summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* PCI pciehp: fix power fault interrupt storm problemKenji Kaneshige2009-11-252-36/+17
| | | | | | | | | | | | | | | | | Enabling power fault detected event notification in current pciehp might cause power fault interrupt storm on some machines. On those machines. On those machines, power fault detected bit in the slot status register was set again immediately when it is cleared in the interrupt service routine, and next power fault detected interrupt was notified again. Therefore, disable power fault detected event notification for now. This patch also removes unnecessary handling for power fault cleared event because this event is not supported by PCIe spec. Tested-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: use pci_is_pcie()Kenji Kaneshige2009-11-251-1/+1
| | | | | | | | Change for PCI hotplug to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe AER: use pci_is_pcie()Kenji Kaneshige2009-11-252-3/+3
| | | | | | | | Changes for PCIe AER driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe ASPM: use pci_is_pcie()Kenji Kaneshige2009-11-251-9/+12
| | | | | | | | Change for PCIe ASPM driver to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: use pci_is_pcie() in pci coreKenji Kaneshige2009-11-257-16/+16
| | | | | | | | Change for PCI core to use pci_is_pcie() instead of checking pci_dev->is_pcie. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* pciehp: use pci_pcie_cap()Kenji Kaneshige2009-11-253-25/+25
| | | | | | | | | | | Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in pciehp driver. This avoids unnecessary search in PCI configuration space. This patch also removes 'cap_base' field in struct controller, that was used to hold PCIe capability offset by pciehp itself. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: use pci_pcie_cap()Kenji Kaneshige2009-11-251-1/+1
| | | | | | | | | Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI hotplug core. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe ASPM: use pci_pcie_cap()Kenji Kaneshige2009-11-251-10/+10
| | | | | | | | | Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe ASPM driver. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe port bus: use pci_pcie_cap()Kenji Kaneshige2009-11-251-7/+7
| | | | | | | | | Use pci_pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI Express Port Bus driver. This avoids unnecessary serarch in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCIe AER: use pci_pcie_cap()Kenji Kaneshige2009-11-252-5/+5
| | | | | | | | | Use pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCIe AER driver. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: use pci_pcie_cap() in pci coreKenji Kaneshige2009-11-252-8/+8
| | | | | | | | | Use pcie_cap() instead of pci_find_capability() to get PCIe capability offset in PCI core code. This avoids unnecessary search in PCI configuration space. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: allow matching of prefetchable resources to non-prefetchable windowsLinus Torvalds2009-11-111-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I'm not entirely sure it needs to go into 32, but it's probably the right thing to do. Another way of explaining the patch is: - we currently pick the _first_ exactly matching bus resource entry, but the _last_ inexactly matching one. Normally first/last shouldn't matter, but bus resource entries aren't actually all created equal: in a transparent bus, the last resources will be the parent resources, which we should generally try to avoid unless we have no choice. So "first matching" is the thing we should always aim for. - the patch is a bit bigger than it needs to be, because I simplified the logic at the same time. It used to be a fairly incomprehensible if ((res->flags & IORESOURCE_PREFETCH) && !(r->flags & IORESOURCE_PREFETCH)) best = r; /* Approximating prefetchable by non-prefetchable */ and technically, all the patch did was to make that complex choice be even more complex (it basically added a "&& !best" to say that if we already gound a non-prefetchable window for the prefetchable resource, then we won't override an earlier one with that later one: remember "first matching"). - So instead of that complex one with three separate conditionals in one, I split it up a bit, and am taking advantage of the fact that we already handled the exact case, so if 'res->flags' has the PREFETCH bit, then we already know that 'r->flags' will _not_ have it. So the simplified code drops the redundant test, and does the new '!best' test separately. It also uses 'continue' as a way to ignore the bus resource we know doesn't work (ie a prefetchable bus resource is _not_ acceptable for anything but an exact match), so it turns into: /* We can't insert a non-prefetch resource inside a prefetchable parent .. */ if (r->flags & IORESOURCE_PREFETCH) continue; /* .. but we can put a prefetchable resource inside a non-prefetchable one */ if (!best) best = r; instead. With the comments, it's now six lines instead of two, but it's conceptually simpler, and I _could_ have written it as two lines: if ((res->flags & IORESOURCE_PREFETCH) && !best) best = r; /* Approximating prefetchable by non-prefetchable */ but I thought that was too damn subtle. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: Replace old style lock initializerThomas Gleixner2009-11-071-1/+1
