summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* ghes_edac: Fix RAS tracingMauro Carvalho Chehab2013-02-251-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the current version of CPER, there's no way to associate an error with the memory error. So, the error location in EDAC layers is unused. As CPER has its own idea about memory architectural layers, just output whatever is there inside the driver's detail at the RAS tracepoint. The EDAC location keeps untouched, in the case that, in some future, we could actually map the error into the dimm labels. Now, the error message: [ 72.396625] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 72.396627] {1}[Hardware Error]: APEI generic hardware error status [ 72.396628] {1}[Hardware Error]: severity: 2, corrected [ 72.396630] {1}[Hardware Error]: section: 0, severity: 2, corrected [ 72.396632] {1}[Hardware Error]: flags: 0x01 [ 72.396634] {1}[Hardware Error]: primary [ 72.396635] {1}[Hardware Error]: section_type: memory error [ 72.396637] {1}[Hardware Error]: error_status: 0x0000000000000400 [ 72.396638] {1}[Hardware Error]: node: 3 [ 72.396639] {1}[Hardware Error]: card: 0 [ 72.396640] {1}[Hardware Error]: module: 0 [ 72.396641] {1}[Hardware Error]: device: 0 [ 72.396643] {1}[Hardware Error]: error_type: 18, unknown [ 72.396666] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:0 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Is properly represented on the trace event: kworker/0:2-584 [000] .... 72.396657: mc_event: 1 Corrected error: reserved error (18) on unknown label (mc:0 location:-1:-1:-1 address:0x00000000 grain:1 syndrome:0x00000000 APEI location: node:3 card:0 module:0 status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 sockets E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* ghes_edac: Make it compliant with UEFI spec 2.3.1Mauro Carvalho Chehab2013-02-251-15/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The UEFI spec defines the memory error types ans the bits that validate each field on the memory error record, at Appendix N om items N.2.5 (Memory Error Section) and N.2.11 (Error Status). Make the error description compliant with it, only showing the valid fields. The EDAC error log is now properly reporting the error: [ 281.556854] mce: [Hardware Error]: Machine check events logged [ 281.557042] {2}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 0 [ 281.557044] {2}[Hardware Error]: APEI generic hardware error status [ 281.557046] {2}[Hardware Error]: severity: 2, corrected [ 281.557048] {2}[Hardware Error]: section: 0, severity: 2, corrected [ 281.557050] {2}[Hardware Error]: flags: 0x01 [ 281.557052] {2}[Hardware Error]: primary [ 281.557053] {2}[Hardware Error]: section_type: memory error [ 281.557055] {2}[Hardware Error]: error_status: 0x0000000000000400 [ 281.557056] {2}[Hardware Error]: node: 3 [ 281.557057] {2}[Hardware Error]: card: 0 [ 281.557058] {2}[Hardware Error]: module: 1 [ 281.557059] {2}[Hardware Error]: device: 0 [ 281.557061] {2}[Hardware Error]: error_type: 18, unknown [ 281.557067] EDAC DEBUG: ghes_edac_report_mem_error: error validation_bits: 0x000040b9 [ 281.557084] EDAC MC0: 1 CE reserved error (18) on unknown label (node:3 card:0 module:1 page:0x0 offset:0x0 grain:0 syndrome:0x0 - status(0x0000000000000400): Storage error in DRAM memory) Tested on a 4 CPUs E5-4650 Sandy Bridge machine. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* ghes_edac: Improve driver's printk messagesMauro Carvalho Chehab2013-02-251-10/+26
| | | | | | | | | | | | | | | | | | Provide a better infrastructure for printk's inside the driver: - use edac_dbg() for debug messages; - standardize the usage of pr_info(); - provide warning about the risk of relying on this driver. While here, changes the size of a fake memory to 1 page. This is as good or as bad as 1000 pages, but it is easier for userspace to detect, as I don't expect that any machine implementing GHES would provide just 1 page available ;) Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Conflicts: drivers/edac/ghes_edac.c
