summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* iscsi-target: Convert iscsi_session statistics to atomic_long_tNicholas Bellinger2013-11-206-50/+25
| | | | | | | | | | | | | | | This patch converts a handful of iscsi_session statistics to type atomic_long_t, instead of using iscsi_session->session_stats_lock when incrementing these values. More importantly, go ahead and drop the spinlock usage within iscsit_setup_scsi_cmd(), iscsit_check_dataout_hdr(), iscsit_send_datain(), and iscsit_build_rsp_pdu() fast-path code. (Squash in Roland's target: Remove write-only stats fields and lock from struct se_node_acl) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Convert se_device statistics to atomic_long_tNicholas Bellinger2013-11-143-16/+13
| | | | | | | | | | | This patch converts the handful of se_device statistics to type atomic_long_t, instead of using se_device->stats_lock when incrementing these values. More importantly, go ahead and drop the spinlock usage within transport_lookup_cmd_lun() fast-path code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Fix delayed Task Aborted Status (TAS) handling bugNicholas Bellinger2013-11-131-0/+2
| | | | | | | | | | | | | | | | This patch fixes a bug in delayed Task Aborted Status (TAS) handling, where transport_send_task_abort() was not returning for the case when the se_tfo->write_pending() callback indicated that last fabric specific WRITE PDU had not yet been received. It also adds an explicit cmd->scsi_status = SAM_STAT_TASK_ABORTED assignment within transport_check_aborted_status() to avoid the case where se_tfo->queue_status() is called when the SAM_STAT_TASK_ABORTED assignment + ->queue_status() in transport_send_task_abort() does not occur once SCF_SENT_DELAYED_TAS has been set. Cc: <stable@vger.kernel.org> #3.2+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* iscsi-target: Reject unsupported multi PDU text command sequenceNicholas Bellinger2013-11-131-0/+7
| | | | | | | | | | | | | This patch adds a check to reject text commands with F_BIT=0 || C_BIT=1, as multi PDU text command sequences are currently unsupported. This avoids the case where a text command received with F_BIT=0, was generating a text response with F_BIT=1 which is a protocol error according to RFC-3720 Section 10.11.1. Reported-by: Arshad Hussain <arshad.hussain@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* ib_isert: Avoid duplicate iscsit_increment_maxcmdsn callNicholas Bellinger2013-11-131-5/+1
| | | | | | | | | | | | | | | This patch avoids a duplicate iscsit_increment_maxcmdsn() call for ISER_IB_RDMA_WRITE within isert_map_rdma() + isert_reg_rdma_frwr(), which will already be occuring once during isert_put_datain() -> iscsit_build_rsp_pdu() operation. It also removes the local conn->stat_sn assignment + increment, and changes the third parameter to iscsit_build_rsp_pdu() to signal this should be done by iscsi_target_mode code. Tested-by: Moussa Ba <moussaba@micron.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* iscsi-target: Fix mutex_trylock usage in iscsit_increment_maxcmdsnNicholas Bellinger2013-11-132-5/+6
| | | | | | | | | | | | | | | | | | | | | | | This patch fixes a >= v3.10 regression bug with mutex_trylock() usage within iscsit_increment_maxcmdsn(), that was originally added to allow for a special case where ->cmdsn_mutex was already held from the iscsit_execute_cmd() exception path for ib_isert. When !mutex_trylock() was occuring under contention during normal RX/TX process context codepaths, the bug was manifesting itself as the following protocol error: Received CmdSN: 0x000fcbb7 is greater than MaxCmdSN: 0x000fcbb6, protocol error. Received CmdSN: 0x000fcbb8 is greater than MaxCmdSN: 0x000fcbb6, protocol error. This patch simply avoids the direct ib_isert callback in lio_queue_status() for the special iscsi_execute_cmd() exception cases, that allows the problematic mutex_trylock() usage in iscsit_increment_maxcmdsn() to go away. Reported-by: Moussa Ba <moussaba@micron.com> Tested-by: Moussa Ba <moussaba@micron.com> Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Core does not need blkdev.hAndy Grover2013-11-123-3/+0
| | | | | | | | Target core does not depend on the block layer, only backstores that use the block layer do. Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Pass through I/O topology for block backstoresAndy Grover2013-11-123-3/+63