| | | | | | | | | SPIN_LOCK_UNLOCKED is deprecated. Use DEFINE_SPINLOCK instead. Make the lock static while at it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: fix oshp evaluationKenji Kaneshige2009-11-061-2/+3
| | | | | | | | | If firmware doesn't grant over native hotplug control through ACPI _OSC method, we must not evaluate OSHP. Acked-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: derive nearby CPUs from device's instead of bus' NUMA informationAndreas Herrmann2009-11-061-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of AMD CPU northbridge functions this NUMA information might differ. Here is an example from a 4-socket system. Currently Linux shows root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat numa_node 0 root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat local_cpu* 0-3 00000000,0000000f which is not correct for northbridge functions as the local CPUs are those of the same socket. With this patch and a quirk for AMD CPU NB functions Linux can do better and correctly show root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat numa_node 2 root@hagen:/sys/devices/pci0000:00/0000:00:1a.4# cat local_cpu* 8-11 00000000,00000f00 Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: cache PCIe capability offsetKenji Kaneshige2009-11-061-0/+1
| | | | | | | | | | | There are a lot of codes that searches PCI express capability offset in the PCI configuration space using pci_find_capability(). Caching it in the struct pci_dev will reduce unncecessary search. This patch adds an additional 'pcie_cap' fields into struct pci_dev, which is initialized at pci device scan time (in set_pcie_port_type()). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: improve discovery/configuration messagesBjorn Helgaas2009-11-044-39/+57
| | | | | | | | | | | This makes PCI resource management messages more consistent and adds a few new messages to aid debugging. Whenever we assign resources to a device, update a BAR, or change a bridge aperture, it's worth noting it. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: replace pr_debug with dev_dbgBjorn Helgaas2009-11-041-8/+7
| | | | | | | | | Since we have a struct device, we might as well use dev_printk. Note that both pr_debug() and dev_dbg() are completely compiled out unless DEBUG or DYNAMIC_DEBUG is defined. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: make PME# messages KERN_DEBUGBjorn Helgaas2009-11-041-2/+3
| | | | | | | | Messages about PME# being supported and enabled/disabled are probably useful for debug, but maybe don't need to be on the console. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: remove pci_find_slot from PCI_LEGACY config descriptionThadeu Lima de Souza Cascardo2009-11-041-4/+4
| | | | | | | | | Commit 3b073eda has removed pci_find_slot, so there's no point in mentioning it in the config description as one of the deprecated APIs there are enabled by PCI_LEGACY and still used by some drivers. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* vsprintf: use %pR, %pr instead of %pRt, %pRfBjorn Helgaas2009-11-049-70/+67
| | | | | | | | | | | | | | | | | Jesse accidentally applied v1 [1] of the patchset instead of v2 [2]. This is the diff between v1 and v2. The changes in this patch are: - tidied vsprintf stack buffer to shrink and compute size more accurately - use %pR for decoding and %pr for "raw" (with type and flags) instead of adding %pRt and %pRf [1] http://lkml.org/lkml/2009/10/6/491 [2] http://lkml.org/lkml/2009/10/13/441 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: avoid boot interrupt quirk for AMD 813x B1 devicesStefan Assmann2009-11-041-3/+7
| | | | | | | | | | | | | AMD 813x rev. B1 (like rev. B2) devices generate no interrupts if quirk_disable_amd_813x_boot_interrupt is executed, add an exception. http://bugzilla.kernel.org/show_bug.cgi?id=14159 Patch also adds missing cases for DECLARE_PCI_FIXUP_RESUME and DECLARE_PCI_FIXUP_FINAL calls to quirk_disable_amd_813x_boot_interrupt. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Tested-by: Gabriele Giorgetti <g.giorgetti@teamsystem.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI Hotplug: acpiphp: clean up list traversalsAlex Chiang2009-11-041-41/+17
