summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* clocksource/cadence_ttc: Overhaul clocksource frequency adjustmentSoren Brinkmann2014-03-111-20/+84
| | | | | | | | | | | | | | | | | | | The currently used method adjusting the clocksource to a changing input frequency does not work on kernels from 3.11 on. The new approach is to keep the timer frequency as constant as possible. I.e. - due to the TTC's prescaler limitations, allow frequency changes only if the frequency scales by a power of 2 - adjust the counter's divider on the fly when a frequency change occurs This limits cpufreq to scale by certain factors only. But we may keep the time base somewhat constant, so that sleep() & co keep working as expected, while supporting cpufreq. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
* clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabledSoren Brinkmann2014-03-111-15/+2
| | | | | | | | | | The timer core takes care of serialization and IRQs. Hence the driver is no longer required to disable interrupts when calling clockevents_update_freq(). Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Michal Simek <michal.simek@xilinx.com>
* clocksource: Add Kconfig entries for CMT, MTU2, TMU and STIMagnus Damm2014-03-111-0/+44
| | | | | | | | | | | Add Kconfig entries for CMT, MTU2, TMU and STI to drivers/clocksource/Kconfig. This will allow us to get rid of duplicated entires in architecture code such as arch/sh and arch/arm/mach-shmobile. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: armada-370-xp: Use atomic access for shared registersEzequiel Garcia2014-03-111-8/+4
| | | | | | | | Replace the driver-specific thread-safe shared register API by the recently introduced atomic_io_clear_set(). Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: orion: Use atomic access for shared registersEzequiel Garcia2014-03-111-18/+10
| | | | | | | | | | | | Replace the driver-specific thread-safe shared register API by the recently introduced atomic_io_clear_set(). Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Tested-by: Willy Tarreau <w@1wt.eu> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: timer-keystone: Delete unnecessary variableMatthias Brugger2014-03-111-4/+1
| | | | | | | | | Commit 438e0bff5257 added the timer-keystone device driver but make use of an unnecessary variable in the init function. This patch deletes this variable. Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: timer-keystone: introduce clocksource driver for KeystoneIvan Khoronzhuk2014-03-112-0/+245
| | | | | | | | | | | | | | Add broadcast clock-event device for the Keystone arch. The timer can be configured as a general-purpose 64-bit timer, dual general-purpose 32-bit timers. When configured as dual 32-bit timers, each half can operate in conjunction (chain mode) or independently (unchained mode) of each other. Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Santosh shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: sunxi: Add new compatiblesMaxime Ripard2014-03-111-1/+1
| | | | | | | | | | The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Add compatibles matching the other pattern to the timer driver for consistency, and keep the older one for backward compatibility. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* ARM: u300: move timer driver to clocksourceLinus Walleij2014-03-112-0/+448
| | | | | | | | | | Move the U300 timer driver down to the clocksource driver subsystem and keep arch/arm clean. Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* clocksource: arch_timer: Set dynamic irq affinity on mmio clockeventStephen Boyd2014-03-111-0/+1
| | | | | | | | | Set the CLOCK_EVT_FEAT_DYNIRQ flag on the memory mapped clockevent so that we save power by waking up the CPU with the next event when this timer is used in broadcast mode. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
* cpuidle: Handle clockevents_notify(BROADCAST_ENTER) failurePreeti U Murthy2014-02-071-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some archs set the CPUIDLE_FLAG_TIMER_STOP flag for idle states in which the local timers stop. The cpuidle_idle_call() currently handles such idle states by calling into the broadcast framework so as to wakeup CPUs at their next wakeup event. With the hrtimer mode of broadcast, the BROADCAST_ENTER call into the broadcast frameowork can fail for archs that do not have an external clock device to handle wakeups and the CPU in question has thus to be made the stand by CPU. This patch handles such cases by failing the call into cpuidle so that the arch can take some default action. The arch will certainly not enter a similar idle state because a failed cpuidle call will also implicitly indicate that the broadcast framework has not registered this CPU to be woken up. Hence we are safe if we fail the cpuidle