summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* pcmcia: Fix up legacy driver IRQsAlan Cox2008-09-248-8/+8
| | | | | | | | | | | | | | | The PCMCIA layer obsoleted asking for per device private IRQS some years ago and all the drivers by inspection correctly use dev_id and handle shared interrupts [they get em anyway in most PCI bridged PCMCIA/Cardbus] so can be adjusted. This gets rid of the various bugs reported where there is spewage about conflicting irq types and sometimes the driver won't load. (Note I don't have all of these devices to test each one beyond by inspection) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* rt2x00: Fix HW crypto key handlingIvo van Doorn2008-09-243-5/+6
| | | | | | | | | | | | | When a crypto key is being removed, rt2x00mac should not reset the key->hw_key_idx value because that will prevent the driver from removing the correct key from the hardware. Furthermore ffz() starts counting at 0 instead of 1, so we don't need to substract 1 from the resulting value. Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Add a few comments about mibeventsLuis R. Rodriguez2008-09-241-2/+16
| | | | | Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* mac80211: clean up rate control APIJohannes Berg2008-09-246-304/+146
| | | | | | | | | | | | | | | | | | Long awaited, hard work. This patch totally cleans up the rate control API to remove the requirement to include internal headers outside of net/mac80211/. There's one internal use in the PID algorithm left for mesh networking, we'll have to figure out a way to clean that one up and decide how to do the peer link evaluation, possibly independent of the rate control algorithm or via new API. Additionally, ath9k is left using the cross-inclusion hack for now, we will add new API where necessary to make this work properly, but right now I'm not expert enough to do it. It's still off better than before. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix TSF Adjust usageSujith2008-09-241-1/+2
| | | | | | | | | TSF adjust is needed only for AP mode when staggered beacons are used. Since we support only a single interface in IBSS mode, disable setting the TSF adjust register. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Fix nexttbtt calculationSujith2008-09-242-3/+7
| | | | | | | | | nexttbtt has to be obtained from the timestamp of the beacon obtained from mac80211. Fix this. And <asm/unaligned.h> is not needed anymore. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath9k: Whitespace cleanupSujith2008-09-241-76/+60
| | | | | | | Also, remove comments that are not relevant anymore. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: remove HT flags from RXON when not in HT anymoreEmmanuel Grumbach2008-09-242-3/+8
| | | | | | | | | | | | | | | | This patch removes the HT flags from RXON when moving from HT to legacy. This avoids keeping those flags set and possibly miss configuring firmware. If we are configured in HT, fat channel: channel 1 above, and move later to legacy channel 11, we need to clear the FAT channel control flags in RXON. If we don't, the firmware will understand this as channel 11 above which is not possible due to regulatory constraints, leading to firmware crash. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* libertas: Reduce the WPA key installation time (fixups)Javier Cardona2008-09-242-3/+24
| | | | | | | | | This patch addresses comments from Dan Williams about the patch committed as "libertas: Reduce the WPA key installation time." Signed-off-by: Javier Cardona <javier@cozybit.com> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* ath5k: Fix bad udelay calls on AR5210 codeNick Kossifidis2008-09-243-10/+14
| | | | | | | | | | * Fix bad udelay calls (using > 2000us) in AR5210 code and clean up some bits on nic_reset (AR5210 support is still in bad shape) Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: make PS use named constantsTomas Winkler2008-09-241-7/+12
| | | | | | | | | This patch adds named constants for configuring MIMO power save chain settings. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* iwlwifi: don't delay scan in IBSS modeTomas Winkler2008-09-241-2/+4
| | | | | | | | | Scan need to be delayed only after association to allow EAPOL exchange. We don't need the delay for IBSS mode. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* b43: Issue warning when RFKILL_INPUT is not enabledLarry Finger2008-09-241-0/+5
| | | | | | | | | If the system is misconfigured with CONFIG_RFKILL set but CONFIG_RFKILL_INPUT not set, the built-in radio LEDs will not work. In the current code, no warning is issued. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* wireless: Read scan flags correctly on x86-64David Kilroy2008-09-244-5/+4
| | | | | | | | | | | | | | | | | | | The SIOCSIWSCAN handler is passed data in an iw_point structure. Some drivers erronously use an iw_param instead. On 32 bit architectures the difference isn't noticed as the flags parameter tends to be the only one used by scan handlers and is at the same offset. On 64 bit architectures the pointer in the iw_point structure means the flag parameter is at different offsets in these structures. Thanks to Jean Tourrilhes for tracking this down for orinoco, and Pavel Roskin for confirming the fix and identifying other suspect handlers. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