| | | | | | | | Using list_for_each_entry instead of list_for_each allows us to enhance readability and minorly reduce some stack usage. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: move IOAPIC support from acpiphp to ioapic driverBjorn Helgaas2009-11-045-196/+136
| | | | | | | | | | | | | | | | | | | | | | | This patch moves PCI I/O APIC support from acpiphp to a separate driver. Like pciehp and shpchp, acpiphp handles PCI hotplug, i.e., addition and removal of PCI adapters. But in addition, acpiphp handles some ACPI hotplug, such as the addition of new host bridges, and the I/O APIC support was tangled up with that. I don't think the I/O APIC support needs to be in acpiphp; PCI I/O APICs usually appear as a function on a PCI host bridge, and we'll enumerate the APIC before any of the devices behind the bridge that use it. As far as I know, nobody actually uses I/O APIC hotplug. It depends on acpi_register_ioapic(), which is only implemented for ia64, and I don't think any vendors have supported I/O chassis hotplug yet. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> CC: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> CC: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix memory leak in aer_injectAndrew Patterson2009-11-041-1/+1
| | | | | | | | | Fixed probable typo in aer_inject cleanup code resulting in a memory leak. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: use better error return values in aer_injectAndrew Patterson2009-11-041-4/+4
| | | | | | | | | Replaced some error return values in aer_inject. Use -ENODEV when we can't find a device and -ENOTTY when the device does not support PCIe AER. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add support for PCI domains to aer_injectAndrew Patterson2009-11-041-12/+34
| | | | | | | | Add support for PCI domains (segments) to aer_inject. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add pci_get_domain_bus_and_slot functionAndrew Patterson2009-11-041-17/+17
| | | | | | | | | | | | | | | | Added the pci_get_domain_and_slot_function which is analogous to pci_get_bus_and_slot. It returns a pci_dev given a domain (segment) number, bus number, and devnr. Like pci_get_bus_and_slot, pci_get_domain_bus_and_slot holds a reference to the returned pci_dev. Converted pci_get_bus_and_slot to a wrapper that calls pci_get_domain_bus_and_slot with the domain hard-coded to 0. This routine was patterned off code suggested by Bjorn Helgaas. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Andrew Patterson <andrew.patterson@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: populate subsystem vendor and device IDs for PCI bridgesGabe Black2009-11-041-0/+6
| | | | | | | | | Change to populate the subsystem vendor and subsytem device IDs for PCI-PCI bridges that implement the PCI Subsystem Vendor ID capability. Previously bridges left subsystem vendor IDs unpopulated. Signed-off-by: Gabe Black <gabe.black@ni.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: PCIe AER: honor ACPI HEST FIRMWARE FIRST modeMatt Domsch2009-11-044-2/+166
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Feedback from Hidetoshi Seto and Kenji Kaneshige incorporated. This correctly handles PCI-X bridges, PCIe root ports and endpoints, and prints debug messages when invalid/reserved types are found in the HEST. PCI devices not in domain/segment 0 are not represented in HEST, thus will be ignored. Today, the PCIe Advanced Error Reporting (AER) driver attaches itself to every PCIe root port for which BIOS reports it should, via ACPI _OSC. However, _OSC alone is insufficient for newer BIOSes. Part of ACPI 4.0 is the new APEI (ACPI Platform Error Interfaces) which is a way for OS and BIOS to handshake over which errors for which components each will handle. One table in ACPI 4.0 is the Hardware Error Source Table (HEST), where BIOS can define that errors for certain PCIe devices (or all devices), should be handled by BIOS ("Firmware First mode"), rather than be handled by the OS. Dell PowerEdge 11G server BIOS defines Firmware First mode in HEST, so that it may manage such errors, log them to the System Event Log, and possibly take other actions. The aer driver should honor this, and not attach itself to devices noted as such. Furthermore, Kenji Kaneshige reminded us to disallow changing the AER registers when respecting Firmware First mode. Platform firmware is expected to manage these, and if changes to them are allowed, it could break that firmware's behavior. The HEST parsing code may be replaced in the future by a more feature-rich implementation. This patch provides the minimum needed to prevent breakage until that implementation is available. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: prevent unnecessary power offKenji Kaneshige2009-11-041-16/+10
