summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* brcmfmac: Fix OOB interrupt not working for BCM43362Hans de Goede2014-07-291-0/+16
| | | | | | | | | | | | | | | It has taken me a long long time to get the OOB interrupt working on the AP6210 sdio wifi/bt module found on various Allwinner A20 boards. In the end I found these magic register pokes in the cubietruck kernel tree: https://github.com/cubieboard2/linux-sunxi/commit/7f08ba395617d17e7a711507503d89a50406fe7a This is also done for the bcm43362 in broadcom's internal/proprietary driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> [arend@broadcom.com: rebased changing BCM43362 chip id to fix compilation] Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Initialize channel context ops on ahb probeRajkumar Manoharan2014-07-291-0/+1
| | | | | | | | Not doing so, could fail on device probing when use_chanctx module param is set to true. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* bcma: add support for BCM43131 that was found in Tenda W311ERafał Miłecki2014-07-293-0/+3
| | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: add support for BCM43131 chipset with N-PHY rev 17Rafał Miłecki2014-07-292-2/+4
| | | | | | | | It contains radio 0x2057 rev 14 just like a BCM43217, so it doesn't require any magic. The main difference is that BCM4313 is 1x1:1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: Fix some wrong register definesHans de Goede2014-07-291-6/+6
| | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* brcmfmac: add device tree support for SDIO devicesChen-Yu Tsai2014-07-294-0/+84
| | | | | | | | | | | | | | brcmfmac devices can use an out-of-band interrupt on a GPIO line. Currently this is specified using platform data. Add support for specifying out-of-band interrupt via device tree. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [arend@broadcom.com: conditionalize more of-code, use driver debug routines] Signed-off-by: Arend van Spriel <arend@broadcom.com> [hdegoede@redhat.com: drop clk / reg_on gpio handling, as there is no consensus on how to handle this yet] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* Merge tag 'for-linville-20140725' of git://github.com/kvalo/athJohn W. Linville2014-07-299-54/+217
|\
| * ath10k: handle attention flags correctly when using A-MSDUJanusz Dziedzic2014-07-251-8/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of A-MSDU RX we should check attention flags correctly to be sure we report correct FCS status for A-MSDU subframes. Without a patch we could report A-MSDU subframes with wrong FCS as a correct to the stack, next get a lot of DUP ACK TCP packets. Finally TP drop is seen and this drop depends on FCS errors ratio for A-MSDU frame. Example test case when TP drop is seen: - ath10k configured as an AP - used ath10k station - forced A-MSDU (7 frames) on STA - other traffic on channel (often FCS errors) - monitor iface added on AP - TCP STA -> AP traffic (iperf) a) Iperf logs for case without the patch: echo "1 64" > htt_max_amsdu_ampdu // disable A-MSDU [ ID] Interval Transfer Bandwidth [ 3] 0.0- 5.0 sec 56.6 MBytes 95.0 Mbits/sec [ 3] 5.0-10.0 sec 60.4 MBytes 101 Mbits/sec [ 3] 10.0-15.0 sec 60.2 MBytes 101 Mbits/sec [ 3] 15.0-20.0 sec 60.2 MBytes 101 Mbits/sec [ 3] 20.0-25.0 sec 63.8 MBytes 107 Mbits/sec [ 3] 25.0-30.0 sec 64.9 MBytes 109 Mbits/sec echo "7 64" > htt_max_amsdu_ampdu // set 7 A-MSDU subframes [ 3] 30.0-35.0 sec 40.0 MBytes 67.1 Mbits/sec [ 3] 35.0-40.0 sec 35.9 MBytes 60.2 Mbits/sec [ 3] 40.0-45.0 sec 36.9 MBytes 61.9 Mbits/sec [ 3] 45.0-50.0 sec 37.9 MBytes 63.5 Mbits/sec [ 3] 50.0-55.0 sec 34.5 MBytes 57.9 Mbits/sec [ 3] 55.0-60.0 sec 25.4 MBytes 42.6 Mbits/sec [ 3] 60.0-65.0 sec 48.2 MBytes 81.0 Mbits/sec [ 3] 65.0-70.0 sec 28.8 MBytes 48.2 Mbits/sec [ 3] 70.0-75.0 sec 29.2 MBytes 49.1 Mbits/sec [ 3] 75.0-80.0 sec 22.9 MBytes 38.4 Mbits/sec [ 3] 80.0-85.0 sec 26.4 MBytes 44.2 Mbits/sec [ 3] 85.0-90.0 sec 31.5 MBytes 52.8 Mbits/sec b) Iperf logs for case with patch: echo "1 64" > htt_max_amsdu_ampdu // disable A-MSDU [ 3] local 192.168.12.2 port 57512 connected with 192.168.12.1 port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 5.0 sec 60.8 MBytes 102 Mbits/sec [ 3] 5.0-10.0 sec 62.2 MBytes 104 Mbits/sec [ 3] 10.0-15.0 sec 60.9 MBytes 102 Mbits/sec echo "7 64" > htt_max_amsdu_ampdu // set 7 A-MSDU subframes [ 3] 15.0-20.0 sec 68.1 MBytes 114 Mbits/sec [ 3] 20.0-25.0 sec 80.5 MBytes 135 Mbits/sec [ 3] 25.0-30.0 sec 83.0 MBytes 139 Mbits/sec [ 3] 30.0-35.0 sec 79.1 MBytes 133 Mbits/sec [ 3] 35.0-40.0 sec 77.1 MBytes 129 Mbits/sec [ 3] 40.0-45.0 sec 77.4 MBytes 130 Mbits/sec Reported-by: Denton Gentry <denton.gentry@gmail.com> Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| * ath10k: don't advertise IBSS iftype for 10.xMichal Kazior2014-07-251-1/+2
| | | | | | | | | | | | | | | | | | The 10.x firmware does not support IBSS mode at all. It can't beacon and it crashes when trying to scan. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| * ath10k: fix Rx aggregation reorderingMichal Kazior2014-07-254-3/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Firmware doesn't perform Rx reordering so it is left to the host driver to do that. Use mac80211 to perform reordering instead of re-inventing the wheel. This fixes TCP throughput issues in some environments. Reported-by: Denton Gentry <denton.gentry@gmail.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| * Merge remote-tracking branch 'wireless-next/master' into ath-nextKalle Valo2014-07-2432-555/+1376