| | | | | | | | | | | | | | | | | In addition to block size (already implemented), passing through alignment offset, logical-to-phys block exponent, I/O granularity and optimal I/O length will allow initiators to properly handle layout on LUNs with 4K block sizes. Tested with various weird values via scsi_debug module. One thing to look at with this patch is the new block limits values -- instead of granularity 1 optimal 8192, Lio will now be returning whatever the block device says, which may affect performance. Signed-off-by: Andy Grover <agrover@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* iser-target: Avoid using FRMR for single dma entry requestsVu Pham2013-11-121-12/+20
| | | | | | | | | | | | | This patch changes isert_reg_rdma_frwr() to not use FRMR for single dma entry requests from small I/Os, in order to avoid the associated memory registration overhead. Using DMA MR is sufficient here for the single dma entry requests, and addresses a >= v3.12 performance regression. Signed-off-by: Vu Pham <vu@mellanox.com> Cc: <stable@vger.kernel.org> # v3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Add per device xcopy_lun for copy offload I/ONicholas Bellinger2013-11-082-17/+10
| | | | | | | | | | | This patch adds a se_device->xcopy_lun that is used for local copy offload I/O, instead of allocating + initializing a pseudo se_lun for each received EXTENDED_COPY operation. Also, move declaration of struct se_lun + struct se_port_stat_grps ahead of struct se_device. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Drop left-over se_lun->lun_cmd_list shutdown codeNicholas Bellinger2013-11-074-242/+4
| | | | | | | | | | | | Now with percpu refcounting for se_lun in place, go ahead and drop the legacy per se_cmd accounting for se_lun shutdown. This includes __transport_clear_lun_from_sessions(), the associated transport_lun_wait_for_tasks() logic, along with a handful of now unused se_cmd structure members and ->transport_state bits. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Add percpu refcounting for se_lun accessNicholas Bellinger2013-11-075-18/+40
| | | | | | | | | | | | | | | | This patch adds percpu refcounting for se_lun access that allows the association of an se_lun + se_cmd in transport_lookup_cmd_lun() to occur without an extra list_head for tracking outstanding I/O during se_lun shutdown. This effectively changes se_lun shutdown logic to wait for outstanding I/O percpu references to complete in transport_lun_remove_cmd() using se_lun->lun_ref_comp, instead of explicitly draining the per se_lun command list and waiting for individual se_cmd descriptor processing to complete. Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* iscsi-target: Do not generate REJECTs for zero-length DataOUTNicholas Bellinger2013-11-071-4/+3
| | | | | | | | | | | | | | | This patch changes iscsit_check_dataout_hdr() to no longer generate REJECTs for zero-length DataOUTs, and instead simply ignore these requests. This follows RFC-3720, Section 10.7.7. DataSegmentLength "This is the data payload length of a SCSI Data-In or SCSI Data-Out PDU. The sending of 0 length data segments should be avoided, but initiators and targets MUST be able to properly receive 0 length data segments." Reported-by: Santosh Kulkarni <santosh.kulkarni@calsoftinc.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* ib_isert: Add support for completion interrupt coalescingNicholas Bellinger2013-11-062-12/+57
| | | | | | | | | | | | | | | | | | | | | This patch adds support for completion interrupt coalescing that allows only every ISERT_COMP_BATCH_COUNT (8) to set IB_SEND_SIGNALED, thus avoiding completion interrupts for every posted iser_tx_desc. The batch processing is done using a per isert_conn llist that once IB_SEND_SIGNALED has been set is saved to tx_desc->comp_llnode_batch, and completion processing of previously posted iser_tx_descs is done in a single shot from within isert_send_completion() code. Note this is only done for response PDUs from ISCSI_OP_SCSI_CMD, and all other control type of PDU responses will force an implicit batch drain to occur. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Roland Dreier <roland@purestorage.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* iscsi-target: Implement demo_mode_discovery logicThomas Glanzmann2013-10-241-9/+30
| | | | | | | | If demo_mode_discovery=0 and generate_node_acls=0 (demo mode dislabed) do not return TargetName+TargetAddress unless a NodeACL exists. Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Export symbol core_tpg_check_initiator_node_aclThomas Glanzmann2013-10-242-2/+1
| | | | | | | | | Export symbol core_tpg_check_initiator_node_acl and move prototype from the private drivers/target/target_core_internal.h to the public include/target/target_core_fabric.h Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* iscsi-target: Add new TPG attributeThomas Glanzmann2013-10-244-0/+29
