summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drivers/net/irda/sa1100_ir.c: fix error return codePeter Senna Tschudin2012-10-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function sa1100_irda_probe() return 0 for success and negative value for most of its internal tests failures. There is one exception that is error case going to err_mem_4:. For this error case, the function abort its success execution path, but returns non negative value, making it difficult for a caller function to notice the error. This patch fixes the error case that do not return negative value. This was found by Coccinelle, but the code change was made by hand. This patch is not robot generated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/irda/pxaficp_ir.c: fix error return codePeter Senna Tschudin2012-10-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function pxa_irda_probe() return 0 for success and negative value for most of its internal tests failures. There is one exception that is error case going to err_mem_3:. For this error case, the function abort its success execution path, but returns non negative value, making it difficult for a caller function to notice the error. This patch fixes the error case that do not return negative value. This was found by Coccinelle, but the code change was made by hand. This patch is not robot generated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/irda/mcs7780.c: fix error return codePeter Senna Tschudin2012-10-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function mcs_probe() return 0 for success and negative value for most of its internal tests failures. There is one exception that is error case going to error2:. For this error case, the function abort its success execution path, but returns non negative value, making it difficult for a caller function to notice the error. This patch fixes the error case that do not return negative value. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/irda/irtty-sir.c: fix error return codePeter Senna Tschudin2012-10-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function irtty_open() return 0 for success and negative value for most of its internal tests failures. There is one exception that is error case going to out_put:. For this error case, the function abort its success execution path, but returns non negative value, making it difficult for a caller function to notice the error. This patch fixes the error case that do not return negative value. This was found by Coccinelle, but the code change was made by hand. This patch is not robot generated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ethernet/sis/sis900.c: fix error return codePeter Senna Tschudin2012-10-071-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function sis900_probe() return 0 for success and negative value for most of its internal tests failures. There is one exception that is error case going to err_out_cleardev:. Fore this error case, the function abort its success execution path, but returns non negative value, making it difficult for a caller function to notice the error. This patch fixes the error case that do not return negative value. This was found by Coccinelle, but the code change was made by hand. This patch is not robot generated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ethernet/natsemi/natsemi.c: fix error return codePeter Senna Tschudin2012-10-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function natsemi_probe1() return 0 for success and negative value for most of its internal tests failures. There is one exception that is error case going to err_create_file:. Fore this error case the function abort its success execution path, but returns non negative value, making it difficult for a caller function to notice the error. This patch fixes the error case that do not return negative value. This was found by Coccinelle, but the code change was made by hand. This patch is not robot generated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/ethernet/dec/tulip/dmfe.c: fix error return codePeter Senna Tschudin2012-10-071-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The function dmfe_init_one() return 0 for success and negative value for most of its internal tests failures. There are three exceptions that are error cases going to err_out_*:. Fore this three cases the function abort its success execution path, but returns non negative value, making it dificult for a caller function to notice the error. This patch fixes the error cases that do not return negative values. This was found by Coccinelle, but the code change was made by hand. This patch is not robot generated. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove skb recyclingEric Dumazet2012-10-078-102/+16