* ghes_edac: Don't credit the same memory dimm twiceMauro Carvalho Chehab2013-02-251-4/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On my tests on a 4xE5-4650 CPU's system, the GHES EDAC driver is called twice. As the SMBIOS DMI enumeration call will seek for the entire DIMM sockets in the system, on this machine, equipped with 128 GB of RAM, the memory is displayed twice: +-----------------------+ | mc0 | mc1 | ----------+-----------------------+ memory45: | 8192 MB | 8192 MB | memory44: | 0 MB | 0 MB | ----------+-----------------------+ memory43: | 0 MB | 0 MB | memory42: | 8192 MB | 8192 MB | ----------+-----------------------+ memory41: | 0 MB | 0 MB | memory40: | 0 MB | 0 MB | ----------+-----------------------+ memory39: | 8192 MB | 8192 MB | memory38: | 0 MB | 0 MB | ----------+-----------------------+ memory37: | 0 MB | 0 MB | memory36: | 8192 MB | 8192 MB | ----------+-----------------------+ memory35: | 0 MB | 0 MB | memory34: | 0 MB | 0 MB | ----------+-----------------------+ memory33: | 8192 MB | 8192 MB | memory32: | 0 MB | 0 MB | ----------+-----------------------+ memory31: | 0 MB | 0 MB | memory30: | 8192 MB | 8192 MB | ----------+-----------------------+ memory29: | 0 MB | 0 MB | memory28: | 0 MB | 0 MB | ----------+-----------------------+ memory27: | 8192 MB | 8192 MB | memory26: | 0 MB | 0 MB | ----------+-----------------------+ memory25: | 0 MB | 0 MB | memory24: | 8192 MB | 8192 MB | ----------+-----------------------+ memory23: | 0 MB | 0 MB | memory22: | 0 MB | 0 MB | ----------+-----------------------+ memory21: | 8192 MB | 8192 MB | memory20: | 0 MB | 0 MB | ----------+-----------------------+ memory19: | 0 MB | 0 MB | memory18: | 8192 MB | 8192 MB | ----------+-----------------------+ memory17: | 0 MB | 0 MB | memory16: | 0 MB | 0 MB | ----------+-----------------------+ memory15: | 8192 MB | 8192 MB | memory14: | 0 MB | 0 MB | ----------+-----------------------+ memory13: | 0 MB | 0 MB | memory12: | 8192 MB | 8192 MB | ----------+-----------------------+ memory11: | 0 MB | 0 MB | memory10: | 0 MB | 0 MB | ----------+-----------------------+ memory9: | 8192 MB | 8192 MB | memory8: | 0 MB | 0 MB | ----------+-----------------------+ memory7: | 0 MB | 0 MB | memory6: | 8192 MB | 8192 MB | ----------+-----------------------+ memory5: | 0 MB | 0 MB | memory4: | 0 MB | 0 MB | ----------+-----------------------+ memory3: | 8192 MB | 8192 MB | memory2: | 0 MB | 0 MB | ----------+-----------------------+ memory1: | 0 MB | 0 MB | memory0: | 8192 MB | 8192 MB | ----------+-----------------------+ Total sum of 256 GB. As there's no reliable way to credit DIMMS to the right memory controller, just put everything on memory controller 0 (with should always exist). Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* ghes_edac: do a better job of filling EDAC DIMM infoMauro Carvalho Chehab2013-02-251-12/+180
| | | | | | | Instead of just faking a random value for the DIMM data, get the information that it is available via DMI table. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* ghes_edac: add support for reporting errors via EDACMauro Carvalho Chehab2013-02-251-2/+54
| | | | | | | Now that the EDAC core is capable of just forward the errors via the userspace API, add a report mechanism for the GHES errors. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* ghes_edac: Register at EDAC core the BIOS reportMauro Carvalho Chehab2013-02-253-0/+138
| | | | | | | | | | | | | | | Register GHES at EDAC MC core, in order to avoid other drivers to also handle errors and mangle with error data. The edac core will warrant that just one driver will be used, so the first one to register (BIOS first) will be the one that will be reporting the hardware errors. For now, the EDAC driver does nothing but to register at the EDAC core, preventing the hardware-driven mechanism to interfere with GHES. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* ghes: add the needed hooks for EDAC error reportMauro Carvalho Chehab2013-02-251-5/+19
| | | | | | | | | | | | | | In order to allow reporting errors via EDAC, add hooks for: 1) register an EDAC driver; 2) unregister an EDAC driver; 3) report errors via EDAC. As the EDAC driver will need to access the ghes structure, adds it as one of the parameters for ghes_do_proc. Acked-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* ghes: move structures/enum to a header fileMauro Carvalho Chehab2013-02-211-45/+2
| | | | | | | | As a ghes_edac driver will need to access ghes structures, in order to properly handle the errors, move those structures to a separate header file. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: add support for raw error reportsMauro Carvalho Chehab2013-02-212-22/+47