| | | | | | | Add a new TPG attribute demo_mode_discovery which is enabled by default. Signed-off-by: Thomas Glanzmann <thomas@glanzmann.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* tcm_loop: Implement target resetHannes Reinecke2013-10-171-0/+26
| | | | | | | | | Implement target reset by resetting the transport status. (nab: Remove unused ret in tcm_loop_target_reset) Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* tcm_loop: TCQ and command abort supportHannes Reinecke2013-10-172-4/+69
| | | | | | | | Implement TCQ support, which enables us to do proper command abort, too. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* tcm_loop: separate out tcm_loop_issue_tmrHannes Reinecke2013-10-171-33/+50
| | | | | | | No functional change. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* tcm_loop: Implement transport offlineHannes Reinecke2013-10-172-1/+56
| | | | | | | Add attribute 'transport_status' to simulate link failure. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* tcm_loop: Check for valid hba in tcm_loop_drop_nexus()Hannes Reinecke2013-10-161-1/+4
| | | | | Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target/qla2xxx: Remove QLA_TPG_ATTRIB macroAndy Grover2013-10-162-12/+10
| | | | | | | | Just a dereference, don't need a macro. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target/iscsi: Remove macros that contain typecastsAndy Grover2013-10-166-22/+18
| | | | | | | | | | | These just want to return a pointer instead of a value, but are otherwise the same. ISCSI_TPG_LUN macro was unused. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target/iscsi: Remove iscsi dereferencing macrosAndy Grover2013-10-164-36/+27
| | | | | | | | These are all straightforward. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* target: Remove TF_CIT_TMPL macroAndy Grover2013-10-169-92/+92
| | | | | | | | Remove a lingering macro that just hid a dereference. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andy Grover <agrover@redhat.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* tcm_fc: Convert to per-cpu command map pre-allocation of ft_cmdNicholas Bellinger2013-10-023-5/+17
| | | | | | | | | | | | | | | | | | | | | | | This patch converts tcm_fc to use transport_init_session_tags() pre-allocation logic for struct ft_cmd descriptors using per-cpu session tag pooling in order to effectively avoid memory allocation + release for each received I/O. It adds percpu_ida_alloc() in ft_recv_cmd() to obtain an tag and locate ft_cmd from se_sess->sess_cmd_map[], and percpu_ida_free() in ft_free_cmd() to release the tag based upon se_cmd->map_tag id. It also uses a TCM_FC_DEFAULT_TAGS value of 512, that puts the per se_sess->sess_cmd_map allocation at ~360K on 64-bit. v2 changes: - Handle possible tag < 0 failure with GFP_ATOMIC Cc: Mark Rustad <mark.d.rustad@intel.com> Cc: Robert Love <robert.w.love@intel.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
* Merge tag 'usb-3.12-rc3' of ↵Linus Torvalds2013-09-2921-107/+201
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB driver fixes for 3.12-rc3. These are all for host controller issues that have been reported, and there's a fix for an annoying error message that gets printed every time you remove a USB 3 device from the system that's been bugging me for a while" * tag 'usb-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: add support for Merrifield USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitialization USB: Fix breakage in ffs_fs_mount() fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phy usb/core/devio.c: Don't reject control message to endpoint with wrong direction bit usb: chipidea: USB_CHIPIDEA should depend on HAS_DMA usb: chipidea: udc: free pending TD at removal procedure usb: chipidea: imx: Add usb_phy_shutdown at probe's error path usb: chipidea: Fix memleak for ci->hw_bank.regmap when removal usb: chipidea: udc: fix the oops after rmmod gadget USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcd USB: OHCI: accept very late isochronous URBs USB: UHCI: accept very late isochronous URBs USB: iMX21: accept very late isochronous URBs usbcore: check usb device's state before sending a Set SEL control transfer xhci: Fix race between ep halt and URB cancellation usb: Fix xHCI host issues on remote wakeup. xhci: Ensure a command structure points to the correct trb on the command ring xhci: Fix oops happening after address device timeout
| * usb: dwc3: add support for MerrifieldDavid Cohen2013-09-271-0/+2
| | | | | | | | | | | | | | | | Add PCI id for Intel Merrifield Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: fsl/ehci: fix failure of checking PHY_CLK_VALID during reinitializationShengzhou Liu2013-09-271-2/+3
