summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* mtd: remove use of __devexitBill Pemberton2012-11-2246-50/+50
| | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: remove use of __devinitconstBill Pemberton2012-11-223-3/+3
| | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinitconst is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: remove use of __devinitdataBill Pemberton2012-11-225-5/+5
| | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinitdata is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: remove use of __devinitBill Pemberton2012-11-2250-93/+92
| | | | | | | | CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: remove use of __devexit_pBill Pemberton2012-11-2238-38/+38
| | | | | | | | CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: Drop FORTUNET supportAlexander Shiyan2012-11-223-285/+0
| | | | | | | | The kernel has never contained the symbol SA1100_FORTUNET so the driver never compiled and can be removed safely. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: ofpart: Replicate mtd cmdline "lk" option with device tree "lock" propertyJosh Radel2012-11-221-1/+4
| | | | | | | | | The mtd partition command line parser already supports a "lk" option to mask MTD_POWERUP_LOCK. This extends that same functionality to device tree partition specifications. Signed-off-by: Josh Radel <jradel@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: m25p80: add support for the Winbond w25q80bl chipStephen Warren2012-11-221-0/+1
| | | | | Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm47xxnflash: enable BCM4706 driverRafał Miłecki2012-11-223-3/+5
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm47xxnflash: implement readingRafał Miłecki2012-11-222-0/+107
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm47xxnflash: support for NAND_CMD_READID commandRafał Miłecki2012-11-222-0/+106
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm47xxnflash: init NAND on BCM4706Rafał Miłecki2012-11-222-0/+110
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: prepare place for BCMA NAND flash driver(s)Rafał Miłecki2012-11-225-0/+135
| | | | | | | | | BCMA bus can contain NAND flash memory, it's registered in system as platform device. This adds required hooks and place for controler specific drivers. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* bcma: export PLL reading functionRafał Miłecki2012-11-221-1/+2
| | | | | | | This is required by NAND flash driver for initializing wait counters. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm63xxpart: use correct printk format for partitionsJonas Gorski2012-11-211-3/+2
| | | | | | | | Use ll to be able to remove the casts. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm63xxpart: move the last curpart++ to its correct placeJonas Gorski2012-11-211-1/+1
| | | | | | | | The line belongs above the comment, not below it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm63xxpart: make fixed part length calculation more genericJonas Gorski2012-11-211-4/+7
| | | | | | | | | | The CFE does not use 4K sectors even if the flash supports it, so for the fixed partitions like CFE itself or NVRAM the erase block size is always 64k or bigger. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm63xxpart: merge sparelen calculationJonas Gorski2012-11-211-2/+1
| | | | | | | | | The length of the spare part is calculated the same way in both branches so move to a common place. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: bcm63xxpart: remove unused variableJonas Gorski2012-11-211-8/+3
| | | | | | | | namelen is never used, so drop it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: use SQUASHFS_MAGIC from uapi/linux/magic.hLuka Perkov2012-11-211-5/+2
| | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: mtd_blkdevs: Replace request handler kthread with a workqueueEzequiel Garcia2012-11-211-32/+15
| | | | | | | | | | | | | | | | | | | By replacing a kthread with a workqueue, the code is now a bit clearer. There's also a slight reduction of code size (numbers apply for x86): Before: text data bss dec hex filename 3248 36 0 3284 cd4 drivers/mtd/mtd_blkdevs.o After: text data bss dec hex filename 3150 36 0 3186 c72 drivers/mtd/mtd_blkdevs.o Due to lack of real hardware, tests have been performed on an emulated environment with mtdswap and mtdblock over nandsim devices. Some real testing should be done, before merging this patch. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: mtd_blkdev: Use a different name for block_device_operations variableEzequiel Garcia2012-11-211-2/+2
| | | | | | | | | struct mtd_blktrans_ops is a type, and mtd_blktrans_ops is a variable. To improve code clarity it's better to not use the same names, so we just change the latter. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: Fix typo mtd/testsMasanari Iida2012-11-188-9/+9
| | | | | | | Correct spelling typo in printk within drivers/mtd/tests. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: de-select the chip when it is not usedHuang Shijie2012-11-181-4/+6
