summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* [SCSI] isci: change sas phy timeouts from 54us to 59usMarcin Tomczak2011-08-242-0/+25
| | | | | | | | | | | | | Need the following workaround in the driver for interoperability with the older Intel SSD drives and any other SATA drive that may exhibit the same behavior. This is a corner case where SCU speed is limited to either 3G or 1.5G and the drive has a period of DC idle when it switches speed during SATA speed negotiation. Workaround :change PHYTOV[31:24] from 0x36 to 0x3B. Signed-off-by: Marcin Tomczak <marcin.tomczak@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: fix 32-bit operation when CONFIG_HIGHMEM64G=nDan Williams2011-08-242-2/+2
| | | | | | | | | | | | | | | The unsolicited frame control infrastructure requires a table of dma addresses for the hardware to lookup the frame buffer location by an index. The hardware expects the elements of this table to be 64-bit quantities, so we cannot reference these elements as dma_addr_t. All unsolicited frame protocols are affected, particularly SATA-PIO and SMP which prevented direct-attached SATA drives and expander-attached drives to not be discovered. Cc: <stable@kernel.org> Reported-by: Jacek Danecki <jacek.danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] isci: fix sata response handlingDan Williams2011-08-241-12/+6
| | | | | | | | | | A bug (likely copy/paste) that has been carried from the original implementation. The unsolicited frame handling structure returns the d2h fis in the isci_request.stp.rsp buffer. Cc: <stable@kernel.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge git://git.infradead.org/users/cbou/battery-3.1Linus Torvalds2011-08-233-0/+3
|\ | | | | | | | | | | | | * git://git.infradead.org/users/cbou/battery-3.1: s3c-adc-battery: Fix compilation error due to missing header (module.h) max8997_charger: Needs module.h max8998_charger: Needs module.h
| * s3c-adc-battery: Fix compilation error due to missing header (module.h)Vasily Khoruzhick2011-08-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add linux/module.h to fix this compilation error: drivers/power/s3c_adc_battery.c:435:15: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:435:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:435:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_AUTHOR’ drivers/power/s3c_adc_battery.c:435:15: warning: function declaration isn’t a prototype drivers/power/s3c_adc_battery.c:436:20: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:436:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:436:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_DESCRIPTION’ drivers/power/s3c_adc_battery.c:436:20: warning: function declaration isn’t a prototype drivers/power/s3c_adc_battery.c:437:16: error: expected declaration specifiers or ‘...’ before string constant drivers/power/s3c_adc_battery.c:437:1: warning: data definition has no type or storage class drivers/power/s3c_adc_battery.c:437:1: warning: type defaults to ‘int’ in declaration of ‘MODULE_LICENSE’ drivers/power/s3c_adc_battery.c:437:16: warning: function declaration isn’t a prototype make[2]: *** [drivers/power/s3c_adc_battery.o] Error 1 Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Ian Lartey <ian@opensource.wolfsonmicro.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * max8997_charger: Needs module.hAxel Lin2011-08-191-0/+1
| | | | | | | | | | | | | | | | | | power/max8997_charger.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
| * max8998_charger: Needs module.hRandy Dunlap2011-08-191-0/+1
| | | | | | | | | | | | | | | | power/max8998_charger.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com>
* | drm/radeon: Extended DDC Probing for Toshiba L300D Radeon Mobility X1100 ↵Thomas Reim2011-08-231-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | HDMI-A Connector Toshiba Satellite L300D with ATI Mobility Radeon X1100 sends data to i2c bus for a HDMI connector that is not implemented/existent on the notebook's board. Fix by applying extented DDC probing for this connector. Requires [PATCH] drm/radeon: Extended DDC Probing for Connectors with Improperly Wired DDC Lines Tested for kernel 2.6.38 on Toshiba Satellite L300D notebook BugLink: http://bugs.launchpad.net/bugs/826677 Signed-off-by: Thomas Reim <reimth@gmail.com> Acked-by: Chris Routh <routhy@gmail.com> Cc: <stable@kernel.org> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/ttm: ensure ttm for new node is bound before calling move_notify()Ben Skeggs2011-08-231-4/+6
| | | | | | | | | | | | | | | | | | | | This was true for new TTM_PL_SYSTEM and new TTM_PL_TT cases, but wasn't the case on TTM_PL_SYSTEM<->TTM_PL_TT moves, which causes trouble on some paths as nouveau's move_notify() hook requires that the dma addresses be valid at this point. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/ttm: unbind ttm before destroying node in accel move cleanupBen Skeggs2011-08-231-1/+1
