summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drm/i915: replace DRM_DEBUG with DRM_DEBUG_KMS in intel_lvdsyakui_zhao2009-06-111-2/+5
| | | | | | | | Use the DRM_DEBUG_KMS macro definition to print the debug info for the LVDS. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: add separate drm debugging levelsyakui_zhao2009-06-111-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now all the DRM debug info will be reported if the boot option of "drm.debug=1" is added. Sometimes it is inconvenient to get the debug info in KMS mode. We will get too much unrelated info. This will separate several DRM debug levels and the debug level can be used to print the different debug info. And the debug level is controlled by the module parameter of drm.debug In this patch it is divided into four debug levels; drm_core, drm_driver, drm_kms, drm_mode. At the same time we can get the different debug info by changing the debug level. This can be done by adding the module parameter. Of course it can be changed through the /sys/module/drm/parameters/debug after the system is booted. Four debug macro definitions are provided. DRM_DEBUG(fmt, args...) DRM_DEBUG_DRIVER(prefix, fmt, args...) DRM_DEBUG_KMS(prefix, fmt, args...) DRM_DEBUG_MODE(prefix, fmt, args...) When the boot option of "drm.debug=4" is added, it will print the debug info using DRM_DEBUG_KMS macro definition. When the boot option of "drm.debug=6" is added, it will print the debug info using DRM_DEBUG_KMS/DRM_DEBUG_DRIVER. Sometimes we expect to print the value of an array. For example: SDVO command, In such case the following four DRM debug macro definitions are added: DRM_LOG(fmt, args...) DRM_LOG_DRIVER(fmt, args...) DRM_LOG_KMS(fmt, args...) DRM_LOG_MODE(fmt, args...) Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* radeon: remove _DRM_DRIVER from the preadded sarea mapDave Airlie2009-06-111-1/+1
| | | | | | | This shouldn't be there and is what broke r600 late in the 2.6.30 release cycle with Ben's patch. Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: don't associate _DRM_DRIVER maps with a masterBen Skeggs2009-06-111-1/+2
| | | | | | | | | | | | A driver will use the _DRM_DRIVER map flag to indicate that it wants to be responsible for removing the map itself, bypassing the DRM's automagic cleanup code. Since the multi-master changes this has been broken, resulting in some drivers having their registers unmapped before it's finished with them. Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm: simplify kcalloc() call to kzalloc().Robert P. J. Day2009-06-111-1/+1
| | | | | | | | | | | Calls to kcalloc() for a single element can be simplified to calls to kzalloc(). Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Cc: Dave Airlie <airlied@linux.ie> Cc: Eric Anholt <eric@anholt.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
* intelfb: fix spelling of "CLOCK"Pavel Roskin2009-06-111-1/+1
| | | | | | | | Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: Eric Anholt <eric@anholt.net> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
* drm/i915: Hook connector to encoder during load detection (fixes tv/vga detect)Keith Packard2009-06-101-0/+2
| | | | | | | | | With the DRM-driven DPMS code, encoders are considered idle unless a connector is hooked to them, so mode setting is skipped. This makes load detection fail as none of the hardware is enabled. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: NOMEM->NOSPCChris Wilson2009-06-091-5/+5
| | | | | | | | To differentiate between encountering an out-of-memory error with running out of space in the aperture, use ENOSPC for the later. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: use I915_GEM_GPU_DOMAINSChris Wilson2009-06-091-13/+9
| | | | | Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: no need to hold mutex for object lookupChris Wilson2009-06-091-2/+1
| | | | | Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Call drm_vblank_post_modeset() on error paths.Chris Wilson2009-06-091-4/+2
| | | | | | | | Ensure that the drm_vblank_pre_modeset() is always balanced by drm_vblank_post_modeset() within intel_crtc_mode_set(). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: OR in the COMMAND read domain for the batch buffer.Chris Wilson2009-06-091-2/+6
| | | | | | | | | The batch buffer may be shared with another read buffer, so we should not ignore any previously set domains, but just or in the command domain (and check that the buffer is not writable). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Sanity check execbuffer arguments before touching state.Chris Wilson2009-06-091-11/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By sending a broken execbuffer (its length was not suitably aligned) I triggered an operation upon a freed object. The invalid alignment was discovered after updating the write_domain on the object but before the object was placed on the active queue. So during the unwind process following the error, the now freed object attempts to flush its non-existent, but outstanding, GPU writes causing this use-after-free. [drm:i915_dispatch_gem_execbuffer] *ERROR* alignment [drm:i915_gem_execbuffer] *ERROR* dispatch failed -22 WARNING: at lib/kref.c:43 warn_slowpath_null+0x10/0x15() Modules linked in: Pid: 