| | | | | | | | | | | | | | | | | | When we scan several nand chips with nand_scan(), such as ....................... nand_scan(*, 2); ....................... In nand_scan_ident(), the maxchips will become 2, so the current code will select chip 1 to read the device ID. But the chip 0 is still selected in this case. To make the logic clear, we'd better de-select the chip when it is not used. This patch de-select the nand chip if it is not used any more. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: s3c2410: Fix potential NULL pointer dereference errorSachin Kamat2012-11-181-2/+5
| | | | | | | | 'set' is tested for NULL. But subsequently accessed without the check. Thus making it conditional to avoid NULL pointer dereferencing. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: physmap_of: allow to specify the mtd name for retro compatiblityJean-Christophe PLAGNIOL-VILLARD2012-11-161-1/+4
| | | | | | | | | linux,mtd-name allow to specify the mtd name for retro capability with physmap-flash drivers as boot loader pass the mtd partition via the old device name physmap-flash. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: fsl_ifc_nand: wait tWB time, poll R/B before command executionPrabhakar Kushwaha2012-11-161-2/+2
| | | | | | | | | | | | | | IFC_FIR_OP_CMD0 issues command for execution without checking flash readiness. It may cause problem if flash is not ready. Instead use IFC_FIR_OP_CW0 which Wait for tWB time and poll R/B to return high or time-out, before issuing command. NAND_CMD_READID command implemention does not fulfill above requirement. So update its programming. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Hemant Nautiyal <hemant.nautiyal@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: diskonchip: don't warn about ARM architectureArnd Bergmann2012-11-162-4/+0
| | | | | | | | | | | | | Enabling the diskonchip drivers on most architectures results in a pointless warning "#warning Unknown architecture for DiskOnChip. No default probe locations defined". The driver can in fact handle the default location already through the CONFIG_MTD_DOCPROBE_ADDRESS, which gets set on the platforms that need it, and we get a run-time error if this is not set correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: nand_wait: warn if the nand is busy on exitMatthieu CASTET2012-11-151-0/+2
| | | | | | | | | | | | | | | | | | | This patch allow to detect buggy driver/hardware with bad RnB (dev_ready) management or when timeout occurs in polling mode. This works when dev_ready is set or not set. There are 2 methods to wait for an erase/program command completion: 1. Wait until nand RnB pin goes high (that's what chip->dev_ready usually does) 2. Poll the device: send a status (0x70) command and read status byte in a loop until bit NAND_STATUS_READY is set In all cases, you should send a status command after completion, to check if the operation was successful. And if the operation completed, the status should have bit NAND_STATUS_READY set. Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: davinci: add support for parition binding nodesMurali Karicheri2012-11-151-3/+10
| | | | | | | | | Enhance the driver to support partition subnodes inside the nand device bindings to describe partions on the nand device. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: cmdlinepart: fix the overflow of big mtd partitionsHuang Shijie2012-11-151-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | When the kernel parses the following cmdline #mtdparts=gpmi-nand:16m(boot),16m(kernel),1g(home),4g(test),-(usr) for a big nand chip Micron MT29F64G08AFAAAWP(8GB), we got the following wrong result: ............................................. "mtd: partition size too small (0)" ............................................. We can not get any partition. The "4g(test)" partition triggers a overflow of the "size". The memparse() returns 4g to the "size", but the size is "unsigned long" type, so a overflow occurs, the "size" becomes zero in the end. This patch changes the "size"/"offset" to "unsigned long long" type, and replaces the UINT_MAX with ULLONG_MAX for macros SIZE_REMAINING and OFFSET_CONTINUOUS. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtdoops: don't erase flash at each bootMatthieu CASTET2012-11-151-8/+7
| | | | | | | | | | | | | | | | | | | | | | | The current version on mtdoops erase first block of mtdoops partition at each boot if there is no oops stored in flash. This can wear the flash. When mtdoops start, find_next_position is called to find the next free entry in the circular buffer. But if the flash is erased, find_next_position don't find anything (maxcount == 0xffffffff) and start with the first entry after erasing it. The scanning that is done in find_next_position already track free/used entries. So if at the end of the scanning we don't find anything, we can start at the first entry and erased the entry only if it is marked as used. Most of this is implemented in mtdoops_inc_counter, so to avoid duplicating code, if we don't find anything we set position to -1. mtdoops_inc_counter with increment it, erase the entry if needed and start as before with nextpage = 0 and nextcount = 1). Also during the scan phase, we use the MTDOOPS_KERNMSG_MAGIC to detect corruped entries. Signed-off-by: Matthieu Castet <matthieu.castet@parrot@com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: sh_flctl: Add device tree supportBastian Hecht2012-11-151-7/+87