| | | | | | | | | | | | | | | | | | Nouveau makes the assumption that if a TTM is bound there will be a mm_node around for it and the backwards ordering here resulted in a use-after-free on some eviction paths. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/ttm: fix ttm_bo_add_ttm(user) failure pathMarcin Slusarz2011-08-231-1/+3
| | | | | | | | | | | | | | | | | | | | ttm_tt_destroy kfrees passed object, so we need to nullify a reference to it. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: stable@kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon: Make vramlimit parameter actually work.Michel Dänzer2011-08-221-0/+2
| | | | | | | | | | | | Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon: Explicitly print GTT/VRAM offsets on test failure.Michel Dänzer2011-08-221-6/+18
| | | | | | | | | | | | | | | | | | Otherwise these would need to be painstakingly calculated looking at the source code. Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon: Take IH ring into account for test size calculation.Michel Dänzer2011-08-221-3/+7
| | | | | | | | | | | | Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | drm/radeon/alpha: Add Alpha support to Radeon DRM codeJay Estabrook2011-08-221-0/+23
| | | | | | | | | | | | | | | | | | | | | | Alpha needs to have available the system bus address for the Radeon's local memory, so that it can be used in ttm_bo_vm_fault(), when building the PTEs for accessing that VRAM. So, we make bus.addr hold the ioremap() return, and then we can modify bus.base appropriately for use during page fault processing. Signed-off-by: Jay Estabrook <jay.estabrook@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* | Merge branch 'fixes' of ↵Linus Torvalds2011-08-221-5/+10
|\ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
| * | firewire: core: handle ack_busy when fetching the Config ROMStefan Richter2011-08-131-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some older Panasonic made camcorders (Panasonic AG-EZ30 and NV-DX110, Grundig Scenos DLC 2000) reject requests with ack_busy_X if a request is sent immediately after they sent a response to a prior transaction. This causes firewire-core to fail probing of the camcorder with "giving up on config rom for node id ...". Consequently, programs like kino or dvgrab are unaware of the presence of a camcorder. Such transaction failures happen also with the ieee1394 driver stack (of the 2.4...2.6 kernel series until 2.6.36 inclusive) but with a lower likelihood, such that kino or dvgrab are generally able to use these camcorders via the older driver stack. The cause for firewire-ohci's or firewire-core's worse behavior is not yet known. Gap count optimization in firewire-core is not the cause. Perhaps the slightly higher latency of transaction completion in the older stack plays a role. (ieee1394: AR-resp DMA context tasklet -> packet completion ktread -> user process; firewire-core: tasklet -> user process.) This change introduces retries and delays after ack_busy_X into firewire-core's Config ROM reader, such that at least firewire-core's probing and /dev/fw* creation are successful. This still leaves the problem that userland processes are facing transaction failures. gscanbus's built-in retry routines deal with them successfully, but neither kino's nor dvgrab's do ever succeed. But at least DV capture with "dvgrab -noavc -card 0" works now. Live video preview in kino works too, but not actual capture. One way to prevent Configuration ROM reading failures in application programs is to modify libraw1394 to synthesize read responses by means of firewire-core's Configuration ROM cache. This would only leave CMP and FCP transaction failures as a potential problem source for applications. Reported-and-tested-by: Thomas Seilund <tps@netmaster.dk> Reported-and-tested-by: René Fritz <rene@colorcube.de> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
* | | pci: fix new kernel-doc warning in pci.cRandy Dunlap2011-08-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix new kernel-doc warning in pci.c: Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps' Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'for-linus' of ↵Linus Torvalds2011-08-202-0/+8
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
