summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: Link in PHY drivers before others.David S. Miller2009-10-091-4/+4
| | | | | | | | | We need PHY drivers to initialize in a static kernel before the MAC drivers that use them. So link them in first. Based upon a report by Felix Radensky. Signed-off-by: David S. Miller <davem@davemloft.net>
* ibm_newemac: Added 16K Tx FIFO size support for EMAC4Dave Mitchell2009-10-092-2/+6
| | | | | | | | | | | | | Some of the EMAC V4 implementations support 16K Tx FIFOs. This patch adds support for this functionality and fixes typos in the Tx FIFO size error messages. Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com> Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com> Acked-by: Victor Gallardo <vgallardo@appliedmicro.com> Acked-by: Loc Ho <lho@appliedmicro.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Add disable/enable firmare irqs to handler.Ron Mercer2009-10-091-0/+4
| | | | | | | | | This was accidentally omitted from one of the previous patches for firmware event handling. The handler needs to the enable firmware irq mask when it's done processing or it may not get any more events interrupts. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Restore rx mode after internal reset.Ron Mercer2009-10-091-0/+6
| | | | | | | | Call set_multi API after reset recovery. This was exposed by tripping tx_timeout. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix chip reset process.Ron Mercer2009-10-093-0/+106
| | | | | | | | | Add wait for NIC fifo and MGMNT fifo to empty before applying reset. Otherwise broken frames can be processed by management processor and cause it to hang. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix RX multicast filter settings.Ron Mercer2009-10-091-10/+39
| | | | | | | | The addresses were being added to the filter properly, but were not being enabled. This adds enable bit to filter write. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix frame routing for multicast frames.Ron Mercer2009-10-091-2/+2
| | | | | | | | | Broadcast/multicast should always be routed to the default (zeroeth) rx ring. Broadcast frames are already routed correctly. This fixes routing for multicast frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix frame routing issue related to bonding.Ron Mercer2009-10-091-0/+7
| | | | | | | | | | Currently frames are routed based on their type and MAC address. This patch adds the port number on which the frame arrived to the routing. This prevents problems in the case where both interfaces have the same MAC address in a routing configuration. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix RSS hashing values.Ron Mercer2009-10-092-11/+13
| | | | | | | Fix RX queue table size and change from random to default hash values. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2009-10-0914-150/+168
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| * b43: do not stack-allocate pio rx/tx header and tail buffersAlbert Herranz2009-10-073-116/+132
| | | | | | | | | | | | | | | | | | | | | | The DMA-API debugging facility complains about b43 mapping memory from stack for SDIO-based cards. Indeed, b43 currently allocates the PIO RX/TX header and tail buffers from stack. The solution here is to use heap-allocated buffers instead. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: Fix PPC crash in rfkill polling on unloadLarry Finger2009-10-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | In Bugzilla No. 14181, a PowerMac G4 crashes on ifdown or module unload because the rfkill polling has not been stopped. For the x86 architectures, the attempt to reach a now unmapped register is not fatal as it is on PPC. (Includes "b43: Fix locking problem when stopping rfkill polling". -- JWL) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix ADM8211_SYNCTL_RFtype defineRoel Kluin2009-10-071-1/+1
| | | | | | | | | | | | | | A logical of shifts to the left doesn't make sense. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: use %pM for formatted MAC addressesBjorn Helgaas2009-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | User-visible messages should use formatted MAC addresses ("00:01:...") rather than raw ("0001...") so they match other parts of the system. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> CC: ilw@linux.intel.com CC: linux-wireless@vger.kernel.org Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: Protect sanity check against physical device removalMichael Buesch2009-10-071-1/+3
| | | | | | | | | | | | | | | | Fix IRQ mask sanity check for physically pulled device. Tested-by: Andrew Price <andy@andrewprice.me.uk> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlagn: fix compile warning in iwl5000_gain_computationReinette Chatre2009-10-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The return type of abs() was recently changed from int to long. With min()'s type checking we thus need to make sure that values of the same type are compared. This fixes: CC [M] drivers/net/wireless/iwlwifi/iwl-5000.o drivers/net/wireless/iwlwifi/iwl-5000.c: In function ‘iwl5000_gain_computation’: drivers/net/wireless/iwlwifi/iwl-5000.c:320: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: fix compile warningReinette Chatre2009-10-073-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Fixes following on big endian systems: CC [M] drivers/net/wireless/iwlwifi/iwl-rx.o drivers/net/wireless/iwlwifi/iwl-rx.c: In function ‘iwl_rx_reply_rx’: drivers/net/wireless/iwlwifi/iwl-rx.c:1029: warning: integer overflow in expression Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reported-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: fix EEPROM enhance tx power offsetWey-Yi Guy2009-10-071-10/+10