| | | | | | | That allows APEI GHES driver to report errors directly, using the EDAC error report API. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: reduce stack pressure by using a pre-allocated bufferMauro Carvalho Chehab2013-02-211-33/+48
| | | | | | | | The number of variables at the stack is too big. Reduces the stack usage by using a pre-allocated error buffer. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: lock module owner to avoid error report conflictsMauro Carvalho Chehab2013-02-211-4/+21
| | | | | | | | | | | | | | | | | | | | | | | APEI GHES and i7core_edac/sb_edac currently can be loaded at the same time, but those are Highlander modules: "There can be only one". There are two reasons for that: 1) Each driver assumes that it is the only one registering at the EDAC core, as it is driver's responsibility to number the memory controllers, and all of them start from 0; 2) If BIOS is handling the memory errors, the OS can't also be doing it, as one will mangle with the other. So, we need to add an module owner's lock at the EDAC core, in order to avoid having two different modules handling memory errors at the same time. The best way for doing this lock seems to use the driver's name, as this is unique, and won't require changes on every driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: add a new memory layer typeMauro Carvalho Chehab2013-02-211-0/+1
| | | | | | | | | There are some cases where the memory controller layout is completely hidden. This is the case of firmware-driven error code, like the one provided by GHES. Add a new layer to be used on such memory error report mechanisms. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: initialize the core earlierMauro Carvalho Chehab2013-02-211-1/+1
| | | | | | | | | | | | | | | | | In order for it to work with it builtin, the EDAC core should be initialized earlier, otherwise the ghes_edac driver initializes before edac_mc_sysfs_init() being called: ... [ 4.998373] EDAC MC0: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes ... [ 4.998373] EDAC MC1: Giving out device to 'ghes_edac.c' 'ghes_edac': DEV ghes [ 6.519495] EDAC MC: Ver: 3.0.0 [ 6.523749] EDAC DEBUG: edac_mc_sysfs_init: device mc created The net result is that no EDAC sysfs nodes will appear. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: better report error conditions in debug modeMauro Carvalho Chehab2013-02-211-1/+6
| | | | | | | It is hard to find what's wrong without a proper error report. Improve it, in debug mode. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* i5100_edac: Remove two checkpatch warningsMauro Carvalho Chehab2013-02-211-4/+2
| | | | | | | | | | | | | | | | | | The last changeset introduced a few checkpatch warnings: WARNING: debugfs_remove_recursive(NULL) is safe this check is probably not required 261: FILE: drivers/edac/i5100_edac.c:1207: + if (priv->debugfs) + debugfs_remove_recursive(priv->debugfs); WARNING: debugfs_remove(NULL) is safe this check is probably not required 290: FILE: drivers/edac/i5100_edac.c:1250: + if (i5100_debugfs) + debugfs_remove(i5100_debugfs); Get rid of them. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* i5100_edac: connect fault injection to debugfs nodeNiklas Söderlund2013-02-211-1/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a debugfs direcotry i5100_edac/mcX for each memory controller and add nodes to control how fault injection is preformed. After configuring an injection using inject_channel, inject_deviceptr1, inject_deviceptr2, inject_eccmask1, inject_eccmask2 and inject_hlinesel trigger the injection by writing anything to inject_enable. Example of a CE injection: echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel echo 61440 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1 echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable Example of UE injection: echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_channel echo 2 > /sys/kernel/debug/i5100_edac/mc0/inject_hlinesel echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask1 echo 65535 > /sys/kernel/debug/i5100_edac/mc0/inject_eccmask2 echo 17 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr1 echo 0 > /sys/kernel/debug/i5100_edac/mc0/inject_deviceptr2 echo 1 > /sys/kernel/debug/i5100_edac/mc0/inject_enable Sometimes it is needed to enable the injection more then once (echo to the inject_enable node) for the injection to happen, I am not sure why. Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* i5100_edac: add fault injection codeNiklas Söderlund2013-02-211-0/+87