| * | | drm/i915: set GFX_MODE to pre-Ivybridge default value even on IvybridgeJesse Barnes2011-08-192-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that MI_FLUSH would flush the TLBs in addition to the rest of the caches indicated in the MI_FLUSH command. However starting with Ivybridge, the register defaults to 0x2800 out of reset, meaning that to invalidate the TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go back to the old default so things work. v2: don't forget to actually *clear* the new bit Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | | Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2011-08-196-98/+235
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'for-linus' of git://git.kernel.dk/linux-block: (23 commits) Revert "cfq: Remove special treatment for metadata rqs." block: fix flush machinery for stacking drivers with differring flush flags block: improve rq_affinity placement blktrace: add FLUSH/FUA support Move some REQ flags to the common bio/request area allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH xen/blkback: Make description more obvious. cfq-iosched: Add documentation about idling block: Make rq_affinity = 1 work as expected block: swim3: fix unterminated of_device_id table block/genhd.c: remove useless cast in diskstats_show() drivers/cdrom/cdrom.c: relax check on dvd manufacturer value drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse bsg-lib: add module.h include cfq-iosched: Reduce linked group count upon group destruction blk-throttle: correctly determine sync bio loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices loop: add management interface for on-demand device allocation loop: replace linked list of allocated devices with an idr index ...
| * \ \ \ Merge branch 'stable/for-jens' of ↵Jens Axboe2011-08-092-4/+4
| |\ \ \ \ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus
| | * | | | xen/blkback: Make description more obvious.Konrad Rzeszutek Wilk2011-08-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the frontend having Xen but the backend not, it just looks odd: <*> Xen virtual block device support <*> Block-device backend driver Fix it to have the 'Xen' in front of it. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| | * | | | xen-blkfront: Fix one off warning about name clashStefan Bader2011-07-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoid telling users to use xvde and onwards when using xvde. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| | * | | | xen-blkfront: Drop name and minor adjustments for emulated scsi devicesStefan Bader2011-07-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These were intended to avoid the namespace clash when representing emulated IDE and SCSI devices. However that seems to confuse users more than expected (a disk defined as sda becomes xvde). So for now go back to the scheme which does no adjustments. This will break when mixing IDE and SCSI names in the configuration of guests but should be by now expected. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| * | | | | block: swim3: fix unterminated of_device_id tableAxel Lin2011-08-031-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | of_device_id structures need a NULL terminating entry, add it. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | | drivers/cdrom/cdrom.c: relax check on dvd manufacturer valueAndrew Morton2011-08-021-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The report has an ISO which has a very long manufacturer ID. It seems that Linux is wrong, not the ISO maker. Relax the check for the length of this field: emit a warning and truncate the incoming data to 2048 bytes rather than rejecting the entire thing. dvd_manufact.value isn't null-terminated. I'm not even sure if it's a string. The kernel doesn't apepar to use it anyway. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=39062 Reported-by: <ale.goujon@gmail.com> Tested-by: <ale.goujon@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | | drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parseH Hartley Sweeten2011-08-021-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The buffer 'sc.cpu_mask' is a kernel buffer. If bitmap_parse is used instead of __bitmap_parse the extra parameter that indicates a kernel buffer is not needed. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | | loop: fix deadlock when sysfs and LOOP_CLR_FD race against each otherKay Sievers2011-07-311-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LOOP_CLR_FD takes lo->lo_ctl_mutex and tries to remove the loop sysfs files. Sysfs calls show() and waits for lo->lo_ctl_mutex. LOOP_CLR_FD waits for show() to finish to remove the sysfs file. cat /sys/class/block/loop0/loop/backing_file mutex_lock_nested+0x176/0x350 ? loop_attr_do_show_backing_file+0x2f/0xd0 [loop] ? loop_attr_do_show_backing_file+0x2f/0xd0 [loop] loop_attr_do_show_backing_file+0x2f/0xd0 [loop] dev_attr_show+0x1b/0x60 ? sysfs_read_file+0x86/0x1a0 ? __get_free_pages+0x12/0x50 sysfs_read_file+0xaf/0x1a0 ioctl(LOOP_CLR_FD): wait_for_common+0x12c/0x180 ? try_to_wake_up+0x2a0/0x2a0 wait_for_completion+0x18/0x20 sysfs_deactivate+0x178/0x180 ? sysfs_addrm_finish+0x43/0x70 ? sysfs_addrm_start+0x1d/0x20 sysfs_addrm_finish+0x43/0x70 sysfs_hash_and_remove+0x85/0xa0 sysfs_remove_group+0x59/0x100 loop_clr_fd+0x1dc/0x3f0 [loop] lo_ioctl+0x223/0x7a0 [loop] Instead of taking the lo_ctl_mutex from sysfs code, take the inner lo->lo_lock, to protect the access to the backing_file data. Thanks to Tejun for help debugging and finding a solution. Cc: Milan Broz <mbroz@redhat.