| | | | | | | | | | | | | | | | Set the correct EEPROM offset for enhance tx power for 6000 series Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: incorrect method used for finding valid OTP blocksJay Sternberg2009-10-071-12/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The address stored in the next link address is a word address but when reading the OTP blocks, a byte address is used. Also if the blocks are full and the last link pointer is not zero, then none of the blocks are valid so return an error. The algorithm is simply valid blocks have a next address and that address's contents is zero. Using the wrong address for the next link address gets arbitrary data, obviously. In cases seen, the first block is considered valid when it is not. If the block has in fact been invalidated there may be old data or there may be no data, bad data, or partial data, there is no way of telling. Without this patch it is possible that a device with valid OTP data is unable to work. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: Don't use struct wldev after detach.Michael Buesch2009-10-073-5/+5
| | | | | | | | | | | | | | Don't use struct wldev after detach. This fixes an oops on access. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | znet: Don't claim DMA lock around free_dma() calls.David S. Miller2009-10-081-8/+0
|/ | | | | | | It's not necessary and it's illegal too. Reported-by: Alexander Strakh <strakh@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethoc: limit the number of buffers to 128Thomas Chou2009-10-071-2/+2
| | | | | | | | Only 128 buffer descriptors are supported in the core. Limit the number in case we have more memory. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethoc: use system memory as bufferThomas Chou2009-10-071-20/+44
| | | | | | | | | | | | | This patch enabled the ethoc to allocate system memory as buffer when there is no dedicated buffer memory. Some hardware designs may not have dedicated buffer memory such as on chip or off chip SRAM. In this case, only one memory resource is supplied in the platform data instead of two. Then a DMA buffer can be allocated from system memory and used for the transfer. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethoc: align received packet to make IP header at word boundaryThomas Chou2009-10-071-0/+4
| | | | | | | | | | | | The packet buffer is allocated at 4 bytes boundary, but the IP header length and version bits is located at byte 14. These bit fields access as 32 bits word and caused exception on processors that do not support unaligned access. The patch adds 2 bytes offset to make the bit fields word aligned. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethoc: fix buffer address mappingThomas Chou2009-10-071-4/+3
| | | | | | | | | | | | The pointer address in buffer descriptors is physical address. The pointer that processor used to access packet is virtual address. Though the higher bits of pointer address used by the MAC may be truncated to zero in special case, it is not always true in larger designs. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethoc: fix typo to compute number of tx descriptorsThomas Chou2009-10-071-1/+1
| | | | | | | | | It should be max() instead of min(). Use 1/4 of available descriptors for tx, and there should be at least 2 tx descriptors. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: David S. Miller <davem@davemloft.net>
* au1000_eth: Duplicate test of RX_OVERLEN bit in update_rx_stats()roel kluin2009-10-071-3/+1
| | | | | | | | | in update_rx_stats() the RX_OVERLEN bit is set twice, replace it by RX_RUNT. in au1000_rx() the RX_MISSED_FRAME bit was tested a few lines earlier already Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* netxen: Fix Unlikely(x) > yRoel Kluin2009-10-071-1/+1
| | | | | | | | The closing parenthesis was not on the right location. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* pasemi_mac: ethtool get settings fixValentine Barshak2009-10-071-0/+3
| | | | | | | | | | | Not all pasemi mac interfaces can have a phy attached. For example, XAUI has no phy and phydev is NULL for it. In this case ethtool get settings causes kernel crash. Fix it by returning -EOPNOTSUPP if there's no PHY attached. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* tg3: Fix phylib locking strategyMatt Carlson2009-10-072-28/+14
| | | | | | | | | | Felix Radensky noted that chip resets were generating stack trace dumps. This is because the driver is attempting to acquire the mdio bus mutex while holding the tp->lock spinlock. The fix is to change the code such that every phy access takes the tp->lock spinlock instead. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* rndis_host: support ETHTOOL_GPERMADDRJohn W. Linville2009-10-071-0/+1
| | | | | Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: add kerneldoc commentsTilman Schmidt2009-10-076-44/+166
| | | | | | | | Add kerneldoc comments to some functions in the Gigaset driver. Impact: documentation Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: correct debugging output selectionTilman Schmidt2009-10-071-3/+6
| | | | | | | | | Dump payload data consistently only when DEBUG_STREAM_DUMP debug bit is set. Impact: debugging aid Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: improve error recoveryTilman Schmidt2009-10-071-24/+45
| | | | | | | | | When the Gigaset base stops responding, try resetting the USB connection to recover. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: fix device ERROR response handlingTilman Schmidt2009-10-071-8/+8