| |\
| * | ath10k: prevent endless pci rx loopMichal Kazior2014-07-221-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It was possible to enter an endless loop while processing a single pci copy engine pipe. This could effectively render ath10k incapable of responding to any requests. An example case when this could happen is when firmware generates a lot of events, e.g. spectral scan phyerr via WMI. Reported-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| * | ath10k: workaround qos nullfunc bugMichal Kazior2014-07-221-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently fw/hw generates a corrupted QoS Control Field in Qos NullFunc frames. The only way to workaround this is to downgrade frames to NullFunc. This should be okay since powersave is done by fw/hw and these frames are only used for CQM purposes (e.g. from hostapd to check if station is still connected). This doesn't fix any user visible bug that I know of. It just prevents from sending out funky frames on the air. Reported-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| * | ath10k: simplify tx helpersMichal Kazior2014-07-223-32/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It always bugged me how tid is computed and stored in a temporary var before written to the control buffer. It was confusing and it made it difficult to work with tx helpers. While at it rename the qos workaround function as it was misleading - it's not a workaround but preparation for nwifi tx mode. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| * | ath10k: prevent some tx flushing failuresMichal Kazior2014-07-212-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Firmware could request inspection of some submitted tx requests. Since the callback wasn't implemented it was possible to bleed tx msdu_ids which could translate to tx flushing timeouts. There's nothing ath10k can do to help firmware with tx processing now so just report all tx frames as already inspected to prevent firmware from sending up inspection events and force it to report regular tx completion indications with discard status. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
| * | ath10k: workaround boot issues with KVM/PCI-passthroughMichal Kazior2014-07-211-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Apparently iomap writes that unmask CE irqs aren't propagated properly sometimes. Before failing try to poll for the control response message as it may have been delivered without an interrupt. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
* | | Merge tag 'nfc-next-3.17-1' of ↵John W. Linville2014-07-2915-9/+2021
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-next Samuel Ortiz <sameo@linux.intel.com> says: "NFC: 3.17 pull request This is the NFC pull request for 3.17. This is a rather quiet one, we have: - A new driver from ST Microelectronics for their NCI ST21NFCB, including device tree support. - p2p support for the ST21NFCA driver - A few fixes an enhancements for the NFC digital layer" Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | | NFC: st21nfca: Adding P2P support to st21nfca in Initiator & Target modeChristophe Ricard2014-07-235-3/+993
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for Initiator and Target mode with ISO18092 commands support: - ATR_REQ/ATR_RES - PSL_REQ/PSL_RES - DEP_REQ/DEP_RES Work based on net/nfc/digital_dep.c. st21nfca is using: - Gate reader F for P2P in initiator mode. - Gate card F for P2P in target mode. Felica tag and p2p are differentiated with NFCID2. When starting with 01FE it is acting in p2p mode. On complete_target_discovered on ST21NFCA_RF_READER_F_GATE supported_protocols is set to NFC_PROTO_NFC_DEP_MASK for P2P. Tested against: Nexus S, Galaxy S2, Galaxy S3, Galaxy S3 Mini, Nexus 4 & Nexus 5. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | NFC: st21nfca: Implement stop_poll HCI hookChristophe Ricard2014-07-231-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Send DM_DISCONNECT command to disconnect Terminal Host from the HCI network. - The persistent states of the terminal host pipes, including registry values, are not modifies. Therefore, there is no NVRAM update to disconnect the terminal host. - The terminal host RF card gates are disabled which means that there will be no event related to card RF gates until communication has been restored. - The terminal host RF reader request is reset so the RF reader polling for terminal host is disabled. To restore the communication, the terminal host can send any HCI command or event. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | NFC: st21nfca: Improve read length sequence for P2P mode.Christophe Ricard2014-07-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A DEP_RES with a SUPERVISOR PDU can be up to 16 bytes long. In order to avoid useless read during p2p, extend first read sequence to 16 and reduce third sequence to 12 to keep same total on the full sequence. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | NFC: st21nfca: Improved start of frame detectionChristophe Ricard2014-07-231-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A start of frame is 7E 00 not only 7E. Make sure the first read sequence is starting with 7E 00. For example: 7E FF FF FF FF is as a correct crc but it is a bad frame. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | NFC: st21nfca: Free buffer in case no data are retrieved.Christophe Ricard2014-07-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In case no data are retrieve through i2c or one specific case is not handled. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | NFC: st21nfcb: few code clean upChristophe Ricard2014-07-231-8/+8