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: stable@kernel.org Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | | loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop ↵Kay Sievers2011-07-312-17/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | devices Instead of unconditionally creating a fixed number of dead loop devices which need to be investigated by storage handling services, even when they are never used, we allow distros start with 0 loop devices and have losetup(8) and similar switch to the dynamic /dev/loop-control interface instead of searching /dev/loop%i for free devices. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | | loop: add management interface for on-demand device allocationKay Sievers2011-07-311-4/+116
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Loop devices today have a fixed pre-allocated number of usually 8. The number can only be changed at module init time. To find a free device to use, /dev/loop%i needs to be scanned, and all devices need to be opened until a free one is possibly found. This adds a new /dev/loop-control device node, that allows to dynamically find or allocate a free device, and to add and remove loop devices from the running system: LOOP_CTL_ADD adds a specific device. Arg is the number of the device. It returns the device i or a negative error code. LOOP_CTL_REMOVE removes a specific device, Arg is the number the device. It returns the device i or a negative error code. LOOP_CTL_GET_FREE finds the next unbound device or allocates a new one. No arg is given. It returns the device i or a negative error code. The loop kernel module gets automatically loaded when /dev/loop-control is accessed the first time. The alias specified in the module, instructs udev to create this 'dead' device node, even when the module is not loaded. Example: cfd = open("/dev/loop-control", O_RDWR); # add a new specific loop device err = ioctl(cfd, LOOP_CTL_ADD, devnr); # remove a specific loop device err = ioctl(cfd, LOOP_CTL_REMOVE, devnr); # find or allocate a free loop device to use devnr = ioctl(cfd, LOOP_CTL_GET_FREE); sprintf(loopname, "/dev/loop%i", devnr); ffd = open("backing-file", O_RDWR); lfd = open(loopname, O_RDWR); err = ioctl(lfd, LOOP_SET_FD, ffd); Cc: Tejun Heo <tj@kernel.org> Cc: Karel Zak <kzak@redhat.com> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
| * | | | | loop: replace linked list of allocated devices with an idr indexKay Sievers2011-07-311-72/+80
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the linked list, that keeps track of allocated devices, with an idr index to allow a more efficient lookup of devices. Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
* | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2011-08-197-152/+430
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: OF: Don't crash when bridge parent is NULL. PCI: export pcie_bus_configure_settings symbol PCI: code and comments cleanup PCI: make cardbus-bridge resources optional PCI: make SRIOV resources optional PCI : ability to relocate assigned pci-resources PCI: honor child buses add_size in hot plug configuration PCI: Set PCI-E Max Payload Size on fabric
| * | | | | | PCI: OF: Don't crash when bridge parent is NULL.David Daney2011-08-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In pcibios_get_phb_of_node(), we will crash while booting if bus->bridge->parent is NULL. Check for this case and avoid dereferencing the NULL pointer. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: export pcie_bus_configure_settings symbolJon Mason2011-08-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pcie_bus_configure_settings needs to be exported if the PCI hotplug driver is being compiled as a module. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: code and comments cleanupRam Pai2011-08-011-55/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | a) adjust_resource_sorted() is now called reassign_resource_sorted() b) nice-to-have is now called optional c) add_list is now called realloc_list. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: make cardbus-bridge resources optionalRam Pai2011-08-012-9/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allocate resources to cardbus bridge only after all other genuine resources requests are satisfied. Dont retry if resource allocation for cardbus-bridges fail. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: make SRIOV resources optionalYinghai Lu2011-08-011-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From: Yinghai Lu <yinghai@kernel.org> Allocate resources to SRIOV BARs only after all other required resource-requests are satisfied. Dont retry if resource allocation for SRIOV BARs fail. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI : ability to relocate assigned pci-resourcesRam Pai2011-08-012-67/+112
