summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [libata] PATA: Update experimental tagsAlan Cox2009-12-031-15/+15
| | | | | Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_cmd64x: implement serialization as per notesAlan Cox2009-12-031-8/+108
| | | | | | | | | | | | | | | | | | | | | | Daniela Engert pointed out that there are some implementation notes for the 643 and 646 that deal with certain serialization rules. In theory we don't need them because they apply when the motherboard decides not to retry PCI requests for long enough and the chip is busy doing a DMA transfer on the other channel. The rule basically is "don't touch the taskfile of the other channel while a DMA is in progress". To implement that we need to - not issue a command on a channel when there is a DMA command queued - not issue a DMA command on a channel when there are PIO commands queued - use the alternative access to the interrupt source so that we do not touch altstatus or status on shared IRQ. Updated to remote extra conditional check Bartlomiej noted and to remove the variables for irq checks as the CMD648 doesn't have the underlying problem. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_sis: Implement MWDMA for the UDMA 133 capable chipsAlan Cox2009-12-031-22/+69
| | | | | | | | Bartlomiej pointed out that while this got fixed in the old driver whoever did it didn't port it across. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_via: Blacklist some combinations of Transcend Flash and viaAlan Cox2009-12-031-0/+27
| | | | | | | | | Reported by Mikulas Patocka. VIA VT82C586B + Transcend TS64GSSD25-M v0826 does not work in UDMA mode Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata/sff: Use ops->bmdma_stop instead of ata_bmdma_stop()Benjamin Herrenschmidt2009-12-031-1/+1
| | | | | | | | | In libata-sff, ata_sff_post_internal_cmd() directly calls ata_bmdma_stop() instead of ap->ops->bmdma_stop(). This can be a problem for controllers that use their own bmdma_stop for which the generic sff one isn't suitable Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: add translation for SCSI WRITE SAME (aka TRIM support)Christoph Hellwig2009-12-031-0/+98
| | | | | | | | | | | | | | Add support for the ATA TRIM command in libata. We translate a WRITE SAME 16 command with the unmap bit set into an ATA TRIM command and export enough information in READ CAPACITY 16 and the block limits EVPD page so that the new SCSI layer discard support will driver this for us. Note that I hardcode the WRITE_SAME_16 opcode for now as the patch to introduce the symbolic is not in 2.6.32 yet but only in the SCSI tree - as soon as it is merged we can fix it up to properly use the symbolic name. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: retry failed FLUSH if device didn't fail itTejun Heo2009-12-031-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | If ATA device failed FLUSH, it means that the device failed to write out some amount of data and the error needs to be reported to upper layers. As retries can't recover the lost data, FLUSH failures need to be reported immediately in general. However, if FLUSH fails due to transmission errors, the FLUSH needs to be retried; otherwise, filesystems may switch to RO mode and/or raid array may drop a drive for a random transmission glitch. This condition can be rather easily reproduced on certain ahci controllers which go through a PHY event after powersave mode switch + ext4 combination. Powersave mode switch is often closely followed by flush from the filesystem failing the FLUSH with ATA bus error which makes the filesystem code believe that data is lost and drop to RO mode. This was reported in the following bugzilla bug. http://bugzilla.kernel.org/show_bug.cgi?id=14543 This patch makes libata EH retry FLUSH if it wasn't failed by the device. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Andrey Vihrov <andrey.vihrov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_fsl: Add asynchronous notification supportashish kalra2009-12-031-8/+10
| | | | | | | Enable device hot-plug support on Port multiplier fan-out ports Signed-off-by: Ashish Kalra <Ashish.Kalra@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_hpt{37x,3x2n}: add debounce delay to cable detection methodsBartlomiej Zolnierkiewicz2009-12-032-0/+6
| | | | | | | | | | | | Alan Cox reported that cable detection sometimes works unreliably for HPT3xxN and that the issue is fixed by adding debounce delay as used by the vendor driver. Sergei Shtylyov also noticed that debounce delay is needed for all HPT37x and HPT3xxN chipsets according to vendor drivers. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_hpt3x2n: fix cable detectionBartlomiej Zolnierkiewicz2009-12-031-1/+1
| | | | | | | | | The detection was reversed between primary and secondary ports. Fix it to match hpt366 and the vendor driver. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ata: Don't require newlines for link_power_management_policyMatthew Garrett2009-12-031-2/+1