call. In the process move the functions that trace idle statistics just before and after the entry and exit into idle states respectively. In other scenarios where the call to cpuidle fails, we end up not tracing idle entry and exit since a decision on an idle state could not be taken. Similarly when the call to broadcast framework fails, we skip tracing idle statistics because we are in no further position to take a decision on an alternative idle state to enter into. Signed-off-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: deepthi@linux.vnet.ibm.com Cc: paulmck@linux.vnet.ibm.com Cc: fweisbec@gmail.com Cc: paulus@samba.org Cc: srivatsa.bhat@linux.vnet.ibm.com Cc: svaidy@linux.vnet.ibm.com Cc: peterz@infradead.org Cc: benh@kernel.crashing.org Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20140207080652.17187.66344.stgit@preeti.in.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
* parisc/sti_console: prefer Linux fonts over built-in ROM fontsHelge Deller2014-02-021-1/+1
| | | | | | | | | | The built-in ROM fonts lack many necessary ASCII characters, which is why it makes sens to prefer the Linux fonts instead if they are available. This makes consoles on STI graphics cards which are not supported by the stifb driver (e.g. Visualize FXe) looks much nicer. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v3.13
* Merge branch 'hwmon-for-linus' of ↵Linus Torvalds2014-02-021-0/+2
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon kconfig fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors hwmon: Fix SENSORS_LM75 dependencies to eliminate build errors
| * hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errorsJean Delvare2014-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Similar to what was done for the lm75 driver. Add depends on THERMAL since that is what provides the register/unregister functions above, but only if THERMAL_OF was selected as this is an optional feature of the driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
| * hwmon: Fix SENSORS_LM75 dependencies to eliminate build errorsJean Delvare2014-02-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on an earlier attempt by Randy Dunlap. Fix SENSORS_LM75 dependencies to eliminate build errors: drivers/built-in.o: In function `lm75_remove': lm75.c:(.text+0x12bd8c): undefined reference to `thermal_zone_of_sensor_unregister' drivers/built-in.o: In function `lm75_probe': lm75.c:(.text+0x12c123): undefined reference to `thermal_zone_of_sensor_register' Add depends on THERMAL since that is what provides the register/unregister functions above, but only if THERMAL_OF was selected as this is an optional feature of the driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Randy Dunlap <rdunlap@infradead.org> Acked-by: Eduardo Valentin <eduardo.valentin@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net>
* | Merge tag 'fixes-for-linus' of ↵Linus Torvalds2014-02-023-6/+14
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Here's a set of patches for (hopefully) -rc1. Some of them are fixes, but a good number of them also do things such as enable new drivers in the defconfigs for platforms that have such devices, increases coverage of the multiplatform defconfig and some DTS changes that plumbs up some of the devices that now have bindings and driver support. The commit dates are recent; we've mostly collected these fixes in the last few days but I also had to rebuild the branch yesterday to sort out some internal conflicts which reset the timestamps. The changes should have been tested by each platform maintainer already (and few of them have cross-platform impact) so I'm personally not too concerned by it at this time" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits) ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA ARM: multi_v7_defconfig: add mvebu drivers clocksource: kona: Add basic use of external clock drivers: bus: fix CCI driver kcalloc call parameters swap ARM: dts: bcm28155-ap: Fix Card Detection GPIO ARM: multi_v7_defconfig: Select CONFIG_AT803X_PHY ARM: keystone: config: fix build warning when CONFIG_DMADEVICES is not set MAINTAINERS: ARM: SiRF: use regex patterns to involve all SiRF drivers ARM: dts: zynq: Add SDHCI nodes ARM: hisi: don't select SMP ARM: tegra: rebuild tegra_defconfig to add DEBUG_FS ARM: multi_v7: copy most options from tegra_defconfig ARM: iop32x: fix power off handling for the EM7210 board ARM: integrator: restore static map on the CP ARM: msm_defconfig: Enable MSM clock drivers ARM: dts: msm: Add clock controller nodes and hook into uart ARM: OMAP4+: move errata initialization to omap4_pm_init_early ARM: OMAP4460: cpuidle: Extend PM_OMAP4_ROM_SMP_BOOT_ERRATUM_GICD on cpuidle ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: shmobile: r8a7790.dtsi: ficx i2c[0-3] clock reference ...