| | | | | | | | | | | | | | | | | | | | | | In case of usb phy reinitialization: e.g. insmod usb-module(usb works well) -> rmmod usb-module -> insmod usb-module It found the PHY_CLK_VALID bit didn't work if it's not with the power-on reset. So we just check PHY_CLK_VALID bit during the stage with POR, this can be met by the tricky of checking FSL_SOC_USB_PRICTRL register. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: Fix breakage in ffs_fs_mount()Al Viro2013-09-271-34/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There's a bunch of failure exits in ffs_fs_mount() with seriously broken recovery logics. Most of that appears to stem from misunderstanding of the ->kill_sb() semantics; unlike ->put_super() it is called for *all* superblocks of given type, no matter how (in)complete the setup had been. ->put_super() is called only if ->s_root is not NULL; any failure prior to setting ->s_root will have the call of ->put_super() skipped. ->kill_sb(), OTOH, awaits every superblock that has come from sget(). Current behaviour of ffs_fs_mount(): We have struct ffs_sb_fill_data data on stack there. We do ffs_dev = functionfs_acquire_dev_callback(dev_name); and store that in data.private_data. Then we call mount_nodev(), passing it ffs_sb_fill() as a callback. That will either fail outright, or manage to call ffs_sb_fill(). There we allocate an instance of struct ffs_data, slap the value of ffs_dev (picked from data.private_data) into ffs->private_data and overwrite data.private_data by storing ffs into an overlapping member (data.ffs_data). Then we store ffs into sb->s_fs_info and attempt to set the rest of the things up (root inode, root dentry, then create /ep0 there). Any of those might fail. Should that happen, we get ffs_fs_kill_sb() called before mount_nodev() returns. If mount_nodev() fails for any reason whatsoever, we proceed to functionfs_release_dev_callback(data.ffs_data); That's broken in a lot of ways. Suppose the thing has failed in allocation of e.g. root inode or dentry. We have functionfs_release_dev_callback(ffs); ffs_data_put(ffs); done by ffs_fs_kill_sb() (ffs accessed via sb->s_fs_info), followed by functionfs_release_dev_callback(ffs); from ffs_fs_mount() (via data.ffs_data). Note that the second functionfs_release_dev_callback() has every chance to be done to freed memory. Suppose we fail *before* root inode allocation. What happens then? ffs_fs_kill_sb() doesn't do anything to ffs (it's either not called at all, or it doesn't have a pointer to ffs stored in sb->s_fs_info). And functionfs_release_dev_callback(data.ffs_data); is called by ffs_fs_mount(), but here we are in nasal daemon country - we are reading from a member of union we'd never stored into. In practice, we'll get what we used to store into the overlapping field, i.e. ffs_dev. And then we get screwed, since we treat it (struct gfs_ffs_obj * in disguise, returned by functionfs_acquire_dev_callback()) as struct ffs_data *, pick what would've been ffs_data ->private_data from it (*well* past the actual end of the struct gfs_ffs_obj - struct ffs_data is much bigger) and poke in whatever it points to. FWIW, there's a minor leak on top of all that in case if ffs_sb_fill() fails on kstrdup() - ffs is obviously forgotten. The thing is, there is no point in playing all those games with union. Just allocate and initialize ffs_data *before* calling mount_nodev() and pass a pointer to it via data.ffs_data. And once it's stored in sb->s_fs_info, clear data.ffs_data, so that ffs_fs_mount() knows that it doesn't need to kill the sucker manually - from that point on we'll have it done by ->kill_sb(). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Michal Nazarewicz <mina86@mina86.com> Cc: stable <stable@vger.kernel.org> # 3.3+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * fsl/usb: Resolve PHY_CLK_VLD instability issue for ULPI phyRamneek Mehresh2013-09-261-9/+3
| | | | | | | | | | | | | | | | | | | | | | For controller versions greater than 1.6, setting ULPI_PHY_CLK_SEL bit when USB_EN bit is already set causes instability issues with PHY_CLK_VLD bit. So USB_EN is set only for IP controller version below 1.6 before setting ULPI_PHY_CLK_SEL bit Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb/core/devio.c: Don't reject control message to endpoint with wrong ↵Kurt Garloff2013-09-261-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | direction bit Trying to read data from the Pegasus Technologies NoteTaker (0e20:0101) [1] with the Windows App (EasyNote) works natively but fails when Windows is running under KVM (and the USB device handed to KVM). The reason is a USB control message usb 4-2.2: control urb: bRequestType=22 bRequest=09 wValue=0200 wIndex=0001 wLength=0008 This goes to endpoint address 0x01 (wIndex); however, endpoint address 0x01 does not exist. There is an endpoint 0x81 though (same number, but other direction); the app may have meant that endpoint instead. The kernel thus rejects the IO and thus we see the failure. Apparently, Linux is more strict here than Windows ... we can't change the Win app easily, so that's a problem. It seems that the Win app/driver is buggy here and the driver does not behave fully according to the USB HID class spec that it claims to belong to. The device seems to happily deal with that though (and seems to not really care about this value much). So the question is whether the Linux kernel should filter here. Rejecting has the risk that somewhat non-compliant userspace apps/ drivers (most likely in a virtual machine) are prevented from working. Not rejecting has the risk of confusing an overly sensitive device with such a transfer. Given the fact that Windows does not filter it makes this risk rather small though. The patch makes the kernel more tolerant: If the endpoint address in wIndex does not exist, but an endpoint with toggled direction bit does, it will let the transfer through. (It does NOT change the message.) With attached patch, the app in Windows in KVM works. usb 4-2.2: check_ctrlrecip: process 13073 (qemu-kvm) requesting ep 01 but needs 81 I suspect this will mostly affect apps in virtual environments; as on Linux the apps would have been adapted to the stricter handling of the kernel. I have done that for mine[2]. [1] http://www.pegatech.com/ [2] https://sourceforge.net/projects/notetakerpen/ Signed-off-by: Kurt Garloff <kurt@garloff.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: USB_CHIPIDEA should depend on HAS_DMAGeert Uytterhoeven2013-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | If NO_DMA=y: drivers/built-in.o: In function `dma_set_coherent_mask': include/linux/dma-mapping.h:93: undefined reference to `dma_supported' Reviewed-and-tested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: udc: free pending TD at removal procedurePeter Chen2013-09-261-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a pending TD which is not freed after request finishes, we do this due to a controller bug. This TD needs to be freed when the driver is removed. It prints below error message when unload chipidea driver at current code: "ci_hdrc ci_hdrc.0: dma_pool_destroy ci_hw_td, b0001000 busy" It indicates the buffer at dma pool are still in use. This commit will free the pending TD at driver's removal procedure, it can fix the problem described above. Acked-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: imx: Add usb_phy_shutdown at probe's error pathPeter Chen2013-09-261-2/+5
| | | | | | | | | | | | | | | | | | If not, the PHY will be active even the controller is not in use. We find this issue due to the PHY's clock refcount is not correct due to -EPROBE_DEFER return after phy's init. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: Fix memleak for ci->hw_bank.regmap when removalPeter Chen2013-09-261-0/+1
| | | | | | | | | | | | | | | | It needs to free ci->hw_bank.regmap explicitly since it is not managed resource. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: chipidea: udc: fix the oops after rmmod gadgetPeter Chen2013-09-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we rmmod gadget, the ci->driver needs to be cleared. Otherwise, when we plug in usb cable again, the driver will consider gadget is there, and go to enumeration procedure, but in fact, it was removed. ci_hdrc ci_hdrc.0: Connected to host Unable to handle kernel paging request at virtual address 7f02a42c pgd = 80004000 [7f02a42c] *pgd=3f13d811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] SMP ARM Modules linked in: usb_f_acm u_serial libcomposite configfs [last unloaded: g_serial] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.10.0+ #42 task: 807dba88 ti: 807d0000 task.ti: 807d0000 PC is at udc_irq+0x8fc/0xea4 LR is at l2x0_cache_sync+0x5c/0x6c pc : [<803de7f4>] lr : [<8001d0f0>] psr: 20000193 sp : 807d1d98 ip : 807d1d80 fp : 807d1df4 r10: af809900 r9 : 808184d4 r8 : 00080001 r7 : 00082001 r6 : afb711f8 r5 : afb71010 r4 : ffffffea r3 : 7f02a41c r2 : afb71010 r1 : 807d1dc0 r0 : afb71068 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 3f01804a DAC: 00000017 Process swapper/0 (pid: 0, stack limit = 0x807d0238) Stack: (0x807d1d98 to 0x807d2000) 1d80: 00000000 afb71014 1da0: 000040f6 00000000 00000001 00000000 00007530 00000000 afb71010 001dcd65 1dc0: 01000680 00400000 807d1e2c afb71010 0000004e 00000000 00000000 0000004b 1de0: 808184d4 