's matched currently by KS8051 but that doesn't program the device properly. From Marek Vasut. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: mip6: fix mip6_mh_filter() ipv6: raw: fix icmpv6_filter() net: guard tcp_set_keepalive() to tcp sockets phy/micrel: Add missing header to micrel_phy.h phy/micrel: Rename KS80xx to KSZ80xx phy/micrel: Implement support for KSZ8021 batman-adv: Fix symmetry check / route flapping in multi interface setups batman-adv: Fix change mac address of soft iface. pppoe: drop PPPOX_ZOMBIEs in pppoe_release team: send port changed when added ipv4: raw: fix icmp_filter() net/phy/bcm87xx: Add MODULE_LICENSE("GPL") to GPL driver iwlwifi: don't double free the interrupt in failure path cfg80211: fix possible circular lock on reg_regdb_search() Bluetooth: Fix not removing power_off delayed work Bluetooth: Fix freeing uninitialized delayed works Bluetooth: mgmt: Fix enabling LE while powered off Bluetooth: mgmt: Fix enabling SSP while powered off
| | * \ \ \ Merge branch 'for-davem' of ↵David S. Miller2012-09-251-0/+1
| | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== Please pull this last(?) batch of fixes intended for 3.6... For the Bluetooth bits, Gustavo says this: "Here goes probably my last update to 3.6. It includes the two patches you were ok last week(from Andrzej Kaczmarek), those are critical ones, and two other fixes one for a system crash and the other for a missing lockdep annotation." The referenced fixes from Andrzej prevent attempts to configure devices that are powered-off. Along with the Bluetooth fixes, there are a couple of 802.11 fixes. Emmanuel Grumbach gives us an iwlwifi fix to prevent releasing an interrupt twice. Luis R. Rodriguez provides a fix for a possible circular lock dependency in the cfg80211 regulatory enforcement code. All of these have been in linux-next for a few days. I hope they are not too late to make the 3.6 release! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | | * \ \ \ Merge branch 'master' of ↵John W. Linville2012-09-221-0/+1
| | | |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| | | | * | | | iwlwifi: don't double free the interrupt in failure pathEmmanuel Grumbach2012-09-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the driver can't get the HW ready, we would release the interrupt twice which made the kernel complain loudly. Cc: stable@vger.kernel.org Reported-by: Brian Cockrell <brian.cockrell@intel.com> Tested-by: Brian Cockrell <brian.cockrell@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | | | | | phy/micrel: Rename KS80xx to KSZ80xxMarek Vasut2012-09-241-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is no such part as KS8001, KS8041 or KS8051. There are only KSZ8001, KSZ8041 and KSZ8051. Rename these parts as such to match the Micrel naming. Signed-off-by: Marek Vasut <marex@denx.de> Cc: David J. Choi <david.choi@micrel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Cc: Linux ARM kernel <linux-arm-kernel@lists.infradead.org> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 17:18:46 +0100