| | | | | | | | | | | | | | | | | | | Add fault injection based on information datasheet for i5100, see 1. In addition to the i5100 datasheet some missing information on injection functions where found through experimentation and the i7300 datasheet, see 2. [1] Intel 5100 Memory Controller Hub Chipset Doc.Nr: 318378 http://www.intel.com/content/dam/doc/datasheet/5100- memory-controller-hub-chipset-datasheet.pdf [2] Intel 7300 Chipset MemoryController Hub (MCH) Doc.Nr: 318082 http://www.intel.com/assets/pdf/datasheet/318082.pdf Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* i5100_edac: probe for device 19 function 0Niklas Söderlund2013-02-211-1/+27
| | | | | | | | Probe and store the device handle for the device 19 function 0 during driver initialization. The device is used during fault injection. Signed-off-by: Niklas Söderlund <niklas.soderlund@ericsson.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* edac: only create sdram_scrub_rate where supportedMauro Carvalho Chehab2013-02-211-10/+19
| | | | | | | | | | | Currently, sdram_scrub_rate sysfs node is created even if the device doesn't support get/set the scub rate. Change the logic to only create this device node when the operation is supported. Reported-by: Felipe Balbi <balbi@ti.com> Acked-by: Borislav Petkov <bp@suse.de> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* i3200_edac: Fix the logic that detects filled memoriesMauro Carvalho Chehab2013-02-211-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After running a series of tests on an HP DL320, filled with different memory sizes, it was noticed that, when filled with just one DIMM on such hardware, the driver wrongly detects twice the memory, and thinks that both channels 0 and 1 are filled. It seems to be partially caused by the BIOS and partially by the driver. The i3200_edac current logic would be working fine if the BIOS were disabling the unused second channel when just one DIMM is connected, in order to do power-saving, as recommended on this chipset's datasheet. However, the BIOS on this particular machine doesn't do it: [ 16.741421] EDAC DEBUG: how_many_channels: In dual channel mode [ 16.741424] EDAC DEBUG: how_many_channels: 2 DIMMS per channel enabled So, the driver were assuming that 2 channels are enabled (well, they are, but the second is unused). Combined with that, I found two issues at the logic that creates the EDAC data, that were failing when the two channels are not equally filled (AFAICT, that happens only when just 1 DIMM is plugged). The first one is that a 0 at DRB means that nothing is filled. The driver's logic, however, do some calculation with that. The second one is that the logic that fills the DIMM data currently assumes that both channels are equally filled. I tested the system already with the current configuration and my patch and it is now working fine. So, for a 2R single DIMM 2Gb memory at dimm slot 01 (channel 0), it is now displaying: [ 16.741406] EDAC DEBUG: i3200_get_drbs: drb[0][0] = 16, drb[1][0] = 0 [ 16.741410] EDAC DEBUG: i3200_get_drbs: drb[0][1] = 32, drb[1][1] = 0 [ 16.741413] EDAC DEBUG: i3200_get_drbs: drb[0][2] = 32, drb[1][2] = 0 [ 16.741416] EDAC DEBUG: i3200_get_drbs: drb[0][3] = 32, drb[1][3] = 0 ... [ 16.741896] EDAC DEBUG: i3200_probe1: csrow 0, channel 0, size = 1024 Mb [ 16.741899] EDAC DEBUG: i3200_probe1: csrow 1, channel 0, size = 1024 Mb and the corresponding sysfs nodes are now properly filled. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* i3200_edac: Add more debug to the driverMauro Carvalho Chehab2013-02-211-2/+14
| | | | | | | | | | | Currently, it is not possible to know, when debug is enabled, if the driver is using 2 DIMMS per channel mode or not. It is not possible to know the values of the drbs registers, used to identify the memory rank sizes. Add debug for both, as it helps to track issues on the driver. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
* Merge tag 'v3.8-rc7' into nextMauro Carvalho Chehab2013-02-205298-185246/+301692