| | | | | | | | sysfs attributes shouldn't require newlines. Make it possible to set the link power management policy without a trailing newline. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata-it821x: use PCI_DEVICE_ID_RDC_D1010 defineOtavio Salvador2009-12-031-1/+1
| | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_hpt37x: unify ->pre_reset methodsBartlomiej Zolnierkiewicz2009-12-031-21/+2
| | | | | | | We can use the same ->pre_reset method for all HPT37x chipsets now. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_hpt37x: add proper cable detection methodsBartlomiej Zolnierkiewicz2009-12-031-30/+56
| | | | | Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* ahci: disable SNotification capability for ich8Shaohua Li2009-12-031-2/+18
| | | | | | | | | | | | | | | | | | I obseved there is a sata_async_notification() for every ahci interrupt. But the async notification does nothing (this is hard disk drive and no pmp). This cause cpu wastes some time on sntf register access. It appears ICH AHCI doesn't support SNotification register, but the controller reports it does. After quirking it, the async notification disappears. PS. it appears all ICH don't support SNotification register from ICH manual, don't know if we need quirk all ICH. I don't have machines with all kinds of ICH. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_sil24: MSI support, disabled by defaultVivek Mahajan2009-12-031-0/+9
| | | | | | | | | The following patch adds MSI support. Some platforms may have broken MSI, so those are defaulted to use legacy PCI interrupts. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata: remove experimental tag on PATA driversRobert Hancock2009-12-031-1/+1
| | | | | | | | | | Remove the experimental tag on Parallel ATA drivers. Though some of the individual PATA drivers are still marked as experimental, as a group they can hardly be considered to be, given they've been used in various distros for some time. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* sata_mv: Clean up hard coded array size calculation.Thiago Farina2009-12-031-1/+1
| | | | | | | Use ARRAY_SIZE macro of kernel api instead. Signed-off-by: Thiago Farina <tfransosi@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_via: fix double put on isa bridgeJiri Slaby2009-12-031-6/+4
| | | | | | | | | | | In via_init_one, when via_isa_bridges iterator reaches PCI_DEVICE_ID_VIA_ANON and last but one via_isa_bridges bridge is found but rev doesn't match, pci_dev_put(isa) is called twice. Do pci_dev_put only once. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* pata_cs5536: use 32-bit BM DMA template instead of 16-bit.Krzysztof Halasa2009-12-031-1/+1
| | | | | | | Tested on IXP425 + CS5536. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* libata-acpi: missing _SDD is not an errorTejun Heo2009-12-031-6/+9
| | | | | | | | Missing _SDD is not an error. Don't treat it as one. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* VIDEO: Correct use of request_region/request_mem_regionJulia Lawall2009-12-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | request_region should be used with release_region, not request_mem_region. Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c, the problem is actually the other way around; request_mem_region should be used instead of request_region. The semantic patch that finds/fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r1@ expression start; @@ request_region(start,...) @b1@ expression r1.start; @@ request_mem_region(start,...) @depends on !b1@ expression r1.start; expression E; @@ - release_mem_region + release_region (start,E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* SPI: spi_txx9: Fix bit rate calculationAtsushi Nemoto2009-12-031-7/+6
| | | | | | | | | TXx9 SPI bit rate is calculated by: fBR = (spi-baseclk) / (n + 1) Fix calculation of min_speed_hz, max_speed_hz and n. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
* Merge branch 'for-linus' of ↵Linus Torvalds2009-12-031-1/+1
|\ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: mfd: Correct WM831X_MAX_ISEL_VALUE
| * mfd: Correct WM831X_MAX_ISEL_VALUEMark Brown2009-12-011-1/+1
| | | | | | | | | | | | | | | | | | There was confusion between the array size and the highest ISEL value possible. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | Input: i8042 - add Dell Vostro 1320, 1520 and 1720 to the reset listAnisse Astier2009-12-031-0/+21
| | | | | | | | | | | | | | | | | | These laptops often leave i8042 in a wierd state resulting in non- operational touchpad and keyboard. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds2009-12-031-3/+4
|\ \ | | | | | | | | | | | | * 'for-linus' of git://neil.brown.name/md: md: revert incorrect fix for read error handling in raid1.