| * clocksource: kona: Add basic use of external clockTim Kryger2014-02-011-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | When an clock is specified in the device tree, enable it and use it to determine the external clock frequency. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Olof Johansson <olof@lixom.net>
| * drivers: bus: fix CCI driver kcalloc call parameters swapLorenzo Pieralisi2014-02-011-1/+1
| | | | | | | | | | | | | | | | | | | | This patch fixes a bug/typo in the CCI driver kcalloc usage that inadvertently swapped the parameters order in the kcalloc call and went unnoticed. Reported-by: Xia Feng <xiafeng@allwinnertech.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
| * Merge tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson2014-01-311-2/+2
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mvebu fixes for v3.13 (incremental #2) - allow building and booting DT and non-DT plat-orion SoCs - catch proper return value for kirkwood_pm_init() - properly check return of of_iomap to solve boot hangs (mirabox, others) - remove a compile warning on Armada 370 with non-SMP. * tag 'mvebu-fixes-3.13-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP) ARM: mvebu: Fix kernel hang in mvebu_soc_id_init() when of_iomap failed ARM: kirkwood: kirkwood_pm_init() should return void ARM: orion: provide C-style interrupt handler for MULTI_IRQ_HANDLER Signed-off-by: Olof Johansson <olof@lixom.net>
| | * ARM: mvebu: fix compilation warning on Armada 370 (i.e. non-SMP)Arnaud Ebalard2014-01-211-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following appears during compilation for an Armada 370 target because 'irq_controller_lock' is used only when CONFIG_SMP is enabled: drivers/irqchip/irq-armada-370-xp.c:62:8: warning: 'irq_controller_lock' defined but not used [-Wunused-variable] Fix that warning by moving declaration of 'irq_controller_lock' inside existing #ifdef. Signed-off-by: Arnaud Ebalard <arno@natisbad.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
* | | Merge tag 'staging-3.14-rc1' of ↵Linus Torvalds2014-02-0175-0/+71854
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull rtl8812ae staging wireless driver from Greg KH: "Here's a single staging driver for a wireless chipset that has shown up in the SteamBox hardware. It is merged separately from the "main" staging pull request to sync up with the wireless api changes that came in from the networking tree. It's self-contained and works for me and others. Larry will be replacing it with a "real" driver for 3.15, but for now this one is needed" * tag 'staging-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8821ae: Enable build by reverting BROKEN marking staging: r8821ae: Fix build problems Staging: rtl8812ae: disable due to build errors Staging: rtl8821ae: add TODO file Staging: rtl8821ae: removed unused functions and variables Staging: rtl8821ae: rc.c: fix up function prototypes Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driver
| * | | staging: r8821ae: Enable build by reverting BROKEN markingLarry Finger2014-01-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When this driver failed to build in the linux-next tree, Stephen Rothwell modified Kconfig to disable it. Now that the problems are fixed, that change can be reverted. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | staging: r8821ae: Fix build problemsLarry Finger2014-01-276-12/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As initially introduced, this driver failed to build in the linux-next tree due to changes coming from newer developments arising in the wireless trees. This patch removes incompatible code and provides definitions for symbols that have been removed from mac80211. In addition, several warnings were fixed. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | Merge branch 'master' into staging-nextGreg Kroah-Hartman2014-01-273025-70076/+161897
