summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: phy: bcm7xxx: define soft_reset for 40nm EPHYDoug Berger2019-10-181-0/+1
| | | | | | | | | | | | | | The internal 40nm EPHYs use a "Workaround for putting the PHY in IDDQ mode." These PHYs require a soft reset to restore functionality after they are powered back up. This commit defines the soft_reset function to use genphy_soft_reset during phy_init_hw to accommodate this. Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: don't set phydev->link from MACDoug Berger2019-10-181-3/+1
| | | | | | | | | | | | | | | | | | | When commit 28b2e0d2cd13 ("net: phy: remove parameter new_link from phy_mac_interrupt()") removed the new_link parameter it set the phydev->link state from the MAC before invoking phy_mac_interrupt(). However, once commit 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") was added this initialization prevents the proper determination of the connection parameters by the function genphy_read_status(). This commit removes that initialization to restore the proper functionality. Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: Doug Berger <opendmb@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: micrel: Update KSZ87xx PHY nameMarek Vasut2019-10-181-2/+2
| | | | | | | | | | | | | | | | | The KSZ8795 PHY ID is in fact used by KSZ8794/KSZ8795/KSZ8765 switches. Update the PHY ID and name to reflect that, as this family of switches is commonly refered to as KSZ87xx Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYsMarek Vasut2019-10-181-4/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The KSZ8051 PHY and the KSZ8794/KSZ8795/KSZ8765 switch share exactly the same PHY ID. Since KSZ8051 is higher in the ksphy_driver[] list of PHYs in the micrel PHY driver, it is used even with the KSZ87xx switch. This is wrong, since the KSZ8051 configures registers of the PHY which are not present on the simplified KSZ87xx switch PHYs and misconfigures other registers of the KSZ87xx switch PHYs. Fortunatelly, it is possible to tell apart the KSZ8051 PHY from the KSZ87xx switch by checking the Basic Status register Bit 0, which is read-only and indicates presence of the Extended Capability Registers. The KSZ8051 PHY has those registers while the KSZ87xx switch does not. This patch implements simple check for the presence of this bit for both the KSZ8051 PHY and KSZ87xx switch, to let both use the correct PHY driver instance. Fixes: 9d162ed69f51 ("net: phy: micrel: add support for KSZ8795") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: Add shared regmap mutexMarek Vasut2019-10-175-9/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | The KSZ driver uses one regmap per register width (8/16/32), each with it's own lock, but accessing the same set of registers. In theory, it is possible to create a race condition between these regmaps, although the underlying bus (SPI or I2C) locking should assure nothing bad will really happen and the accesses would be correct. To make the driver do the right thing, add one single shared mutex for all the regmaps used by the driver instead. This assures that even if some future hardware is on a bus which does not serialize the accesses the same way SPI or I2C does, nothing bad will happen. Note that the status_mutex was unused and only initied, hence it was renamed and repurposed as the regmap mutex. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: Do not reinit mutexes on KSZ87xxMarek Vasut2019-10-171-4/+0
| | | | | | | | | | | | | | | | The KSZ87xx driver calls mutex_init() on mutexes already inited in ksz_common.c ksz_switch_register(). Do not do it twice, drop the reinitialization. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: David S. Miller <davem@davemloft.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: George McCollister <george.mccollister@gmail.com> Cc: Tristram Ha <Tristram.Ha@microchip.com> Cc: Woojung Huh <woojung.huh@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: fix argument to stmmac_pcs_ctrl_ane()Ben Dooks (Codethink)2019-10-171-1/+1
| | | | | | | | | | | | | | | The stmmac_pcs_ctrl_ane() expects a register address as argument 1, but for some reason the mac_device_info is being passed. Fix the warning (and possible bug) from sparse: drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: expected void [noderef] <asn:2> *ioaddr drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:2613:17: got struct mac_device_info *hw Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* dpaa2-eth: Fix TX FQID valuesIoana Radulescu2019-10-171-0/+44