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
| * | | NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chipChristophe Ricard2014-07-239-2/+1015
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add driver for STMicroelectronics ST21NFCB NFC controller. ST21NFCB is using NCI protocol and a proprietary low level transport protocol called NDLC used on top. NDLC: The protocol defines 2 types of frame: - One type carrying NCI data (referred as DATAFRAME frames). - One type carrying protocol information used for flow control and error control mechanisms (referred as SUPERVISOR frames). After each frame transmission to the NFC controller, the device host SHALL waitfor an ACK (SUPERVISOR frame) reception before sending a new frame. The NFC controller MAY send a frame at anytime to the device host. The NFC controller MAY send a specific WAIT supervisor frame to indicate to device host that a NCI data packet has been received but that it could take significant time before the NFC controller sends an ACK and thus allows next data reception. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
* | | Merge branch 'master' of ↵John W. Linville2014-07-251-0/+9
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/cfg.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | ath9k: fix aggregation session lockupFelix Fietkau2014-07-231-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an aggregation session fails, frames still end up in the driver queue with IEEE80211_TX_CTL_AMPDU set. This causes tx for the affected station/tid to stall, since ath_tx_get_tid_subframe returning packets to send. Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation session is running. Cc: stable@vger.kernel.org Reported-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * | Merge branch 'master' of ↵John W. Linville2014-07-222-9/+13
| |\ \ | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
* | | | b43: enable 5 GHz support for N-PHY devicesRafał Miłecki2014-07-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This has been tested on 14e4:4328 (BCM4321), 14e4:432b (BCM4322), 14e4:4353 (BCM43224) and 14e4:4359 (BCM43228) which is an almost complete list of 5 GHz capable device (only BCM43222 is missing). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | b43: register limited amount of 5G channels for BCM43228Rafał Miłecki2014-07-231-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We don't have all needed channel tables due to RE process for this device. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | b43: N-PHY: don't calculate values for TSSI if we can't transmitRafał Miłecki2014-07-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This process requires sending some sample tone, so make sure we're allowed to transmit first. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | b43: report correct rate to mac80211 for 5 GHz packetsRafał Miłecki2014-07-231-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | So far we were assuming only A-PHY supports 5 GHz. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | mac80211_hwsim: fix compiler warning on MIPSAndrew Bresticker2014-07-231-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dividend in do_div() is expected to be an unsigned 64-bit integer, which leads to the following warning when building for 32-bit MIPS: drivers/net/wireless/mac80211_hwsim.c: In function 'mac80211_hwsim_set_tsf': drivers/net/wireless/mac80211_hwsim.c:664:98: warning: comparison of distinct pointer types lacks a cast [enabled by default] data->bcn_delta = do_div(delta, bcn_int); Since we care about the signedness of delta when adjusting tsf_offset and bcm_delta, use the absolute value for the division and compare the two timestamps to determine the sign. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | b43: N-PHY: fix rev7+ typos at random placesRafał Miłecki2014-07-232-11/+12
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* | | | Merge branch 'for-john' of ↵John W. Linville2014-07-2321-395/+966
|\ \ \ \ | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
| * | | | iwlwifi: mvm: teardown TDLS peers during chan-switch and AP DCMArik Nemtsov2014-07-221-22/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DCM condition was not checked well for channel switch in both AP and station scenarios. Teardown was also not done for AP/GO DCM. Add the missing checks. Reported-by: Peer, Ilan <ilan.peer@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextEmmanuel Grumbach2014-07-22124-1569/+4827
| |\ \ \ \ | | | |_|/ | | |/| |
| * | | | Merge branch 'iwlwifi-fixes' into iwlwifi-nextEmmanuel Grumbach2014-07-222-9/+13
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Conflicts: drivers/net/wireless/iwlwifi/mvm/mac80211.c