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need the network changes in staging-next in order to be able to fix up the rtl8821ae driver to build properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Staging: rtl8812ae: disable due to build errorsStephen Rothwell2014-01-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Staging: rtl8821ae: add TODO fileGreg Kroah-Hartman2014-01-231-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | List what needs to be done to this driver to get it merged to the "proper" part of the kernel tree. Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Staging: rtl8821ae: removed unused functions and variablesGreg Kroah-Hartman2014-01-234-354/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up a bunch of build warnings by removing functions and variables that aren't being used. Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Staging: rtl8821ae: rc.c: fix up function prototypesGreg Kroah-Hartman2014-01-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These function parameters are incorrect for the callbacks. Luckily the functions don't actually do anything, so the code still "works" just fine... Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | Staging: rtl8812ae: Add Realtek 8821 PCI WIFI driverGreg Kroah-Hartman2014-01-2374-0/+72188
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This comes directly from the Realtek tarball, filename: wifi_driver_8821ae_0018.1129.2013.tar.gz I mushed the three modules (btcoexist, rtlwifi and rtl8821ae) together into one, in order to make it all build as one stand-alone module. After the btcoexist driver gets merged upstream, I'll pull it out of here, and will continue to work on removing this version of rtlwifi in order to use the in-kernel one. Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | Revert "PCI: Remove from bus_list and release resources in pci_release_dev()"Rafael J. Wysocki2014-02-012-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit ef83b0781a73 "PCI: Remove from bus_list and release resources in pci_release_dev()" that made some nasty race conditions become possible. For example, if a Thunderbolt link is unplugged and then replugged immediately, the pci_release_dev() resulting from the hot-remove code path may be racing with the hot-add code path which after that commit causes various kinds of breakage to happen (up to and including a hard crash of the whole system). Moreover, the problem that commit ef83b0781a73 attempted to address cannot happen any more after commit 8a4c5c329de7 "PCI: Check parent kobject in pci_destroy_dev()", because pci_destroy_dev() will now return immediately if it has already been executed for the given device. Note, however, that the invocation of msi_remove_pci_irq_vectors() removed by commit ef83b0781a73 from pci_free_resources() along with the other changes made by it is not added back because of subsequent code changes depending on that modification. Fixes: ef83b0781a73 (PCI: Remove from bus_list and release resources in pci_release_dev()) Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | | | Merge branch 'for-next' of ↵Linus Torvalds2014-02-0135-487/+2193
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "The highlights this round include: - add support for SCSI Referrals (Hannes) - add support for T10 DIF into target core (nab + mkp) - add support for T10 DIF emulation in FILEIO + RAMDISK backends (Sagi + nab) - add support for T10 DIF -> bio_integrity passthrough in IBLOCK backend (nab) - prep changes to iser-target for >= v3.15 T10 DIF support (Sagi) - add support for qla2xxx N_Port ID Virtualization - NPIV (Saurav + Quinn) - allow percpu_ida_alloc() to receive task state bitmask (Kent) - fix >= v3.12 iscsi-target session reset hung task regression (nab) - fix >= v3.13 percpu_ref se_lun->lun_ref_active race (nab) - fix a long-standing network portal creation race (Andy)" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) target: Fix percpu_ref_put race in transport_lun_remove_cmd target/iscsi: Fix network portal creation race target: Report bad sector in sense data for DIF errors iscsi-target: Convert gfp_t parameter to task state bitmask iscsi-target: Fix connection reset hang with percpu_ida_alloc percpu_ida: Make percpu_ida_alloc + callers accept task state bitmask iscsi-target: Pre-allocate more tags to avoid ack starvation qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lport qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO. qla2xxx: Fix scsi_host leak on qlt_lport_register callback failure IB/isert: pass scatterlist instead of cmd to fast_reg_mr routine IB/isert: Move fastreg descriptor creation to a function IB/isert: Avoid frwr notation, user fastreg IB/isert: seperate connection protection domains and dma MRs tcm_loop: Enable DIF/DIX modes in SCSI host LLD target/rd: Add DIF protection into rd_execute_rw target/rd: Add support for protection SGL setup + release target/rd: Refactor rd_build_device_space + rd_release_device_space target/file: Add DIF protection support to fd_execute_rw target/file: Add DIF protection init/format support ...