| * | md: revert incorrect fix for read error handling in raid1.NeilBrown2009-12-011-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 4706b349f was a forward port of a fix that was needed for SLES10. But in fact it is not needed in mainline because the earlier commit dd00a99e7a fixes the same problem in a better way. Further, this commit introduces a bug in the way it interacts with the automatic read-error-correction. If, after a read error is successfully corrected, the same disk is chosen to re-read - the re-read won't be attempted but an error will be returned instead. After reverting that commit, there is the possibility that a read error on a read-only array (where read errors cannot be corrected as that requires a write) will repeatedly read the same device and continue to get an error. So in the "Array is readonly" case, fail the drive immediately on a read error. Signed-off-by: NeilBrown <neilb@suse.de> Cc: stable@kernel.org
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds2009-12-031-2/+2
|\ \ \ | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [PATCH] rc32434_wdt: fix compilation failure [WATCHDOG] rc32434_wdt.c: use resource_size()
| * | | [PATCH] rc32434_wdt: fix compilation failureFlorian Fainelli2009-12-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the compilation failure of rc32434 due to a bad module parameter description. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
| * | | [WATCHDOG] rc32434_wdt.c: use resource_size()H Hartley Sweeten2009-12-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The size value passed to ioremap_nocache() is not correct. Use resource_size() to get the correct value. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Phil Sutter <n0-1@freewrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
* | | | Merge branch 'for-linus' of ↵Linus Torvalds2009-12-021-0/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: Initialise wm831x structure pointor for ISINK driver
| * | | | regulator: Initialise wm831x structure pointor for ISINK driverMark Brown2009-12-021-0/+2
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | The version that made it into mainline missed the initialisation of the chip handle. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
* | | | Merge branch 'fix' of ↵Linus Torvalds2009-12-021-2/+2
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 * 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6: [ARM] pxamci: call mmc_remove_host() before freeing resources
| * | | | [ARM] pxamci: call mmc_remove_host() before freeing resourcesDaniel Mack2009-12-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc_remove_host() will cause the mmc core to switch off the bus power by eventually calling pxamci_set_ios(). This function uses the regulator or the GPIO which have been freed already. This causes the following Oops on module unload. [ 49.519649] Unable to handle kernel paging request at virtual address 30303a70 [ 49.526878] pgd = c7084000 [ 49.529563] [30303a70] *pgd=00000000 [ 49.533136] Internal error: Oops: 5 [#1] [ 49.537025] last sysfs file: /sys/devices/platform/pxa27x-ohci/usb1/1-1/1-1:1.0/host0/target0:0:0/0:0:0:0/scsi_level [ 49.547471] Modules linked in: pxamci(-) eeti_ts [ 49.552061] CPU: 0 Not tainted (2.6.32-rc8 #322) [ 49.557001] PC is at regulator_is_enabled+0x3c/0xbc [ 49.561846] LR is at regulator_is_enabled+0x30/0xbc [ 49.566691] pc : [<c01a2448>] lr : [<c01a243c>] psr: 60000013 [ 49.566702] sp : c7083e70 ip : 30303a30 fp : 00000000 [ 49.578093] r10: c705e200 r9 : c7082000 r8 : c705e2e0 [ 49.583280] r7 : c7061340 r6 : c7061340 r5 : c7083e70 r4 : 00000000 [ 49.589759] r3 : c04dc434 r2 : c04dc434 r1 : c03eecea r0 : 00000047 [ 49.596241] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 49.603329] Control: 0000397f Table: a7084018 DAC: 00000015 [ 49.609031] Process rmmod (pid: 1101, stack limit = 0xc7082278) [ 49.614908] Stack: (0xc7083e70 to 0xc7084000) [ 49.619238] 3e60: c7082000 c703c4f8 c705ea00 c04f4074 [ 49.627366] 3e80: 00000000 c705e3a0 ffffffff c0247ddc c70361a0 00000000 c705e3a0 ffffffff [ 49.635499] 3ea0: c705e200 bf006400 c78c4f00 c705e200 c705e3a0 ffffffff c705e200 ffffffff [ 49.643633] 3ec0: c04d8ac8 c02476d0 ffffffff c0247c60 c705e200 c0248678 c705e200 c0249064 [ 49.651765] 3ee0: ffffffff bf006204 c04d8ad0 c04d8ad0 c04d8ac8 bf007490 00000880 c00440c4 [ 49.659898] 3f00: 0000b748 c01c5708 bf007490 c01c44c8 c04d8ac8 c04d8afc bf007490 c01c4570 [ 49.668031] 3f20: bf007490 bf00750c c04f4258 c01c37a4 00000000 bf00750c c7083f44 c007b014 [ 49.676162] 3f40: 4000d000 6d617870 08006963 00000001 00000000 c7085000 00000001 