* aoe: Fix OOPS after SKB queue changes.David S. Miller2008-09-241-1/+3
| | | | | | | | | | | | | Reported by Thomas Graf. If we don't unlink the SKB from the queue when we send it out in aoenet_xmit(), dev_hard_start_xmit() will see skb->next as non-NULL and interpret this to mean the SKB is part of a GSO segment list. Add __skb_unlink() call to fix that. Signed-off-by: David S. Miller <davem@davemloft.net>
* ppp_generic: Use skb_peek() in ppp_receive_mp_frame().David S. Miller2008-09-231-3/+5
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* usbatm: Use skb_queue_walk_safe() instead of by-hand implementation.David S. Miller2008-09-231-3/+2
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* zd1211: Use skb_queue_walk() instead of by-hand implementation.David S. Miller2008-09-231-1/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* de4x5: Use skb_queue_head instead of by-hand implementation.David S. Miller2008-09-231-30/+8
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* usbnet: Use skb_queue_walk_safe() instead of by-hand implementation.David S. Miller2008-09-231-2/+1
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* cassini: use request_firmwareJaswinder Singh2008-09-232-1523/+53
| | | | | | | | | | | Firmware blob looks like this... __le16 load_address unsigned char data[] [akpm@linux-foundation.org: include vmalloc.h] Signed-off-by: Jaswinder Singh <jaswinder@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/net/wan: Use DIV_ROUND_UPJulia Lawall2008-09-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/atm: Use DIV_ROUND_UPJulia Lawall2008-09-233-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. In the case of the file drivers/atm/eni.c, I am a little bit suspicious of the -1 at the end of the affected expression. Please check that that is what is wanted. An extract of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ expression n,d; @@ ( - (n + d - 1) / d + DIV_ROUND_UP(n,d) | - (n + (d - 1)) / d + DIV_ROUND_UP(n,d) ) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP((n),d) + DIV_ROUND_UP(n,d) @depends on haskernel@ expression n,d; @@ - DIV_ROUND_UP(n,(d)) + DIV_ROUND_UP(n,d) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* hci_usb: replace mb with smp_mbMing Lei2008-09-231-5/+5
| | | | | | | | | | smp_mb is enough for ordering memory operations among processors,and mb is more expensive than smp_mb for UP machine, so replace it with smp_mb(). Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* irda: follow lspci device/vendor styleBjorn Helgaas2008-09-231-1/+1
| | | | | | | | | Use "[%04x:%04x]" for PCI vendor/device IDs to follow the format used by lspci(8). Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* mISDN: misc timerdev fixesAndi Kleen2008-09-231-16/+6
| | | | | | | | | | - Remove noop VFS stubs. The VFS does that on a NULL pointer anyways. - Fix timer handler prototype to be correct - Comment ugly SMP race I didn't fix. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* mISDN: annotate iomem pointer and add staticsHarvey Harrison2008-09-231-7/+7
| | | | | | Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* mISDN: endian annotations for struct ztHarvey Harrison2008-09-232-7/+6
| | | | | | | | | Found two possible bugs where the z1 value was used directly without byteswapping. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers/isdn/capi/kcapi.c: Adjust error handling code involving capi_ctr_putJulia Lawall2008-09-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After calling capi_ctr_get, error handling code should call capi_ctr_put. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S; position p1,p2,p3; @@ ( if ((x = capi_ctr_get@p1(...)) == NULL || ...) S | x = capi_ctr_get@p1(...) ... when != x if (x == NULL || ...) S ) <... if@p3 (...) { ... when != capi_ctr_put(x) when != if (x) { ... capi_ctr_put(x); ...} return@p2 ...; } ...> ( return x; | return 0; | x = E | E = x | capi_ctr_put(x) ) @exists@ position r.p1,r.p2,r.p3; expression x; int ret != 0; statement S; @@ * x = capi_ctr_get@p1(...) <... * if@p3 (...) S ...> * return@p2 \(NULL\|ret\); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb3: Use SKB list interfaces instead of home-grown implementation.David S. Miller2008-09-224-48/+42
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* isdn: isdn_ppp: Use SKB list facilities instead of home-grown implementation.David S. Miller2008-09-221-163/+189
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* bluetooth: hci_bcsp: Use SKB list interfaces instead of home-grown stuff.David S. Miller2008-09-221-9/+9
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* aoe: Use SKB interfaces for list management instead of home-grown stuff.David S. Miller2008-09-227-76/+56
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: idt77252: Use generic SKB queue management instead of home-grown scheme.David S. Miller2008-09-222-26/+10
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* net: Remove __skb_insert() calls outside of skbuff internals.David S. Miller2008-09-223-3/+3
| | | | | | | This minor cleanup simplifies later changes which will convert struct sk_buff and friends over to using struct list_head. Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2008-09-2062-1396/+1588
|\ | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
| * libertas: correct "limited range of data type" warningJohn W. Linville2008-09-151-3/+2