| * | | | | target: Fix percpu_ref_put race in transport_lun_remove_cmdNicholas Bellinger2014-01-301-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a percpu_ref_put race for se_lun->lun_ref in transport_lun_remove_cmd() where ->lun_ref could end up being put more than once per command via different target completion and fabric release contexts. It adds a cmpxchg() for se_cmd->lun_ref_active to ensure that percpu_ref_put() is only ever called once per se_cmd. This bug was manifesting itself as a LUN shutdown regression bug in >= v3.13 code, where percpu_ref_kill() would end up hanging indefinately due to the incorrect percpu_ref count. (Change se_cmd->lun_ref_active from bool -> int to force at least a 4-byte cmpxchg with MIPS ll/sc ins. - Fengguang) Reported-by: Tommy Apel <tommyapeldk@gmail.com> Cc: Tommy Apel <tommyapeldk@gmail.com> Cc: <stable@vger.kernel.org> #3.13+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | target/iscsi: Fix network portal creation raceAndy Grover2014-01-301-13/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When creating network portals rapidly, such as when restoring a configuration, LIO's code to reuse existing portals can return a false negative if the thread hasn't run yet and set np_thread_state to ISCSI_NP_THREAD_ACTIVE. This causes an error in the network stack when attempting to bind to the same address/port. This patch sets NP_THREAD_ACTIVE before the np is placed on g_np_list, so even if the thread hasn't run yet, iscsit_get_np will return the existing np. Also, convert np_lock -> np_mutex + hold across adding new net portal to g_np_list to prevent a race where two threads may attempt to create the same network portal, resulting in one of them failing. (nab: Add missing mutex_unlocks in iscsit_add_np failure paths) (DanC: Fix incorrect spin_unlock -> spin_unlock_bh) Signed-off-by: Andy Grover <agrover@redhat.com> Cc: <stable@vger.kernel.org> #3.1+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | target: Report bad sector in sense data for DIF errorsSagi Grimberg2014-01-252-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPC-4 states that data-integrity errors shall also report the failed sector in CHECK_CONDITION response sense data information field. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | iscsi-target: Convert gfp_t parameter to task state bitmaskNicholas Bellinger2014-01-254-19/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch propigates the use of task state bitmask now used by percpu_ida_alloc() up the iscsi-target callchain, replacing the use of GFP_ATOMIC for TASK_RUNNING, and GFP_KERNEL for TASK_INTERRUPTIBLE. Also, drop the unnecessary gfp_t parameter to isert_allocate_cmd(), and just pass TASK_INTERRUPTIBLE into iscsit_allocate_cmd(). Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | iscsi-target: Fix connection reset hang with percpu_ida_allocNicholas Bellinger2014-01-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses a bug where connection reset would hang indefinately once percpu_ida_alloc() was starved for tags, due to the fact that it always assumed uninterruptible sleep mode. So now make percpu_ida_alloc() check for signal_pending_state() for making interruptible sleep optional, and convert iscsit_allocate_cmd() to set TASK_INTERRUPTIBLE for GFP_KERNEL, or TASK_RUNNING for GFP_ATOMIC. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Kent Overstreet <kmo@daterainc.com> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | percpu_ida: Make percpu_ida_alloc + callers accept task state bitmaskKent Overstreet2014-01-233-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes percpu_ida_alloc() + callers to accept task state bitmask for prepare_to_wait() for code like target/iscsi that needs it for interruptible sleep, that is provided in a subsequent patch. It now expects TASK_UNINTERRUPTIBLE when the caller is able to sleep waiting for a new tag, or TASK_RUNNING when the caller cannot sleep, and is forced to return a negative value when no tags are available. v2 changes: - Include blk-mq + tcm_fc + vhost/scsi + target/iscsi changes - Drop signal_pending_state() call v3 changes: - Only call prepare_to_wait() + finish_wait() when != TASK_RUNNING (PeterZ) Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | iscsi-target: Pre-allocate more tags to avoid ack starvationNicholas Bellinger2014-01-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses an traditional iscsi-target fabric ack starvation issue where iscsit_allocate_cmd() -> percpu_ida_alloc_state() ends up hitting slow path percpu-ida code, because iscsit_ack_from_expstatsn() is expected to free ack'ed tags after tag allocation. This is done to take into account the tags waiting to be acknowledged and released in iscsit_ack_from_expstatsn(), but who's number are not directly limited by the CmdSN Window queue_depth being enforced by the target. So that said, this patch bumps up the pre-allocated number of per session tags to: (max(queue_depth, ISCSIT_MIN_TAGS) * 2) + ISCSIT_EXTRA_TAGS for good measure to avoid the percpu_ida_alloc_state() slow path. Cc: <stable@vger.kernel.org> #3.12+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | qla2xxx: Configure NPIV fc_vport via tcm_qla2xxx_npiv_make_lportNicholas Bellinger2014-01-193-47/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch changes qla2xxx qlt_lport_register() code to accept target_lport_ptr + npiv_wwpn + npiv_wwnn parameters, and updates tcm_qla2xxx to use the new tcm_qla2xxx_lport_register_npiv_cb() callback for invoking