summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* hwmon: (dell-smm) Disable fan support for Dell Inspiron 7720Pali Rohár2018-01-271-1/+39
| | | | | | | | | | | | | | Calling fan related SMM functions implemented by Dell BIOS firmware on Dell Inspiron 7720 freeze kernel for about 500ms. Until Dell fixes it we need to disable fan support for Dell Inspiron 7720 as it makes system unusable. Via "force" module param fan support can be enabled. Reported-by: vova7890@mail.ru Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=195751 Cc: stable@vger.kernel.org # v4.0+, will need backport Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (dell-smm) Enable broken functionality via "force" module paramPali Rohár2018-01-271-2/+5
| | | | | | | | | Some Dell machines are broken and some functionality is disabled. Show warning into dmesg about this fact and allow user via "force" module param to override brokenness and enable broken functionality. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (k10temp) Add temperature offset for Ryzen 1900XGuenter Roeck2018-01-191-0/+1
| | | | | | | Like the other CPUs from the same series, the 1900X has a temperature offset of 27 degrees C. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (lm75) Fix trailing semicolonLuis de Bethencourt2018-01-171-1/+1
| | | | | | | | The trailing semicolon is an empty statement that does no operation. Removing it since it doesn't do anything. Signed-off-by: Luis de Bethencourt <luisbg@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (ina2xx) Fix access to uninitialized mutexMarek Szyprowski2018-01-151-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialize data->config_lock mutex before it is used by the driver code. This fixes following warning on Odroid XU3 boards: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14) [<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8) [<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c) [<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850) [<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8) [<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c) [<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24) [<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0) [<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0) [<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0) [<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0) [<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120) [<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c) [<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250) [<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4) [<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8) [<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c) [<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4) [<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114) [<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20) Fixes: 5d389b125186 ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/ir35221) Remove unnecessary scalingSamuel Mendoza-Jonas2018-01-151-189/+0
| | | | | | | | | | | | The ir35221 datasheet describes specific scaling factors for a number of commands which the current driver applies when reading. However now that the ir35221 has been tested on machines with more easily verifiable readings these descriptions have turned out to be superfluous and reading each command according to the linear format is sufficient. Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (sht3x) wait predefined limits loading complete before accessEmiliano Ingrassia2018-01-121-0/+7
| | | | | | | | | | | | | An sht3x sensor include limits register which contains temperature and humidity limit values. After a reset, pre-defined values are loaded into that register. During the probe function, the driver reads the limits register. However, if the reads are made too early, and the bus is clocked at high frequencies (e.g. 100 kHz or more), the loading could be not completed and the sensor returns a NACK which causes the probe to fail. A delay of at least 500 us before the first read solves this issue. Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/ibm-cffps) Add dependency on LEDS_CLASSArnd Bergmann2018-01-121-0/+1
| | | | | | | | | | | | | Building without CONFIG_LEDS_CLASS causes a link failure: drivers/hwmon/pmbus/ibm-cffps.o: In function `ibm_cffps_probe': ibm-cffps.c:(.text+0x4f4): undefined reference to `devm_of_led_classdev_register' This adds the required dependency. Fixes: ef9e1cdf419a ("hwmon: (pmbus/cffps) Add led class device ...") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/cffps) Add led class device for power supply fault ledeajames@linux.vnet.ibm.com2018-01-111-8/+88
| | | | | | | | | This power supply device doesn't correctly manage it's own fault led. Add an led class device and register it so that userspace can manage power supply fault led as necessary. Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) cffps: Add PMBUS_SKIP_STATUS_CHECKEddie James2018-01-081-0/+6