00000000 [ 49.684287] 3f60: 4000d000 c7083f8c 00000001 bea01a54 00005401 c7ab1400 c00440c4 00082000 [ 49.692420] 3f80: bf00750c 00000880 c7083f8c 00000000 4000cfa8 00000000 00000880 bea01cc8 [ 49.700552] 3fa0: 00000081 c0043f40 00000000 00000880 bea01cc8 00000880 00000006 00000000 [ 49.708677] 3fc0: 00000000 00000880 bea01cc8 00000081 00000097 0000cca4 0000b748 00000000 [ 49.716802] 3fe0: 4001a4f0 bea01cc0 00018bf4 4001a4fc 20000010 bea01cc8 a063e021 a063e421 [ 49.724958] [<c01a2448>] (regulator_is_enabled+0x3c/0xbc) from [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) [ 49.734836] [<c0247ddc>] (mmc_regulator_set_ocr+0x14/0xd8) from [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) [ 49.745044] [<bf006400>] (pxamci_set_ios+0xd8/0x17c [pxamci]) from [<c02476d0>] (mmc_power_off+0x50/0x58) [ 49.754555] [<c02476d0>] (mmc_power_off+0x50/0x58) from [<c0247c60>] (mmc_detach_bus+0x68/0xc4) [ 49.763207] [<c0247c60>] (mmc_detach_bus+0x68/0xc4) from [<c0248678>] (mmc_stop_host+0xd4/0x1bc) [ 49.771944] [<c0248678>] (mmc_stop_host+0xd4/0x1bc) from [<c0249064>] (mmc_remove_host+0xc/0x20) [ 49.780681] [<c0249064>] (mmc_remove_host+0xc/0x20) from [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) [ 49.790211] [<bf006204>] (pxamci_remove+0xc8/0x174 [pxamci]) from [<c01c5708>] (platform_drv_remove+0x1c/0x24) [ 49.800164] [<c01c5708>] (platform_drv_remove+0x1c/0x24) from [<c01c44c8>] (__device_release_driver+0x7c/0xc4) [ 49.810110] [<c01c44c8>] (__device_release_driver+0x7c/0xc4) from [<c01c4570>] (driver_detach+0x60/0x8c) [ 49.819535] [<c01c4570>] (driver_detach+0x60/0x8c) from [<c01c37a4>] (bus_remove_driver+0x90/0xcc) [ 49.828452] [<c01c37a4>] (bus_remove_driver+0x90/0xcc) from [<c007b014>] (sys_delete_module+0x1d8/0x254) [ 49.837891] [<c007b014>] (sys_delete_module+0x1d8/0x254) from [<c0043f40>] (ret_fast_syscall+0x0/0x28) [ 49.847145] Code: eb06c53a e596c030 e1a0500d e59f106c (e59c0040) [ 49.853566] ---[ end trace b5fa66a00cea142f ]--- Signed-off-by: Daniel Mack <daniel@caiaq.de> Reported-by: Sven Neumann <s.neumann@raumfeld.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: linux-mmc@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@kernel.org Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
* | | | | rtc-x1205: reset clock to sane state after power failureJohannes Weiner2009-12-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When detecting power failure, the probe function would reset the clock time to defined state. However, the clock's _date_ might still be bogus and a subsequent probe fails when sanity-checking these values. Change the power-failure fixup code to do a full setting of rtc_time, including a valid date. Signed-off-by: Johannes Weiner <jw@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | rtc-x1205: fix rtc_time to y2k register value conversionJohannes Weiner2009-12-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The possible CCR_Y2K register values are 19 or 20 and struct rtc_time's tm_year is in years since 1900. The function translating rtc_time to register values assumes tm_year to be years since first christmas, though, and we end up storing 0 or 1 in the CCR_Y2K register, which the hardware does not refuse to do. A subsequent probing of the clock fails due to the invalid value range in the register, though. [ And if it didn't, reading the clock would yield a bogus year because the function translating registers to tm_year is assuming a register value of 19 or 20. ] This fixes the conversion from years since 1900 in tm_year to the corresponding CCR_Y2K value of 19 or 20. Signed-off-by: Johannes Weiner <jw@emlix.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | aoe: prevent cache aliasesPeter Horton2009-12-021-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prevent the AoE block driver from creating cache aliases of page cache pages on machines with virtually indexed caches. Building kernels on an AT91SAM9G20 board without this patch fails with segmentation faults after a couple of passes. Signed-off-by: Peter Horton <zero@colonel-panic.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | gpio: Langwell GPIO driver bugfixesAlek Du2009-12-021-10/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove wrong and unnecessary unmask operation - Remove extra GEDR reading This fixes the loss of interrupts which occurs when two or more pins are triggered in close succession. Signed-off-by: Alek Du <alek.du@intel.