| | | | | | | | Prevent unnecessary power off at initialization time. If slot power is already off, we don't need to power off the slot. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: fix typo in pciehp_probeKenji Kaneshige2009-11-041-1/+1
| | | | | | | Fix typo that might cause memory leak in pciehp_probe(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: return error on read/write failureKenji Kaneshige2009-11-043-92/+22
| | | | | | | | | | | | | Current pciehp returns successfully on read/write failure with dummy state values. It should return error instead. With this patch, pciehp no longer uses hotplug_slot_info data structure. So this also removes hotplug_slot_info related code. But note that it still allocates hotplug_slot_info because it is required by pci hotplug core. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: create files only for existing capabilitiesKenji Kaneshige2009-11-041-16/+22
| | | | | | | | | | Current pciehp driver creates 'attention' and 'latch' files even if the controller doesn't support them. In this case, the contents of those files are meaningless and unpredictable. Those files should be created only if the controller has the corresponding capabilities. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: remove wrong workaround for bad DLLPKenji Kaneshige2009-11-041-50/+3
| | | | | | | | Remove wrong workaround for BAD DLLP error, which confused surprise down error with DLL errors. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pciehp: disable DLL state changed event notificationKenji Kaneshige2009-11-041-1/+2
| | | | | | | | | Current pciehp doesn't handle Data Link Layer State Changed Event notification. So it needs to be disabled at initialization time, otherwise other event notifications are not generated. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: fix nit in ROM BAR size probingMichael S. Tsirkin2009-11-041-2/+2
| | | | | | | | | | | | When probing for ROM BAR size, we should not change bits 1:10 in this BAR, because these bits are marked as "reserved for future use" in PCI spec, so changing them might have side effects. No such issue for I/O or memory, as there is an implementation note in PCI spec which explicitly allows writing 0xfffffffff there. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: add xen dom0 checking before ACS initializationAllen Kay2009-11-041-1/+2
| | | | | | | | | This patch is predicated on Jeremy's patch in include/xen/xen.h. It'll prevent ACS init unless the platform has both an IOMMU and we're running as dom0. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: acs p2p upsteram forwarding enablingAllen Kay2009-11-043-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Note: dom0 checking in v4 has been separated out into 2/2. This patch enables P2P upstream forwarding in ACS capable PCIe switches. It solves two potential problems in virtualization environment where a PCIe device is assigned to a guest domain using a HW iommu such as VT-d: 1) Unintentional failure caused by guest physical address programmed into the device's DMA that happens to match the memory address range of other downstream ports in the same PCIe switch. This causes the PCI transaction to go to the matching downstream port instead of go to the root complex to get translated by VT-d as it should be. 2) Malicious guest software intentionally attacks another downstream PCIe device by programming the DMA address into the assigned device that matches memory address range of the downstream PCIe port. We are in process of implementing device filtering software in KVM/XEN management software to allow device assignment of PCIe devices behind a PCIe switch only if it has ACS capability and with the P2P upstream forwarding bits enabled. This patch is intended to work for both KVM and Xen environments. Signed-off-by: Allen Kay <allen.m.kay@intel.com> Reviewed-by: Mathew Wilcox <willy@linux.intel.com> Reviewed-by: Chris Wright <chris@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* xen: move Xen-testing predicates to common headerJeremy Fitzhardinge2009-11-0412-0/+21
| | | | | | | | Move xen_domain and related tests out of asm-x86 to xen/xen.h so they can be included whenever they are necessary. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PNP: print resources consistently with %pRtBjorn Helgaas2009-11-044-61/+18
| | | | | | | | This uses %pRt and %pRf to print additional resource information (type, size, prefetchability, etc.) consistently. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: print resources consistently with %pRtBjorn Helgaas2009-11-044-43/+24
| | | | | | | | This uses %pRt to print additional resource information (type, size, prefetchability, etc.) consistently. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: acpiphp should be linked after vendor driversMatthew Garrett2009-11-041-4/+8