| | | | | | | | | | | This power supply device regularly fails to read VOUT_MODE due to the CML bit going high. This results in an incorrect exponent used for the voltage data, and therefore the power supply reports incorrect voltage. Work around this by setting the pmbus flag to skip the CML check. Signed-off-by: Eddie James <eajames@linux.vnet.ibm.com> Fixes: f69316d62c70 ("hwmon: (pmbus) Add IBM Common Form Factor (CFF) ...") Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (aspeed-pwm-tacho) Deassert reset in probeJoel2018-01-031-0/+22
| | | | | | | | The ASPEED SoC must deassert a reset in order to use the PWM/tach peripheral. Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) cffps: Add debugfs entriesEdward A. James2018-01-031-1/+201
| | | | | | | | | | | | Add debugfs entries for additional power supply data, including part number, serial number, FRU number, firmware revision, ccin, and the input history of the power supply. The input history is 10 minutes of input power data in the form of twenty 30-second packets. Each packet contains average and maximum power for that 30 second period. Signed-off-by: Edward A. James <eajames@us.ibm.com> [groeck: Fixed endianness problem] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Export pmbus device debugfs directory entryEdward A. James2018-01-032-0/+10
| | | | | | | | | Pmbus client drivers, if they want to use debugfs, should use the same root directory as the pmbus debugfs entries are using. Therefore, export the device dentry for the pmbus client. Signed-off-by: Edward A. James <eajames@us.ibm.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (w83773g) Fix fault detection and reportingGuenter Roeck2018-01-031-1/+1
| | | | | | | | | | | | | | | Smatch reports: drivers/hwmon/w83773g.c:105 get_fault() warn: shift has higher precedence than mask Code analysis shows that the code is indeed wrong. Fix it, and while we are at it, drop unnecessary typecast. Fixes: 86a10c802362 ("hwmon: Add W83773G driver") Cc: Lei YU <mine260309@gmail.com> Reviewed-by: Lei YU <mine260309@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (hih6130) Fix documentation of struct hih6130Guenter Roeck2018-01-031-1/+1
| | | | | | | | | | | Sparse reports: drivers/hwmon/hih6130.c:56: warning: No description found for parameter 'client' drivers/hwmon/hih6130.c:56: warning: Excess struct member 'hwmon_dev' description in 'hih6130' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (iio_hwmon) Fix documentation of struct iio_hwmon_stateGuenter Roeck2018-01-031-1/+2
| | | | | | | | | Sparse reports: drivers/hwmon/iio_hwmon.c:36: warning: No description found for parameter 'groups' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (sht15) Fix parameter documentation of sht15_crc8()Guenter Roeck2018-01-031-0/+1
| | | | | | | | | Sparse reports: drivers/hwmon/sht15.c:188: warning: No description found for parameter 'len' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (sht21) Fix documentation of struct sht21Guenter Roeck2018-01-031-1/+1
| | | | | | | | | | | Sparse reports: drivers/hwmon/sht21.c:60: warning: No description found for parameter 'client' drivers/hwmon/sht21.c:60: warning: Excess struct member 'hwmon_dev' description in 'sht21' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Fix parameter documentationGuenter Roeck2018-01-031-6/+6
| | | | | | | | | | | | | | | | | | | sparse reports: drivers/hwmon/hwmon.c:681: warning: No description found for parameter 'chip' drivers/hwmon/hwmon.c:681: warning: Excess function parameter 'info' description in 'hwmon_device_register_with_info' drivers/hwmon/hwmon.c:789: warning: No description found for parameter 'chip' drivers/hwmon/hwmon.c:789: warning: No description found for parameter 'groups' drivers/hwmon/hwmon.c:789: warning: Excess function parameter 'info' description in 'devm_hwmon_device_register_with_info' Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (max31785) Add OF device ID tableJavier Martinez Canillas2018-01-031-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Before this patch: $ modinfo drivers/hwmon/pmbus/max31785.ko | grep alias alias: i2c:max31785a alias: i2c:max31785 After this patch: $ modinfo drivers/hwmon/pmbus/max31785.ko | grep alias alias: i2c:max31785a alias: i2c:max31785 alias: of:N*T*Cmaxim,max31785aC* alias: of:N*T*Cmaxim,max31785a alias: of:N*T*Cmaxim,max31785C* alias: of:N*T*Cmaxim,max31785 Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (ina2xx) Make calibration register value fixedMaciej Purski2018-01-031-37/+50
| | | | | | | | | | | | | | | | | | | | Calibration register is used for calculating current register in hardware according to datasheet: current = shunt_volt * calib_register / 2048 (ina 226) current = shunt_volt * calib_register / 4096 (ina 219) Fix calib_register value to 2048 for ina226 and 4096 for ina 219 in order to avoid truncation error and provide best precision allowed by shunt_voltage measurement. Make current scale value follow changes of shunt_resistor from sysfs as calib_register value is now fixed. Power_lsb value should also follow shunt_resistor changes as stated in datasheet: power_lsb = 25 * current_lsb (ina 226) power_lsb = 20 * current_lsb (ina 219) Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/max31785) Add dual tachometer supportAndrew Jeffery2018-01-031-0/+147