| | | | | | | | | | | | | | The flctl can now be probed via device tree setup in addition to the existing platform data way. SoC specific setup data is set in the .data member of the OF match, so kept within the driver itself, while board/user specific setup - like partitioning - is taken from the device tree. Actual configuration is added for the SoC sh7372. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: sh_flctl: Add DMA capabiltyBastian Hecht2012-11-151-2/+171
| | | | | | | | | | | | | The code probes if DMA channels can get allocated and tears them down at removal/failure if needed. If available it uses them to transfer the data part (not ECC). On failure we fall back to PIO mode. Based on Guennadi Liakhovetski's code from the sh_mmcif driver. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: sh_flctl: Minor cleanupsBastian Hecht2012-11-151-21/+16
| | | | | | | | | | | | | | | | Some small fixes to avoid sparse and smatch complain. Other cosmetic fixes as well. - Change of the type of the member index in struct sh_flctl from signed to unsigned. We use index by addressing array members, so unsigned is more concise here. Adapt functions relying on sh_flctl::index. - Remove a blurring cast in write_fiforeg(). - Apply consistent naming scheme when refering to the data buffer. - Shorten some unnecessarily verbose functions. - Remove spaces at start of lines. Signed-off-by: Bastian Hecht <hechtb@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: gpmi: remove unneccessary headerHuang Shijie2012-11-153-3/+6
| | | | | | | | | The whole gpmi-nand driver has turned to pure devicetree supported. So the linux/mtd/gpmi-nand.h is not neccessary now. Just remove it, and move some macros to the gpmi-nand driver itself. Signed-off-by: Huang Shijie <shijie8@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: gpio-nand: Ability to use driver for configurations without RDY-pinAlexander Shiyan2012-11-151-7/+15
| | | | | | | | | In some configurations of "gpio-nand" RDY-pin may be not connected. This patch allow to use driver for these configurations. In this case we are assume that device always ready. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: use the NAND_STATUS_FAIL to replace the hardcodeHuang Shijie2012-11-151-2/+2
| | | | | | | | | Use the NAND_STATUS_FAIL to replace the hardcode "0x01", which make the code more readable. Signed-off-by: Huang Shijie <shijie8@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: mtd_oobtest: printk -> pr_{info,err,crit}Vikram Narayanan2012-11-151-87/+84
| | | | | | | | | | Use pr_info() and pr_err() while defining pr_fmt(). This saves a few characters, joins a few lines, and makes the code a little more readable (and grep-able). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: tests: mtd_torturetest: Replace printk with pr_{info,crit}Vikram Narayanan2012-11-151-36/+37
| | | | | | | Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: tests: mtd_subpagetest: replace printk with pr_{info,crit,err}Vikram Narayanan2012-11-151-62/+62
| | | | | | | Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: tests: mtd_speedtest: Replace printk with pr_{info,crit,err}Vikram Narayanan2012-11-151-44/+44
| | | | | | | Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: tests: mtd_stresstest: Replace printk with pr_{info,crit,err}Vikram Narayanan2012-11-151-22/+22
| | | | | | | Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: tests: mtd_readtest: Replace printk with pr_{info,err}Vikram Narayanan2012-11-151-21/+21
| | | | | | | Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: tests: mtd_pagetest: Replace printk with pr_{info,crit,err}Vikram Narayanan2012-11-151-76/+76
| | | | | | | Use pr_fmt instead of PRINT_PREF macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: tests: mtd_nandecctest: Use pr_fmt macroVikram Narayanan2012-11-151-2/+4
| | | | | | | Use KBUILD_MODNAME instead of hardcoding the filename Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: tests: mtd_nandbiterrs: replace msg macro with pr_{info,err}Vikram Narayanan2012-11-151-36/+37
| | | | | | | Use pr_fmt instead of msg macro Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: spear_smi: use module_platform_driver macroSrinivas Kandagatla2012-11-151-12/+1
| | | | | | | | This patch removes some code duplication by using module_platform_driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: fsmc_nand: use relaxed variants of io accessorsVipin Kumar2012-11-151-25/+29
| | | | | | | | | | | | | | Use relaxed variants of readl/writel accessors. readl/writel io accessors use explicit dsb instruction which causes stalls in the processor core resulting several cycles of delay for each access Use relaxed variants where ever possible. This also results in an improved read/write performance. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
* mtd: fsmc_nand: modify the wait to uninterruptibleVipin Kumar2012-11-151-1/+1
| | | | | | | | | | Interruptible wait caused trouble in fsmc hardware state machine if the application was killed abruptly. To make fsmc operation safe turn wait in to un-interruptible. Signed-off-by: Vipin Kumar <vipin.kumar@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 13:58:59 +0100