| | | | | | | | | | | | | | | | | | | | | | | Over time, skb recycling infrastructure got litle interest and many bugs. Generic rx path skb allocation is now using page fragments for efficient GRO / TCP coalescing, and recyling a tx skb for rx path is not worth the pain. Last identified bug is that fat skbs can be recycled and it can endup using high order pages after few iterations. With help from Maxime Bizon, who pointed out that commit 87151b8689d (net: allow pskb_expand_head() to get maximum tailroom) introduced this regression for recycled skbs. Instead of fixing this bug, lets remove skb recycling. Drivers wanting really hot skbs should use build_skb() anyway, to allocate/populate sk_buff right before netif_receive_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* infiniband: pass rdma_cm module to netlink_dump_startGao feng2012-10-072-1/+3
| | | | | | | | | set netlink_dump_control.module to avoid panic. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Cc: Roland Dreier <roland@kernel.org> Cc: Sean Hefty <sean.hefty@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'stable/for-linus-3.7-arm-tag' of ↵Linus Torvalds2012-10-075-6/+25
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull ADM Xen support from Konrad Rzeszutek Wilk: Features: * Allow a Linux guest to boot as initial domain and as normal guests on Xen on ARM (specifically ARMv7 with virtualized extensions). PV console, block and network frontend/backends are working. Bug-fixes: * Fix compile linux-next fallout. * Fix PVHVM bootup crashing. The Xen-unstable hypervisor (so will be 4.3 in a ~6 months), supports ARMv7 platforms. The goal in implementing this architecture is to exploit the hardware as much as possible. That means use as little as possible of PV operations (so no PV MMU) - and use existing PV drivers for I/Os (network, block, console, etc). This is similar to how PVHVM guests operate in X86 platform nowadays - except that on ARM there is no need for QEMU. The end result is that we share a lot of the generic Xen drivers and infrastructure. Details on how to compile/boot/etc are available at this Wiki: http://wiki.xen.org/wiki/Xen_ARMv7_with_Virtualization_Extensions and this blog has links to a technical discussion/presentations on the overall architecture: http://blog.xen.org/index.php/2012/09/21/xensummit-sessions-new-pvh-virtualisation-mode-for-arm-cortex-a15arm-servers-and-x86/ * tag 'stable/for-linus-3.7-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (21 commits) xen/xen_initial_domain: check that xen_start_info is initialized xen: mark xen_init_IRQ __init xen/Makefile: fix dom-y build arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls ...
| * xen: mark xen_init_IRQ __initStefano Stabellini2012-10-021-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | xen_init_IRQ should be marked __init because it calls other functions marked __init and is always called by functions marked __init (on both x86 and arm). Also remove the unused EXPORT_SYMBOL_GPL(xen_init_IRQ). Both changes were introduced by "xen/arm: receive Xen events on ARM". Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| * xen/Makefile: fix dom-y buildStefano Stabellini2012-10-021-1/+1
| | | | | | | | | | | | | | | | We need to add $(dom0-y) to obj-$(CONFIG_XEN_DOM0) after dom0-y is defined otherwise we end up adding nothing. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| * Merge branch 'xenarm-for-linus' of ↵Konrad Rzeszutek Wilk2012-09-265-7/+26
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://xenbits.xen.org/people/sstabellini/linux-pvhvm into stable/for-linus-3.7 * 'xenarm-for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: arm: introduce a DTS for Xen unprivileged virtual machines MAINTAINERS: add myself as Xen ARM maintainer xen/arm: compile netback xen/arm: compile blkfront and blkback xen/arm: implement alloc/free_xenballooned_pages with alloc_pages/kfree xen/arm: receive Xen events on ARM xen/arm: initialize grant_table on ARM xen/arm: get privilege status xen/arm: introduce CONFIG_XEN on ARM xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARM xen/arm: Introduce xen_ulong_t for unsigned long xen/arm: Xen detection and shared_info page mapping docs: Xen ARM DT bindings xen/arm: empty implementation of grant_table arch specific functions xen/arm: sync_bitops xen/arm: page.h definitions xen/arm: hypercalls arm: initial Xen support Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| | * xen/arm: compile netbackStefano Stabellini2012-08-082-0/+2
| | | | | | | | | | | | | | | | | | Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| | * xen/arm: compile blkfront and blkbackStefano Stabellini2012-08-081-0/+1
| | | | | | | | | | | | | | | | | | Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| | * xen/arm: receive Xen events on ARMStefano Stabellini2012-09-141-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Compile events.c on ARM. Parse, map and enable the IRQ to get event notifications from the device tree (node "/xen"). Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
| | * xen: do not compile manage, balloon, pci, acpi, pcpu and cpu_hotplug on ARMStefano Stabellini2012-09-131-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes in v4: - compile pcpu only on x86; - use "+=" instead of ":=" for dom0- targets. Changes in v2: - make pci.o depend on CONFIG_PCI and acpi.o depend on CONFIG_ACPI. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
* | | Merge branch 'next' of ↵Linus Torvalds2012-10-0520-168/+229
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
| * | | driver/mtd:IFC NAND:Initialise internal SRAM before any writePrabhakar Kushwaha2012-09-271-1/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IFC-1.1.0 uses 28nm techenology for SRAM. This tech has known limitaion for SRAM i.e. "byte select" is not supported. Hence Read Modify Write is implemented in IFC for any "system side write" into sram buffer. Reading an uninitialized memory results in ECC Error from sram wrapper. Hence we must initialize/prefill SRAM buffer by any data before writing anything in SRAM from system side. To initialize SRAM user can use "READID" NAND command with read bytes equal to SRAM size. It will be a one time activity post boot. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | Merge remote-tracking branch 'kumar/next' into nextBenjamin Herrenschmidt2012-09-181-31/+12
| |\ \ \
| | * | | powerpc/fsl-pci: Unify pci/pcie initialization codeJia Hongtao2012-09-121-31/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We unified the Freescale pci/pcie initialization by changing the fsl_pci to a platform driver. In previous PCI code architecture the initialization routine is called at board_setup_arch stage. Now the initialization is done in probe function which is architectural better. Also It's convenient for adding PM support for PCI controller in later patch. Now we registered pci controllers as platform devices. So we combine two initialization code as one platform driver. Signed-off-by: Jia Hongtao <B38951@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | | powerpc/eeh: Remove EEH PE for normal PCI hotplugGavin Shan2012-09-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Function eeh_rmv_from_parent_pe() could be called by the path of either normal PCI hotplug, or EEH recovery. For the former case, we need purge the corresponding PE on removal of the associated PE bus. The patch tries to cover that by passing more information to function pcibios_remove_pci_devices() so that we know if the corresponding PE needs to be purged or be marked as "invalid". Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | Merge remote-tracking branch 'pci/pci/gavin-window-alignment' into nextBenjamin Herrenschmidt2012-09-1778-900/+847
| |\ \ \ \ | | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | Merge Gavin patches from the PCI tree as subsequent powerpc patches are going to depend on them Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| | * | | Merge commit 'v3.6-rc5' into pci/gavin-window-alignmentBjorn Helgaas2012-09-13464-2743/+6077
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
| * | \ \ \ Merge branch 'merge' into nextBenjamin Herrenschmidt2012-09-07434-2643/+5823
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | Brings in various bug fixes from 3.6-rcX
| * | | | | | powerpc: Rename 64-bit PVR constants to PVR_fooMichael Ellerman2012-09-051-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We have an old FIXME in reg.h which points out that we should standardise on PVR_foo for our PVR #defines. Currently we use PVR_ on 32-bit and PV_ on 64-bit. So do that rename and remove the FIXME. Seeing as we're touching all but one usage of __is_processor(), rename it to something less ugly and more indicative of what it does, which is simply to check the PVR version. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | | | hvc_vio: Improve registration of udbg backendBenjamin Herrenschmidt2012-09-051-53/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pseries hvterm driver only registers a udbg backend (for xmon and other low level debugging mechanisms) when hvc0 is recognized as the firmware console at boot time, not if it's detected later on, for example because the firmware is using a graphics card. This can make debugging challenging especially under X11, and there's really no good reason for that limitation, so let's hookup udbg whenever hvc0 is detected instead. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | | | hvc_console: Better kernel console supportBenjamin Herrenschmidt2012-09-051-7/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | hvc_console has two methods to instanciate the consoles. hvc_instanciate is meant to be called at early boot, while hvc_alloc is called for more dynamically probed objects. Currently, it only deals with adding kernel consoles in the former case, which means for example that if a console only uses dynamic probing, it will never be usable as a kernel console even when specifying console=hvc0 explicitly, which could be considered annoying... More specifically, on pseries, we only do the early instanciate for the console currently used by the firmware, so if you have your firmware configured to go to a video card, for example, you cannot get your kernel console, oops messages, etc... on your serial port or hypervisor console, which would be handy to deal with oopses. This fixes it by checking if hvc_console.flags & CON_ENABLED is set when registering a new dynamic console, and if not, redo the index check and re-register the console if the index matches, allowing console=hvcN to work. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | | | powerpc/ps3: Replace virt_to_abs() with __pa()Michael Ellerman2012-09-051-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | virt_to_abs() is just a wrapper around __pa(), call __pa() directly. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | | | ehea: Remove uses of virt_to_abs() and abs_to_virt()Michael Ellerman2012-09-053-14/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | abs_to_virt() simply calls __va() and we'd like to get rid of it, so replace all abs_to_virt() uses with __va(). Similarly virt_to_abs() just calls __pa(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | | | drivers/macintosh/smu.c: Replace abs_to_virt() with __va()Michael Ellerman2012-09-051-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | abs_to_virt() is just a wrapper around __va(), call __va() directly. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | | | IB/ehca: Remove uses of virt_to_abs() and abs_to_virt()Michael Ellerman2012-09-058-22/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | abs_to_virt() simply calls __va() and we'd like to get rid of it, so replace all abs_to_virt() uses with __va(). __va() returns void *, so when assigning to a pointer there's no need to cast. Similarly virt_to_abs() just calls __pa(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | | | IB/ehca: Don't use phys_to_abs(), it's a nopMichael Ellerman2012-09-051-19/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit f5339277 phys_to_abs() is 100% a nop, so just remove it. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
| * | | | | | powerpc/crypto: Remove users of virt_to_abs() and phys_to_abs() in nx crypto ↵Michael Ellerman2012-09-051-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | driver phys_to_abs() is a nop, don't use it. virt_to_abs() is just a wrapper around __pa(), call __pa() directly. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
* | | | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2012-10-0518-148/+176
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking changes from David Miller: "The most important bit in here is the fix for input route caching from Eric Dumazet, it's a shame we couldn't fully analyze this in time for 3.6 as it's a 3.6 regression introduced by the routing cache removal. Anyways, will send quickly to -stable after you pull this in. Other changes of note: 1) Fix lockdep splats in team and bonding, from Eric Dumazet. 2) IPV6 adds link local route even when there is no link local address, from Nicolas Dichtel. 3) Fix ixgbe PTP implementation, from Jacob Keller. 4) Fix excessive stack usage in cxgb4 driver, from Vipul Pandya. 5) MAC length computed improperly in VLAN demux, from Antonio Quartulli." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ipv6: release reference of ip6_null_entry's dst entry in __ip6_del_rt Remove noisy printks from llcp_sock_connect tipc: prevent dropped connections due to rcvbuf overflow silence some noisy printks in irda team: set qdisc_tx_busylock to avoid LOCKDEP splat bonding: set qdisc_tx_busylock to avoid LOCKDEP splat sctp: check src addr when processing SACK to update transport state sctp: fix a typo in prototype of __sctp_rcv_lookup() ipv4: add a fib_type to fib_info can: mpc5xxx_can: fix section type conflict can: peak_pcmcia: fix error return code can: peak_pci: fix error return code cxgb4: Fix build error due to missing linux/vmalloc.h include. bnx2x: fix ring size for 10G functions cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params() ixgbe: add support for X540-AT1 ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bit ixgbe: fix PTP ethtool timestamping function ixgbe: (PTP) Fix PPS interrupt code ixgbe: Fix PTP X540 SDP alignment code for PPS signal ...