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 3.8-rc7 * tag 'v3.8-rc7': (12052 commits) Linux 3.8-rc7 net: sctp: sctp_endpoint_free: zero out secret key data net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree atm/iphase: rename fregt_t -> ffreg_t ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned ARM: DMA mapping: fix bad atomic test ARM: realview: ensure that we have sufficient IRQs available ARM: GIC: fix GIC cpumask initialization net: usb: fix regression from FLAG_NOARP code l2tp: dont play with skb->truesize net: sctp: sctp_auth_key_put: use kzfree instead of kfree netback: correct netbk_tx_err to handle wrap around. xen/netback: free already allocated memory on failure in xen_netbk_get_requests xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop. xen/netback: shutdown the ring if it contains garbage. drm/ttm: fix fence locking in ttm_buffer_object_transfer, 2nd try virtio_console: Don't access uninitialized data. net: qmi_wwan: add more Huawei devices, including E320 net: cdc_ncm: add another Huawei vendor specific device ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit() ...
| * Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2013-02-0838-251/+459
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a bunch of folks. From Emmanuel Grumbach. 2) Work limiting code in brcmsmac wifi driver can clear tx status without processing the event. From Arend van Spriel. 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger. 4) l2tp tunnel delete can race with close, fix from Tom Parkin. 5) pktgen_add_device() failures are not checked at all, fix from Cong Wang. 6) Fix unintentional removal of carrier off from tun_detach(), otherwise we confuse userspace, from Michael S. Tsirkin. 7) Don't leak socket reference counts and ubufs in vhost-net driver, from Jason Wang. 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil Horman. 9) Protect against USB networking devices which spam the host with 0 length frames, from Bjørn Mork. 10) Prevent neighbour overflows in ipv6 for locally destined routes, from Marcelo Ricardo. This is the best short-term fix for this, a longer term fix has been implemented in net-next. 11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops. This mistake is largely because the ipv6 functions don't even have some kind of prefix in their names to suggest they are ipv6 specific. From Tom Parkin. 12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from Yuchung Cheng. 13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from Francois Romieu and your's truly. 14) Fix infinite loops and divides by zero in TCP congestion window handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen. 15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix from Phil Sutter. 16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala. 17) Protect XEN netback driver against hostile frontend putting garbage into the rings, don't leak pages in TX GOP checking, and add proper resource releasing in error path of xen_netbk_get_requests(). From Ian Campbell. 18) SCTP authentication keys should be cleared out and released with kzfree(), from Daniel Borkmann. 19) L2TP is a bit too clever trying to maintain skb->truesize, and ends up corrupting socket memory accounting to the point where packet sending is halted indefinitely. Just remove the adjustments entirely, they aren't really needed. From Eric Dumazet. 20) ATM Iphase driver uses a data type with the same name as the S390 headers, rename to fix the build. From Heiko Carstens. 21) Fix a typo in copying the inner network header offset from one SKB to another, from Pravin B Shelar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) net: sctp: sctp_endpoint_free: zero out secret key data net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree atm/iphase: rename fregt_t -> ffreg_t net: usb: fix regression from FLAG_NOARP code l2tp: dont play with skb->truesize net: sctp: sctp_auth_key_put: use kzfree instead of kfree netback: correct netbk_tx_err to handle wrap around. xen/netback: free already allocated memory on failure in xen_netbk_get_requests xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop. xen/netback: shutdown the ring if it contains garbage. net: qmi_wwan: add more Huawei devices, including E320 net: cdc_ncm: add another Huawei vendor specific device ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit() tcp: fix for zero packets_in_flight was too broad brcmsmac: rework of mac80211 .flush() callback operation ssb: unregister gpios before unloading ssb bcma: unregister gpios before unloading bcma rtlwifi: Fix scheduling while atomic bug net: usbnet: fix tx_dropped statistics tcp: ipv6: Update MIB counters for drops ...