| | | | | | | | | | | | | | Depending on when MC connects the DPNI to a MAC, Tx FQIDs may not be available during probe time. Read the FQIDs each time the link goes up to avoid using invalid values. In case an error occurs or an invalid value is retrieved, fall back to QDID-based enqueueing. Fixes: 1fa0f68c9255 ("dpaa2-eth: Use FQ-based DPIO enqueue API") Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* dpaa2-eth: add irq for the dpmac connect/disconnect eventFlorin Chiculita2019-10-172-2/+9
| | | | | | | | | | Add IRQ for the DPNI endpoint change event, resolving the issue when a dynamically created DPNI gets a randomly generated hw address when the endpoint is a DPMAC object. Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* usb: hso: obey DMA rules in tiocmgetOliver Neukum2019-10-171-4/+9
| | | | | | | | | | | | | The serial state information must not be embedded into another data structure, as this interferes with cache handling for DMA on architectures without cache coherence.. That would result in data corruption on some architectures Allocating it separately. v2: fix syntax error Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: disable/enable ptp_ref_clk in suspend/resume flowBiao Huang2019-10-161-4/+8
| | | | | | | | disable ptp_ref_clk in suspend flow, and enable it in resume flow. Fixes: f573c0b9c4e0 ("stmmac: move stmmac_clk, pclk, clk_ptp_ref and stmmac_rst to platform structure") Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Fix "link partner" information disappear issueYonglong Liu2019-10-163-4/+12
| | | | | | | | | | | | | | | | | | | | | | Some drivers just call phy_ethtool_ksettings_set() to set the links, for those phy drivers that use genphy_read_status(), if autoneg is on, and the link is up, than execute "ethtool -s ethx autoneg on" will cause "link partner" information disappear. The call trace is phy_ethtool_ksettings_set()->phy_start_aneg() ->linkmode_zero(phydev->lp_advertising)->genphy_read_status(), the link didn't change, so genphy_read_status() just return, and phydev->lp_advertising is zero now. This patch moves the clear operation of lp_advertising from phy_start_aneg() to genphy_read_lpa()/genphy_c45_read_lpa(), and if autoneg on and autoneg not complete, just clear what the generic functions care about. Fixes: 88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: usb: sr9800: fix uninitialized local variableValentin Vidic2019-10-161-1/+1
| | | | | | | | | Make sure res does not contain random value if the call to sr_read_cmd fails for some reason. Reported-by: syzbot+f1842130bbcfb335bac1@syzkaller.appspotmail.com Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: Fix RGMII_MODE_EN value for GENET v1/2/3Florian Fainelli2019-10-162-1/+6
| | | | | | | | | | The RGMII_MODE_EN bit value was 0 for GENET versions 1 through 3, and became 6 for GENET v4 and above, account for that difference. Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: stmmac: make tc_flow_parsers staticBen Dooks (Codethink)2019-10-161-1/+1
| | | | | | | | | | The tc_flow_parsers is not used outside of the driver, so make it static to avoid the following sparse warning: drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c:516:3: warning: symbol 'tc_flow_parsers' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* davinci_cpdma: make cpdma_chan_split_pool staticBen Dooks (Codethink)2019-10-161-1/+1
| | | | | | | | | | | The cpdma_chan_split_pool() function is not used outside of the driver, so make it static to avoid the following sparse warning: drivers/net/ethernet/ti/davinci_cpdma.c:725:5: warning: symbol 'cpdma_chan_split_pool' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: i82596: fix dma_alloc_attr for sni_82596Thomas Bogendoerfer2019-10-163-4/+8
| | | | | | | | | | | | Commit 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs") switched dma allocation over to dma_alloc_attr, but didn't convert the SNI part to request consistent DMA memory. This broke sni_82596 since driver doesn't do dma_cache_sync for performance reasons. Fix this by using different DMA_ATTRs for lasi_82596 and sni_82596. Fixes: 7f683b920479 ("i825xx: switch to switch to dma_alloc_attrs") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: sja1105: Use the correct style for SPDX License IdentifierNishad Kamdar2019-10-165-10/+10
| | | | | | | | | | | | | | | | This patch corrects the SPDX License Identifier style in header files related to Distributed Switch Architecture drivers for NXP SJA1105 series Ethernet switch support. It uses an expilict block comment for the SPDX License Identifier. Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: mediatek: Fix MT7629 missing GMII mode supportMarkLee2019-10-161-0/+1
