summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net/mlx5e: Avoid doing a cleanup call if the profile doesn't have itOr Gerlitz2017-06-151-1/+2
| | | | | | | | | | | | | | The error flow of mlx5e_create_netdev calls the cleanup call of the given profile without checking if it exists, fix that. Currently the VF reps don't register that callback and we crash if getting into error -- can be reproduced by the user doing ctrl^C while attempting to change the sriov mode from legacy to switchdev. Fixes: 26e59d8077a3 '(net/mlx5e: Implement mlx5e interface attach/detach callbacks') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Sabrina Dubroca <sdubroca@redhat.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* net/mlx5e: Remove TC header re-write offloading of ip tosOr Gerlitz2017-06-151-1/+0
| | | | | | | | | | | | | Currently the firmware API is partial and allows to offload only the dscp part of the tos, also, ipv6 support isn't there yet. As such, remove the offloading option of ipv4 dscp till the FW APIs are more comprehensive. Fixes: d79b6df6b10a ('net/mlx5e: Add parsing of TC pedit actions to HW format') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Paul Blakey <paulb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* net/mlx5: Properly check applicability of devlink eswitch commandsOr Gerlitz2017-06-151-37/+40
| | | | | | | | | | | | | | Currently we don't check that the link type is Eth and hence crash on IB ports when attempting to deref esw->xxx, fix that. To avoid repeating this check over and over, put the existing checks and the one on link type in a single helper. Fixes: 7768d1971de6 ('net/mlx5: E-Switch, Add control for encapsulation') Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reported-by: Mohamad Badarnah <mohamadb@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* net/mlx5e: Fix min inline value for VF rep SQsChris Mi2017-06-151-0/+2
| | | | | | | | | | | | | | | The offending commit only changed the code path for PF/VF, but it didn't take care of VF representors. As a result, since params->tx_min_inline_mode for VF representors is kzalloced to 0 (MLX5_INLINE_MODE_NONE), all VF reps SQs were set to that mode. This actually works on CX5 by default but broke CX4. Fix that by adding a call to query the min inline mode from the VF rep build up code. Fixes: a6f402e49901 ("net/mlx5e: Tx, no inline copy on ConnectX-5") Signed-off-by: Chris Mi <chrism@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* net/mlx5e: Fix timestamping capabilities reportingMaor Dickman2017-06-151-4/+4
| | | | | | | | | | Misuse of (BIT) macro caused to report wrong flags for "Hardware Transmit Timestamp Modes" and "Hardware Receive Filter Modes" Fixes: ef9814deafd0 ('net/mlx5e: Add HW timestamping (TS) support') Signed-off-by: Maor Dickman <maord@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* net/mlx5: Wait for FW readiness before initializing command interfaceEli Cohen2017-06-151-2/+12
| | | | | | | | | | | | | | Before attempting to initialize the command interface we must wait till the fw_initializing bit is clear. If we fail to meet this condition the hardware will drop our configuration, specifically the descriptors page address. This scenario can happen when the firmware is still executing an FLR flow and did not finish yet so the driver needs to wait for that to finish. Fixes: e3297246c2c8 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2017-06-1582-316/+544
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) The netlink attribute passed in to dev_set_alias() is not necessarily NULL terminated, don't use strlcpy() on it. From Alexander Potapenko. 2) Fix implementation of atomics in arm64 bpf JIT, from Daniel Borkmann. 3) Correct the release of netdevs and driver private data in certain circumstances. 4) Sanitize netlink message length properly in decnet, from Mateusz Jurczyk. 5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From Yuval Mintz. 6) Hash secret is never initialized in ipv6 ILA translation code, from Arnd Bergmann. I guess those clang warnings about unused inline functions are useful for something! 7) Fix endian selection in bpf_endian.h, from Daniel Borkmann. 8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX and CAIF. From Mateusz Jurczyk. 9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario Molitor. 10) Do not leak netdev on dev_alloc_name() errors in mac80211, from Johannes Berg. 11) Fix locking in sctp_for_each_endpoint(), from Xin Long. 12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle. 13) Fix use after free in ip_mc_clear_src(), from WANG Cong. 14) Fix regressions caused by ICMP rate limiting changes in 4.11, from Jesper Dangaard Brouer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits) i40e: Fix a sleep-in-atomic bug net: don't global ICMP rate limit packets originating from loopback net/act_pedit: fix an error code net: update undefined ->ndo_change_mtu() comment net_sched: move tcf_lock down after gen_replace_estimator() caif: Add sockaddr length check before accessing sa_family in connect handler qed: fix dump of context data qmi_wwan: new Telewell and Sierra device IDs net: phy: Fix MDIO_THUNDER dependencies netconsole: Remove duplicate "netconsole: " logging prefix igmp: acquire pmc lock for ip_mc_clear_src() r8152: give the device version net: rps: fix uninitialized symbol warning mac80211: don't send SMPS action frame in AP mode when not needed mac80211/wpa: use constant time memory comparison for MACs mac80211: set bss_info data before configuring the channel mac80211: remove 5/10 MHz rate code from station MLME mac80211: Fix incorrect condition when checking rx timestamp mac80211: don't look at the PM bit of BAR frames i40e: fix handling of HW ATR eviction ...