4552, comm: lt-csi-drm Not tainted 2.6.30-rc6 #423 Call Trace: [<c0119ef3>] warn_slowpath_fmt+0x57/0x6d [<c014de24>] ? get_pageblock_migratetype+0x18/0x1e [<c014e8fd>] ? free_hot_page+0xa/0xc [<c014e915>] ? __free_pages+0x16/0x1f [<c0153ebf>] ? shmem_truncate_range+0x63e/0x656 [<c015fb2f>] ? slob_page_alloc+0x146/0x1c8 [<c0119f19>] warn_slowpath_null+0x10/0x15 [<c01f55f2>] kref_get+0x1b/0x21 [<c02605db>] i915_gem_object_move_to_active+0x1f/0x56 [<c0261302>] i915_add_request+0x156/0x19a [<c026136e>] i915_gem_object_flush_gpu_write_domain+0x28/0x3f [<c0261eca>] i915_gem_object_unbind+0x4a/0x124 [<c0261fd7>] i915_gem_free_object+0x33/0x9b [<c0250d6b>] drm_gem_object_free+0x28/0x4a [<c0250d43>] ? drm_gem_object_free+0x0/0x4a [<c01f55ce>] kref_put+0x38/0x41 [<c0250cbf>] drm_gem_object_unreference+0x11/0x13 [<c0250d06>] drm_gem_object_handle_unreference+0x1e/0x21 [<c0250d13>] drm_gem_object_release_handle+0xa/0xe [<c01f3e6b>] idr_for_each+0x5f/0x98 [<c0250d09>] ? drm_gem_object_release_handle+0x0/0xe [<c0250daf>] drm_gem_release+0x22/0x34 [<c025046f>] drm_release+0x1e8/0x3c4 [<c0162d25>] __fput+0xaf/0x146 [<c0162dce>] fput+0x12/0x14 [<c01605ef>] filp_close+0x48/0x52 [<c011b182>] put_files_struct+0x57/0x9b [<c011b1e4>] exit_files+0x1e/0x20 [<c011c6b6>] do_exit+0x16d/0x511 [<c03704ab>] ? __schedule+0x3d4/0x3e5 [<c0103f0d>] ? handle_irq+0xd/0x69 [<c011caa7>] do_group_exit+0x4d/0x73 [<c011cae0>] sys_exit_group+0x13/0x17 [<c010268c>] sysenter_do_call+0x12/0x2b Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Skip lvds with Aopen i945GTt-VFAMichael Cousin2009-06-091-0/+7
| | | | | Signed-off-by: Michael Cousin <mika.cousin@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: handle interrupt on new chipsetZhenyu Wang2009-06-094-8/+190
| | | | | | | | | | Update interrupt handling methods for IGDNG with new registers for display and graphics interrupt functions. As we won't use irq-based vblank sync in dri2, so display interrupt on new chip will be used for hotplug only in future. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: enable MCHBAR if neededJesse Barnes2009-06-092-0/+147
| | | | | | | | | | | | | | | Using the new PNP resource checking code, this patch allows the i915 driver to allocate MCHBAR space if needed and use the BAR to determine current memory settings. [apw@canonical.com: moved to the new generic PNP resource interface] Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Eric Anholt <eric@anholt.net> failure to update-index after git-am --reject to hand-apply Signed-off-by: Eric Anholt <eric@anholt.net>
* pnp: add PNP resource range checking functionBjorn Helgaas2009-06-051-0/+18
| | | | | | | | | | Add a PNP resource range check function, indicating whether a resource has been assigned to any device. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> [apw@canonical.com: fixed up exports et al] Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: avoid non-atomic sysrq executionJesse Barnes2009-06-051-1/+7
| | | | | | | | | | | The sysrq functions are executed in hardirq context, so we shouldn't be calling sleeping functions from them, like mutex_locks or memory allocations. Fix up the i915 sysrq handler to avoid this. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: apply G45 vblank count code to all G4x chips and fix max_frame_countJesse Barnes2009-06-052-3/+4
| | | | | | | | All G4x and newer chips use the new style frame count register, with a full 32 bit frame count. Update the code to reflect this. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: add ignore lvds quirk info for AOpen Mini PCJarod Wilson2009-06-051-2/+8
| | | | | | | | | | Fix a FIXME in the intel LVDS bring-up code, adding the appropriate blacklist entry for the AOpen Mini PC, courtesy of a dmidecode dump from Florian Demmer. Signed-off-by: Jarod Wilson <jarod@redhat.com> CC: Florian Demmer <florian@demmer.org> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Initialize the SDVO device based on the sdvo info parsed from VBTyakui_zhao2009-06-051-3/+40
| | | | | | | | http://bugs.freedesktop.org/show_bug.cgi?id=20429 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> [anholt: Massive cleanup of the slave addr function] Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: parse VBT general definition block to get the SDVO device infoyakui_zhao2009-06-052-1/+93
| | | | | | | | | | | | | | | The general definition block contains the child device tables, which include the SDVO device info. For example: device slave address, device dvo port, device type. We will get the info of SDVO device by parsing the general definition blocks. Only when a valid slave address is found, it is regarded as the SDVO device. And the info of DVO port and slave address is recorded. http://bugs.freedesktop.org/show_bug.cgi?id=20429 Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add the structure of child_device_config in video BIOS tables.yakui_zhao2009-06-051-8/+93
| | | | | Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add Display Port register definesKeith Packard2009-06-051-0/+163
| | | | | | | | | This adds the register definitions for the display port enable register along with those for the GMCH and Link M/N ratios required to drive display port outputs. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Don't trim cursor addresses to 11 bitsKeith Packard2009-06-051-4/+4
