summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* iommu/io-pgtable-arm-v7s: Convert to IOMMU API TLB syncRobin Murphy2017-10-023-6/+23
| | | | | | | | | | | | | | | Now that the core API issues its own post-unmap TLB sync call, push that operation out from the io-pgtable-arm-v7s internals into the users. For now, we leave the invalidation implicit in the unmap operation, since none of the current users would benefit much from any change to that. Note that the conversion of msm_iommu is implicit, since that apparently has no specific TLB sync operation anyway. CC: Yong Wu <yong.wu@mediatek.com> CC: Rob Clark <robdclark@gmail.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/io-pgtable-arm: Convert to IOMMU API TLB syncRobin Murphy2017-10-024-11/+36
| | | | | | | | | | | | Now that the core API issues its own post-unmap TLB sync call, push that operation out from the io-pgtable-arm internals into the users. For now, we leave the invalidation implicit in the unmap operation, since none of the current users would benefit much from any change to that. CC: Magnus Damm <damm+renesas@opensource.se> CC: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Don't try to copy anchor nodesRobin Murphy2017-10-021-0/+3
| | | | | | | | | | | | Anchor nodes are not reserved IOVAs in the way that copy_reserved_iova() cares about - while the failure from reserve_iova() is benign since the target domain will already have its own anchor, we still don't want to be triggering spurious warnings. Reported-by: kernel test robot <fengguang.wu@intel.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Fixes: bb68b2fbfbd6 ('iommu/iova: Add rbtree anchor node') Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Try harder to allocate from rcache magazineRobin Murphy2017-09-281-3/+12
| | | | | | | | | | | | | | | | | When devices with different DMA masks are using the same domain, or for PCI devices where we usually try a speculative 32-bit allocation first, there is a fair possibility that the top PFN of the rcache stack at any given time may be unsuitable for the lower limit, prompting a fallback to allocating anew from the rbtree. Consequently, we may end up artifically increasing pressure on the 32-bit IOVA space as unused IOVAs accumulate lower down in the rcache stacks, while callers with 32-bit masks also impose unnecessary rbtree overhead. In such cases, let's try a bit harder to satisfy the allocation locally first - scanning the whole stack should still be relatively inexpensive. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Make rcache limit_pfn handling more robustRobin Murphy2017-09-281-3/+3
| | | | | | | | | | | | | When popping a pfn from an rcache, we are currently checking it directly against limit_pfn for viability. Since this represents iova->pfn_lo, it is technically possible for the corresponding iova->pfn_hi to be greater than limit_pfn. Although we generally get away with it in practice since limit_pfn is typically a power-of-two boundary and the IOVAs are size-aligned, it's pretty trivial to make the iova_rcache_get() path take the allocation size into account for complete safety. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Simplify domain destructionRobin Murphy2017-09-281-39/+9
| | | | | | | | | | | | All put_iova_domain() should have to worry about is freeing memory - by that point the domain must no longer be live, so the act of cleaning up doesn't need to be concurrency-safe or maintain the rbtree in a self-consistent state. There's no need to waste time with locking or emptying the rcache magazines, and we can just use the postorder traversal helper to clear out the remaining rbtree entries in-place. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Simplify cached node logicRobin Murphy2017-09-271-34/+17
| | | | | | | | | | | | | | | | | The logic of __get_cached_rbnode() is a little obtuse, but then __get_prev_node_of_cached_rbnode_or_last_node_and_update_limit_pfn() wouldn't exactly roll off the tongue... Now that we have the invariant that there is always a valid node to start searching downwards from, everything gets a bit easier to follow if we simplify that function to do what it says on the tin and return the cached node (or anchor node as appropriate) directly. In turn, we can then deduplicate the rb_prev() and limit_pfn logic into the main loop itself, further reduce the amount of code under the lock, and generally make the inner workings a bit less subtle. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Add rbtree anchor nodeRobin Murphy2017-09-271-2/+13