| | | | | | | | | | | | | | | | | | | | | The dual tachometer feature is implemented in hardware with a TACHSEL input to indicate the rotor under measurement, and exposed on the device by extending the READ_FAN_SPEED_1 word with two extra bytes*. The need to read the non-standard four-byte response leads to a cut-down implementation of i2c_smbus_xfer_emulated() included in the driver. Further, to expose the second rotor tachometer value to userspace the values are exposed through virtual pages. We re-route accesses to FAN_CONFIG_1_2 and READ_FAN_SPEED_1 on pages 23-28 (not defined by the hardware) to the same registers on pages 0-5, and with the latter command we extract the value from the second word of the four-byte response. * The documentation recommends the slower rotor be associated with TACHSEL=0, which corresponds to the first word of the response. The TACHSEL=0 measurement is used by the controller's closed-loop fan management to judge target fan rate. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Add virtual page config bitAndrew Jeffery2018-01-032-9/+20
| | | | | | | | | | | | | | | | | | Some circumstances call for virtual pages, to expose multiple values packed into an extended PMBus register in a manner non-compliant with the PMBus standard. An example of this is the Maxim MAX31785 controller, which extends the READ_FAN_SPEED_1 PMBus register from two to four bytes to support tach readings for both rotors of a dual rotor fan. This extended register contains two word-sized values, one reporting the rate of the fastest rotor, the other the rate of the slowest. The concept of virtual pages aids this situation by mapping the page number onto the value to be selected from the vectored result. We should not try to set virtual pages on the device as such a page explicitly doesn't exist; add a flag so we can avoid doing so. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/max31785) Add fan controlAndrew Jeffery2018-01-031-1/+137
| | | | | | | | | | | The implementation makes use of the new fan control virtual registers exposed by the pmbus core. It mixes use of the default implementations with some overrides via the read/write handlers to handle FAN_COMMAND_1 on the MAX31785, whose definition breaks the value range into various control bands dependent on RPM or PWM mode. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus) Add fan control supportAndrew Jeffery2018-01-032-18/+259
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Expose fanX_target, pwmX and pwmX_enable hwmon sysfs attributes. Fans in a PMBus device are driven by the configuration of two registers, FAN_CONFIG_x_y and FAN_COMMAND_x: FAN_CONFIG_x_y dictates how the fan and the tacho operate (if installed), while FAN_COMMAND_x sets the desired fan rate. The unit of FAN_COMMAND_x is dependent on the operational fan mode, RPM or PWM percent duty, as determined by the corresponding configuration in FAN_CONFIG_x_y. The mapping of fanX_target, pwmX and pwmX_enable onto FAN_CONFIG_x_y and FAN_COMMAND_x is implemented with the addition of virtual registers to facilitate the necessary side-effects of each access: 1. PMBUS_VIRT_FAN_TARGET_x 2. PMBUS_VIRT_PWM_x 3. PMBUS_VIRT_PWM_ENABLE_x Some complexity arises with the fanX_target and pwmX attributes both mapping onto FAN_COMMAND_x: There is no general mapping between PWM percent duty and RPM, so we can't display values in either attribute in terms of the other (which in my mind is the intuitive, if impossible, behaviour). This problem also affects the pwmX_enable attribute which allows userspace to switch between full speed, manual PWM and a number of automatic control modes, possibly including a switch to RPM behaviour (e.g. automatically adjusting PWM duty to reach a RPM target, the behaviour of fanX_target). The next most intuitive behaviour is for fanX_target and pwmX to simply be independent, to retain their most recently set value even if that value is not active on the hardware (due to switching to the alternative control mode). This property of retaining the value independent of the hardware state has useful results for both userspace and the kernel: Userspace always sees a sensible value in the attribute (the last thing it was set to, as opposed to 0 or receiving an error on read), and the kernel can use the attributes as a value cache. This latter point eases the implementation of pwmX_enable, which can look up the associated pmbus_sensor object, take its cached value and apply it to hardware on changing control mode. This ensures we will not arbitrarily set a PWM value as an RPM value or vice versa, and we can assume that the RPM or PWM value set was sensible at least at some point in the past. Finally, the DIRECT mode coefficients of some controllers is different between RPM and PWM percent duty control modes, so PSC_PWM is introduced to capture the necessary coefficients. As pmbus core had no PWM support previously PSC_FAN continues to be used to capture the RPM DIRECT coefficients, but in order to avoid falsely applying RPM scaling to PWM values I have introduced the PMBUS_HAVE_PWM12 and PMB_BUS_HAVE_PWM34 feature bits. These feature bits allow drivers to explicitly declare PWM support in order to have the attributes exposed. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (pmbus/lm25066) Drop support for LM25063Guenter Roeck2018-01-031-65/+2