| | | | | | | | | We can safely assume that cursor addresses will not extend beyond the addressable screen dimensions; setting the additional bits is harmless in any case. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Set correct TV detection voltage level override valuesMa Ling2009-06-052-3/+6
| | | | | | | | | | | We detect TV connect status by setting DAC voltage level override values as 0.7 voltage for DAC_A/B/C. The corresponding 2-bits shold be 0x2, In order correctly to set last bit as 0, at first we must clean it. It fixed freedesktop.org bug #21204 Signed-off-by: Ma Ling <ling.ma@intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add LVDS support for IGDNGZhenyu Wang2009-06-052-26/+114
| | | | | Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add HDMI support on IGDNGZhenyu Wang2009-06-052-3/+47
| | | | | Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: enable kernel modesetting on IGDNGZhenyu Wang2009-06-053-38/+643
| | | | | | | | This adds kernel mode setting on IGDNG with VGA output support. Note that suspend/resume doesn't work yet. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Disable tiling on IGDNG for nowZhenyu Wang2009-06-051-0/+7
| | | | | | | Swizzle bit detection not working right on it. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Disable opregion on IGDNG for nowZhenyu Wang2009-06-052-3/+8
| | | | | | | Disable OpRegion support for now until verified on new chipsets. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add new chipset register definitionsZhenyu Wang2009-06-051-0/+447
| | | | | Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Add chipset/feature defines for for new chipsetsZhenyu Wang2009-06-051-5/+13
| | | | | | Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> [anholt: dropped drm_pciids.h hunk to avoid loading an incomplete driver] Signed-off-by: Eric Anholt <eric@anholt.net>
* agp/intel: Add support for new chipsetsZhenyu Wang2009-06-051-1/+15
| | | | | | | Both desktop and mobile versions are added. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
* drm/i915: Change GEM throttling to be 20ms like the comment says.Eric Anholt2009-06-043-19/+61
| | | | | | | | | | | | | | | | | | | keithp didn't like the original 20ms plan because a cooperative client could be starved by an uncooperative client. There may even have been problems with cooperative clients versus cooperative clients. So keithp changed throttle to just wait for the second to last seqno emitted by that client. It worked well, until we started getting more round-trips to the server due to DRI2 -- the server throttles in BlockHandler, and so if you did more than one round trip after finishing your frame, you'd end up unintentionally syncing to the swap. Fix this by keeping track of the client's requests, so the client can wait when it has an outstanding request over 20ms old. This should have non-starving behavior, good behavior in the presence of restarts, and less waiting. Improves high-settings openarena performance on my GM45 by 50%. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* drm/i915: Save/restore cursor state on suspend/resume.Eric Anholt2009-06-042-0/+28
| | | | | | | | | | This may fix cursor corruption in X on resume, which would persist until the cursor was hidden and then shown again. V2: Also include the cursor control regs. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
* drm/i915: Remove a bad BUG_ON in the fence management code.Eric Anholt2009-06-041-3/+0
| | | | | | | | | | This could be triggered by a gtt mapping fault on 965 that decides to remove the fence from another object that happens to be active currently. Since the other object doesn't rely on the fence reg for its execution, we don't wait for it to finish. We'll soon be not waiting on 915 most of the time as well, so just drop the BUG_ON. Signed-off-by: Eric Anholt <eric@anholt.net>
* parport: quickfix the proc registration bugAlan Cox2009-06-021-3/+10
| | | | | | | | | | | | | | Ideally we should have a directory of drivers and a link to the 'active' driver. For now just show the first device which is effectively the existing semantics without a warning. This is an update on the original buggy patch that I then forgot to resubmit. Confusingly it was proposed by Red Hat, written by Etched Pixels fixed and submitted by Intel ... Resolves-Bug: http://bugzilla.kernel.org/show_bug.cgi?id=9749 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* pata_netcell: LBA48 force identify bits correctAlan Cox2009-06-021-1/+12
| | | | | | | | | | | This matches Bartlomiej's patch for ide_pci_generic: c339dfdd65b52bfd947ab29d1210314a2f6d622d In the libata case netcell has its own mini driver. I suspect this fix is actually only needed for some firmware revs but it does no harm either way. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-06-022-4/+16
|\ | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: net_cls: fix unconfigured struct tcf_proto keeps chaining and avoid kernel panic when we use cls_cgroup e1000: add missing length check to e1000 receive routine forcedeth: add phy_power_down parameter, leave phy powered up by default (v2) Bluetooth: Remove useless flush_work() causing lockdep warnings