| | | | | | | | | | | | | | In the original design, mtk_phy_connect function will set ge_mode=1 if phy-mode is GMII(PHY_INTERFACE_MODE_GMII) and then set the correct ge_mode to ETHSYS_SYSCFG0 register. This logic was broken after apply mediatek PHYLINK patch(Fixes tag), the new mtk_mac_config function will not set ge_mode=1 for GMII mode hence the final ETHSYS_SYSCFG0 setting will be incorrect for mt7629 GMII mode. This patch add the missing logic back to fix it. Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support") Signed-off-by: MarkLee <Mark-MC.Lee@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cavium: Use the correct style for SPDX License IdentifierNishad Kamdar2019-10-161-1/+1
| | | | | | | | | | | | | | | This patch corrects the SPDX License Identifier style in header files related to Cavium Ethernet drivers. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: microchip: Use the correct style for SPDX License IdentifierNishad Kamdar2019-10-152-4/+4
| | | | | | | | | | | | | | | | This patch corrects the SPDX License Identifier style in header files related to Distributed Switch Architecture drivers for Microchip KSZ series switch support. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: broadcom: have drivers select DIMLIB as neededRandy Dunlap2019-10-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | NET_VENDOR_BROADCOM is intended to control a kconfig menu only. It should not have anything to do with code generation. As such, it should not select DIMLIB for all drivers under NET_VENDOR_BROADCOM. Instead each driver that needs DIMLIB should select it (being the symbols SYSTEMPORT, BNXT, and BCMGENET). Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907021810220.13058@ramsan.of.borg/ Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Cc: Tal Gilboa <talgi@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: netdev@vger.kernel.org Cc: linux-rdma@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Sagi Grimberg <sagi@grimberg.me> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: bcmgenet: Set phydev->dev_flags only for internal PHYsFlorian Fainelli2019-10-151-2/+3
| | | | | | | | | | | | phydev->dev_flags is entirely dependent on the PHY device driver which is going to be used, setting the internal GENET PHY revision in those bits only makes sense when drivers/net/phy/bcm7xxx.c is the PHY driver being used. Fixes: 487320c54143 ("net: bcmgenet: communicate integrated PHY revision to PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'wireless-drivers-for-davem-2019-10-15' of ↵David S. Miller2019-10-1511-189/+239
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 5.4 Second set of fixes for 5.4. ath10k regression and iwlwifi BAD_COMMAND bug are the ones getting most reports at the moment. ath10k * fix throughput regression on QCA98XX iwlwifi * fix initialization of 3168 devices (the infamous BAD_COMMAND bug) * other smaller fixes rt2x00 * don't include input-polldev.h header * fix hw reset to work during first 5 minutes of system run ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * ath10k: fix latency issue for QCA988xMiaoqing Pan2019-10-141-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (kvalo: cherry picked from commit 1340cc631bd00431e2f174525c971f119df9efa1 in wireless-drivers-next to wireless-drivers as this a frequently reported regression) Bad latency is found on QCA988x, the issue was introduced by commit 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug"). If uart_pin_workaround is false, this change will set uart pin even if uart_print is false. Tested HW: QCA9880 Tested FW: 10.2.4-1.0-00037 Fixes: 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug") Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * iwlwifi: pcie: change qu with jf devices to use qu configurationLuca Coelho2019-10-091-137/+137
| | | | | | | | | | | | | | | | | | | | | | There were a bunch of devices with qu and jf that were loading the configuration with pu and jf, which is wrong. Fix them all accordingly. Additionally, remove 0x1010 and 0x1210 subsytem IDs from the list, since they are obviously wrong, and 0x0044 and 0x0244, which were duplicate. Cc: stable@vger.kernel.org # 5.1+ Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: exclude GEO SAR support for 3168Luca Coelho2019-10-091-7/+9