| * i40e: Fix a sleep-in-atomic bugJia-Ju Bai2017-06-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver may sleep under a spin lock, and the function call path is: i40e_ndo_set_vf_port_vlan (acquire the lock by spin_lock_bh) i40e_vsi_remove_pvid i40e_vlan_stripping_disable i40e_aq_update_vsi_params i40e_asq_send_command mutex_lock --> may sleep To fixed it, the spin lock is released before "i40e_vsi_remove_pvid", and the lock is acquired again after this function. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qed: fix dump of context dataTayar, Tomer2017-06-131-1/+1
| | | | | | | | | | | | | | | | | | | | Currently when dumping a context data only word number '1' is read for the entire context. Fixes: c965db444629 ("qed: Add support for debug data collection") Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * qmi_wwan: new Telewell and Sierra device IDsBjørn Mork2017-06-131-0/+4
| | | | | | | | | | | | | | | | | | | | | | A new Sierra Wireless EM7305 device ID used in a Toshiba laptop, and two Longcheer device IDs entries used by Telewell TW-3G HSPA+ branded modems. Reported-by: Petr Kloc <petr_kloc@yahoo.com> Reported-by: Teemu Likonen <tlikonen@iki.fi> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: phy: Fix MDIO_THUNDER dependenciesFlorian Fainelli2017-06-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") we could create a configuration where MDIO_DEVICE=y and PHYLIB=m which leads to the following undefined references: drivers/built-in.o: In function `thunder_mdiobus_pci_remove': >> mdio-thunder.c:(.text+0x2a212f): undefined reference to >> `mdiobus_unregister' >> mdio-thunder.c:(.text+0x2a2138): undefined reference to >> `mdiobus_free' drivers/built-in.o: In function `thunder_mdiobus_pci_probe': mdio-thunder.c:(.text+0x2a22e7): undefined reference to `devm_mdiobus_alloc_size' mdio-thunder.c:(.text+0x2a236f): undefined reference to `of_mdiobus_register' Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * netconsole: Remove duplicate "netconsole: " logging prefixJoe Perches2017-06-131-1/+1
| | | | | | | | | | | | | | It's already added by pr_fmt so remove the explicit use. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * r8152: give the device versionOliver Neukum2017-06-131-0/+2
| | | | | | | | | | | | | | Getting the device version out of the driver really aids debugging. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * i40e: fix handling of HW ATR evictionJacob Keller2017-06-134-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A recent commit to refactor the driver and remove the hw_disabled_flags field accidentally introduced two regressions. First, we overwrote pf->flags which removed various key flags including the MSI-X settings. Additionally, it was intended that we have now two flags, HW_ATR_EVICT_CAPABLE and HW_ATR_EVICT_ENABLED, but this was not done, and we accidentally were mis-using HW_ATR_EVICT_CAPABLE everywhere. This patch adds the missing piece, HW_ATR_EVICT_ENABLED, and safely updates pf->flags instead of overwriting it. Without this patch we will have many problems including disabling MSI-X support, and we'll attempt to use HW ATR eviction on devices which do not support it. Fixes: 47994c119a36 ("i40e: remove hw_disabled_flags in favor of using separate flag bits", 2017-04-19) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'mlx5-fixes-2017-06-11' of ↵David S. Miller2017-06-116-40/+43
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox mlx5 fixes 2017-06-11 This series contains some fixes for the mlx5 core and netdev driver. Please pull and let me know if there's any problem. For -stable: ("net/mlx5e: Added BW check for DIM decision mechanism") kernels >= 4.9 ("net/mlx5e: Fix wrong indications in DIM due to counter wraparound") kernels >= 4.9 ("net/mlx5: Remove several module events out of ethtool stats") kernels >= 4.10 ("net/mlx5: Enable 4K UAR only when page size is bigger than 4K") kernels >= 4.11 *all patches apply with no issue on their -stable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * net/mlx5: Enable 4K UAR only when page size is bigger than 4KMajd Dibbiny2017-06-111-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the page size isn't bigger than 4K, there is no added value of enabling 4K UAR feature in the Firmware. Modified the condition of enabling the 4K UAR accordingly. Fixes: f502d834950a ("net/mlx5: Activate support for 4K UARs") Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Fix wrong indications in DIM due to counter wraparoundTal