| * e1000: add missing length check to e1000 receive routineNeil Horman2009-06-021-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Patch to fix bad length checking in e1000. E1000 by default does two things: 1) Spans rx descriptors for packets that don't fit into 1 skb on recieve 2) Strips the crc from a frame by subtracting 4 bytes from the length prior to doing an skb_put Since the e1000 driver isn't written to support receiving packets that span multiple rx buffers, it checks the End of Packet bit of every frame, and discards it if its not set. This places us in a situation where, if we have a spanning packet, the first part is discarded, but the second part is not (since it is the end of packet, and it passes the EOP bit test). If the second part of the frame is small (4 bytes or less), we subtract 4 from it to remove its crc, underflow the length, and wind up in skb_over_panic, when we try to skb_put a huge number of bytes into the skb. This amounts to a remote DOS attack through careful selection of frame size in relation to interface MTU. The fix for this is already in the e1000e driver, as well as the e1000 sourceforge driver, but no one ever pushed it to e1000. This is lifted straight from e1000e, and prevents small frames from causing the underflow described above Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * forcedeth: add phy_power_down parameter, leave phy powered up by default (v2)Ed Swierk2009-06-021-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a phy_power_down parameter to forcedeth: set to 1 to power down the phy and disable the link when an interface goes down; set to 0 to always leave the phy powered up. The phy power state persists across reboots; Windows, some BIOSes, and older versions of Linux don't bother to power up the phy again, forcing users to remove all power to get the interface working (see http://bugzilla.kernel.org/show_bug.cgi?id=13072). Leaving the phy powered on is the safest default behavior. Users accustomed to seeing the link state reflect the interface state and/or wanting to minimize power consumption can set phy_power_down=1 if compatibility with other OSes is not an issue. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2009-06-011-1/+1
|\ \ | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Update documentation on fan_max hwmon: (lm78) Add missing __devexit_p()
| * | hwmon: (lm78) Add missing __devexit_p()Mike Frysinger2009-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The remove function uses __devexit, so the .remove assignment needs __devexit_p() to fix a build error with hotplug disabled. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jean Delvare <khali@linux-fr.org>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds2009-06-0115-44/+57
|\ \ \ | | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: 3c509: Add missing EISA IDs MAINTAINERS: take maintainership of the cpmac Ethernet driver net/firmare: Ignore .cis files ath1e: add new device id for asus hardware mlx4_en: Fix a kernel panic when waking tx queue rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongle at76c50x-usb: avoid mutex deadlock in at76_dwork_hw_scan mac8390: fix build with NET_POLL_CONTROLLER cxgb3: link fault fixes cxgb3: fix dma mapping regression netfilter: nfnetlink_log: fix wrong skbuff size calculation netfilter: xt_hashlimit does a wrong SEQ_SKIP bfin_mac: fix build error due to net_device_ops convert atlx: move modinfo data from atlx.h to atl1.c gianfar: fix babbling rx error event bug cls_cgroup: read classid atomically in classifier netfilter: nf_ct_dccp: add missing DCCP protocol changes in event cache netfilter: nf_ct_tcp: fix accepting invalid RST segments
| * | 3c509: Add missing EISA IDsMaciej W. Rozycki2009-06-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several EISA device IDs for 3c509 family network cards are missing from the driver, making the cards unusable in their EISA mode. Here's a fix to add them based on the EISA configuration files distributed by 3Com and our eisa.ids database. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | ath1e: add new device id for asus hardwareGreg Kroah-Hartman2009-05-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Gary Lin reports that a new device id needs to be added to the atl1e in order to get some new Asus hardware to work properly. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | mlx4_en: Fix a kernel panic when waking tx queueYevgeny Petrilin2009-05-301-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the transmit queue gets full we enable interrupts for TX completions There was a race that we handled the TX queue both from the interrupt context and from the transmit function. Using "spin_trylock_irq()" ensures this doesn't happen. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | Merge branch 'master' of ↵David S. Miller2009-05-303-6/+9
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
| | * | rtl8187: add USB ID for Linksys WUSB54GC-EU v2 USB wifi dongleJohn W. Linville2009-05-292-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | http://bugzilla.kernel.org/show_bug.cgi?id=13383 Reported-by: Przemyslaw Kulczycki <azrael@autocom.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>