summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* nvmem: Add driver for the i.MX IIMMichael Grzeschik2017-04-083-0/+186
| | | | | | | | | | | | | | | | | | This adds a readonly nvmem driver for the i.MX IC Identification Module (IIM). The IIM is found on the older i.MX SoCs like the i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and the i.MX53. The IIM can control up to 8 fuse banks with 256 bit each. Not all of the banks are equipped on the different SoCs. The actual number of fuses differ from 512 on the i.MX27 and 1152 on the i.MX53. The fuses are one time writable, but writing is currently not supported in the driver. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvmem: imx-ocotp: fix usage of "dev" pointersRichard Leitner2017-04-081-1/+3
| | | | | | | | | | Assign the correct dev pointer to struct ocotp_priv during probe. This is needed to display dev_* messages correctly. Furthermore harmonize the usage of dev (instead of &pdev->dev) in the probe function. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvmem: sunxi-sid: add support for H3's SID controllerIcenowy Zheng2017-04-081-0/+62
| | | | | | | | | | | | | | The H3 SoC have a bigger SID controller, which has its direct read address at 0x200 position in the SID block, not 0x0. Also, H3 SID controller has some silicon bug that makes the direct read value wrong at cold boot, add code to workaround the bug. (This bug has already been fixed on A64 and later SoCs) Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvmem: sunxi-sid: read NVMEM size from device compatibleIcenowy Zheng2017-04-081-4/+23
| | | | | | | | | | | | | | Sometimes the SID device have more memory address space than the real NVMEM size (for the registers used to read/write the SID). Fetch the NVMEM size from device compatible, rather than the memory address space's length, in order to prepare for adding some registers-based read support. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* nvmem: core: Allow allocating several anonymous nvmem devicesAban Bedel2017-04-081-1/+2
| | | | | | | | | | | | | | | | Currently the nvmem core expect the config to provide a name and ID that are then used to create the device name. When no device name is given 'nvmem' is used. However if there is several such anonymous devices they all get named 'nvmem0', which doesn't work. To fix this problem use the ID from the config only when the config also provides a name. When no name is provided take the uinque ID of the nvmem device instead. Signed-off-by: Aban Bedel <albeu@free.fr> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fpga: Add support for Xilinx LogiCORE PR DecouplerMoritz Fischer2017-04-083-0/+172
| | | | | | | | | | | | | | This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* auxdisplay: Move arm-charlcd.c to drivers/auxdisplay folderAndy Shevchenko2017-04-085-11/+11
| | | | | | | | | | | It looks like arm-charlcd.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* auxdisplay: Move panel.c to drivers/auxdisplay folderAndy Shevchenko2017-04-085-281/+281
| | | | | | | | | | | It looks like panel.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* auxdisplay: ht16k33: use le16_to_cpup() to fetch LE16 dataDmitry Torokhov2017-04-081-4/+8
| | | | | | | | | | The data read from the device is 3 little-endian words, so let's annotate them as such and use le16_to_cpu() to convert them to host endianness - it might turn out to be a bit more performant, and it expresses the conversion more clearly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* auxdisplay: img-ascii-lcd: Fix module autoloadJavier Martinez Canillas2017-04-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/auxdisplay/img-ascii-lcd.ko | grep alias $ After this patch: $ modinfo drivers/auxdisplay/img-ascii-lcd.ko | grep alias alias: of:N*T*Cmti,sead3-lcdC* alias: of:N*T*Cmti,sead3-lcd alias: of:N*T*Cmti,malta-lcdC* alias: of:N*T*Cmti,malta-lcd alias: of:N*T*Cimg,boston-lcdC* alias: of:N*T*Cimg,boston-lcd Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* auxdisplay: ht16k33: don't access uninitialized dataArnd Bergmann2017-04-081-1/+7
| | | | | | | | | | | | | | | | | | | | gcc-7.0.1 points out that we copy uninitialized data from the stack into a per-device structure: drivers/auxdisplay/ht16k33.c: In function 'ht16k33_keypad_irq_thread': arch/x86/include/asm/string_32.h:78:16: error: 'new_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/include/asm/string_32.h:79:22: error: '*((void *)&new_state+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] The access is harmless because we never read the data, but we are better off not doing this, so this changes the code to only copy the data that was actually initialized. To make sure we don't overflow the stack with an incorrect DT, we also need to add a sanity checkin the probe function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* auxdisplay: hd44780: Fix DT properties to include units of measurementGeert Uytterhoeven2017-04-081-2/+3
