summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: ohci-da8xx can only be built-inArnd Bergmann2014-05-282-1/+11
| | | | | | | | | | | | | | | | | | The PHY setup code of the TI DaVinci DA8xx OHCI controller uses ad-hoc register access using a pointer that is meant to be used only by the DaVinci platform implementation and that is intentionally not exported to loadable modules. This results in a link error on configurations that use a modular OHCI code on this platform. While the proper solution for this problem would be to implement a real PHY driver shared by ohci-da8xx and musb-da8xx, this patch for now just works around the build error by only allowing the ohci-da8xx code to be built-in. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: xhci: avoid warning for !PM_SLEEPArnd Bergmann2014-05-281-1/+1
| | | | | | | | | | | | | If we build a kernel with PM_SUSPEND set and no PM_SLEEP, we get a build warning in the xhci-plat driver about unused functions. To fix this, use "#ifdef CONFIG_PM_SLEEP", like we do in most other drivers nowadays. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mathias Nyman <mathias.nyman@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: Add function to calculate correct FIFO sizesDinh Nguyen2014-05-281-0/+68
| | | | | | | | | | | | | | | | | The dwc2 IP on the SOCFPGA cannot use the default HW configured FIFO sizes. The total FIFO depth as read from GHWCFG3 reports 0x1f80 or 8064 32-bit words. But the GRXFSIZ, GNPTXFSIZ, and HPTXFSIZ register defaults to 0x2000 or 8192 32-bit words. So the driver cannot just use the fifo sizes as read from those registers. For platforms that face the same issue, this commits sets the RX, periodic TX, and non-periodic TX fifo size to those that are recommended v2.93a spec for the DWC2 IP. Implements Method #2 from the Synopsys v2.93a spec for the DWC2. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: Disable descriptor dma mode by defaultDinh Nguyen2014-05-281-0/+6
| | | | | | | | | | | | | Even though the IP supports Descriptor DMA mode, it does not support SPLIT transactions in this mode. So the driver, in its currently form, will not support LS/FS devices when connected to a HS Hub if Descriptor DMA mode is enabled. So we should just default to disable descriptor dma mode. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci-plat: add support for the Armada 375/38x XHCI controllersGregory CLEMENT2014-05-285-0/+116
| | | | | | | | | | | | | | | The Armada 375 and 38x SoCs come with an XHCI controller that requires some specific initialization related to the MBus windows configuration. This patch adds the support for this special configuration as an XHCI quirk executed during probe. Two new compatible strings are added to identify the Armada 375 and Armada 38x XHCI controllers, and therefore enable the relevant quirk. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci-plat: add clock supportGregory CLEMENT2014-05-282-1/+25
| | | | | | | | | | | | | | | | | | Some platforms (such as the Armada 38x ones) can gate the clock of their USB controller. This patch adds the support for one clock in xhci-plat, by enabling it during probe and disabling it on remove. To achieve this, it adds a 'struct clk *' member in xhci_hcd. While only used for now in xhci-plat, it might be used by other drivers in the future. Moreover, the xhci_hcd structure already holds other members such as msix_count and msix_entries, which are MSI-X specific, and therefore only used by xhci-pci. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: host: xhci-plat: sort the headers in alphabetic orderGregory CLEMENT2014-05-281-3/+3
| | | | | | | | | Sorting the headers in alphabetic order will help to reduce the conflict when adding new headers later. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ehci-orion: add optional PHY supportGregory CLEMENT2014-05-281-0/+28
| | | | | | | | | | | | | | | | This commit extends the ehci-orion so that it can optionally be passed a reference to a PHY through the Device Tree. It will be useful for the Armada 375 SoCs. If no PHY is provided then the behavior of the driver is unchanged. [Thomas: use devm_phy_optional_get() so that we handle -EPROBE_DEFER properly. Also call phy_power_off() when needed, and rename goto labels.] Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ehci-orion: fix clock reference leakingGregory CLEMENT2014-05-281-16/+29