| | | | | | | | | | | Add a permanent dummy IOVA reservation to the rbtree, such that we can always access the top of the address space instantly. The immediate benefit is that we remove the overhead of the rb_last() traversal when not using the cached node, but it also paves the way for further simplifications. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Make dma_32bit_pfn implicitZhen Lei2017-09-277-38/+11
| | | | | | | | | | | | | | | | | | | | | Now that the cached node optimisation can apply to all allocations, the couple of users which were playing tricks with dma_32bit_pfn in order to benefit from it can stop doing so. Conversely, there is also no need for all the other users to explicitly calculate a 'real' 32-bit PFN, when init_iova_domain() can happily do that itself from the page granularity. CC: Thierry Reding <thierry.reding@gmail.com> CC: Jonathan Hunter <jonathanh@nvidia.com> CC: David Airlie <airlied@linux.ie> CC: Sudeep Dutt <sudeep.dutt@intel.com> CC: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> [rm: use iova_shift(), rewrote commit message] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Extend rbtree node cachingRobin Murphy2017-09-271-32/+28
| | | | | | | | | | | | | | | | | | | | The cached node mechanism provides a significant performance benefit for allocations using a 32-bit DMA mask, but in the case of non-PCI devices or where the 32-bit space is full, the loss of this benefit can be significant - on large systems there can be many thousands of entries in the tree, such that walking all the way down to find free space every time becomes increasingly awful. Maintain a similar cached node for the whole IOVA space as a superset of the 32-bit space so that performance can remain much more consistent. Inspired by work by Zhen Lei <thunder.leizhen@huawei.com>. Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Optimise the padding calculationZhen Lei2017-09-271-27/+15
| | | | | | | | | | | | | | | | | | | | The mask for calculating the padding size doesn't change, so there's no need to recalculate it every loop iteration. Furthermore, Once we've done that, it becomes clear that we don't actually need to calculate a padding size at all - by flipping the arithmetic around, we can just combine the upper limit, size, and mask directly to check against the lower limit. For an arm64 build, this alone knocks 20% off the object code size of the entire alloc_iova() function! Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> [rm: simplified more of the arithmetic, rewrote commit message] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* iommu/iova: Optimise rbtree searchingZhen Lei2017-09-271-6/+3
| | | | | | | | | | | | | | | | | Checking the IOVA bounds separately before deciding which direction to continue the search (if necessary) results in redundantly comparing both pfns twice each. GCC can already determine that the final comparison op is redundant and optimise it down to 3 in total, but we can go one further with a little tweak of the ordering (which makes the intent of the code that much cleaner as a bonus). Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> [rm: rewrote commit message to clarify] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds2017-09-241-2/+2
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "A clocksource driver section mismatch fix" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/integrator: Fix section mismatch warning
| * clocksource/integrator: Fix section mismatch warningArnd Bergmann2017-09-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gcc-4.6 and older fail to inline integrator_clocksource_init, so they end up showing a harmless warning: WARNING: vmlinux.o(.text+0x4aa94c): Section mismatch in reference from the function integrator_clocksource_init() to the function .init.text:clocksource_mmio_init() The function integrator_clocksource_init() references the function __init clocksource_mmio_init(). This is often because integrator_clocksource_init lacks a __init annotation or the annotation of clocksource_mmio_init is wrong. Add the missing __init annotation that makes it build cleanly with all compilers. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Thierry Reding <treding@nvidia.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/20170915194310.1170514-1-arnd@arndb.de
* | Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2017-09-243-10/+16