| | | | | | LM25063 was never released. Drop support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: (coretemp) deprecate pci_get_bus_and_slot()Sinan Kaya2018-01-031-1/+2
| | | | | | | | | | | | | pci_get_bus_and_slot() is restrictive such that it assumes domain=0 as where a PCI device is present. This restricts the device drivers to be reused for other domain numbers. Use pci_get_domain_bus_and_slot() with a domain number of 0 where we can't extract the domain number. Other places, use the actual domain number from the device. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Drop unnecessary 'default n' from KconfigGuenter Roeck2018-01-031-16/+0
| | | | | | | 'default n' is default, so there is no need to specify it explicitly. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* hwmon: Add W83773G driverLei YU2018-01-033-0/+340
| | | | | | | | Nuvoton W83773G is a hardware monitor IC providing one local temperature and two remote temperature sensors. Signed-off-by: Lei YU <mine260309@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
* Merge branch 'x86/urgent' of ↵Linus Torvalds2017-12-311-6/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of fixlets for x86: - Fix the ESPFIX double fault handling for 5-level pagetables - Fix the commandline parsing for 'apic=' on 32bit systems and update documentation - Make zombie stack traces reliable - Fix kexec with stack canary - Fix the delivery mode for APICs which was missed when the x86 vector management was converted to single target delivery. Caused a regression due to the broken hardware which ignores affinity settings in lowest prio delivery mode. - Unbreak modules when AMD memory encryption is enabled - Remove an unused parameter of prepare_switch_to" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Switch all APICs to Fixed delivery mode x86/apic: Update the 'apic=' description of setting APIC driver x86/apic: Avoid wrong warning when parsing 'apic=' in X86-32 case x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR) x86: Remove unused parameter of prepare_switch_to x86/stacktrace: Make zombie stack traces reliable x86/mm: Unbreak modules that use the DMA API x86/build: Make isoimage work on Debian x86/espfix/64: Fix espfix double-fault handling on 5-level systems
| * x86/apic: Switch all APICs to Fixed delivery modeThomas Gleixner2017-12-291-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some of the APIC incarnations are operating in lowest priority delivery mode. This worked as long as the vector management code allocated the same vector on all possible CPUs for each interrupt. Lowest priority delivery mode does not necessarily respect the affinity setting and may redirect to some other online CPU. This was documented somewhere in the old code and the conversion to single target delivery missed to update the delivery mode of the affected APIC drivers which results in spurious interrupts on some of the affected CPU/Chipset combinations. Switch the APIC drivers over to Fixed delivery mode and remove all leftovers of lowest priority delivery mode. Switching to Fixed delivery mode is not a problem on these CPUs because the kernel already uses Fixed delivery mode for IPIs. The reason for this is that th SDM explicitely forbids lowest prio mode for IPIs. The reason is obvious: If the irq routing does not honor destination targets in lowest prio mode then an IPI targeted at CPU1 might end up on CPU0, which would be a fatal problem in many cases. As a consequence of this change, the apic::irq_delivery_mode field is now pointless, but this needs to be cleaned up in a separate patch. Fixes: fdba46ffb4c2 ("x86/apic: Get rid of multi CPU affinity") Reported-by: vcaputo@pengaru.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: vcaputo@pengaru.com Cc: Pavel Machek <pavel@ucw.cz> Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712281140440.1688@nanos
* | Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2017-12-3112-21/+44