| | | | | | | | | | | | | | | | | | CC [M] drivers/net/wireless/libertas/wext.o drivers/net/wireless/libertas/wext.c: In function ‘lbs_get_rts’: drivers/net/wireless/libertas/wext.c:307: warning: comparison is always false due to limited range of data type Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * orinoco: Fix compile warningsDavid Kilroy2008-09-151-7/+7
| | | | | | | | | | | | | | | | | | Use min_t to avoid warnings when the typesafe version is used. Explicitly cast u64s to unsigned long long when being passed to printk. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211 hwsim: make radio list dynamicJohannes Berg2008-09-151-41/+45
| | | | | | | | | | | | | | | | | | This paves the way for dynamic radio additions while the module is loaded. Also restrict the number of radios to 100 because creating that many already takes forever. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: fix virtual interfaces vs. injectionJohannes Berg2008-09-152-9/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, virtual interface pointers passed to drivers might be from monitor interfaces and as such completely uninitialised because we do not tell the driver about monitor interfaces when those are created. Instead of passing them, we should therefore indicate to the driver that there is no information; do that by passing a NULL value and adjust drivers to cope with it. As a result, some mac80211 API functions also need to cope with a NULL vif pointer so drivers can still call them unconditionally. Also, when injecting frames we really don't want to pass NULL all the time, if we know we are the source address of a frame and have a local interface for that address, we can to use that interface. This also helps with processing the frame correctly for that interface which will help the 802.11w implementation. It's not entirely correct for VLANs or WDS interfaces because there the MAC address isn't unique, but it's already a lot better than what we do now. Finally, when injecting without a matching local interface, don't assign sequence numbers at all. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * libertas: Reduce the WPA key installation time.Javier Cardona2008-09-151-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WPA requires that the PTK is installed immediately after the 4-way handshake in order to properly decrypt the subsequent incoming EAPOL-GTK frame. If the PTK is not enabled by the time the EAPOL-GTK frame arrives, the frame is dropped and the supplicant does not receive the group key. This will happen with fast Access Points that send the EAPOL-GTK frame before the suplicant has successfully installed and enabled the PTK. To mitigate this situation, this patch simplifies and accelerates the SIOCSIWENCODEEXT execution. This patch resolves OLPC ticket 7825 (http://dev.laptop.org/ticket/7825) Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * b43: fix QoS parameters initializationLorenzo Nava2008-09-151-1/+1
| | | | | | | | | | | | | | | | This fixes the initialization of QoS parameters. Reported-by: Lorenzo Nava, Francesco Gringoli Signed-off-by: Francesco Gringoli <francesco.gringoli@ing.unibs.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwl3945: add MODULE_FIRMWARE for 3945 HWZhu Yi2008-09-151-0/+2
| | | | | | | | | | | | | | This patch adds MODULE_FIRMWARE statement for 3945 HW. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: add MODULE_FIRMWARE for 5000 HWTomas Winkler2008-09-151-0/+2
| | | | | | | | | | | | | | | | This patch adds MODULE_FIRMWARE statement for 5000 HW. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: update 5350 Wifi PCI IDsTomas Winkler2008-09-151-1/+4
| | | | | | | | | | | | | | | | This patch updates PCI IDs for 5350 Wifi/WiMax. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * iwlwifi: don't access mac80211's AMPDU state machineJohannes Berg2008-09-151-7/+1
| | | | | | | | | | | | | | | | | | | | There really is no need, at worst ieee80211_start_tx_ba_session will log a message when debugging is enabled, and poking such internals of mac80211 definitely doesn't belong into an RC algorithm. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: share sta_info->ht_infoJohannes Berg2008-09-151-3/+3
| | | | | | | | | | | | | | | | | | Rate control algorithms may need access to a station's HT capabilities, so share the ht_info struct in the public station API. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: move txrate_idx into RC algorithmsJohannes Berg2008-09-153-19/+5
| | | | | | | | | | | | | | | | | | | | The sta_info->txrate_idx member isn't used by all RC algorithms in the way it was intended to be used, move it into those that require it (only PID) and keep track in the core code of which rate was last used for reporting to userspace and the mesh MLME. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: share sta->supp_ratesJohannes Berg2008-09-153-6/+6
| | | | | | | | | | | | | | | | As more preparation for a saner rate control algorithm API, share the supported rates bitmap in the public API. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
| * mac80211: move last_txrate_idx into RC algorithmsJohannes Berg2008-09-152-14/+21
| | | | | | | | | | | | | | | | This variable in sta_info is only used in a meaningful way by the Intel RC algorithms, so move it into those. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-17 08:24:58 +0100