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "Three irqchip driver fixes, and an affinity mask helper function bug fix affecting x86" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "genirq: Restrict effective affinity to interrupts actually using it" irqchip.mips-gic: Fix shared interrupt mask writes irqchip/gic-v4: Fix building with ancient gcc irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()
| * \ Merge tag 'irqchip-4.14-2' of ↵Thomas Gleixner2017-09-213-10/+16
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip updates from Marc Zyngier - A GICv3 initialisation fix when some CPUs fail to be brought up - A GICv4 compile fix for GCC 4.5 (!) - A MIPS-GIC fix for the PCIe support
| | * | irqchip.mips-gic: Fix shared interrupt mask writesPaul Burton2017-09-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The write_gic_smask() & write_gic_rmask() functions take a shared interrupt number as a parameter, but we're incorrectly providing them a bitmask with the shared interrupt's bit set. This effectively means that we mask or unmask the shared interrupt 1<<n rather than shared interrupt n, and as a result likely drop interrupts. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Fixes: 68898c8765f4 ("irqchip: mips-gic: Drop gic_(re)set_mask() functions") Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| | * | irqchip/gic-v4: Fix building with ancient gccArnd Bergmann2017-09-191-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gcc-4.5 and earlier don't like named initializers for anonymous union members: drivers/irqchip/irq-gic-v4.c: In function 'its_map_vlpi': drivers/irqchip/irq-gic-v4.c:176:3: error: unknown field 'map' specified in initializer drivers/irqchip/irq-gic-v4.c:176:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:176:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c: In function 'its_get_vlpi': drivers/irqchip/irq-gic-v4.c:192:3: error: unknown field 'map' specified in initializer drivers/irqchip/irq-gic-v4.c:192:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:192:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c: In function 'its_prop_update_vlpi': drivers/irqchip/irq-gic-v4.c:208:3: error: unknown field 'config' specified in initializer drivers/irqchip/irq-gic-v4.c:208:3: error: missing braces around initializer drivers/irqchip/irq-gic-v4.c:208:3: error: (near initialization for 'info.<anonymous>') drivers/irqchip/irq-gic-v4.c:208:3: error: initialization makes pointer from integer without a cast This is fairly easy to work around, by using extra curly braces. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
| | * | irqchip/gic-v3: Iterate over possible CPUs by for_each_possible_cpu()zijun_hu2017-09-191-4/+4
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | get_cpu_number() doesn't use existing helper to iterate over possible CPUs, It will cause an error in case of discontinuous @cpu_possible_mask such as 0b11110001, which can result from a core having failed to come up on a SMP machine. Fixed by using existing helper for_each_possible_cpu(). Signed-off-by: zijun_hu <zijun_hu@htc.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* | | Merge branch 'next-tpm' of ↵Linus Torvalds2017-09-247-52/+83
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM updates from James Morris: "Here are the TPM updates from Jarkko for v4.14, which I've placed in their own branch (next-tpm). I ended up cherry-picking them as other changes had been made in Jarkko's branch after he sent me his original pull request. I plan on maintaining a separate branch for TPM (and other security subsystems) from now on. From Jarkko: 'Not much this time except a few fixes'" * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: ibmvtpm: simplify crq initialization and document crq format tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers Documentation: tpm: add powered-while-suspended binding documentation tpm: tpm_crb: constify acpi_device_id. tpm: vtpm: constify vio_device_id
| * | | tpm: ibmvtpm: simplify crq initialization and document crq formatMichal Suchanek2017-09-241-36/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The crq is passed in registers and is the same on BE and LE hosts. However, current implementation allocates a structure on-stack to represent the crq, initializes the members swapping them to BE, and loads the structure swapping it from BE. This is pointless and causes GCC warnings about ununitialized members. Get rid of the structure and the warnings. Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
| * | | tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic driversHamza Attak2017-09-245-14/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch simply replaces all msleep function calls with usleep_range calls in the generic drivers. Tested with an Infineon TPM 1.2, using the generic tpm-tis module, for a thousand PCR extends, we see results going from 1m57s unpatched to 40s with the new patch. We obtain similar results when using the original and patched tpm_infineon driver, which is also part of the patch. Similarly with a STM TPM 2.0, using the CRB driver, it takes about 20ms per extend unpatched and around 7ms with the new patch. Note that the PCR consistency is untouched with this patch, each TPM has been tested with 10 million extends and the aggregated PCR value is continuously verified to be correct. As an extension of this work, this could potentially and easily be applied to other vendor's drivers. Still, these changes are not included in the proposed patch as they are untested. Signed-off-by: Hamza Attak <hamza@hpe.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
| * | | tpm: tpm_crb: constify acpi_device_id.Arvind Yadav2017-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | acpi_device_id are not supposed to change at runtime. All functions working with acpi_device_id provided by <acpi/acpi_bus.h> work with const acpi_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 4198 608 0 4806 12c6 drivers/char/tpm/tpm_crb.o File size After adding 'const': text data bss dec hex filename 4262 520 0 4782 12ae drivers/char/tpm/tpm_crb.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
| * | | tpm: vtpm: constify vio_device_idArvind Yadav2017-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | vio_device_id are not supposed to change at runtime. All functions working with vio_device_id provided by <asm/vio.h> work with const vio_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: James Morris <james.l.morris@oracle.com>
* | | | Merge tag 'for-linus' of ↵Linus Torvalds2017-09-2317-161/+281
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: - Smattering of miscellanous fixes - A five patch series for i40iw that had a patch (5/5) that was larger than I would like, but I took it because it's needed for large scale users - An 8 patch series for bnxt_re that landed right as I was leaving on PTO and so had to wait until now...they are all appropriate fixes for -rc IMO * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (22 commits) bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is destroyed bnxt_re: Fix memory leak in FRMR path bnxt_re: Remove RTNL lock dependency in bnxt_re_query_port bnxt_re: Fix race between the netdev register and unregister events bnxt_re: Free up devices in module_exit path bnxt_re: Fix compare and swap atomic operands bnxt_re: Stop issuing further cmds to FW once a cmd times out bnxt_re: Fix update of qplib_qp.mtu when modified i40iw: Add support for port reuse on active side connections i40iw: Add missing VLAN priority i40iw: Call i40iw_cm_disconn on modify QP to disconnect i40iw: Prevent multiple netdev event notifier registrations i40iw: Fail open if there are no available MSI-X vectors RDMA/vmw_pvrdma: Fix reporting correct opcodes for completion IB/bnxt_re: Fix frame stack compilation warning IB/mlx5: fix debugfs cleanup IB/ocrdma: fix incorrect fall-through on switch statement IB/ipoib: Suppress the retry related completion errors iw_cxgb4: remove the stid on listen create failure iw_cxgb4: drop listen destroy replies if no ep found ...
| * | | | bnxt_re: Don't issue cmd to delete GID for QP1 GID entry before the QP is ↵Somnath Kotur2017-09-221-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | destroyed FW needs the 0th GID Entry in the Table to be preserved before it's corresponding QP1 is deleted, else it will fail the cmd. Check for the same and return to prevent error msg being logged for cmd failure. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | bnxt_re: Fix memory leak in FRMR pathSelvin Xavier2017-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a memory leak issue when alloc_mr is used. mr->pages and mr->npages are used only in alloc_mr path. mr->pages is allocated when alloc_mr is called or in the case of FRMR, while creating the MR. mr->npages is updated only when the MR created is used i.e. after invoking map_mr_sg verb, before data transfer. In the dereg_mr path, if mr->npages is 0, driver ends up not freeing the memory created. Removing the npages check from the dereg_mr path for kernel consumers. Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | bnxt_re: Remove RTNL lock dependency in bnxt_re_query_portSomnath Kotur2017-09-223-8/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When there is a NETDEV_UNREGISTER event, bnxt_re driver calls ib_unregister_device() (RTNL lock held). ib_unregister_device attempts to flush a worker queue scheduled by ib_core and that queue might have a pending ib_query_port(). ib_query_port in turn calls bnxt_re_query_port(), which while querying the link speed using ib_get_eth_speed(), tries to acquire the rtnl_lock() which was already held by NETDEV_UNREGISTER. Fixing the issue by removing the link speed query from bnxt_re_query_port() Now the speed is queried post a successful ib_register_device or whenever there is a NETDEV_CHANGE event. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | bnxt_re: Fix race between the netdev register and unregister eventsSomnath Kotur2017-09-222-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upon receipt of the NETDEV_REGISTER event from the netdev notifier chain, the IB stack registration is spawned off to a workqueue since that also requires an rtnl lock. There could be 2 kinds of races between the NETDEV_REGISTER and the NETDEV_UNREGISTER event handling. a)The NETDEV_UNREGISTER event is received in rapid succession after the NETDEV_REGISTER event even before the work queue got a chance to run. b)The NETDEV_UNREGISTER event is received while the workqueue that handles registration with the IB stack is still in progress. Handle both the races with a bit flag that is set just before the work item is queued and cleared in the workqueue after the event is handled just before the workqueue item is freed. While adding the new flag, it was noted that the flags are all used in *_bit() operations which expect a bit number and not a literal constant with a bit set. So change the numbers to be bit numbers. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | bnxt_re: Free up devices in module_exit pathSomnath Kotur2017-09-221-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up all devices added to the bnxt_re_dev_list in the module_exit entry point. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | bnxt_re: Fix compare and swap atomic operandsDevesh Sharma2017-09-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver must assign the user supplied compare/swap values in the wqe to successfully complete the atomic compare and swap operation. Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | bnxt_re: Stop issuing further cmds to FW once a cmd times outSomnath Kotur2017-09-222-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Once a cmd to FW times out(after 20s) it is reasonable to assume the FW or atleast the control path is dead. No point issuing further cmds to the FW as each subsequent cmd with another 20s timeout will cascade resulting in unnecessary traces and/or NMI Lockups. Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | bnxt_re: Fix update of qplib_qp.mtu when modifiedDevesh Sharma2017-09-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MTU value in the qplib_qp.mtu should be consistent with whatever mtu was set during INIT to RTR.The Next PSN and number of packets are calculated based on this member in the qplib_qp structure. Signed-off-by: Narender Reddy <narender.reddy@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | i40iw: Add support for port reuse on active side connectionsShiraz Saleem2017-09-222-76/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During OpenMPI scale up testing, we observe rdma_connect failures if ports are reused on multiple connections. This is because the Control Queue-Pair (CQP) command to add the reused port to Accelerated Port Bit VectorTable (APBVT) fails as there already exists an entry. Check for duplicate port before invoking the CQP command to add APBVT entry and delete the entry only if the port is not in use. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | i40iw: Add missing VLAN priorityMustafa Ismail2017-09-222-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the VLAN priority which is in the upper 3 bits of the VLAN tag field in the QP context. Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | i40iw: Call i40iw_cm_disconn on modify QP to disconnectShiraz Saleem2017-09-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If QP modify to closing/terminate/error fails, connection is not torn down as there is no corresponding asynchronous event that will initiate the teardown. Add explicit call to i40iw_cm_disconn if not waiting in modify QP, otherwise schedule it in CM timer. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | i40iw: Prevent multiple netdev event notifier registrationsShiraz Saleem2017-09-223-19/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Netdev event notifier registration/de-registration is not synchronized with a lock and there is a possibility of a duplicate registration of notifier before the unregister completes. Register netdev event notifiers during module init and de-register them at module exit. This avoids the need to tie the registration to first netdev client interface open and de-registration to last client interface close and the synchronization to achieve it. This also fixes a crash due to duplicate registration. BUG: unable to handle kernel paging request at ffffffffa0d60388 IP: [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 PGD 190d067 PUD 190e063 PMD 76c840067 PTE 0 Oops: 0000 [#1] SMP Modules linked in: i40e(OF-) fuse btrfs zlib_deflate raid6_pq xor vfat msdos [..] e1000e vxlan ip_tunnel ptp pps_core i2c_core video [last unloaded: i40iw] CPU: 1 PID: 27101 Comm: modprobe Tainted: GF W O-------------- 3.10.0-229.el7.x86_64 #1 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 task: ffff88076e8a96c0 ti: ffff8806959c8000 task.ti: ffff8806959c8000 RIP: 0010:[<ffffffff8160f75d>] [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 RSP: 0018:ffff8806959cbb38 EFLAGS: 00010282 RAX: ffffffffa0d60380 RBX: 00000000fffffffd RCX: 0000000000000000 0708] RDX: 0000000000000000 RSI: ffff88081227a000 RDI: 0000000000000002 RBP: ffff8806959cbb60 R08: 0000000000000246 R09: 000000000000700c R10: ffff88080e16ea40 R11: 00000000000ae8df R12: ffffffffa0d60380 R13: 0000000000000002 R14: ffff88076e738800 R15: 0000000000000000 FS: 00007f604ef4a740(0000) GS:ffff88083e240000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa0d60388 CR3: 0000000753cd2000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffffffff819e73a0 0000000000000000 0000000000000002 ffff88076e738800 00000000ffffffff ffff8806959cbba0 ffffffff8109d61d 0000000000000000 0000000000000000 ffff88076e738800 0000000000000000 ffff88076e738800 Call Trace: [<ffffffff8109d61d>] __blocking_notifier_call_chain+0x4d/0x70 [<ffffffff8109d656>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff8156b9e4>] __inet_del_ifa+0x154/0x2b0 [<ffffffff8156d102>] inetdev_event+0x182/0x530 [<ffffffff8160f76c>] notifier_call_chain+0x4c/0x70 [<ffffffff8109d446>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814f71fd>] call_netdevice_notifiers+0x2d/0x60 [<ffffffff814f8845>] rollback_registered_many+0x105/0x220 [<ffffffff814f89a0>] rollback_registered+0x40/0x70 [<ffffffff814f9c88>] unregister_netdevice_queue+0x48/0x80 [<ffffffff814f9cdc>] unregister_netdev+0x1c/0x30 [<ffffffffa0067139>] i40e_vsi_release+0x2a9/0x2b0 [i40e] [<ffffffffa00674e8>] i40e_remove+0x128/0x2b0 [i40e] [<ffffffff813092db>] pci_device_remove+0x3b/0xb0 [<ffffffff813d26ef>] __device_release_driver+0x7f/0xf0 [<ffffffff813d3068>] driver_detach+0xb8/0xc0 [<ffffffff813d22db>] bus_remove_driver+0x9b/0x120 [<ffffffff813d36dc>] driver_unregister+0x2c/0x50 [<ffffffff81307d4c>] pci_unregister_driver+0x2c/0x90 [<ffffffffa008f9d0>] i40e_exit_module+0x10/0x23 [i40e] [<ffffffff810dad0b>] SyS_delete_module+0x16b/0x2d0 [<ffffffff81013b0c>] ? do_notify_resume+0x9c/0xb0 [<ffffffff81613da9>] system_call_fastpath+0x16/0x1b Code: e5 41 57 4d 89 c7 41 56 49 89 d6 41 55 49 89 f5 41 54 53 89 cb 75 14 eb 3d 0f 1f 44 00 00 83 eb 01 74 25 4d 85 e4 74 20 4c 89 e0 <4c> 8b 60 08 4c 89 f2 4c 89 ee 48 89 c7 ff 10 4d 85 ff 74 04 41 RIP [<ffffffff8160f75d>] notifier_call_chain+0x3d/0x70 Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | i40iw: Fail open if there are no available MSI-X vectorsShiraz Saleem2017-09-221-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check number of available MSI-X vectors for i40iw. If there are no available vectors, fail the open. Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | RDMA/vmw_pvrdma: Fix reporting correct opcodes for completionAdit Ranadive2017-09-221-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the IB_WC_BIND_MW opcode has been dropped, set the correct IB WC opcode explicitly. Fixes: 29c8d9eba550 ("IB: Add vmw_pvrdma driver") Reviewed-by: Aditya Sarwade <asarwade@vmware.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: Adit Ranadive <aditr@vmware.com> Signed-off-by: Bryan Tan <bryantan@vmware.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | IB/bnxt_re: Fix frame stack compilation warningLeon Romanovsky2017-09-221-31/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reduce stack size by dynamically allocating memory instead of declaring large struct on the stack: drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function ‘bnxt_re_query_qp’: drivers/infiniband/hw/bnxt_re/ib_verbs.c:1600:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=] } ^ Cc: Selvin Xavier <selvin.xavier@broadcom.com> Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Signed-off-by: Leon Romanovsky <leon@kernel.org> Acked-by: Selvin Xavier <selvin.xavier@broadcom.