af809900 807d1e0c 807d1df8 803dbc24 803ddf04 afba75c0 0000004e 1e00: 807d1e44 807d1e10 8007a19c 803dbb9c 8108e7e0 8108e7e0 9ceddce0 af809900 1e20: 0000004e 807d0000 0000004b 00000000 00000010 00000000 807d1e5c 807d1e48 1e40: 8007a334 8007a154 af809900 0000004e 807d1e74 807d1e60 8007d3b4 8007a2f0 1e60: 0000004b 807cce3c 807d1e8c 807d1e78 80079b08 8007d300 00000180 807d8ba0 1e80: 807d1eb4 807d1e90 8000eef4 80079aec 00000000 f400010c 807d8ce4 807d1ed8 1ea0: f4000100 96d5c75d 807d1ed4 807d1eb8 80008600 8000eeac 8042699c 60000013 1ec0: ffffffff 807d1f0c 807d1f54 807d1ed8 8000e180 800085dc 807d1f20 00000046 1ee0: 9cedd275 00000010 8108f080 807de294 00000001 807de248 96d5c75d 00000010 1f00: 00000000 807d1f54 00000000 807d1f20 8005ff54 8042699c 60000013 ffffffff 1f20: 9cedd275 00000010 00000005 8108f080 8108f080 00000001 807de248 8086bd00 1f40: 807d0000 00000001 807d1f7c 807d1f58 80426af0 80426950 807d0000 00000000 1f60: 808184c0 808184c0 807d8954 805b886c 807d1f8c 807d1f80 8000f294 80426a44 1f80: 807d1fac 807d1f90 8005f110 8000f288 807d1fac 807d8908 805b4748 807dc86c 1fa0: 807d1fbc 807d1fb0 805aa58c 8005f068 807d1ff4 807d1fc0 8077c860 805aa530 1fc0: ffffffff ffffffff 8077c330 00000000 00000000 807bef88 00000000 10c53c7d 1fe0: 807d88d0 807bef84 00000000 807d1ff8 10008074 8077c594 00000000 00000000 Backtrace: [<803ddef8>] (udc_irq+0x0/0xea4) from [<803dbc24>] (ci_irq+0x94/0x14c) [<803dbb90>] (ci_irq+0x0/0x14c) from [<8007a19c>] (handle_irq_event_percpu+0x54/0x19c) r5:0000004e r4:afba75c0 [<8007a148>] (handle_irq_event_percpu+0x0/0x19c) from [<8007a334>] (handle_irq_event+0x50/0x70) [<8007a2e4>] (handle_irq_event+0x0/0x70) from [<8007d3b4>] (handle_fasteoi_irq+0xc0/0x16c) r5:0000004e r4:af809900 [<8007d2f4>] (handle_fasteoi_irq+0x0/0x16c) from [<80079b08>] (generic_handle_irq+0x28/0x38) r5:807cce3c r4:0000004b [<80079ae0>] (generic_handle_irq+0x0/0x38) from [<8000eef4>] (handle_IRQ+0x54/0xb4) r4:807d8ba0 r3:00000180 [<8000eea0>] (handle_IRQ+0x0/0xb4) from [<80008600>] (gic_handle_irq+0x30/0x64) r8:96d5c75d r7:f4000100 r6:807d1ed8 r5:807d8ce4 r4:f400010c r3:00000000 [<800085d0>] (gic_handle_irq+0x0/0x64) from [<8000e180>] (__irq_svc+0x40/0x54) Exception stack(0x807d1ed8 to 0x807d1f20) 1ec0: 807d1f20 00000046 1ee0: 9cedd275 00000010 8108f080 807de294 00000001 807de248 96d5c75d 00000010 1f00: 00000000 807d1f54 00000000 807d1f20 8005ff54 8042699c 60000013 ffffffff r7:807d1f0c r6:ffffffff r5:60000013 r4:8042699c [<80426944>] (cpuidle_enter_state+0x0/0xf4) from [<80426af0>] (cpuidle_idle_call+0xb8/0x174) r9:00000001 r8:807d0000 r7:8086bd00 r6:807de248 r5:00000001 r4:8108f080 [<80426a38>] (cpuidle_idle_call+0x0/0x174) from [<8000f294>] (arch_cpu_idle+0x18/0x5c) [<8000f27c>] (arch_cpu_idle+0x0/0x5c) from [<8005f110>] (cpu_startup_entry+0xb4/0x148) [<8005f05c>] (cpu_startup_entry+0x0/0x148) from [<805aa58c>] (rest_init+0x68/0x80) r7:807dc86c [<805aa524>] (rest_init+0x0/0x80) from [<8077c860>] (start_kernel+0x2d8/0x334) [<8077c588>] (start_kernel+0x0/0x334) from [<10008074>] (0x10008074) Code: e59031e0 e51b203c e24b1034 e2820058 (e5933010) ---[ end trace f874b2c5533c04bc ]--- Kernel panic - not syncing: Fatal exception in interrupt Tested-by: Marek Vasut <marex@denx.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: fix PM config symbol in uhci-hcd, ehci-hcd, and xhci-hcdAlan Stern2013-09-263-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since uhci-hcd, ehci-hcd, and xhci-hcd support runtime PM, the .pm field in their pci_driver structures should be protected by CONFIG_PM rather than CONFIG_PM_SLEEP. The corresponding change has already been made for ohci-hcd. Without this change, controllers won't do runtime suspend if system suspend or hibernation isn't enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: OHCI: accept very late isochronous URBsAlan Stern2013-09-262-14/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 24f531371de1 (USB: EHCI: accept very late isochronous URBs) changed the isochronous API provided by ehci-hcd. URBs submitted too late, so that the time slots for all their packets have already expired, are no longer rejected outright. Instead the submission is accepted, and the URB completes normally with a -EXDEV error for each packet. This is what client drivers expect. This patch implements the same policy in ohci-hcd. The change is more complicated than it was in ehci-hcd, because ohci-hcd doesn't scan for isochronous completions in the same way as ehci-hcd does. Rather, it depends on the hardware adding completed TDs to a "done queue". Some OHCI controller don't handle this properly when a TD's time slot has already expired, so we have to avoid adding such TDs to the schedule in the first