| | | | | | | | | | | | | | | | | | | | | | | In order to disable the clock in the ->remove() function, a call to devm_clk_get() is being made, which further increases the reference count of the clock. In order to clean this up, a private structure holding a pointer to the clock is added using the override mechanism provided by the ehci framework. This makes the driver clock handling much more logical. The bug was introduced in v3.6, however the ehci framework allowing to use the override mechanism has only been introduced in v3.8, so this patch won't apply before it. [Thomas: reword commit log, fix goto label names.] Fixes: 8c869edaee07c623066266827371235fb9c12e01 ('ARM: Orion: EHCI: Add support for enabling clocks') Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ehci-orion: rename error goto labels in ehci_orion_drv_probe()Thomas Petazzoni2014-05-281-9/+9
| | | | | | | | | | In preparation to the introduction of additional initialization steps in ehci_orion_drv_probe(), we rename the error goto labels from err1, err2 and err3 names to some more meaningful names. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: ehci-orion: use platform_get_irq() for DT probingThomas Petazzoni2014-05-281-4/+1
| | | | | | | | | | | | | | | | | | Commit 77dae54ab385033e488d8b07045bc7f8d931740f ('ARM: Kirkwood: ehci-orion: Add device tree binding') added the Device Tree binding for the ehci-orion driver. To achieve that with the irq, it used the irq_of_parse_and_map() function when probed in DT-mode, and platform_get_irq() when probed in non-DT mode. This is not necessary: platform_get_irq() works just as fine in DT-mode, since the conversion from DT information to 'struct resource' is done by the generic layers of the kernel. Therefore, this commit switches back to use just platform_get_irq(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: common: rename phy-fsm-usb.c to usb-otg-fsm.cPeter Chen2014-05-285-10/+10
| | | | | | | | | | Since usb otg fsm implementation is not related to usb phy. We move it from usb/phy/ to usb/common/, and rename it to reflect its real meaning. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: move usb/usb-common.c to usb/common/usb-common.cPeter Chen2014-05-283-1/+6
| | | | | | | | | | Since we will have more usb-common things, and it will let usb-common.c be larger and larger, we create a folder named usb/common for all usb common things. Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: dwc2: Remove '0x' notation when using %pad formatFabio Estevam2014-05-281-2/+2
| | | | | | | | | %pad notation automatically prints in hexadecimal format (with '0x'), so remove the unneeded '0x' to avoid a '0x0x' string. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Paul Zimmerman <paulz@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Add support for using a MAX3421E chip as a host driver.David Mosberger2014-05-284-0/+1950
| | | | | Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uwb: fix variable set but not used warningsThomas Pugliese2014-05-283-7/+0
| | | | | | | Fix variable set but not used warnings in UWB. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uwb: comment typo fixThomas Pugliese2014-05-281-1/+1
| | | | | | | Comment typo fix. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* uwb: whitespace and line length cleanupsThomas Pugliese2014-05-281-128/+166
| | | | | | | Fix whitespace and line length issues reported by checkpatch. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: core: remove the Kconfig entry for USB_DEBUGPeter Chen2014-05-281-7/+0
| | | | | | | | Since we have already removed the usage of CONFIG_USB_DEBUG, it is meaningless that there is still a configuration entry for CONFIG_USB_DEBUG. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: remove redundant D0 power state setYijing Wang2014-05-281-1/+0
| | | | | | | | | Pci_enable_device() will set device power state to D0, so it's no need to do it again after call pci_enable_device(). Signed-off-by: Yijing Wang <wangyijing@huawei.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: keyspan: fix potential null pointer dereferenceRickard Strandqvist2014-05-281-2/+2
| | | | | | | | | | | | | | | Move control-urb dereference to after NULL-check. There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. [Johan: modify commit message somewhat ] [gkh: remove stable tag as it's not a real problem that anyone has ever hit] Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: wusbcore: fix control-pipe directionsJohan Hovold2014-05-281-2/+2
| | | | | | | | Fix incorrect pipe directions in control requests (which has been silently fixed up by USB core). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: use tty-port dtr_rtsJohan Hovold2014-05-281-12/+20
| | | | | | | | | | | Add dtr_rts tty-port operation which implements proper DTR/RTS handling (e.g. only lower DTR/RTS during shutdown if HUPCL is set). Note that modem-control locking still needs to be added throughout the driver. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: remove redundant usb_mark_last_busyJohan Hovold2014-05-281-1/+0