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | IB/mlx5: fix debugfs cleanupSudip Mukherjee2017-09-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If delay_drop_debugfs_init() fails in any of the operations to create debugfs, it is calling delay_drop_debugfs_cleanup() as part of its cleanup. But delay_drop_debugfs_cleanup() checks for 'dbg' and since we have not yet pointed 'dbg' to the debugfs we need to cleanup, the cleanup fails and we are left with stray debugfs elements and also a memory leak. Fixes: 4a5fd5d2965c ("IB/mlx5: Add necessary delay drop assignment") Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Acked-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | IB/ocrdma: fix incorrect fall-through on switch statementColin Ian King2017-09-221-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the case where mbox_status is OCRDMA_MBX_STATUS_FAILED and add_status is OCRDMA_MBX_STATUS_FAILED err_num is assigned -EAGAIN however the case OCRDMA_MBX_STATUS_FAILED is missing a break and falls through to the default case which then re-assigns err_num to -EFAULT. Fix this so that err_num is assigned to -EAGAIN for the add_status OCRDMA_MBX_STATUS_FAILED case and -EFAULT otherwise. Detected by CoverityScan CID#703125 ("Missing break in switch") Fixes: fe2caefcdf58 ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | IB/ipoib: Suppress the retry related completion errorsSantosh Shilimkar2017-09-221-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | IPoIB doesn't support transport/rnr retry schemes as per RFC so those errors are expected. No need to flood the log files with them. Tested-by: Michael Nowak <michael.nowak@oracle.com> Tested-by: Rafael Alejandro Peralez <rafael.peralez@oracle.com> Tested-by: Liwen Huang <liwen.huang@oracle.com> Tested-by: Hong Liu <hong.x.liu@oracle.com> Reviewed-by: Mukesh Kacker <mukesh.kacker@oracle.com> Reported-by: Rajiv Raja <rajiv.raja@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | iw_cxgb4: remove the stid on listen create failureSteve Wise2017-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a listen create fails, then the server tid (stid) is incorrectly left in the stid idr table, which can cause a touch-after-free if the stid is looked up and the already freed endpoint is touched. So make sure and remove it in the error path. Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | iw_cxgb4: drop listen destroy replies if no ep foundSteve Wise2017-09-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the thread waiting for a CLOSE_LISTSRV_RPL times out and bails, then we need to handle a subsequent CPL if it arrives and the stid has been released. In this case silently drop it. Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | iw_cxgb4: put ep reference in pass_accept_req()Steve Wise2017-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The listening endpoint should always be dereferenced at the end of pass_accept_req(). Fixes: f86fac79afec ("RDMA/iw_cxgb4: atomic find and reference for listening endpoints") Cc: stable@vger.kernel.org Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
| * | | | IB/core: Fix for core panicAlex Estrin2017-09-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Build with the latest patches resulted in panic: 11384.486289] BUG: unable to handle kernel NULL pointer dereference at (null) [11384.486293] IP: (null) [11384.486295] PGD 0 [11384.486295] P4D 0 [11384.486296] [11384.486299] Oops: 0010 [#1] SMP ......... snip ...... [11384.486401] CPU: 0 PID: 968 Comm: kworker/0:1H Tainted: G W O 4.13.0-a-stream-20170825 #1 [11384.486402] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015 [11384.486418] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] [11384.486419] task: ffff880850579680 task.stack: ffffc90007fec000 [11384.486420] RIP: 0010: (null) [11384.486420] RSP: 0018:ffffc90007fef970 EFLAGS: 00010206 [11384.486421] RAX: ffff88084cfe8000 RBX: ffff88084dce4000 RCX: ffffc90007fef978 [11384.486422] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88084cfe8000 [11384.486422] RBP: ffffc90007fefab0 R08: 0000000000000000 R09: ffff88084dce4080 [11384.486423] R10: ffffffffa02d7f60 R11: 0000000000000000 R12: ffff88105af65a00 [11384.486423] R13: ffff88084dce4000 R14: 000000000000c000 R15: 000000000000c000 [11384.486424] FS: 0000000000000000(0000) GS:ffff88085f400000(0000) knlGS:0000000000000000 [11384.486425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [11384.486425] CR2: 0000000000000000 CR3: 0000000001c09000 CR4: 00000000001406f0 [11384.486426] Call Trace: [11384.486431] ? is_valid_mcast_lid.isra.21+0xfb/0x110 [ib_core] [11384.486436] ib_attach_mcast+0x6f/0xa0 [ib_core] [11384.486441] ipoib_mcast_attach+0x81/0x190 [ib_ipoib] [11384.486443] ipoib_mcast_join_complete+0x354/0xb40 [ib_ipoib] [11384.486448] mcast_work_handler+0x330/0x6c0 [ib_core] [11384.486452] join_handler+0x101/0x220 [ib_core] [11384.486455] ib_sa_mcmember_rec_callback+0x54/0x80 [ib_core] [11384.486459] recv_handler+0x3a/0x60 [ib_core] [11384.486462] ib_mad_recv_done+0x423/0x9b0 [ib_core] [11384.486466] __ib_process_cq+0x5d/0xb0 [ib_core] [11384.486469] ib_cq_poll_work+0x20/0x60 [ib_core] [11384.486472] process_one_work+0x149/0x360 [11384.486474] worker_thread+0x4d/0x3c0 [11384.486487] kthread+0x109/0x140 [11384.486488] ? rescuer_thread+0x380/0x380 [11384.486489] ? kthread_park+0x60/0x60 [11384.486490] ? kthread_park+0x60/0x60 [11384.486493] ret_from_fork+0x25/0x30 [11384.486493] Code: Bad RIP value. [11384.486493] Code: Bad RIP value. [11384.486496] RIP: (null) RSP: ffffc90007fef970 [11384.486497] CR2: 0000000000000000 [11384.486531] ---[ end trace b1acec6fb4ff6e75 ]--- [11384.532133] Kernel panic - not syncing: Fatal exception [11384.536541] Kernel Offset: disabled [11384.969491] ---[ end Kernel panic - not syncing: Fatal exception [11384.976875] sched: Unexpected reschedule of offline CPU#1! [11384.983646] ------------[ cut here ]------------ Rdma device driver may not have implemented (*get_link_layer)() so it can not be called directly. Should use appropriate helper function. Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com> Fixes: 523633359224 ("IB/core: Fix the validations of a multicast LID in attach or detach operations") Cc: stable@kernel.org # 4.13 Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
* | | | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2017-09-2328-215/+357
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Fix NAPI poll list corruption in enic driver, from Christian Lamparter. 2) Fix route use after free, from Eric Dumazet. 3) Fix regression in reuseaddr handling, from Josef Bacik. 4) Assert the size of control messages in compat handling since we copy it in from userspace twice. From Meng Xu. 5) SMC layer bug fixes (missing RCU locking, bad refcounting, etc.) from Ursula Braun. 6) Fix races in AF_PACKET fanout handling, from Willem de Bruijn. 7) Don't use ARRAY_SIZE on spinlock array which might have zero entries, from Geert Uytterhoeven. 8) Fix miscomputation of checksum in ipv6 udp code, from Subash Abhinov Kasiviswanathan. 9) Push the ipv6 header properly in ipv6 GRE tunnel driver, from Xin Long. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (75 commits) inet: fix improper empty comparison net: use inet6_rcv_saddr to compare sockets net: set tb->fast_sk_family net: orphan frags on stand-alone ptype in dev_queue_xmit_nit MAINTAINERS: update git tree locations for ieee802154 subsystem net: prevent dst uses after free net: phy: Fix truncation of large IRQ numbers in phy_attached_print() net/smc: no close wait in case of process shut down net/smc: introduce a delay net/smc: terminate link group if out-of-sync is received net/smc: longer delay for client link group removal net/smc: adapt send request completion notification net/smc: adjust net_device refcount net/smc: take RCU read lock for routing cache lookup net/smc: add receive timeout check net/smc: add missing dev_put net: stmmac: Cocci spatch "of_table" lan78xx: Use default values loaded from EEPROM/OTP after reset lan78xx: Allow EEPROM write for less than MAX_EEPROM_SIZE lan78xx: Fix for eeprom read/write when device auto suspend ...
| * | | | | net: phy: Fix truncation of large IRQ numbers in phy_attached_print()Geert Uytterhoeven2017-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Given NR_IRQS is 2048 on sparc64, and even 32784 on alpha, 3 digits is not enough to represent interrupt numbers on all architectures. Hence PHY interrupt numbers may be truncated during printing. Increase the buffer size from 4 to 8 bytes to fix this. Fixes: 5e369aefdce4818c ("net: stmmac: Delete dead code for MDIO registration") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net: stmmac: Cocci spatch "of_table"Thomas Meyer2017-09-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure (of/i2c/platform)_device_id tables are NULL terminated. Found by coccinelle spatch "misc/of_table.cocci" Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-24 03:27:14 +0100