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A rather large update after the kaisered maintainer finally found time to handle regression reports. - The larger part addresses a regression caused by the x86 vector management rework. The reservation based model does not work reliably for MSI interrupts, if they cannot be masked (yes, yet another hw engineering trainwreck). The reason is that the reservation mode assigns a dummy vector when the interrupt is allocated and switches to a real vector when the interrupt is requested. If the MSI entry cannot be masked then the initialization might raise an interrupt before the interrupt is requested, which ends up as spurious interrupt and causes device malfunction and worse. The fix is to exclude MSI interrupts which do not support masking from reservation mode and assign a real vector right away. - Extend the extra lockdep class setup for nested interrupts with a class for the recently added irq_desc::request_mutex so lockdep can differeniate and does not emit false positive warnings. - A ratelimit guard for the bad irq printout so in case a bad irq comes back immediately the system does not drown in dmesg spam" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/msi, x86/vector: Prevent reservation mode for non maskable MSI genirq/irqdomain: Rename early argument of irq_domain_activate_irq() x86/vector: Use IRQD_CAN_RESERVE flag genirq: Introduce IRQD_CAN_RESERVE flag genirq/msi: Handle reactivation only on success gpio: brcmstb: Make really use of the new lockdep class genirq: Guard handle_bad_irq log messages kernel/irq: Extend lockdep class for request mutex
| * | genirq/irqdomain: Rename early argument of irq_domain_activate_irq()Thomas Gleixner2017-12-295-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'early' argument of irq_domain_activate_irq() is actually used to denote reservation mode. To avoid confusion, rename it before abuse happens. No functional change. Fixes: 72491643469a ("genirq/irqdomain: Update irq_domain_ops.activate() signature") Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Alexandru Chirvasitu <achirvasub@gmail.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Mikael Pettersson <mikpelinux@gmail.com> Cc: Josh Poulson <jopoulso@microsoft.com> Cc: Mihai Costache <v-micos@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-pci@vger.kernel.org Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Simon Xiao <sixiao@microsoft.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jork Loeser <Jork.Loeser@microsoft.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: devel@linuxdriverproject.org Cc: KY Srinivasan <kys@microsoft.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Sakari Ailus <sakari.ailus@intel.com>, Cc: linux-media@vger.kernel.org
| * | gpio: brcmstb: Make really use of the new lockdep classThomas Gleixner2017-12-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent extension of irq_set_lockdep_class() with a second argument added the new lockdep class to the mrcmstb driver, but used the already existing lockdep class as second argument, which leaves the new lockdep class defined but unused. Use the new lockdep class as that's what the change intended to do. Fixes: 39c3fd58952d ("kernel/irq: Extend lockdep class for request mutex") Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Lunn <andrew@lunn.ch> Cc: linus.walleij@linaro.org
| * | kernel/irq: Extend lockdep class for request mutexAndrew Lunn2017-12-287-15/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IRQ code already has support for lockdep class for the lock mutex in an interrupt descriptor. Extend this to add a second class for the request mutex in the descriptor. Not having a class is resulting in false positive splats in some code paths. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: linus.walleij@linaro.org Cc: grygorii.strashko@ti.com Cc: f.fainelli@gmail.com Link: https://lkml.kernel.org/r/1512234664-21555-1-git-send-email-andrew@lunn.ch
* | | Merge tag 'char-misc-4.15-rc6' of ↵Linus Torvalds2017-12-314-16/+36
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are six small fixes of some of the char/misc drivers that have been sent in to resolve reported issues. Nothing major, a binder use-after-free fix, some thunderbolt bugfixes, a hyper-v bugfix, and an nvmem driver fix. All of these have been in linux-next with no reported issues for a while" * tag 'char-misc-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: nvmem: meson-mx-efuse: fix reading from an offset other than 0 binder: fix proc->files use-after-free vmbus: unregister device_obj->channels_kset thunderbolt: Mask ring interrupt properly when polling starts MAINTAINERS: Add thunderbolt.rst to the Thunderbolt driver entry thunderbolt: Make pathname to force_power shorter
| * | | nvmem: meson-mx-efuse: fix reading from an offset other than 0Martin Blumenstingl2017-12-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | meson_mx_efuse_read calculates the address internal to the eFuse based on the offset and the word size. This works fine with any given offset. However, the offset is also included when writing to the output buffer. This means that reading 4 bytes at offset 500 tries to write beyond the array allocated by the nvmem core as it wants to write the 4 bytes to "buffer address + offset (500)". This issue did not show up in the previous tests since no driver uses any value from the eFuse yet and reading the eFuse via sysfs simply reads the whole eFuse, starting at offset 0. Fix this by only including the offset in the internal address calculation. Fixes: 8caef1fa9176 ("nvmem: add a driver for the Amlogic Meson6/Meson8/Meson8b SoCs") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | binder: fix proc->files use-after-freeTodd Kjos2017-12-181-13/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | proc->files