| | * atm/iphase: rename fregt_t -> ffreg_tHeiko Carstens2013-02-081-73/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the iphase atm device driver, which causes the compile error below. Unfortunately the s390 typedef can't be renamed, since it's a user visible api, nor can I change the include order in s390 code to avoid the conflict. So simply rename the iphase typedef to a new name. Fixes this compile error: In file included from drivers/atm/iphase.c:66:0: drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t' In file included from next/arch/s390/include/asm/ptrace.h:9:0, from next/arch/s390/include/asm/lowcore.h:12, from next/arch/s390/include/asm/thread_info.h:30, from include/linux/thread_info.h:54, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/atm/iphase.c:43: next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * Merge branch 'netback'David S. Miller2013-02-083-53/+88
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ian Campbell says: ==================== The Xen netback implementation contains a couple of flaws which can allow a guest to cause a DoS in the backend domain, potentially affecting other domains in the system. CVE-2013-0216 is a failure to sanity check the ring producer/consumer pointers which can allow a guest to cause netback to loop for an extended period preventing other work from occurring. CVE-2013-0217 is a memory leak on an error path which is guest triggerable. The following series contains the fixes for these issues, as previously included in Xen Security Advisory 39: http://lists.xen.org/archives/html/xen-announce/2013-02/msg00001.html Changes in v2: - Typo and block comment format fixes - Added stable Cc ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | | * netback: correct netbk_tx_err to handle wrap around.Ian Campbell2013-02-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | | * xen/netback: free already allocated memory on failure in xen_netbk_get_requestsIan Campbell2013-02-081-1/+12
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | | * xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop.Matthew Daley2013-02-081-25/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Matthew Daley <mattjd@gmail.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Acked-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | | * xen/netback: shutdown the ring if it contains garbage.Ian Campbell2013-02-083-26/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A buggy or malicious frontend should not be able to confuse netback. If we spot anything which is not as it should be then shutdown the device and don't try to continue with the ring in a potentially hostile state. Well behaved and non-hostile frontends will not be penalised. As well as making the existing checks for such errors fatal also add a new check that ensures that there isn't an insane number of requests on the ring (i.e. more than would fit in the ring). If the ring contains garbage then previously is was possible to loop over this insane number, getting an error each time and therefore not generating any more pending requests and therefore not exiting the loop in xen_netbk_tx_build_gops for an externded period. Also turn various netdev_dbg calls which no precipitate a fatal error into netdev_err, they are rate limited because the device is shutdown afterwards. This fixes at least one known DoS/softlockup of the backend domain. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Jan Beulich <JBeulich@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | net: qmi_wwan: add more Huawei devices, including E320Bjørn Mork2013-02-061-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding new class/subclass/protocol combinations based on the GPLed out-of-tree Huawei driver. One of these has already appeared on a device labelled as "E320". Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | net: cdc_ncm: add another Huawei vendor specific deviceBjørn Mork2013-02-061-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding a new vendor specific class/subclass/protocol combination for CDC NCM devices based on information from a GPLed out-of-tree driver from Huawei. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | Merge branch 'master' of ↵John W. Linville2013-02-0611-32/+74