place. As a result, if the URB was submitted too late then none of its TDs will get put on the schedule, so none of them will end up on the done queue, so the driver will never realize that the URB should be completed. To solve this problem, the patch adds one to urb_priv->td_cnt for such URBs, making it larger than urb_priv->length (td_cnt already gets set to the number of TD's that had to be skipped because their slots have expired). Each time an URB is given back, the finish_urb() routine looks to see if urb_priv->td_cnt for the next URB on the same endpoint is marked in this way. If so, it gives back the next URB right away. This should be applied to all kernels containing commit 815fa7b91761 (USB: OHCI: fix logic for scheduling isochronous URBs). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: UHCI: accept very late isochronous URBsAlan Stern2013-09-261-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 24f531371de1 (USB: EHCI: accept very late isochronous URBs) changed the isochronous API provided by ehci-hcd. URBs submitted too late, so that the time slots for all their packets have already expired, are no longer rejected outright. Instead the submission is accepted, and the URB completes normally with a -EXDEV error for each packet. This is what client drivers expect. This patch implements the same policy in uhci-hcd. It should be applied to all kernels containing commit c44b225077bb (UHCI: implement new semantics for URB_ISO_ASAP). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * USB: iMX21: accept very late isochronous URBsAlan Stern2013-09-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 24f531371de1 (USB: EHCI: accept very late isochronous URBs) changed the isochronous API provided by ehci-hcd. URBs submitted too late, so that the time slots for all their packets have already expired, are no longer rejected outright. Instead the submission is accepted, and the URB completes normally with a -EXDEV error for each packet. This is what client drivers expect. The same policy should be implemented in imx21-hcd, but I don't know enough about the hardware to do it. As a second-best substitute, this patch treats very late isochronous submissions as though the URB_ISO_ASAP flag were set. I don't have any way to test this change, unfortunately. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sascha Hauer <kernel@pengutronix.de> CC: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usbcore: check usb device's state before sending a Set SEL control transferXenia Ragiadakou2013-09-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | Set SEL control urbs cannot be sent to a device in unconfigured state. This patch adds a check in usb_req_set_sel() to ensure the usb device's state is USB_STATE_CONFIGURED. Signed-off-by: Xenia Ragiadakou <burzalodowa@gmail.com> Reported-by: Martin MOKREJS <mmokrejs@gmail.com> Suggested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * xhci: Fix race between ep halt and URB cancellationFlorian Wolter2013-09-241-2/+6
| | | | | | | | | | | | | | | | | | | | | | The halted state of a endpoint cannot be cleared over CLEAR_HALT from a user process, because the stopped_td variable was overwritten in the handle_stopped_endpoint() function. So the xhci_endpoint_reset() function will refuse the reset and communication with device can not run over this endpoint. https://bugzilla.kernel.org/show_bug.cgi?id=60699 Signed-off-by: Florian Wolter <wolly84@web.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * usb: Fix xHCI host issues on remote wakeup.Sarah Sharp2013-09-244-10/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a device signals remote wakeup on a roothub, and the suspend change bit is set, the host controller driver must not give control back to the USB core until the port goes back into the active state. EHCI accomplishes this by waiting in the get port status function until the PORT_RESUME bit is cleared: /* stop resume signaling */ temp &= ~(PORT_RWC_BITS | PORT_SUSPEND | PORT_RESUME); ehci_writel(ehci, temp, status_reg); clear_bit(wIndex, &ehci->resuming_ports); retval = ehci_handshake(ehci, status_reg, PORT_RESUME, 0, 2000 /* 2msec */); Similarly, the xHCI host should wait until the port goes into U0, before passing control up to the USB core. When the port transitions from the RExit state to U0, the xHCI driver will get a port status change event. We need to wait for that event before passing control up to the USB core. After the port transitions to the active state, the USB core should time a recovery interval before it talks to the device. The length of that recovery interval is TRSMRCY, 10 ms, mentioned in the USB 2.0 spec, section 