cleanup is initiated by binder_vma_close. Therefore a reference on the binder_proc is not enough to prevent the files_struct from being released while the binder_proc still has a reference. This can lead to an attempt to dereference the stale pointer obtained from proc->files prior to proc->files cleanup. This has been seen once in task_get_unused_fd_flags() when __alloc_fd() is called with a stale "files". The fix is to protect proc->files with a mutex to prevent cleanup while in use. Signed-off-by: Todd Kjos <tkjos@google.com> Cc: stable <stable@vger.kernel.org> # 4.14 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | vmbus: unregister device_obj->channels_ksetDexuan Cui2017-12-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without the patch, a device can't be thoroughly destroyed, because vmbus_device_register() -> kset_create_and_add() still holds a reference to the hv_device's device.kobj. Signed-off-by: Dexuan Cui <decui@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info") Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | thunderbolt: Mask ring interrupt properly when polling startsMika Westerberg2017-12-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When ring enters polling mode we are expected to mask the ring interrupt before the callback is called. However, the current code actually unmasks it probably because of a copy-paste mistake. Mask the interrupt properly from now on. Fixes: 4ffe722eefcb ("thunderbolt: Add polling mode for rings") Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Yehezkel Bernat <yehezkel.bernat@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'driver-core-4.15-rc6' of ↵Linus Torvalds2017-12-311-0/+13
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two driver core fixes for 4.15-rc6, resolving some reported issues. The first is a cacheinfo fix for DT based systems to resolve a reported issue that has been around for a while, and the other is to resolve a regression in the kobject uevent code that showed up in 4.15-rc1. Both have been in linux-next for a while with no reported issues" * tag 'driver-core-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: fix suppressing modalias in uevents delivered over netlink drivers: base: cacheinfo: fix cache type for non-architected system cache
| * | | | drivers: base: cacheinfo: fix cache type for non-architected system cacheSudeep Holla2017-12-151-0/+13
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") doesn't initialise the cache type if it's present only in DT and the architecture is not aware of it. They are unified system level cache which are generally transparent. This patch check if the cache type is set to NOCACHE but the DT node indicates that it's unified cache and sets the cache type accordingly. Fixes: dfea747d2aba ("drivers: base: cacheinfo: support DT overrides for cache properties") Reported-and-tested-by: Tan Xiaojun <tanxiaojun@huawei.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'staging-4.15-rc6' of ↵Linus Torvalds2017-12-314-20/+24
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are three staging driver fixes for 4.15-rc6 The first resolves a bug in the lustre driver that came about due to a broken cleanup patch, due to crazy list usage in that codebase. The remaining two are ion driver fixes, finally getting the CMA interaction to work properly, resolving two regressions in that area of the code. All have been in linux-next with no reported issues for a while" * tag 'staging-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device staging: ion: Fix ion_cma_heap allocations staging: lustre: lnet: Fix recent breakage from list_for_each conversion
| * | | | staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/deviceSushmita Susheelendra2017-12-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the direction argument passed into begin_cpu_access and end_cpu_access when calling the dma_sync_sg_for_cpu/device. The actual cache primitive called depends on the direction passed in. Signed-off-by: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: stable <stable@vger.kernel.org> Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | staging: ion: Fix ion_cma_heap allocationsJohn Stultz2017-12-192-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In trying to add support for drm_hwcomposer to HiKey, I've needed to utilize the ION CMA heap, and I've noticed problems with allocations on newer kernels failing. It seems back with 204f672255c2 ("ion: Use CMA APIs directly"), the ion_cma_heap code was modified to use the CMA API, but kept the arguments as buffer lengths rather then number of pages. This results in errors as we don't have enough pages in CMA to satisfy the exaggerated requests. This patch converts the ion_cma_heap CMA API usage to properly request pages. It also fixes a minor issue in the allocation where in the error path, the cma_release is called with the buffer->size value which hasn't yet been set. Cc: Laura Abbott <labbott@redhat.