| | | | | | | | | | | | | | | | | | | | We currently support two NICs in FW version 29, namely 7265D and 3168. Out of these, only 7265D supports GEO SAR, so adjust the function that checks for it accordingly. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Fixes: f5a47fae6aa3 ("iwlwifi: mvm: fix version check for GEO_TX_POWER_LIMIT support") Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: pcie: fix memory leaks in iwl_pcie_ctxt_info_gen3_initNavid Emamdoost2019-10-091-11/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In iwl_pcie_ctxt_info_gen3_init there are cases that the allocated dma memory is leaked in case of error. DMA memories prph_scratch, prph_info, and ctxt_info_gen3 are allocated and initialized to be later assigned to trans_pcie. But in any error case before such assignment the allocated memories should be released. First of such error cases happens when iwl_pcie_init_fw_sec fails. Current implementation correctly releases prph_scratch. But in two sunsequent error cases where dma_alloc_coherent may fail, such releases are missing. This commit adds release for prph_scratch when allocation for prph_info fails, and adds releases for prph_scratch and prph_info when allocation for ctxt_info_gen3 fails. Fixes: 2ee824026288 ("iwlwifi: pcie: support context information for 22560 devices") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: dbg_ini: fix memory leak in alloc_sgtableNavid Emamdoost2019-10-091-0/+1
| | | | | | | | | | | | | | | | In alloc_sgtable if alloc_page fails, the alocated table should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: pcie: fix rb_allocator workqueue allocationJohannes Berg2019-10-091-4/+11
| | | | | | | | | | | | | | | | | | | | We don't handle failures in the rb_allocator workqueue allocation correctly. To fix that, move the code earlier so the cleanup is easier and we don't have to undo all the interrupt allocations in this case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: pcie: fix indexing in command dump for new HWJohannes Berg2019-10-091-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We got a crash in iwl_trans_pcie_get_cmdlen(), while the TFD was being accessed to sum up the lengths. We want to access the TFD here, which is the information for the hardware. We always only allocate 32 buffers for the cmd queue, but on newer hardware (using TFH) we can also allocate only a shorter hardware array, also only 32 TFDs. Prior to the TFH, we had to allocate a bigger TFD array but would make those point to a smaller set of buffers. Additionally, now max_tfd_queue_size is up to 65536, so we can access *way* out of bounds of a really only 32-entry array, so it crashes. Fix this by making the TFD index depend on which hardware we are using right now. While changing the calculation, also fix it to not use void ptr arithmetic, but cast to u8 * before. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: mvm: fix race in sync rx queue notificationNaftali Goldstein2019-10-091-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consider the following flow: 1. Driver starts to sync the rx queues due to a delba. mvm->queue_sync_cookie=1. This rx-queues-sync is synchronous, so it doesn't increment the cookie until all rx queues handle the notification from FW. 2. During this time, driver starts to sync rx queues due to nssn sync required. The cookie's value is still 1, but it doesn't matter since this rx-queue-sync is non-synchronous so in the notification handler the cookie is ignored. What _does_ matter is that this flow increments the cookie to 2 immediately. Remember though that the FW won't start servicing this command until it's done with the previous one. 3. FW is still handling the first command, so it sends a notification with internal_notif->sync=1, and internal_notif->cookie=0, which triggers a WARN_ONCE. The solution for this race is to only use the mvm->queue_sync_cookie in case of a synchronous sync-rx-queues. This way in step 2 the cookie's value won't change so we avoid the WARN. The commit in the "fixes" field is the first commit to introduce non-synchronous sending of this command to FW. Fixes: 3c514bf831ac ("iwlwifi: mvm: add a loose synchronization of the NSSN across Rx queues") Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: mvm: force single phy initHaim Dreyfuss2019-10-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | The PHY is initialized during device initialization, but devices with the tx_siso_diversity flag set need to send PHY_CONFIGURATION_CMD first, otherwise the PHY would be reinitialized, causing a SYSASSERT. To fix this, use a bit that tells the FW not to complete the PHY initialization before a PHY_CONFIGURATION_CMD is received. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: fix ACPI table revision checksLuca Coelho2019-10-092-10/+24
| | | | | | | | | | | | | | | | | | | | | | We can't check for the ACPI table revision validity in the same if where we check if the package was read correctly, because we return PTR_ERR(pkg) and if the table is not valid but the pointer is, we would return a valid pointer as an error. Fix that by moving the table checks to a separate if and return -EINVAL if it's not valid. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * iwlwifi: don't access trans_cfg via cfgLuca Coelho2019-10-091-6/+6
| | | | | | | | | | | | | | | | We copy cfg->trans to trans->trans_cfg at the very beginning, so don't try to access it via cfg->trans anymore, because the cfg may be unset in later cases. Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