| | * | | iwlwifi: mvm: pass beacons from foreign APsEliad Peller2014-07-211-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In AP mode, configure the fw to pass beacons from foreign APs, in order to be able to set the ht protection IE properly. Add the same filters in case of GO (which didn't have any configured filter_flags, probably by mistake) Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| | * | | iwlwifi: mvm: fix merge damageEmmanuel Grumbach2014-07-061-7/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: mvm: reset beacon filtering and BT Coex data upon FW restartEmmanuel Grumbach2014-07-221-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the firmware asserts, we restart the device and reset the relevant data we hold in the driver. BT Coex data was not reset and because of that, the driver wouldn't reconfigure the firmware properly after firmware restart. Same for beacon filtering. Fix that. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: mvm: update smart fifo / beacon filtering upon associationEran Harary2014-07-221-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When we associate, we may have heard the beacon before the association. In that case, BSS_CHANGED_BEACON_INFO will be set along with BSS_CHANGED_ASSOC in changes in bss_info_change. In this case, we didn't update the smart fifo nor beacon filtering leaving those two feature disabled. Signed-off-by: Eran Harary <eran.harary@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: dump CSRs to fw-error-dumpEmmanuel Grumbach2014-07-222-3/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the Control Status Registers to the firmware error dump infrastructure. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: dump periphery registers to fw-error-dumpEmmanuel Grumbach2014-07-222-1/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the fw-error-dump infrastructure to dump the periphery registers. Only certain ranges are readable, so dump only these. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: split fw-error-dump between transport and mvmEmmanuel Grumbach2014-07-226-39/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mvm op_mode won't allocate the buffer for the transport any more. The transport allocates its own buffer and mvm is in charge of splicing the buffers in the debugfs hook. This makes the repartition easier to handle. Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: fix inconsistency about power_save module parameterEmmanuel Grumbach2014-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | modinfo and kerneldoc disagreed on the meaning of this field. Reported-by: Andrea Oliveri <oliveriandrea@gmail.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: mvm: minor change in debug printEran Harary2014-07-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add OTP to the string: "can't parse empty OTP/NVM section" NVM usually refers to nvm_file while the problem can be in the OTP. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: mvm: wait for handlers when stopping scansEliad Peller2014-07-221-35/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent unified scan api change introduced issues when stopping ongoing scans, since both regular and sched scan now use same stopped notification. When issuing a new scan right after a running one, we get the "old" notification and handle it wrongly as notification for the current scan. Fix it by introducing a new function that make sure we consume the pending notifications before issuing a new scan. Signed-off-by: Eliad Peller <eliad@wizery.com> Reviewed-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: mvm: BT Coex - don't change AP SMPS modeEmmanuel Grumbach2014-07-222-23/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Leave it to default instead - regardless of the BT activity. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: mvm: BT Coex - fix the ACK / CTS kill maskEmmanuel Grumbach2014-07-225-193/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to new requirements, the ACK / CTS kill mask is not related to reduced TX power anymore. This allows to remove the code that tracked reduced TX power enablement across different interfaces. The ACK / CTS kill mask is now fetch from a table. It depends on the Activity grading (activity from BT) and on the Look Up Table (LUT) type. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | iwlwifi: mvm: add Aux ROC request/response flowAriej Marjieh2014-07-224-16/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Remain On Channel framework added to the firmare is a bit like time events. It allows the driver to request the firmware to be on a certain channel for a certain time. Unlike the time events, the ROC infrastructure doesn't need a MAC context in the firmware - it uses a generic context called "auxiliary framework". This is useful for any offchannel activity that is not bound to a specific MAC. The flow is synchronized much like with time events: 1) The driver receives an action frame from the wpa_supplicant via nl80211 that requests to be sent offchannel. 2) The driver sends an Aux ROC command (0x53) to the firmware. 3) The firmware responds with the unique id of the time event. 4) When time event starts, the driver puts the frame in the Aux queue. Special care needs to be taken when the time events ends: the queue needs to be cleaned-up. Signed-off-by: Ariej Marjieh <ariej.marjieh@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-09 02:37:49 +0100