| | | | | | | | | There's no need to call usb_mark_last_busy after having increased the PM counter in write(). The device will be marked busy by USB core when the PM counter is balanced in the completion handler. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: do not update PM busy on read errorsJohan Hovold2014-05-281-1/+3
| | | | | | | | There's no need to update the runtime PM last_busy field on read urb errors (e.g. when the urb is being killed on shutdown). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: minimise no-suspend window during shutdownJohan Hovold2014-05-281-6/+11
| | | | | | | | | | | | Now that acm_set_control() handles runtime PM properly, the only remaining reason for the PM operations in shutdown is to clear the needs_remote_wakeup flag before the final put. Note that this also means that we now need to grab the write_lock to prevent racing with resume. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: remove redundant disconnected test from shutdownJohan Hovold2014-05-281-22/+19
| | | | | | | | Remove redundant disconnect test from shutdown(), which is never called post disconnect() where we do synchronous hangup. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: simplify runtime PM lockingJohan Hovold2014-05-281-11/+6
| | | | | | | | | | | We can simply the runtime PM locking as there's no need to check the susp_count in the read path (at least not since killing the rx tasklet). Specifically, the read urbs will never be resubmitted by the completion handler when killed during suspend. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix runtime PM imbalance at shutdownJohan Hovold2014-05-281-2/+4
| | | | | | | | | | | | | | Make sure only to decrement the PM counters if they were actually incremented. Note that the USB PM counter, but not necessarily the driver core PM counter, is reset when the interface is unbound. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix I/O after failed openJohan Hovold2014-05-281-0/+3
| | | | | | | | | Make sure to kill any already submitted read urbs on read-urb submission failures in open in order to prevent doing I/O for a closed port. Fixes: 088c64f81284 ("USB: cdc-acm: re-write read processing") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix failed open not being detectedJohan Hovold2014-05-281-6/+8
| | | | | | | | | | | | Fix errors during open not being returned to userspace. Specifically, failed control-line manipulations or control or read urb submissions would not be detected. Fixes: 7fb57a019f94 ("USB: cdc-acm: Fix potential deadlock (lockdep warning)") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix open and suspend raceJohan Hovold2014-05-281-4/+3
| | | | | | | | | We must not do the usb_autopm_put_interface() before submitting the read urbs or we might end up doing I/O to a suspended device. Fixes: 088c64f81284 ("USB: cdc-acm: re-write read processing") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix potential urb leak and PM imbalance in writeJohan Hovold2014-05-281-1/+7
| | | | | | | | | | | | Make sure to check return value of autopm get in write() in order to avoid urb leak and PM counter imbalance on errors. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: <stable@vger.kernel.org> # v2.6.27 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix shutdown and suspend raceJohan Hovold2014-05-281-2/+1
| | | | | | | | | | | | | We should stop I/O unconditionally at suspend rather than rely on the tty-port initialised flag (which is set prior to stopping I/O during shutdown) in order to prevent suspend returning with URBs still active. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: <stable@vger.kernel.org> # v2.6.27 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix runtime PM for control messagesJohan Hovold2014-05-281-1/+11
| | | | | | | | | | | | Fix runtime PM handling of control messages by adding the required PM counter operations. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: <stable@vger.kernel.org> # v2.6.27 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix broken runtime suspendJohan Hovold2014-05-282-11/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | The current ACM runtime-suspend implementation is broken in several ways: Firstly, it buffers only the first write request being made while suspended -- any further writes are silently dropped. Secondly, writes being dropped also leak write urbs, which are never reclaimed (until the device is unbound). Thirdly, even the single buffered write is not cleared at shutdown (which may happen before the device is resumed), something which can lead to another urb leak as well as a PM usage-counter leak. Fix this by implementing a delayed-write queue using urb anchors and making sure to discard the queue properly at shutdown. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Reported-by: Xiao Jin <jin.xiao@intel.com> Cc: <stable@vger.kernel.org> # v2.6.27 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix write and resume raceJohan Hovold2014-05-281-14/+9