| | |\ \ | | | |/ | | |/| | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| | | * brcmsmac: rework of mac80211 .flush() callback operationArend van Spriel2013-02-044-29/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a long standing issue of the driver with the mac80211 .flush() callback. Since implementing the .flush() callback a number of issues have been fixed, but a WARN_ON_ONCE() was still triggered because the timeout on the flush could still occur. This patch changes the awkward design using msleep() into one using a waitqueue. The waiting flush() context will kick the transmit dma when it is idle and the timeout used waiting for the event is set to 500 ms. Worst case there can be 64 frames outstanding for transmit in the driver. At a rate of 1Mbps that would take 1.5 seconds assuming MTU is 1500 bytes and ignoring retries. The WARN_ON_ONCE() is also removed as this was put in to indicate the flush timeout as a reason for the driver to stall. That was not happening since fixing endless AMPDU retries with following upstream commit: commit 85091fc0a75653e239dc8379658515e577544927 Author: Arend van Spriel <arend@broadcom.com> Date: Thu Feb 23 18:38:22 2012 +0100 brcm80211: smac: fix endless retry of A-MPDU transmissions bugzilla: 42840 <https://bugzilla.kernel.org/show_bug.cgi?id=42840> bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=799168> bugzilla@redhat: <https://bugzilla.redhat.com/show_bug.cgi?id=787649> Cc: Jonathan Nieder <jrnieder@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Camaleón <noelamac@gmail.com> Cc: Milan Bouchet-Valat <nalimilan@club-internet.fr> Cc: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * ssb: unregister gpios before unloading ssbHauke Mehrtens2013-02-043-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch unregisters the gpio chip before ssb gets unloaded. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * bcma: unregister gpios before unloading bcmaHauke Mehrtens2013-02-043-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch unregisters the gpio chip before bcma gets unloaded. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * rtlwifi: Fix scheduling while atomic bugLarry Finger2013-02-041-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Kernel commits 41affd5 and 6539306 changed the locking in rtl_lps_leave() from a spinlock to a mutex by doing the calls indirectly from a work queue to reduce the time that interrupts were disabled. This change was fine for most systems; however a scheduling while atomic bug was reported in https://bugzilla.redhat.com/show_bug.cgi?id=903881. The backtrace indicates that routine rtl_is_special(), which calls rtl_lps_leave() in three places was entered in atomic context. These direct calls are replaced by putting a request on the appropriate work queue. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-and-tested-by: Nathaniel Doherty <ntdoherty@gmail.com> Cc: Nathaniel Doherty <ntdoherty@gmail.com> Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | * | net: usbnet: fix tx_dropped statisticsBjørn Mork2013-02-041-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is normal for minidrivers accumulating frames to return NULL from their tx_fixup function. We do not want to count this as a drop, or log any debug messages. A different exit path is therefore chosen for such drivers, skipping the debug message and the tx_dropped increment. The test for accumulating drivers was however completely bogus, making the exit path selection depend on whether the user had enabled tx_err logging or not. This would arbitrarily mess up accounting for both accumulating and non-accumulating minidrivers, and would result in unwanted debug messages for the accumulating drivers. Fix by testing for FLAG_MULTI_PACKET instead, which probably was the intention from the beginning. This usage match the documented behaviour of this flag: Indicates to usbnet, that USB driver accumulates multiple IP packets. Affects statistic (counters) and short packet handling. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | Merge branch 'fixes-for-3.8' of git://gitorious.org/linux-can/linux-canDavid S. Miller2013-02-031-1/+5
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marc Kleine-Budde says: ==================== here's a patch for net for the v3.8 release cycle. Alexander Stein noticed that the c_can hardware has a fixed bit in the IFx_MASK2 register. His patch fixes writing of this register by always setting this bit. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | | * | can: c_can: Set reserved bit in IFx_MASK2 to 1 on writeAlexander Stein2013-02-011-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to C_CAN documentation, the reserved bit in IFx_MASK2 register is fixed 1. Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * | | via-rhine: Fix bugs in NAPI support.David S. Miller2013-02-031-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) rhine_tx() should use dev_kfree_skb() not dev_kfree_skb_irq() 2) rhine_slow_event_task's NAPI triggering logic is racey, it should just hit the interrupt mask register. This is the same as commit 7dbb491878a2c51d372a8890fa45a8ff80358af1 ("r8169: avoid NAPI scheduling delay.") made to fix the same problem in the r8169 driver. From Francois Romieu. Reported-by: Jamie Gloudon <jamie.gloudon@gmail.com> Tested-by: Jamie Gloudon <jamie.gloudon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | Merge branch 'master' of ↵John W. Linville2013-02-015-40/+24