| | | | | | | | | | | | | | | DT properties specifying physical properties should contain appropriate suffices indicating the units of measurement. Hence amend the HD44780 DT bindings to add "chars" suffixes to the "display-height" and "display-width" properties, and update the driver to parse them. Fixes: dd9502a9e9156dd8 ("dt-bindings: auxdisplay: Add bindings for Hitachi HD44780") Fixes: d47d88361feea2ce ("auxdisplay: Add HD44780 Character LCD support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fpga pr ip: Platform driver for Altera Partial Reconfiguration IP.Matthew Gerlach2017-04-083-0/+76
| | | | | | | | | This adds a platform bus driver for a fpga-mgr driver that uses the Altera Partial Reconfiguration IP component. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fpga pr ip: Core driver support for Altera Partial Reconfiguration IP.Matthew Gerlach2017-04-083-0/+226
| | | | | | | | | | | Adding the core functions necessary for a fpga-mgr driver for the Altera Partial IP component. It is intended for these functions to be used by the various bus implementations like the platform bus or the PCIe bus. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fpga: add config complete timeoutAlan Tull2017-04-081-0/+3
| | | | | | | | Adding timeout for maximum allowed time for FPGA to go to operating mode after a FPGA region has been programmed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fpga manager: Add Xilinx slave serial SPI driverAnatolij Gustschin2017-04-083-0/+206
| | | | | | | | | | | The driver loads FPGA firmware over SPI, using the "slave serial" configuration interface on Xilinx FPGAs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* fpga: altera_freeze_bridge: Constify opsMoritz Fischer2017-04-081-1/+1
| | | | | | | | | | | The ops are not changing, make them const. Signed-off-by: Moritz Fischer <mdf@kernel.org> Cc: Alan Tull <atull@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: linux-fpga@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* coresight: Fixes coresight DT parse to get correct output port ID.Mike Leach2017-04-081-1/+1
| | | | | | | | | | | | | | | | | | | | | Corrected to get the port numbering to allow programmable replicator driver to operate correctly. By convention, CoreSight devices number ports, not endpoints in the .dts files:- port { reg<N> endpoint { } } Existing code read endpoint number - always 0x0, rather than the correct port number. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: implement fsyncAlexander Usyskin2017-04-081-0/+72
| | | | | | | | | | When write() returns successfully, it is only assumed that a message was successfully queued. Add fsync syscall implementation to help user-space ensure that all data is written. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: bus: elminate variable length arraysTomas Winkler2017-04-081-4/+5
| | | | | | | | | | | | | | Though VLA are supported by CC99 there are many cavities and should be avoided. 'const size_t len = sizeof()' that we used may not be set at the compile time hence generating VLA code. This fixes also sparse warning warning: Variable length array is used type. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: hbm: remove variable length arraysTomas Winkler2017-04-081-15/+14
| | | | | | | | | | | | | | Though VLA are supported by CC99 there are many cavities and should be avoided. 'const size_t len = sizeof()' that we used may not be set at the compile time hence generating VLA code. This fixes also sparse warning warning: Variable length array is used type. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: drop amthif internal clientAlexander Usyskin2017-04-089-507/+15
| | | | | | | | | | | | | | | | | AMTHIF has special support in the mei drive, it handles multiplexing multiple user space connection above single me client connection. Since there is no additional addressing information there is a strict requirement on the traffic order on each connection and on the "read after write" order within the connection. This creates a lot of complexity mostly because the other client types do not necessarily fall under the same restriction. After carefully studying the use of the AMTHIF client, we came to conclusion that the multiplexing is not really utilized by any application and we may safely remove that support and significantly simplify the driver. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* mei: add pci driver ops shutdown handler.Tomas Winkler2017-04-082-3/+57
| | | | | | | | | | | | The shutdown handler quiesces the device, it performs link reset in order to close all connections and notify the device that is not longer managed by the driver. This is essentially a stripped down version of the PCI remove() function where only the necessary amount of work is done to stop any further activity. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* drivers/misc: aspeed-lpc-ctrl: fix printk format warning againArnd Bergmann2017-04-081-2/+1