Gilboa2017-06-112-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for changing the channel interrupt moderation values in order to reduce CPU overhead for all traffic types. Each iteration of the algorithm, DIM calculates the difference in throughput, packet rate and interrupt rate from last iteration in order to make a decision. DIM relies on counters for each metric. When these counters get to their type's max value they wraparound. In this case the delta between 'end' and 'start' samples is negative and when translated to unsigned integers - very high. This results in a false indication to the algorithm and might result in a wrong decision. The fix calculates the 'distance' between 'end' and 'start' samples in a cyclic way around the relevant type's max value. It can also be viewed as an absolute value around the type's max value instead of around 0. Testing show higher stability in DIM profile selection and no wraparound issues. Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5e: Added BW check for DIM decision mechanismTal Gilboa2017-06-112-17/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for changing the channel interrupt moderation values in order to reduce CPU overhead for all traffic types. Until now only interrupt and packet rate were sampled. We found a scenario on which we get a false indication since a change in DIM caused more aggregation and reduced packet rate while increasing BW. We now regard a change as succesfull iff: current_BW > (prev_BW + threshold) or current_BW ~= prev_BW and current_PR > (prev_PR + threshold) or current_BW ~= prev_BW and current_PR ~= prev_PR and current_IR < (prev_IR - threshold) Where BW = Bandwidth, PR = Packet rate and IR = Interrupt rate Improvements (ConnectX-4Lx 25GbE, single RX queue, LRO off) -------------------------------------------------- packet size | before[Mb/s] | after[Mb/s] | gain | 2B | 343.4 | 359.4 | 4.5% | 16B | 2739.7 | 2814.8 | 2.7% | 64B | 9739 | 10185.3 | 4.5% | Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Tal Gilboa <talgi@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Remove several module events out of ethtool statsHuy Nguyen2017-06-111-9/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the following module event counters out of ethtool stats. The reason for removing these event counters is that these events do not occur without techinician's intervention. module_pwr_budget_exd module_long_range module_no_eeprom module_enforce_part module_unknown_id module_unknown_status module_plug Fixes: bedb7c909c19 ("net/mlx5e: Add port module event counters to ethtool stats") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Continue health polling until it is explicitly stoppedMohamad Haj Yahia2017-06-111-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The issue is that when we get an assert we will stop polling the health and thus we cant enter error state when we have a real health issue. Fixes: fd76ee4da55a ('net/mlx5_core: Fix internal error detection conditions') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| | * net/mlx5: Fix create vport flow table flowMohamad Haj Yahia2017-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Send vport number to the create flow table inner method instead of ignoring the vport argument and sending always 0. Fixes: b3ba51498bdd ('net/mlx5: Refactor create flow table method to accept underlay QP') Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
| * | net: ena: update ena driver to version 1.1.7Netanel Belgazal2017-06-111-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ena: bug fix in lost tx packets detection mechanismNetanel Belgazal2017-06-113-31/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | check_for_missing_tx_completions() is called from a timer task and looking for lost tx packets. The old implementation accumulate all the lost tx packets and did not check if those packets were retrieved on a later stage. This cause to a situation where the driver reset the device for no reason. Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ena: disable admin msix while working in polling modeNetanel Belgazal2017-06-111-0/+8
| | | | | | | | | | | | | | | | | | Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ena: fix theoretical Rx hang on low memory systemsNetanel Belgazal2017-06-113-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the rare case where the device runs out of free rx buffer descriptors (in case of pressure on kernel memory), and the napi handler continuously fail to refill new Rx descriptors until device rx queue totally runs out of all free rx buffers to post incoming packet, leading to a deadlock: * The device won't send interrupts since all the new Rx packets will be dropped. * The napi handler won't try to allocate new Rx descriptors since allocation is part of NAPI that's not being invoked any more The fix involves detecting this scenario and rescheduling NAPI (to refill buffers) by the keepalive/watchdog task. Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ena: add missing unmap bars on device removalNetanel Belgazal2017-06-111-4/+11
| | | | | | | | | | | | | | | | | | | | | | | | This patch also change the mapping functions to devm_ functions Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ena: fix race condition between submit and completion admin commandNetanel Belgazal2017-06-111-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bug: "Completion context is occupied" error printout will be noticed in dmesg. This error will cause the admin command to fail, which will lead to an ena_probe() failure or a watchdog reset (depends on which admin command failed). Root cause: __ena_com_submit_admin_cmd() is the function that submits new entries to the admin queue. The function have a check that makes sure the queue is not full and the function does not override any outstanding command. It uses head and tail indexes for this check. The head is increased by ena_com_handle_admin_completion() which runs from interrupt context, and the tail index is increased by the submit function (the function is running under ->q_lock, so there is no risk of multithread increment). Each command is associated with a completion context. This context allocated before call to __ena_com_submit_admin_cmd() and freed by ena_com_wait_and_process_admin_cq_interrupts(), right after the command was completed. This can lead to a state where the head was increased, the check passed, but the completion context is still in use. Solution: Use the atomic variable ->outstanding_cmds instead of using the head and the tail indexes. This variable is safe for use since it is bumped in get_comp_ctx() in __ena_com_submit_admin_cmd() and is freed by comp_ctxt_release() Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ena: add missing return when ena_com_get_io_handlers() failsNetanel Belgazal2017-06-111-0/+2
| | | | | | | | | | | | | | | | | | Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ena: fix bug that might cause hang after consecutive open/close interface.Netanel Belgazal2017-06-111-15/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixing a bug that the driver does not unmask the IO interrupts in ndo_open(): occasionally, the MSI-X interrupt (for one or more IO queues) can be masked when ndo_close() was called. If that is followed by ndo open(), then the MSI-X will be still masked so no interrupt will be received by the driver. Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: ena: fix rare uncompleted admin command false alarmNetanel Belgazal2017-06-111-10/+11
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current flow to detect admin completion is: while (command_not_completed) { if (timeout) error check_for_completion() sleep() } So in case the sleep took more than the timeout (in case the thread/workqueue was not scheduled due to higher priority task or prolonged VMexit), the driver can detect a stall even if the completion is present. The fix changes the order of this function to first check for completion and only after that check if the timeout expired. Fixes: 1738cd3ed342 ("Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Netanel Belgazal <netanel@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mvpp2: use {get, put}_cpu() instead of smp_processor_id()Thomas Petazzoni2017-06-111-8/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | smp_processor_id() should not be used in migration-enabled contexts. We originally thought it was OK in the specific situation of this driver, but it was wrong, and calling smp_processor_id() in a migration-enabled context prints a big fat warning when CONFIG_DEBUG_PREEMPT=y. Therefore, this commit replaces the smp_processor_id() in migration-enabled contexts by the appropriate get_cpu/put_cpu sections. Reported-by: Marc Zyngier <marc.zyngier@arm.com> Fixes: a786841df72e ("net: mvpp2: handle register mapping and access for PPv2.2") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Tested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: mvpp2: remove mvpp2_bm_cookie_{build,pool_get}Thomas Petazzoni2017-06-111-33/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit removes the useless remove mvpp2_bm_cookie_{build,pool_get} functions. All what mvpp2_bm_cookie_build() was doing is compute a 32-bit value by concatenating the pool number and the CPU number... only to get the pool number re-extracted by mvpp2_bm_cookie_pool_get() later on. Instead, just get the pool number directly from RX descriptor status, and pass it to mvpp2_pool_refill() and mvpp2_rx_refill(). This has the added benefit of dropping a smp_processor_id() call in a migration-enabled context, which is wrong, and is the original motivation for making this change. Fixes: 3f518509dedc9 ("ethernet: Add new driver for Marvell Armada 375 network unit") Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Revert "net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272"David S. Miller2017-06-101-4/+0
| | | | | | | | | | | | | | | | This reverts commit bf292f1b2c813f1d6ac49b04bd1a9863d8314266. It belongs in 'net-next' not 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: fec: Add a fec_enet_clear_ethtool_stats() stub for CONFIG_M5272Fabio Estevam2017-06-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 2b30842b23b9 ("net: fec: Clear and enable MIB counters on imx51") introduced fec_enet_clear_ethtool_stats(), but missed to add a stub for the CONFIG_M5272=y case, causing build failure for the m5272c3_defconfig. Add the missing empty stub to fix the build failure. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: aquantia: atlantic: remove declaration of hw_atl_utils_hw_set_powerPhilippe Reynes2017-06-101-3/+0
| | | | | | | | | | | | | | | | | | | | This function is not defined, so no need to declare it. As I don't have the hardware, I'd be very pleased if someone may test this patch. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Don't post statistics to malicious VFsMintz, Yuval2017-06-102-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Once firmware indicates that a given VF is malicious and until that VF passes an FLR all bets are off - PF can't know anything is happening to the VF [since VF can't communicate anything to its PF]. But PF is currently still periodically asking device to collect statistics for the VF which might in turn fill logs by IOMMU blocking memory access done by the VF's PCI function [in the case VF has unmapped its buffers]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bnx2x: Allow vfs to disable txvlan offloadMintz, Yuval2017-06-101-4/+15
| | | | | | | | | | | | | | | | | | | | | | VF clients are configured as enforced, meaning firmware is validating the correctness of their ethertype/vid during transmission. Once txvlan is disabled, VF would start getting SKBs for transmission here vlan is on the payload - but it'll pass the packet's ethertype instead of the vid, leading to firmware declaring it as malicious. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * Merge tag 'linux-can-fixes-for-4.12-20170609' of ↵David S. Miller2017-06-096-6/+9
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2017-06-09 this is a pull request of 6 patches for net/master. There's a patch by Stephane Grosjean that fixes an uninitialized symbol warning in the peak_canfd driver. A patch by Johan Hovold to fix the product-id endianness in an error message in the the peak_usb driver. A patch by Oliver Hartkopp to enable CAN FD for virtual CAN devices by default. Three patches by me, one makes the helper function can_change_state() robust to be called with cf == NULL. The next patch fixes a memory leak in the gs_usb driver. And the last one fixes a lockdep splat by properly initialize the per-net can_rcvlists_lock spin_lock. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * can: enable CAN FD for virtual CAN devices by defaultOliver Hartkopp2017-06-092-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CAN FD capable CAN interfaces can handle (classic) CAN 2.0 frames too. New users usually fail at their first attempt to explore CAN FD on virtual CAN interfaces due to the current CAN_MTU default. Set the MTU to CANFD_MTU by default to reduce this confusion. If someone *really* needs a 'classic CAN'-only device this can be set with the 'ip' tool with e.g. 'ip link set vcan0 mtu 16' as before. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * can: gs_usb: fix memory leak in gs_cmd_reset()Marc Kleine-Budde2017-06-091-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the missing kfree() in gs_cmd_reset() to free the memory that is not used anymore after usb_control_msg(). Cc: linux-stable <stable@vger.kernel.org> Cc: Maximilian Schneider <max@schneidersoft.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * can: peak_usb: fix product-id endianness in error messageJohan Hovold2017-06-091-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure to use the USB device product-id stored in host-byte order in a probe error message. Also remove a redundant reassignment of the local usb_dev variable which had already been used to retrieve the product id. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * can: peak_canfd: fix uninitialized symbol warningsStephane Grosjean2017-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes two uninitialized symbol warnings in the new code adding support of the PEAK-System PCAN-PCI Express FD boards, in the socket-CAN network protocol family. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * can: dev: make can_change_state() robust to be called with cf == NULLMarc Kleine-Budde2017-06-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In OOM situations where no skb can be allocated, can_change_state() may be called with cf == NULL. As this function updates the state and error statistics it's not an option to skip the call to can_change_state() in OOM situations. This patch makes can_change_state() robust, so that it can be called with cf == NULL. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | stmmac: fix for hw timestamp of GMAC3 unitMario Molitor2017-06-092-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1.) Bugfix of function stmmac_get_tx_hwtstamp. Corrected the tx timestamp available check (same as 4.8 and older) Change printout from info syslevel to debug. 2.) Bugfix of function stmmac_get_rx_hwtstamp. Corrected the rx timestamp available check (same as 4.8 and older) Change printout from info syslevel to debug. Fixes: ba1ffd74df74 ("stmmac: fix PTP support for GMAC4") Signed-off-by: Mario Molitor <mario_molitor@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | stmmac: fix ptp header for GMAC3 hw timestampMario Molitor2017-06-092-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According the CYCLON V documention only the bit 16 of snaptypesel should set. (more information see Table 17-20 (cv_5v4.pdf) : Timestamp Snapshot Dependency on Register Bits) Fixes: d2042052a0aa ("stmmac: update the PTP header file") Signed-off-by: Mario Molitor <mario_molitor@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | net: phy: add missing SPEED_14000Joe Perches2017-06-091-0/+2
| |/ | | | | | | | | | | | | Fixes: 0d7e2d2166f6 ("IB/ipoib: add get_link_ksettings in ethtool") Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: vrf: Make add_fib_rules per network namespace flagDavid Ahern2017-06-091-4/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") adds the l3mdev FIB rule the first time a VRF device is created. However, it only creates the rule once and only in the namespace the first device is created - which may not be init_net. Fix by using the net_generic capability to make the add_fib_rules flag per network namespace. Fixes: 1aa6c4f6b8cd8 ("net: vrf: Add l3mdev rules on first device create") Reported-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: fix 802.3ad support for 14G speedNicolas Dichtel2017-06-081-0/+9
| | | | | | | | | | | | | | | | | | | | This patch adds 14 Gbps enum definition, and fixes aggregated bandwidth calculation based on above slave links. Fixes: 0d7e2d2166f6 ("IB/ipoib: add get_link_ksettings in ethtool") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * bonding: fix 802.3ad support for 5G and 50G speedsThibaut Collet2017-06-081-0/+18
| | | | | | | | | | | | | | | | | | | | | | This patch adds [5|50] Gbps enum definition, and fixes aggregated bandwidth calculation based on above slave links. Fixes: c9a70d43461d ("net-next: ethtool: Added port speed macros.") Signed-off-by: Thibaut Collet <thibaut.collet@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: Fix build regression in rtl8723bs staging driver.David S. Miller2017-06-082-3/+2
| | | | | | | | | | | | | | | | | | drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c: In function ‘rtw_cfg80211_add_monitor_if’: drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2670:10: error: ‘struct net_device’ has no member named ‘destructor’ mon_ndev->destructor = rtw_ndev_destructor; ^ Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-09 08:21:39 +0100