| * rt2x00: remove input-polldev.h headerDmitry Torokhov2019-10-081-1/+0
| | | | | | | | | | | | | | | | The driver does not use input subsystem so we do not need this header, and it is being removed, so stop pulling it in. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
| * rt2x00: initialize last_resetStanislaw Gruszka2019-10-021-1/+1
| | | | | | | | | | | | | | | | | | | | Initialize last_reset variable to INITIAL_JIFFIES, otherwise it is not possible to test H/W reset for first 5 minutes of system run. Fixes: e403fa31ed71 ("rt2x00: add restart hw") Reported-and-tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
* | net: aquantia: correctly handle macvlan and multicast coexistenceDmitry Bogdanov2019-10-153-22/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | macvlan and multicast handling is now mixed up. The explicit issue is that macvlan interface gets broken (no traffic) after clearing MULTICAST flag on the real interface. We now do separate logic and consider both ALLMULTI and MULTICAST flags on the device. Fixes: 11ba961c9161 ("net: aquantia: Fix IFF_ALLMULTI flag functionality") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: aquantia: do not pass lro session with invalid tcp checksumDmitry Bogdanov2019-10-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Individual descriptors on LRO TCP session should be checked for CRC errors. It was discovered that HW recalculates L4 checksums on LRO session and does not break it up on bad L4 csum. Thus, driver should aggregate HW LRO L4 statuses from all individual buffers of LRO session and drop packet if one of the buffers has bad L4 checksum. Fixes: f38f1ee8aeb2 ("net: aquantia: check rx csum for all packets in LRO session") Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: aquantia: when cleaning hw cache it should be toggledIgor Russkikh2019-10-154-6/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | >From HW specification to correctly reset HW caches (this is a required workaround when stopping the device), register bit should actually be toggled. It was previosly always just set. Due to the way driver stops HW this never actually caused any issues, but it still may, so cleaning this up. Fixes: 7a1bb49461b1 ("net: aquantia: fix potential IOMMU fault after driver unbind") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: aquantia: temperature retrieval fixIgor Russkikh2019-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Chip temperature is a two byte word, colocated internally with cable length data. We do all readouts from HW memory by dwords, thus we should clear extra high bytes, otherwise temperature output gets weird as soon as we attach a cable to the NIC. Fixes: 8f8940118654 ("net: aquantia: add infrastructure to readout chip temperature") Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | netdevsim: Fix error handling in nsim_fib_init and nsim_fib_exitYueHaibing2019-10-131-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return. In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free: BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim] Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499 CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work [ipv6] Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x380 mm/kasan/report.c:351 __kasan_report+0x149/0x18d mm/kasan/report.c:482 kasan_report+0xe/0x20 mm/kasan/common.c:618 nsim_fib_event_nb+0x342/0x570 [netdevsim] notifier_call_chain+0x52/0xf0 kernel/notifier.c:95 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30 call_fib6_entry_notifiers+0xc1/0x100 [ipv6] fib6_add+0x92e/0x1b10 [ipv6] __ip6_ins_rt+0x40/0x60 [ipv6] ip6_ins_rt+0x84/0xb0 [ipv6] __ipv6_ifa_notify+0x4b6/0x550 [ipv6] ipv6_ifa_notify+0xa5/0x180 [ipv6] addrconf_dad_completed+0xca/0x640 [ipv6] addrconf_dad_work+0x296/0x960 [ipv6] process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269 worker_thread+0x5c/0x670 kernel/workqueue.c:2415 kthread+0x1d7/0x200 kernel/kthread.c:255 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Allocated by task 3388: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:748 [inline] ops_init+0xa9/0x220 net/core/net_namespace.c:127 __register_pernet_operations net/core/net_namespace.c:1135 [inline] register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253 nsim_fib_init+0x12/0x70 [netdevsim] veth_get_link_ksettings+0x2b/0x50 [veth] do_one_initcall+0xd4/0x454 init/main.c:939 do_init_module+0xe0/0x330 kernel/module.c:3490 load_module+0x3c2f/0x4620 kernel/module.c:3841 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3534: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1474 [inline] slab_free