| | | | | | | | | | | | | As a followup to 71a082efc9fdc12068a3cee6cebb1330b00ebeee, it's conceivable that some vendors may expose PCI hotplug functionality through both vendor mechanisms and ACPI. The native mechanism will generally be a superset of any functionality provided via ACPI, so the acpiphp driver should always be initialised after any others. Change the link order such that acpiphp will not be initialised until any other statically linked drivers have had an opportunity to claim the hardware. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI hotplug: change PCI nomenclatureStefan Assmann2009-11-041-11/+11
| | | | | | | | Change PCI nomenclature according to http://www.pcisig.com/developers/procedures/logos/Trademark_and_Logo_Usage_Guidelines_updated_112206.pdf. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: pci_dfl_cache_line_size is __devinitdataTejun Heo2009-11-041-1/+1
| | | | | | | | | | pci_dfl_cache_line_size is marked as __initdata but referenced by pci_init() which is __devinit. Make it __devinitdata instead of __initdata. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* pccard: configure CLS on attachTejun Heo2009-11-042-28/+35
| | | | | | | | | | | | | | | | | | | | | | | For non hotplug PCI devices, the system firmware usually configures CLS correctly. For pccard devices system firmware can't do it and Linux PCI layer doesn't do it either. Unfortunately this leads to poor performance for certain devices (sata_sil). Unless MWI, which requires separate configuration, is to be used, CLS doesn't affect correctness, so the configuration should be harmless. This patch makes pci_set_cacheline_size() always built and export it and make pccard call it during attach. Please note that some other PCI hotplug drivers (shpchp and pciehp) also configure CLS on hotplug. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Greg KH <greg@kroah.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Axel Birndt <towerlexa@gmx.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* sparc64/PCI: drop PCI_CACHE_LINE_BYTESTejun Heo2009-11-041-5/+1
| | | | | | | | | | sparc64 is now the only user of PCI_CACHE_LINE_BYTES. Drop it and set pci_dfl_cache_line_size from pcibios_init() instead and drop PCI_CACHE_LINE_BYTES handling from generic pci code. Orignally-From: David Miller <davem@davemloft.net> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* PCI: determine CLS more intelligentlyJesse Barnes2009-11-042-8/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Till now, CLS has been determined either by arch code or as L1_CACHE_BYTES. Only x86 and ia64 set CLS explicitly and x86 doesn't always get it right. On most configurations, the chance is that firmware configures the correct value during boot. This patch makes pci_init() determine CLS by looking at what firmware has configured. It scans all devices and if all non-zero values agree, the value is used. If none is configured or there is a disagreement, pci_dfl_cache_line_size is used. arch can set the dfl value (via PCI_CACHE_LINE_BYTES or pci_dfl_cache_line_size) or override the actual one. ia64, x86 and sparc64 updated to set the default cls instead of the actual one. While at it, declare pci_cache_line_size and pci_dfl_cache_line_size in pci.h and drop private declarations from arch code. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: David Miller <davem@davemloft.net> Acked-by: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-11-048-95/+486
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Ironlake suspend/resume support drm/i915: kill warning in intel_find_pll_g4x_dp drm/i915: update watermarks before enabling PLLs drm/i915: add FIFO watermark support for G4x drm/i915: quiet DP i2c init drm/i915: fix panel fitting filter coefficient select for Ironlake drm/i915: fix to setup display reference clock control on Ironlake drm/i915: Install a fence register for fbc on g4x drm/i915: save/restore BLC histogram control reg across suspend/resume drm/i915: Fix FDI M/N setting according with correct color depth drm/i915: disable powersave feature for Ironlake currently drm/i915: Fix render reclock availability detection. drm/i915: Save and restore the GM45 FBC regs on suspend and resume. drm/i915: Set the LVDS_BORDER when using LVDS scaling mode drm/i915: disable FBC for Pineview, fixing a boot hang.
| * drm/i915: Ironlake suspend/resume supportZhenyu Wang2009-10-232-55/+256
| | | | | | | | | | | | | | | | | | | | This adds registers save/restore for Ironlake to make suspend work. Signed-off-by: Guo, Chaohong <chaohong.guo@intel.com> [zhenyuw: some code re-orgnization, and add more save/restore for FDI link and transcoder registers, also fix palette register for Ironlake] Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 00:56:19 +0100