7.1.7.7. The previous xHCI code (which did not wait for the port to go into U0) would cause the USB core to violate that recovery interval. This bug caused numerous USB device disconnects on remote wakeup under ChromeOS and a Lynx Point LP xHCI host that takes up to 20 ms to move from RExit to U0. ChromeOS is very aggressive about power savings, and sets the autosuspend_delay to 100 ms, and disables USB persist. I attempted to replicate this bug with Ubuntu 12.04, but could not. I used Ubuntu 12.04 on the same platform, with the same BIOS that the bug was triggered on ChromeOS with. I also changed the USB sysfs settings as described above, but still could not reproduce the bug under Ubuntu. It may be that ChromeOS userspace triggers this bug through additional settings. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
| * xhci: Ensure a command structure points to the correct trb on the command ringMathias Nyman2013-09-244-21/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a command on the command ring needs to be cancelled before it is handled it can be turned to a no-op operation when the ring is stopped. We want to store the command ring enqueue pointer in the command structure when the command in enqueued for the cancellation case. Some commands used to store the command ring dequeue pointers instead of enqueue (these often worked because enqueue happends to equal dequeue quite often) Other commands correctly used the enqueue pointer but did not check if it pointed to a valid trb or a link trb, this caused for example stop endpoint command to timeout in xhci_stop_device() in about 2% of suspend/resume cases. This should also solve some weird behavior happening in command cancellation cases. This patch is based on a patch submitted by Sarah Sharp to linux-usb, but then forgotten: http://marc.info/?l=linux-usb&m=136269803207465&w=2 This patch should be backported to kernels as old as 3.7, that contain the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting command ring function" Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
| * xhci: Fix oops happening after address device timeoutMathias Nyman2013-09-241-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a command times out, the command ring is first aborted, and then stopped. If the command ring is empty when it is stopped the stop event will point to next command which is not yet set. xHCI tries to handle this next event often causing an oops. Don't handle command completion events on stopped cmd ring if ring is empty. This patch should be backported to kernels as old as 3.7, that contain the commit b92cc66c047ff7cf587b318fe377061a353c120f "xHCI: add aborting command ring function" Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Reported-by: Giovanni <giovanni.nervi@yahoo.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
* | Merge tag 'tty-3.12-rc3' of ↵Linus Torvalds2013-09-294-13/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial fixes from Greg KH: "Here are some serial at tty driver fixes for 3.12-rc3 The serial driver fixes some kref leaks, documentation is moved to the proper places, and the tty and n_tty fixes resolve some reported regressions. There is still one outstanding tty regression fix that isn't in here yet, as I want to test it out some more, it will be sent for 3.12-rc4 if it checks out" * tag 'tty-3.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: ar933x_uart: move devicetree binding documentation tty: Fix SIGTTOU not sent with tcflush() n_tty: Fix EOF push index when termios changes serial: pch_uart: remove unnecessary tty_port_tty_get serial: pch_uart: fix tty-kref leak in dma-rx path serial: pch_uart: fix tty-kref leak in rx-error path serial: tegra: fix tty-kref leak
| * | tty: Fix SIGTTOU not sent with tcflush()Peter Hurley2013-09-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 'e7f3880cd9b98c5bf9391ae7acdec82b75403776' tty: Fix recursive deadlock in tty_perform_flush() introduced a regression where tcflush() does not generate SIGTTOU for background process groups. Make sure ioctl(TCFLSH) calls tty_check_change() when invoked from the line discipline. Cc: stable@vger.kernel.org # v3.10+ Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | n_tty: Fix EOF push index when termios changesPeter Hurley2013-09-171-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 40d5e0905a03601d40cd4e46b8690093c2355d03, 'n_tty: Fix EOF push handling' introduced a subtle state change error wrt EOF push handling when the termios is changed from non-canonical to canonical mode. Reset line_start to the current read_tail index, not 0. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 13:57:48 +0100