| | | | | | | | | | | Clear out pending command that got rejected with 'ERROR' response. This fixes the bug where unloading the driver module would hang with the message: "gigaset: not searching scheduled commands: busy" after a device communication error. Impact: error handling bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: announce if built with debuggingTilman Schmidt2009-10-071-1/+7
| | | | | | | | | Mention in the driver load announcement whether the driver was built with debugging messages enabled, to facilitate support. Impact: informational message Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: handle isoc frame errors more gracefullyTilman Schmidt2009-10-071-11/+7
| | | | | | | | Don't drop the remainder of an URB if an isochronous frame has an error. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: linearize skbTilman Schmidt2009-10-071-0/+6
| | | | | | | | | | | The code of the Gigaset driver assumes that sk_buff-s coming from the ISDN4Linux subsystem are always linear. Explicitly calling skb_linearize() is cheap if they are, but much more robust in case they ever aren't. Impact: robustness improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* gigaset: fix reject/hangup handlingTilman Schmidt2009-10-071-0/+5
| | | | | | | | | | Signal D channel disconnect in a few cases where it was missed, including when an incoming call is disconnected before it was accepted. Impact: error handling improvement Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn: make capidrv module parameter "debugmode" writeableTilman Schmidt2009-10-071-1/+1
| | | | | | | | Being able to change the debugmode module parameter of capidrv on the fly is quite useful for debugging and doesn't do any harm. Signed-off-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn: avoid races in capidrvTilman Schmidt2009-10-071-12/+13
| | | | | | | | | | | | | | In several places, capidrv sends a CAPI message to the ISDN device and then updates its internal state accordingly. If the response message from the device arrives before the state is updated, it may be rejected or processed incorrectly. Avoid these races by updating the state before emitting the message. Impact: bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn: accept CAPI Informational Info values as successTilman Schmidt2009-10-071-1/+1
| | | | | | | | | | | | Info values in the 0x00xx range are defined in the CAPI standard as "Informational, message processed successfully". Therefore a CONNECT_B3_CONF message with an Info value in that range should open an NCCI just as with Info==0. Impact: minor bugfix Signed-off-by: Tilman Schmidt <tilman@imap.cc> Acked-by: Karsten Keil <keil@b1-systems.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Bug fix to properly update ethtool tx-checksumming after ethtool -K ↵Ajit Khaparde2009-10-072-3/+3
| | | | | | | | | | | | | | <ifname> tx off This is a fix for a bug which was a result of wrong use of checksum offload flag. The status of tx-checksumming was not changed from on to off after a 'ethtool -K <ifname> tx off' operation. Use the proper checksum offload flag NETIF_F_HW_CSUM instead of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. Patch is against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Fix a typo in be_cmds.hAjit Khaparde2009-10-071-1/+1
| | | | | | | | MCC_STATUS_NOT_SUPPORTED should be decimal 66 not hex 66. This patch fixes this typo. Patch against net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Bug Fix while accounting of multicast frames during netdev stats updateAjit Khaparde2009-10-071-1/+1
| | | | | | | | | While updating the statistics to be passed via the get_stats, tx multicast frames were being accounted instead of rx multicast frames. This patch fixes the bug. This patch is against the net-2.6 tree. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix lock/mutex warnings.Ron Mercer2009-10-074-17/+9
| | | | | | | | | | Get rid of spinlock and private mutex usage for exclusive access to the HW semaphore register. rtnl_lock already creates exclusive access to this register in all driver API. Add rtnl to firmware worker threads that also use the HW semaphore register. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix queueing of firmware handler in ISR.Ron Mercer2009-10-071-3/+5
| | | | | | | | | Check that we are not already polling firmware events before we queue the firmware event worker, then disable firmware interrupts. Otherwise we can queue the same event multiple times. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* qlge: Fix some bit definitions for reset register.Ron Mercer2009-10-071-3/+3
| | | | | Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* connector: Fix incompatible pointer type warningStephen Boyd2009-10-061-1/+2
| | | | | | | | | | | | | Commit 7069331 (connector: Provide the sender's credentials to the callback, 2009-10-02) changed callbacks to take two arguments but missed this one. drivers/connector/cn_proc.c: In function ‘cn_proc_init’: drivers/connector/cn_proc.c:263: warning: passing argument 3 of ‘cn_add_callback’ from incompatible pointer type Signed-off-by: Stephen Boyd <bebarino@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* be2net: Fix a bug in preparation of mcc wrb which was causing flash ↵Ajit Khaparde2009-10-051-1/+0
| | | | | | | | | | | operation to fail This patch fixes a bug that got introduced in commit 76998bc7. During preparation of mcc wrb, req was being wrongly overwritten and the flash operation was failing. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-20 04:36:46 +0100