| * \ \ \ \ \ \ Merge branch 'fixes-for-3.7' of git://gitorious.org/linux-can/linux-canDavid S. Miller2012-10-043-5/+9
| |\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Marc Kleine-Budde says: ==================== here are three patches for the v3.7 release cycle. Two patches by Peter Senna Tschudin which fix the return values in the error handling path of the sja1000 peak pci and pcmcia driver. And one patch by myself that fixes a compile breakage of the mpc5xxx_can mscan driver due to a section conflict. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | | | can: mpc5xxx_can: fix section type conflictMarc Kleine-Budde2012-10-041-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit: 6d99c4c can: mpc5xxx_can: make data used as *of_device_id.data const both "struct mpc5xxx_can_data mpc5200_can_data" and "mpc5121_can_data" are marked as "const" but also as "__devinitdata". This leads to the following compile error: drivers/net/can/mscan/mpc5xxx_can.c:383: error: mpc5200_can_data causes a section type conflict drivers/net/can/mscan/mpc5xxx_can.c:383: error: mpc5200_can_data causes a section type conflict drivers/net/can/mscan/mpc5xxx_can.c:388: error: mpc5121_can_data causes a section type conflict drivers/net/can/mscan/mpc5xxx_can.c:388: error: mpc5121_can_data causes a section type conflict This patch changes the "__devinitdata" to "__devinitconst" and marks the "struct of_device_id mpc5xxx_can_table" as "const" and "__devinitconst", too. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * | | | | | | can: peak_pcmcia: fix error return codePeter Senna Tschudin2012-10-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| | * | | | | | | can: peak_pci: fix error return codePeter Senna Tschudin2012-10-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
| * | | | | | | | team: set qdisc_tx_busylock to avoid LOCKDEP splatEric Dumazet2012-10-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a qdisc is installed on a team device, its possible to get a lockdep splat under stress, because nested dev_queue_xmit() can lock busylock a second time (on a different device, so its a false positive) Avoid this problem using a distinct lock_class_key for team devices. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jpirko@redhat.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | | bonding: set qdisc_tx_busylock to avoid LOCKDEP splatEric Dumazet2012-10-041-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a qdisc is installed on a bonding device, its possible to get following lockdep splat under stress : ============================================= [ INFO: possible recursive locking detected ] 3.6.0+ #211 Not tainted --------------------------------------------- ping/4876 is trying to acquire lock: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 but task is already holding lock: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(dev->qdisc_tx_busylock ?: &qdisc_tx_busylock); lock(dev->qdisc_tx_busylock ?: &qdisc_tx_busylock); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by ping/4876: #0: (sk_lock-AF_INET){+.+.+.}, at: [<ffffffff815e5030>] raw_sendmsg+0x600/0xc30 #1: (rcu_read_lock_bh){.+....}, at: [<ffffffff815ba4bd>] ip_finish_output+0x12d/0x870 #2: (rcu_read_lock_bh){.+....}, at: [<ffffffff8157a0b0>] dev_queue_xmit+0x0/0x830 #3: (dev->qdisc_tx_busylock ?: &qdisc_tx_busylock){+.-...}, at: [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 #4: (&bond->lock){++.?..}, at: [<ffffffffa02128c1>] bond_start_xmit+0x31/0x4b0 [bonding] #5: (rcu_read_lock_bh){.+....}, at: [<ffffffff8157a0b0>] dev_queue_xmit+0x0/0x830 stack backtrace: Pid: 4876, comm: ping Not tainted 3.6.0+ #211 Call Trace: [<ffffffff810a0145>] __lock_acquire+0x715/0x1b80 [<ffffffff810a256b>] ? mark_held_locks+0x9b/0x100 [<ffffffff810a1bf2>] lock_acquire+0x92/0x1d0 [<ffffffff8157a191>] ? dev_queue_xmit+0xe1/0x830 [<ffffffff81726b7c>] _raw_spin_lock+0x3c/0x50 [<ffffffff8157a191>] ? dev_queue_xmit+0xe1/0x830 [<ffffffff8106264d>] ? rcu_read_lock_bh_held+0x5d/0x90 [<ffffffff8157a191>] dev_queue_xmit+0xe1/0x830 [<ffffffff8157a0b0>] ? netdev_pick_tx+0x570/0x570 [<ffffffffa0212a6a>] bond_start_xmit+0x1da/0x4b0 [bonding] [<ffffffff815796d0>] dev_hard_start_xmit+0x240/0x6b0 [<ffffffff81597c6e>] sch_direct_xmit+0xfe/0x2a0 [<ffffffff8157a249>] dev_queue_xmit+0x199/0x830 [<ffffffff8157a0b0>] ? netdev_pick_tx+0x570/0x570 [<ffffffff815ba96f>] ip_finish_output+0x5df/0x870 [<ffffffff815ba4bd>] ? ip_finish_output+0x12d/0x870 [<ffffffff815bb964>] ip_output+0x54/0xf0 [<ffffffff815bad48>] ip_local_out+0x28/0x90 [<ffffffff815bc444>] ip_send_skb+0x14/0x50 [<ffffffff815bc4b2>] ip_push_pending_frames+0x32/0x40 [<ffffffff815e536a>] raw_sendmsg+0x93a/0xc30 [<ffffffff8128d570>] ? selinux_file_send_sigiotask+0x1f0/0x1f0 [<ffffffff8109ddb4>] ? __lock_is_held+0x54/0x80 [<ffffffff815f6730>] ? inet_recvmsg+0x220/0x220 [<ffffffff8109ddb4>] ? __lock_is_held+0x54/0x80 [<ffffffff815f6855>] inet_sendmsg+0x125/0x240 [<ffffffff815f6730>] ? inet_recvmsg+0x220/0x220 [<ffffffff8155cddb>] sock_sendmsg+0xab/0xe0 [<ffffffff810a1650>] ? lock_release_non_nested+0xa0/0x2e0 [<ffffffff810a1650>] ? lock_release_non_nested+0xa0/0x2e0 [<ffffffff8155d18c>] __sys_sendmsg+0x37c/0x390 [<ffffffff81195b2a>] ? fsnotify+0x2ca/0x7e0 [<ffffffff811958e8>] ? fsnotify+0x88/0x7e0 [<ffffffff81361f36>] ? put_ldisc+0x56/0xd0 [<ffffffff8116f98a>] ? fget_light+0x3da/0x510 [<ffffffff8155f6c4>] sys_sendmsg+0x44/0x80 [<ffffffff8172fc22>] system_call_fastpath+0x16/0x1b Avoid this problem using a distinct lock_class_key for bonding devices. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | | Merge branch 'master' of ↵David S. Miller2012-10-046-114/+112
| |\ \ \ \ \ \ \ \ | | |/ / / / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== This series contains fixes/updates to ixgbe only. There are three PTP fixes, polling loop fix and the addition of a device id (X540-AT1). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | | | | | | ixgbe: add support for X540-AT1joshua.a.hay@intel.com2012-10-033-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device support for Ethernet Controller X540-AT1. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * | | | | | | ixgbe: fix poll loop for FDIRCTRL.INIT_DONE bitEmil Tantilov2012-10-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The loop in ixgbe_reinit_fdir_tables_82599() only polls for up to 100us resulting in failures to update the FDIR filter table at 1Gbps and 10Gbps when under load. The poll times for FDIRCTRL.INIT_DONE are 55us, 550us and 5.5ms for 10Gbps, 1Gbps and 100Mbps respectively. This patch sets the wait time to be the same as in ixgbe_fdir_enable_82599() Reported-by: Bhushan <shashi-sm@users.sf.net> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * | | | | | | ixgbe: fix PTP ethtool timestamping functionJacob Keller2012-10-031-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a development issue that occurred due to invalid modes reported in the ethtool get_ts_info function. The issue is resolved by removing unsupported modes from the Rx supported list. CC: stable <stable@vger.kernel.org> [3.5] Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * | | | | | | ixgbe: (PTP) Fix PPS interrupt codeJacob Keller2012-10-032-61/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver was enabling PPS interrupt even when user wasn't enabling it via the ptp core. This patch fixes the PPS so that it is only enabled explicitly, and moves the interrupt enabling code into the correct location in the driver Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Stable <stable@vger.kernel.org> [3.5] Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| | * | | | | | | ixgbe: Fix PTP X540 SDP alignment code for PPS signalJacob Keller2012-10-031-89/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a bug in the method used for calculating the trigger alignment for SDP0 when enabling a PPS output on the X540. The alignment math wasn't properly taking into account the overflow cyclecounter, and was misaligning the pin triggers so that two X540 devices synced properly had mis-aligned SDP pins. This patch fixes the math to calculate the correct seconds alignment for the PPS signal. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * | | | | | | | cxgb4: Fix build error due to missing linux/vmalloc.h include.David S. Miller2012-10-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | | bnx2x: fix ring size for 10G functionsYuval Mintz2012-10-031-7/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d760fc37b0f74502b3f748951f22c6683b079a8e caused 1G functions to allocate rx rings which were 1/10 of the size of 10G functions' rx rings. However, it also caused 10G functions on 5771x boards to allocate small rings, which limits their possible (default) rx throughput. This patch causes all 10G functions to use rings of intended length by default. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | | | | cxgb4: Dynamically allocate memory in t4_memory_rw() and get_vpd_params()Vipul Pandya2012-10-031-13/+30
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes memory allocation to reduce stack footprint Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-10 17:29:54 +0100