| | | | | | | | | | | | | | | | | Fix race between write() and resume() due to improper locking that could lead to writes being reordered. Resume must be done atomically and susp_count be protected by the write_lock in order to prevent racing with write(). This could otherwise lead to writes being reordered if write() grabs the write_lock after susp_count is decremented, but before the delayed urb is submitted. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: <stable@vger.kernel.org> # v2.6.27 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: cdc-acm: fix write and suspend raceJohan Hovold2014-05-281-9/+6
| | | | | | | | | | | | | | | | | Fix race between write() and suspend() which could lead to writes being dropped (or I/O while suspended) if the device is runtime suspended while a write request is being processed. Specifically, suspend() releases the write_lock after determining the device is idle but before incrementing the susp_count, thus leaving a window where a concurrent write() can submit an urb. Fixes: 11ea859d64b6 ("USB: additional power savings for cdc-acm devices that support remote wakeup") Cc: <stable@vger.kernel.org> # v2.6.27 Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: kobil_sct: fix control requests without data stageJohan Hovold2014-05-281-11/+11
| | | | | | | | Fix incorrect pipe directions and remove bogus data buffer arguments from control requests without data stage. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: remove overly defensive port testsJohan Hovold2014-05-281-24/+14
| | | | | | | | | The only way a port pointer may be NULL is if probe() failed, and in that case neither disconnect(), resume(), or reset_resume() will be called. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: serial: fix potential runtime pm imbalance at device removeJohan Hovold2014-05-281-3/+11
| | | | | | | | | | | | | | | | | | | Only call usb_autopm_put_interface() if the corresponding usb_autopm_get_interface() was successful. This prevents a potential runtime PM counter imbalance should usb_autopm_get_interface() fail. Note that the USB PM usage counter is reset when the interface is unbound, but that the runtime PM counter may be left unbalanced. Also add comment on why we don't need to worry about racing resume/suspend on autopm_get failures. Fixes: d5fd650cfc7f ("usb: serial: prevent suspend/resume from racing against probe/remove") Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: do not resume I/O on closing portsJohan Hovold2014-05-282-5/+7
| | | | | | | | | | | | Use tty-port initialised flag rather than private flag to determine when port is closing down. Since the tty-port flag is set prior to dropping DTR/RTS (when HUPCL is set) this avoid submitting the read urbs when resuming the interface in dtr_rts() only to immediately kill them again in shutdown(). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: report failed submissions as errorsJohan Hovold2014-05-281-6/+7
| | | | | | | | Promote failed-submission messages in open() and write() to error log level. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: remove bogus function prototypeJohan Hovold2014-05-281-1/+0
| | | | | | | The usb_wwan_send_setup() function has never existed. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: remove some superfluous commentsJohan Hovold2014-05-281-7/+0
| | | | | | | Remove some more outdated or superfluous comments. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: remove comment from closeJohan Hovold2014-05-281-1/+0
| | | | | | | | | | | Remove superfluous and cryptic comment from close. It should be obvious that we're balancing the autopm_put in open (and that operation already mentions the autopm_get done in the USB serial core). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: clean up delayed-urb submissionJohan Hovold2014-05-281-5/+9
| | | | | | | | | | Clean up and rename delay-urb submission function using a more descriptive name. Also add comment on locking assumptions. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: use interface-data accessorsJohan Hovold2014-05-281-10/+10
| | | | | | | | Use usb_get_serial_data() rather than accessing the private pointer directly. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: make resume error messages uniformJohan Hovold2014-05-281-2/+3
| | | | | | | Make resume error messages uniform. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* USB: usb_wwan: kill interrupt urb explicitly at suspendJohan Hovold2014-05-281-2/+3
| | | | | | | | | As the port interrupt URB is submitted by the subdriver at open, we should also kill it explicitly at suspend (even though this will be taken care of by USB serial core otherwise). Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 20:08:57 +0100