| | | | | | | | | | | | | The format string is still broken after the first attempt to fix it: drivers/misc/aspeed-lpc-ctrl.c: In function 'aspeed_lpc_ctrl_probe': drivers/misc/aspeed-lpc-ctrl.c:232:17: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=] We can actually just print the resource structure directly here. Fixes: 132c93d4215c ("drivers/misc: Aspeed LPC control fix compile error and warning") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge 4.11-rc4 into char-misc-nextGreg Kroah-Hartman2017-03-27391-3458/+5646
|\ | | | | | | | | | | We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'char-misc-4.11-rc4' of ↵Linus Torvalds2017-03-2619-85/+99
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "A smattering of different small fixes for some random driver subsystems. Nothing all that major, just resolutions for reported issues and bugs. All have been in linux-next with no reported issues" * tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) extcon: int3496: Set the id pin to direction-input if necessary extcon: int3496: Use gpiod_get instead of gpiod_get_index extcon: int3496: Add dependency on X86 as it's Intel specific extcon: int3496: Add GPIO ACPI mapping table extcon: int3496: Rename GPIO pins in accordance with binding vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly ppdev: fix registering same device name parport: fix attempt to write duplicate procfiles auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches Drivers: hv: vmbus: Don't leak memory when a channel is rescinded Drivers: hv: vmbus: Don't leak channel ids Drivers: hv: util: don't forget to init host_ts.lock Drivers: hv: util: move waiting for release to hv_utils_transport itself vmbus: remove hv_event_tasklet_disable/enable vmbus: use rcu for per-cpu channel list mei: don't wait for os version message reply mei: fix deadlock on mei reset intel_th: pci: Add Gemini Lake support intel_th: pci: Add Denverton SOC support intel_th: Don't leak module refcount on failure to activate ...
| | * Merge tag 'extcon-fixes-for-4.11-rc3' of ↵Greg Kroah-Hartman2017-03-222-12/+29
| | |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-linus Chanwoo writes: Update extcon for v4.11-rc3 This patch fixes issues for Intel INT3496 ACPI device as following: - Propagate error code of gpiod_to_irq(). - Set the ID pin as the input direction if firmware has the bug - Rename the gpio name for bining according to the documentation. - Add gpio acpi mapping table and the dependency on X86. - Use the devm_gpiod_get() instead of gpiod_get_index because of acpi mapping table.
| | | * extcon: int3496: Set the id pin to direction-input if necessaryHans de Goede2017-03-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the new more strict ACPI gpio code the dsdt's IoRestriction flags are honored on gpiod_get, but in some dsdt's it is wrong, so explicitly call gpiod_direction_input on the id gpio if necessary. This fixes the following errors when the int3496 code is used together with the new more strict ACPI gpio code: [ 2382.484415] gpio gpiochip1: (INT33FF:01): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 2382.484425] gpio gpiochip1: (INT33FF:01): unable to lock HW IRQ 3 for IRQ [ 2382.484429] genirq: Failed to request resources for INT3496:00 (irq 174) on irqchip chv-gpio [ 2382.484518] intel-int3496 INT3496:00: can't request IRQ for USB ID GPIO: -22 [ 2382.500359] intel-int3496: probe of INT3496:00 failed with error -22 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | | * extcon: int3496: Use gpiod_get instead of gpiod_get_indexHans de Goede2017-03-221-9/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we've an acpi mapping table we should be using gpiod_get instead of gpiod_get_index. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | | * extcon: int3496: Add dependency on X86 as it's Intel specificPeter Robinson2017-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add dependency on X86 so it doesn't show up on other arches and add a option for compile test so it still gets build coverage. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | | * extcon: int3496: Add GPIO ACPI mapping tableAndy Shevchenko2017-03-221-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to make GPIO ACPI library stricter prepare users of gpiod_get_index() to correctly behave when there no mapping is provided by firmware. Here we add explicit mapping between _CRS GpioIo() resources and their names used in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | | * extcon: int3496: Rename GPIO pins in accordance with bindingAndy Shevchenko2017-03-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update GPIO pin names in extcon-intel-int3496.c driver to follow the existing extcon binding. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | | * extcon: int3496: Propagate error code of gpiod_to_irq()Andy Shevchenko2017-03-131-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gpiod_to_irq() doesn't return 0. Thus, we just adjust condition and replace -EINVAL by actual error code it returns. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