fc_vport_create() from configfs context via tcm_qla2xxx_npiv_make_lport() code. In order for this to work, the qlt_lport_register() callback is now called without holding qla_tgt_mutex, as the fc_vport creation process will call qlt_vport_create() -> qlt_add_target(), which already expects to acquire it. It enforces /sys/kernel/config/target/qla2xxx_npiv/$NPIV_WWPN naming in the following format: $PHYSICAL_WWPN@$NPIV_WWPN:$NPIV_WWNN and assumes the $PHYSICAL_WWPN in question has already had been configured for target mode in non NPIV mode. Finally, it updates existing tcm_qla2xxx_lport_register_cb() logic to setup the non NPIV assignments that have now been moved out of qlt_lport_register() code. Cc: Sawan Chandak <sawan.chandak@qlogic.com> Cc: Quinn Tran <quinn.tran@qlogic.com> Cc: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | qla2xxx: Enhancements to enable NPIV support for QLOGIC ISPs with TCM/LIO.Saurav Kashyap2014-01-195-125/+153
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Sawan Chandak <sawan.chandak@qlogic.com> Signed-off-by: Quinn Tran <quinn.tran@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | qla2xxx: Fix scsi_host leak on qlt_lport_register callback failureNicholas Bellinger2014-01-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a possible scsi_host reference leak in qlt_lport_register(), when a non zero return from the passed (*callback) does not call drop the local reference via scsi_host_put() before returning. This currently does not effect existing tcm_qla2xxx code as the passed callback will never fail, but fix this up regardless for future code. Cc: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | IB/isert: pass scatterlist instead of cmd to fast_reg_mr routineSagi Grimberg2014-01-191-16/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This routine may help for protection registration as well. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | IB/isert: Move fastreg descriptor creation to a functionSagi Grimberg2014-01-191-20/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This routine may be called both by fast registration descriptors for data and for integrity buffers. This patch does not change any functionality. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | IB/isert: Avoid frwr notation, user fastregSagi Grimberg2014-01-192-45/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use fast registration lingo. fast registration will also incorporate signature/DIF registration. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | IB/isert: seperate connection protection domains and dma MRsSagi Grimberg2014-01-192-24/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is more correct to seperate connections protection domains and dma_mr handles. protection information support requires to do so. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | tcm_loop: Enable DIF/DIX modes in SCSI host LLDNicholas Bellinger2014-01-191-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates tcm_loop_driver_probe() to set protection information using scsi_host_set_prot() and scsi_host_set_guard(), which currently enabled all modes of DIF/DIX protection, minus DIX TYPE0. Also, update tcm_loop_submission_work() to pass struct scsi_cmnd related protection into target_submit_cmd_map_sgls() during CDB dispatch. Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | target/rd: Add DIF protection into rd_execute_rwNicholas Bellinger2014-01-191-0/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for DIF protection into rd_execute_rw() code for WRITE/READ I/O using sbc_dif_verify_[write,read]() logic. It also adds rd_get_prot_table() for locating protection SGLs assoicated with the ramdisk backend device. v2 changes: - Make rd_execute_rw() to u32 sectors count instead of sector_t - Drop SCF_PROT usage Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | target/rd: Add support for protection SGL setup + releaseNicholas Bellinger2014-01-192-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds rd_build_prot_space() + rd_release_prot_space() logic to setup + release protection information scatterlists. It also adds rd_init_prot() + rd_free_prot() se_subsystem_api callbacks used by target core code for setup + release of protection information. v2 changes: - Drop unused sg_table from rd_release_prot_space (Wei) - Drop rd_release_prot_space call from rd_free_device Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | target/rd: Refactor rd_build_device_space + rd_release_device_spaceNicholas Bellinger2014-01-191-45/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactors rd_build_device_space() + rd_release_device_space() into rd_allocate_sgl_table() + rd_release_device_space() so that they may be used seperatly for setup + release of protection information scatterlists. Also add explicit memset of pages within rd_allocate_sgl_table() based upon passed 'init_payload' value. v2 changes: - Drop unused sg_table from rd_release_device_space (Wei) Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
| * | | | | target/file: Add DIF protection support to fd_execute_rwNicholas Bellinger2014-01-192-1/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for DIF protection into fd_execute_rw() code for WRITE/READ I/O using sbc_dif_verify_[write,read]() logic. It adds fd_do_prot_rw() for handling interface with FILEIO PI, and uses a locally allocated fd_prot->prot_buf + fd_prot->prot_sg for interacting with SBC DIF verify emulation code. Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-31 18:44:09 +0100