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently pci-bridges are allocated enough resources to satisfy their immediate requirements. Any additional resource-requests fail if additional free space, contiguous to the one already allocated, is not available. This behavior is not reasonable since sufficient contiguous resources, that can satisfy the request, are available at a different location. This patch provides the ability to expand and relocate a allocated resource. v2: Changelog: Fixed size calculation in pci_reassign_resource() v3: Changelog : Split this patch. The resource.c changes are already upstream. All the pci driver changes are in here. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: honor child buses add_size in hot plug configurationYinghai Lu2011-08-011-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git commit c8adf9a3e873eddaaec11ac410a99ef6b9656938 "PCI: pre-allocate additional resources to devices only after successful allocation of essential resources." fails to take into consideration the optional-resources needed by children devices while calculating the optional-resource needed by the bridge. This can be a problem on some setup. For example, if a hotplug bridge has 8 children hotplug bridges, the bridge should have enough resources to accomodate the hotplug requirements for each of its children hotplug bridges. Currently this is not the case. This patch fixes the problem. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
| * | | | | | PCI: Set PCI-E Max Payload Size on fabricJon Mason2011-08-013-44/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On a given PCI-E fabric, each device, bridge, and root port can have a different PCI-E maximum payload size. There is a sizable performance boost for having the largest possible maximum payload size on each PCI-E device. However, if improperly configured, fatal bus errors can occur. Thus, it is important to ensure that PCI-E payloads sends by a device are never larger than the MPS setting of all devices on the way to the destination. This can be achieved two ways: - A conservative approach is to use the smallest common denominator of the entire tree below a root complex for every device on that fabric. This means for example that having a 128 bytes MPS USB controller on one leg of a switch will dramatically reduce performances of a video card or 10GE adapter on another leg of that same switch. It also means that any hierarchy supporting hotplug slots (including expresscard or thunderbolt I suppose, dbl check that) will have to be entirely clamped to 128 bytes since we cannot predict what will be plugged into those slots, and we cannot change the MPS on a "live" system. - A more optimal way is possible, if it falls within a couple of constraints: * The top-level host bridge will never generate packets larger than the smallest TLP (or if it can be controlled independently from its MPS at least) * The device will never generate packets larger than MPS (which can be configured via MRRS) * No support of direct PCI-E <-> PCI-E transfers between devices without some additional code to specifically deal with that case Then we can use an approach that basically ignores downstream requests and focuses exclusively on upstream requests. In that case, all we need to care about is that a device MPS is no larger than its parent MPS, which allows us to keep all switches/bridges to the max MPS supported by their parent and eventually the PHB. In this case, your USB controller would no longer "starve" your 10GE Ethernet and your hotplug slots won't affect your global MPS. Additionally, the hotplugged devices themselves can be configured to a larger MPS up to the value configured in the hotplug bridge. To choose between the two available options, two PCI kernel boot args have been added to the PCI calls. "pcie_bus_safe" will provide the former behavior, while "pcie_bus_perf" will perform the latter behavior. By default, the latter behavior is used. NOTE: due to the location of the enablement, each arch will need to add calls to this function. This patch only enables x86. This patch includes a number of changes recommended by Benjamin Herrenschmidt. Tested-by: Jordan_Hargrave@dell.com Signed-off-by: Jon Mason <mason@myri.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* | | | | | | Merge branch 'upstream-linus' of ↵Linus Torvalds2011-08-196-9/+288