| | * | vmw_vmci: handle the return value from pci_alloc_irq_vectors correctlyChristoph Hellwig2017-03-161-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It returns the number of vectors allocated when successful, so check for a negative error only. Fixes: 3bb434cd ("vmw_vmci: switch to pci_irq_alloc_vectors") Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Loïc Yhuel <loic.yhuel@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | ppdev: fix registering same device nameSudip Mukherjee2017-03-161-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usually every parallel port will have a single pardev registered with it. But ppdev driver is an exception. This userspace parallel port driver allows to create multiple parrallel port devices for a single parallel port. And as a result we were having a big warning like: "sysfs: cannot create duplicate filename '/devices/parport0/ppdev0.0'". And with that many parallel port printers stopped working. We have been using the minor number as the id field while registering a parralel port device with a parralel port. But when there are multiple parrallel port device for one single parallel port, they all tried to register with the same name like 'pardev0.0' and everything started failing. Use an incremented index as the id instead of the minor number. Fixes: 8b7d3a9d903e ("ppdev: use new parport device model") Cc: stable <stable@vger.kernel.org> # v4.9+ Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656 Bugzilla: https://bugs.archlinux.org/task/52322 Tested-by: James Feeney <james@nurealm.net> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | parport: fix attempt to write duplicate procfilesSudip Mukherjee2017-03-161-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usually every parallel port will have a single pardev registered with it. But ppdev driver is an exception. This userspace parallel port driver allows to create multiple parrallel port devices for a single parallel port. And as a result we were having a nice warning like: "sysctl table check failed: /dev/parport/parport0/devices/ppdev0/timeslice Sysctl already exists" Use the same logic as used in parport_register_device() and register the proc files only once for each parallel port. Fixes: 6fa45a226897 ("parport: add device-model to parport subsystem") Cc: stable <stable@vger.kernel.org> # v4.4+ Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1414656 Bugzilla: https://bugs.archlinux.org/task/52322 Tested-by: James Feeney <james@nurealm.net> Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matchesDmitry Torokhov2017-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The OF device table must be terminated, otherwise we'll be walking past it and into areas unknown. Fixes: 0cad855fbd08 ("auxdisplay: img-ascii-lcd: driver for simple ASCII...") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | Drivers: hv: vmbus: Don't leak memory when a channel is rescindedK. Y. Srinivasan2017-03-161-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we close a channel that has been rescinded, we will leak memory since vmbus_teardown_gpadl() returns an error. Fix this so that we can properly cleanup the memory allocated to the ring buffers. Fixes: ccb61f8a99e6 ("Drivers: hv: vmbus: Fix a rescind handling bug") Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | Drivers: hv: vmbus: Don't leak channel idsK. Y. Srinivasan2017-03-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we cannot allocate memory for the channel, free the relid associated with the channel. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | Drivers: hv: util: don't forget to init host_ts.lockDexuan Cui2017-03-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without the patch, I always get a "BUG: spinlock bad magic" warning. Fixes: 3716a49a81ba ("hv_utils: implement Hyper-V PTP source") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | Drivers: hv: util: move waiting for release to hv_utils_transport itselfVitaly Kuznetsov2017-03-165-16/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Waiting for release_event in all three drivers introduced issues on release as on_reset() hook is not always called. E.g. if the device was never opened we will never get the completion. Move the waiting code to hvutil_transport_destroy() and make sure it is only called when the device is open. hvt->lock serialization should guarantee the absence of races. Fixes: 5a66fecbf6aa ("Drivers: hv: util: kvp: Fix a rescind processing issue") Fixes: 20951c7535b5 ("Drivers: hv: util: Fcopy: Fix a rescind processing issue") Fixes: d77044d142e9 ("Drivers: hv: util: Backup: Fix a rescind processing issue") Reported-by: Dexuan Cui <decui@microsoft.com> Tested-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | vmbus: remove hv_event_tasklet_disable/enableDexuan Cui2017-03-162-27/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the recent introduction of per-channel tasklet, we need to update the way we handle the 3 concurrency issues: 1. hv_process_channel_removal -> percpu_channel_deq vs. vmbus_chan_sched -> list_for_each_entry(..., percpu_list); 2. vmbus_process_offer -> percpu_channel_enq/deq vs. vmbus_chan_sched. 