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Dmitry Shmidt <dimitrysh@google.com> Cc: Todd Kjos <tkjos@google.com> Cc: Amit Pundir <amit.pundir@linaro.org> Fixes: 204f672255c2 ("staging: android: ion: Use CMA APIs directly") Acked-by: Laura Abbott <labbott@redhat.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | staging: lustre: lnet: Fix recent breakage from list_for_each conversionNeilBrown2017-12-191-13/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8e55b6fd0660 ("staging: lustre: lnet: replace list_for_each with list_for_each_entry") was intended to be an idempotent change, but actually broke the behavior of ksocknal_add_peer() causing mounts to fail. The fact that it caused an existing "route2 = NULL;" to become redundant could have been a clue. The fact that the loop body set the new loop variable to NULL might also have been a clue The original code relied on "route2" being NULL if nothing was found. The new code would always set route2 to a non-NULL value if the list was empty, and would likely crash if the list was not empty. Restore correct functionality by using code-flow rather the value of "route2" to determine whether to use on old route, or to add a new one. Fixes: 8e55b6fd0660 ("staging: lustre: lnet: replace list_for_each with list_for_each_entry") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | Merge tag 'tty-4.15-rc6' of ↵Linus Torvalds2017-12-311-2/+2
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull TTY fix from Greg KH: "Here is a single tty fix for a reported issue that you wrote the patch for :) It's been in linux-next for a week or so with no reported issues" * tag 'tty-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)
| * | | | | n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)Linus Torvalds2017-12-211-2/+2
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We added support for EXTPROC back in 2010 in commit 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") and the intent was to allow it to override some (all?) ICANON behavior. Quoting from that original commit message: There is a new bit in the termios local flag word, EXTPROC. When this bit is set, several aspects of the terminal driver are disabled. Input line editing, character echo, and mapping of signals are all disabled. This allows the telnetd to turn off these functions when in linemode, but still keep track of what state the user wants the terminal to be in. but the problem turns out that "several aspects of the terminal driver are disabled" is a bit ambiguous, and you can really confuse the n_tty layer by setting EXTPROC and then causing some of the ICANON invariants to no longer be maintained. This fixes at least one such case (TIOCINQ) becoming unhappy because of the confusion over whether ICANON really means ICANON when EXTPROC is set. This basically makes TIOCINQ match the case of read: if EXTPROC is set, we ignore ICANON. Also, make sure to reset the ICANON state ie EXTPROC changes, not just if ICANON changes. Fixes: 26df6d13406d ("tty: Add EXTPROC support for LINEMODE") Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Reported-by: syzkaller <syzkaller@googlegroups.com> Cc: Jiri Slaby <jslaby@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | | Merge tag 'usb-4.15-rc6' of ↵Linus Torvalds2017-12-3122-101/+111
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.15-rc6. Nothing major, but there are a number of regression fixes in here that resolve issues that have been reported a bunch. There are also the usual xhci fixes as well as a number of new usb serial device ids. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201 xhci: Fix use-after-free in xhci debugfs xhci: Fix xhci debugfs NULL pointer dereference in resume from hibernate USB: serial: ftdi_sio: add id for Airbus DS P8GR usb: Add device quirk for Logitech HD Pro Webcam C925e usb: add RESET_RESUME for ELSA MicroLink 56K usbip: fix usbip bind writing random string after command in match_busid usbip: stub_rx: fix static checker warning on unnecessary checks usbip: prevent leaking socket pointer address in messages usbip: stub: stop printing kernel pointer addresses in messages usbip: vhci: stop printing kernel pointer addresses in messages USB: Fix off by one in type-specific length check of BOS SSP capability USB: serial: option: adding support for YUGA CLM920-NC5 phy: rcar-gen3-usb2: select USB_COMMON phy: rockchip-typec: add pm_runtime_disable in err case phy: cpcap-usb: Fix platform_get_irq_byname's error checking. phy: tegra: fix device-tree node lookups USB: serial: qcserial: add Sierra Wireless EM7565 USB: serial: option: add support for Telit ME910 PID 0x1101 USB: chipidea: msm: fix ulpi-node lookup
| * | | | | usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201Daniel Thompson2017-12-271-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When plugging in a USB webcam I see the following message: xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? handle_tx_event: 913 callbacks suppressed All is quiet again with this patch (and I've done a fair but of soak testing with the camera since). Cc: <stable@vger.kernel.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 17:33:27 +0100