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: drivers/ata/sata_dwc_460ex.c: add missing kfree ata: Add iMX pata support pata_via: disable ATAPI DMA on AVERATEC 3200 [libata] sata_sil: fix used-uninit warning
| * | | | | | | drivers/ata/sata_dwc_460ex.c: add missing kfreeJulia Lawall2011-08-191-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, error handling code in this function calls the function sata_dwc_port_stop, but this function has essentially no effect if hsdevp has not been stored in ap, which is the case throughout this function. The only effect is to print a debugging message including ap->print_id. The code is rewritten to not call sata_dwc_port_stop, but instead to jump to a local label that prints the original error message and the print_id information. In the case where hsdevp has been already allocated (but not yet stored in ap), this value is freed as well. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @exists@ local idexpression x; statement S,S1; expression E; identifier fl; expression *ptr != NULL; @@ x = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...kfree(x)...+> } when any when != true x == NULL x->fl ...> ( if (x == NULL) S1 | if (...) { ... when != x when forall ( return \(0\|<+...x...+>\|ptr\); | * return ...; ) } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | | | | | | ata: Add iMX pata supportArnaud Patard (Rtp)2011-08-193-0/+263
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic support for pata on iMX. It has been tested only on imx51. SDMA support will probably be added later so this version supports only PIO. v2: - enable only when needed IORDY - use dev_get_drvdata v3: - add missing clk_put() calls - use platform_get_irq() - fix resume code to avoid disabling IORDY on resume v4: - Remove EXPERIMENTAL and switch to depends on ARCH_MXC - Use devm_kzalloc() - make clock a must-have - Use only 1 ioremap Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
| * | | | | | | pata_via: disable ATAPI DMA on AVERATEC 3200Tejun Heo2011-08-191-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On AVERATEC 3200, pata_via causes memory corruption with ATAPI DMA, which often leads to random kernel oops. The cause of the problem is not well understood yet and only small subset of machines using the controller seem affected. Blacklist ATAPI DMA on the machine. Signed-off-by: Tejun Heo <tj@kernel.org> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=11426 Reported-and-tested-by: Jim Bray <jimsantelmo@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
| * | | | | | | [libata] sata_sil: fix used-uninit warningJeff Garzik2011-08-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Init 'serror' to silence the following warning: drivers/ata/sata_sil.c: In function ‘sil_interrupt’: drivers/ata/sata_sil.c:453:14: warning: ‘serror’ may be used uninitialized in this function [-Wuninitialized] This is not a 'can never happen' but is nonetheless extremely unlikely. The easiest and cleanest warning fix is simply to init the var, rather than worry about marking the var uninit-ok. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
* | | | | | | | Merge branch 'for-linus' of ↵Linus Torvalds2011-08-184-8/+14
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/iser: Support iSCSI PDU padding IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long) IPoIB: Fix possible NULL dereference in ipoib_start_xmit()
| * \ \ \ \ \ \ \ Merge branches 'ipoib' and 'iser' into for-nextRoland Dreier2011-08-173-5/+9
| |\ \ \ \ \ \ \ \
| | * | | | | | | | IB/iser: Support iSCSI PDU paddingOr Gerlitz2011-08-172-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RFC3270 mandates that iSCSI PDUs are padded to the closest integer number of four byte words. Fix the iser code to support that on both the TX/RX flows. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
| | * | | | | | | | IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long)Or Gerlitz2011-08-171-1/+1
| | |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code that prepares the SG associated with SCSI command for FMR was buggy for systems with DMA addresses that don't fit in unsigned long, e.g under the 32-bit based XenServer dom0 sizeof(dma_addr_t) is 8. Fix that by casting to unsigned long long a masking constant used by the code. This resolves a crash in iser_sg_to_page_vec on this system. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 06:40:38 +0100