3. vmbus_close_internal vs. the per-channel tasklet vmbus_on_event; The first 2 issues can be handled by Stephen's recent patch "vmbus: use rcu for per-cpu channel list", and the third issue can be handled by calling tasklet_disable in vmbus_close_internal here. We don't need the original hv_event_tasklet_disable/enable since we now use per-channel tasklet instead of the previous per-CPU tasklet, and actually we must remove them due to the side effect now: vmbus_process_offer -> hv_event_tasklet_enable -> tasklet_schedule will start the per-channel callback prematurely, cauing NULL dereferencing (the channel may haven't been properly configured to run the callback yet). Fixes: 631e63a9f346 ("vmbus: change to per channel tasklet") Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | vmbus: use rcu for per-cpu channel listStephen Hemminger2017-03-162-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The per-cpu channel list is now referred to in the interrupt routine. This is mostly safe since the host will not normally generate an interrupt when channel is being deleted but if it did then there would be a use after free problem. To solve, this use RCU protection on ther per-cpu list. Fixes: 631e63a9f346 ("vmbus: change to per channel tasklet") Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | mei: don't wait for os version message replyAlexander Usyskin2017-03-161-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver still struggles with firmwares that do not replay to the OS version request. It is safe not waiting for the replay. First, the driver doesn't do anything with the replay second the connection is closed immediately, hence the packet will be just safely discarded in case it is received and last the driver won't get stuck if the firmware won't reply. Cc: <stable@vger.kernel.org> #4.10+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | mei: fix deadlock on mei resetTomas Winkler2017-03-161-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes 'mei: synchronize irq before initiating a reset' The patch had introduced a deadlock between irq thread and mei_reset() as they are both holding the same device lock. ---> device_lock: mei_reset() <---- interrupt thread device_lock ---> synchornize_irq() wait on interrupt thread == (dead lock) The fix is to call synchronize_irq prior to call locked mei_reset function. Cc: <stable@vger.kernel.org> #4.10+ Fixes: f302bb0de6ac (mei: synchronize irq before initiating a reset) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| | * | intel_th: pci: Add Gemini Lake supportAlexander Shishkin2017-03-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | This adds Intel(R) Trace Hub PCI ID for Gemini Lake SOC. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
| | * | intel_th: pci: Add Denverton SOC supportAlexander Shishkin2017-03-151-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | This adds Intel(R) Trace Hub PCI ID for Denverton SOC. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
| | * | intel_th: Don't leak module refcount on failure to activateAlexander Shishkin2017-03-151-1/+3
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Output 'activation' may fail for the reasons of the output driver, for example, if msc's buffer is not allocated. We forget, however, to drop the module reference in this case. So each attempt at activation in this case leaks a reference, preventing the module from ever unloading. This patch adds the missing module_put() in the activation error path. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: stable@vger.kernel.org # v4.8+
| * | Merge tag 'tty-4.11-rc4' of ↵Linus Torvalds2017-03-264-75/+30
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some tty and serial driver fixes for 4.11-rc4. One of these fix a long-standing issue in the ldisc code that was found by Dmitry Vyukov with his great fuzzing work. The other fixes resolve other reported issues, and there is one revert of a patch in 4.11-rc1 that wasn't correct. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix data race in tty_ldisc_ref_wait() tty: don't panic on OOM in tty_set_ldisc() Revert "tty: serial: pl011: add ttyAMA for matching pl011 console" tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision serial: 8250_dw: Fix breakage when HAVE_CLK=n serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
| | * | tty: fix data race in tty_ldisc_ref_wait()Dmitry Vyukov2017-03-171-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tty_ldisc_ref_wait() checks tty->ldisc under tty->ldisc_sem. But if ldisc==NULL it releases them sem and reloads tty->ldisc without holding the sem. This is wrong and can lead to returning non-NULL ldisc without protection. Don't reload tty->ldisc second time. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: syzkaller@googlegroups.com Cc: linux-kernel@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: One Thousand Gnomes <gnomes@lxorguk.ukuu.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-31 21:09:17 +0100