mm/slub.c:3016 [inline] kfree+0xe9/0x2d0 mm/slub.c:3957 ops_free net/core/net_namespace.c:151 [inline] ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184 ops_free_list net/core/net_namespace.c:182 [inline] __unregister_pernet_operations net/core/net_namespace.c:1165 [inline] unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271 nsim_fib_exit+0x11/0x20 [netdevsim] nsim_module_exit+0x16/0x21 [netdevsim] __do_sys_delete_module kernel/module.c:1015 [inline] __se_sys_delete_module kernel/module.c:958 [inline] __x64_sys_delete_module+0x244/0x330 kernel/module.c:958 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 59c84b9fcf42 ("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net/ibmvnic: Fix EOI when running in XIVE mode.Cédric Le Goater2019-10-131-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pSeries machines on POWER9 processors can run with the XICS (legacy) interrupt mode or with the XIVE exploitation interrupt mode. These interrupt contollers have different interfaces for interrupt management : XICS uses hcalls and XIVE loads and stores on a page. H_EOI being a XICS interface the enable_scrq_irq() routine can fail when the machine runs in XIVE mode. Fix that by calling the EOI handler of the interrupt chip. Fixes: f23e0643cd0b ("ibmvnic: Clear pending interrupt after device reset") Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: lpc_eth: avoid resetting twiceAlexandre Belloni2019-10-131-3/+0
| | | | | | | | | | | | | | | | __lpc_eth_shutdown is called after __lpc_eth_reset but it is already calling __lpc_eth_reset. Avoid resetting the IP twice. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | r8169: fix jumbo packet handling on resume from suspendHeiner Kallweit2019-10-111-24/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mariusz reported that invalid packets are sent after resume from suspend if jumbo packets are active. It turned out that his BIOS resets chip settings to non-jumbo on resume. Most chip settings are re-initialized on resume from suspend by calling rtl_hw_start(), so let's add configuring jumbo to this function. There's nothing wrong with the commit marked as fixed, it's just the first one where the patch applies cleanly. Fixes: 7366016d2d4c ("r8169: read common register for PCI commit") Reported-by: Mariusz Bialonczyk <manio@skyboo.net> Tested-by: Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* | net: add {READ|WRITE}_ONCE() annotations on ->rskq_accept_headEric Dumazet2019-10-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | reqsk_queue_empty() is called from inet_csk_listen_poll() while other cpus might write ->rskq_accept_head value. Use {READ|WRITE}_ONCE() to avoid compiler tricks and potential KCSAN splats. Fixes: fff1f3001cc5 ("tcp: add a spinlock to protect struct request_sock_queue") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* | tun: remove possible false sharing in tun_flow_update()Eric Dumazet2019-10-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As mentioned in https://github.com/google/ktsan/wiki/READ_ONCE-and-WRITE_ONCE#it-may-improve-performance a C compiler can legally transform if (e->queue_index != queue_index) e->queue_index = queue_index; to : e->queue_index = queue_index; Note that the code using jiffies has no issue, since jiffies has volatile attribute. if (e->updated != jiffies) e->updated = jiffies; Fixes: 83b1bc122cab ("tun: align write-heavy flow entry members to a cache line") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Zhang Yu <zhangyu31@baidu.com> Cc: Wang Li <wangli39@baidu.com> Cc: Li RongQing <lirongqing@baidu.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* | net: usb: qmi_wwan: add Telit 0x1050 compositionDaniele Palmas2019-10-101-0/+1
| | | | | | | | | | | | | | | | | | | | This patch adds support for Telit FN980 0x1050 composition 0x1050: tty, adb, rmnet, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* | s390/qeth: Fix initialization of vnicc cmd masks during set onlineAlexandra Winter2019-10-101-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Without this patch, a command bit in the supported commands mask is only ever set to unsupported during set online. If a command is ever marked as unsupported (e.g. because of error during qeth_l2_vnicc_query_cmds), subsequent successful initialization (offline/online) would not bring it back. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
* | s390/qeth: Fix error handling during VNICC initializationAlexandra Winter2019-10-101-4/+7
| | | | | | | | | | | | | | | | | | | | Smatch discovered the use of uninitialized variable sup_cmds in error paths. Fixes: caa1f0b10d18 ("s390/qeth: add VNICC enable/disable support") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-03 17:34:59 +0100