| | |\ \ \ | | | |/ / | | |/| / | | | |/ git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
| | | * mwifiex: fix incomplete scan in case of IE parsing errorBing Zhao2013-01-301-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A scan request is split into multiple scan commands queued in scan_pending_q. Each scan command will be sent to firmware and its response is handlded one after another. If any error is detected while parsing IE in command response buffer the remaining data will be ignored and error is returned. We should check if there is any more scan commands pending in the queue before returning error. This ensures that we will call cfg80211_scan_done if this is the last scan command, or send next scan command in scan_pending_q to firmware. Cc: "3.6+" <stable@vger.kernel.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * rtlwifi: Fix the usage of the wrong variable in usb.cLarry Finger2013-01-281-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In routine _rtl_rx_pre_process(), skb_dequeue() is called to get an skb; however, the wrong variable name is used in subsequent calls. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * bcma: fix NAND flash validationRafał Miłecki2013-01-281-1/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * brcmsmac: fix tx status processingArend van Spriel2013-01-281-16/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This issue was reported on the wireless list (see [1]) in which brcmsmac ran into a fatal error: [ 588.284074] brcmsmac bcma0:0: frameid != txh->TxFrameID [ 588.284098] brcmsmac bcma0:0: MI_TFS: fatal [ 588.284103] brcmsmac bcma0:0: wl0: fatal error, reinitializing [ 588.286208] ieee80211 phy0: Hardware restart was requested The tx status feedback is processed in a loop limiting the number of frames processed in one run. The code terminate processing when the limit is reached regardless the txstatus value read from the device register. When that status is is flagged as being valid it must be processed as the hardware will clear it after is has been read. Bisecting was done by Seth Forshee and showed following commit as the culprit: commit 57fe504817ccec9b6ac23e973d2925343bf1e3b6 Author: Piotr Haber <phaber@broadcom.com> Date: Wed Nov 28 21:44:07 2012 +0100 brcmsmac: fix bounds checking in tx/rx [1] http://www.spinics.net/lists/linux-wireless/msg101293.html Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Tested-by: Seth Forshee <seth.forshee@canonical.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| | | * Merge branch 'for-john' of ↵John W. Linville2013-01-281-17/+7
| | | |\ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
| | | | * Revert "iwlwifi: fix the reclaimed packet tracking upon flush queue"Emmanuel Grumbach2013-01-241-17/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit f590dcec944552f9a4a61155810f3abd17d6465d which has been reported to cause issues. See https://lkml.org/lkml/2013/1/20/4 for further details. Cc: stable@vger.kernel.org [3.7] Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
| | * | | NET: qmi_wwan: add Telit LE920 supportDaniele Palmas2013-01-311-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add VID, PID and fixed interface for Telit LE920 Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | net: usbnet: prevent buggy devices from killing usBjørn Mork2013-01-301-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A device sending 0 length frames as fast as it can has been observed killing the host system due to the resulting memory pressure. Temporarily disable RX skb allocation and URB submission when the current error ratio is high, preventing us from trying to allocate an infinite number of skbs. Reenable as soon as we are finished processing the done queue, allowing the device to continue working after short error bursts. Signed-off-by: Bjørn Mork <bjorn@mork.no> Acked-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-15 06:55:45 +0100