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | davinci: fb: fix frame buffer driver issuesSudhakar Rajashekhara2009-12-021-4/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following issues have been addressed on DA8XX/OMAP-L1XX: a. Screen misalignment during booting when frame buffer console is enabled. b. Driver was configured always in PSEUDOCOLOR mode. This patch dynamically configures the driver either in PSEUDOCOLOUR or TRUECOLOR mode depending on bpp. c. The RED and BLUE offsets were interchanged resulting in wrong bootup logo colour. This patch has been tested on DA830/OMAP-L137 and DA850/OMAP-L138 EVMs. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Steve Chen <schen@mvista.com> Cc: Pavel Kiryukhin <pkiryukhin@ru.mvista.com> Cc: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | drivers/rtc/rtc-pcf50633.c: fix use after free in pcf50633_rtc_probe()Dan Carpenter2009-12-021-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "rtc" is freed and then dereferenced on the next line. This patch fixes that. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: Paul Gortmaker <p_gortmaker@yahoo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | drivers/media/dvb/dvb-core/dvb_frontend.c: needs semaphore.hAndrew Morton2009-12-021-0/+1
| |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes: v4l/dvb_frontend.c: In function 'dvb_frontend_stop': v4l/dvb_frontend.c:707: error: implicit declaration of function 'init_MUTEX' Addresses http://bugzilla.kernel.org/show_bug.cgi?id=14609 Reported-by: <tstrelar@gmail.com> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds2009-12-0112-28/+21
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: Staging: update TODO files Staging: hv: Fix some missing author names Staging: hv: Fix vmbus event handler bug Staging: hv: Fix argument order in incorrect memset invocations in hyperv driver.
| * | | | Staging: update TODO filesBartlomiej Zolnierkiewicz2009-12-014-10/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove my mail address. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | Staging: hv: Fix some missing author namesHaiyang Zhang2009-12-015-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix some missing author names. They were accidentally removed by someone within Microsoft before the files were sent for inclusion in the kernel. Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | Staging: hv: Fix vmbus event handler bugHaiyang Zhang2009-12-012-13/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The flag ENABLE_POLLING is always enabled in original Makefile, but accidently removed during porting to mainline kernel. The patch fixes this bug which can cause stalled network communication. Credit needs to go to Eric Sesterhenn <eric.sesterhenn@lsexperts.de> For pointing out a typo in the original code as well. Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | Staging: hv: Fix argument order in incorrect memset invocations in hyperv ↵Dave Jones2009-12-011-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | driver. Nearly every invocation of memset in drivers/staging/hv/StorVsc.c has its arguments the wrong way around. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds2009-12-0114-78/+118
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driver USB: work around for EHCI with quirky periodic schedules USB: musb: Fix CPPI IRQs not being signaled USB: musb: respect usb_request->zero in control requests USB: musb: fix ISOC Tx programming for CPPI DMAs USB: musb: Remove unwanted message in boot log usb: amd5536udc: fixed shared interrupt bug and warning oops USB: ftdi_sio: Keep going when write errors are encountered. USB: musb_gadget: fix STALL handling USB: EHCI: don't send Clear-TT-Buffer following a STALL
| * | | | | USB: Add support for Mobilcom Debitel USB UMTS Surf-Stick to option driverGernot Hillier2009-12-011-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the vendor and device id for the Mobilcom Debitel UMTS surf stick (a.k.a. 4G Systems XSStick W14, MobiData MBD-200HU, ...). To see these ids, you need to switch the stick to modem operation first with the help of usb_modeswitch. This makes it switch from 1c9e:f000 to 1c9e:9603 and thus be recognized by the option driver. Signed-off-by: Gernot Hillier <gernot@hillier.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
| * | | | | USB: work around for EHCI with quirky periodic schedulesOliver Neukum2009-12-014-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a quirky chipset needs periodic schedules to run for a minimum time before they can be disabled again. This enforces the requirement with a time stamp and a calculated delay Signed-off-by: Oliver Neukum <oliver@neukum.org> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 01:50:00 +0100