summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* net: smc91x: use run-time configuration on all ARM machinesArnd Bergmann2015-02-282-113/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The smc91x driver traditionally gets configured at compile-time for whichever hardware it runs on. This no longer works on ARM as we continue to move to building all-in-one kernels. Most ARM configurations with this driver already use run-time configuration through DT or through platform_data, but a few have not been converted yet. I've checked all ARM boards that use this driver in their legacy board files, and converted the ones that were using compile-time configuration in smc91x.h to behave like the other ones and provide the interrupt polarity along with the MMIO configuration (width, stride) at platform device creation time. In particular, these combinations were previously selectable in Kconfig but in fact broken: - sa1100 assabet plus pleb - msm combined with any other armv6/v7 platform - pxa-idp combined with any non-DMA pxa variant - LogicPD PXA270 combined with any other pxa - nomadik combined with any other armv4/v5 platform, e.g. versatile. None of these seem critical enough to warrant a backport to stable, but it would be nice to clean this up for good. Signed-off-by: Arnd Bergmann <arnd@arndb.de> ---- I would like the patch to get merged through netdev, after Robert and/or Linus have verified it on at least some hardware. There are a few other non-ARM platforms using this driver, I could do the same patch for those if we want to take it further. arch/arm/mach-msm/board-halibut.c | 8 ++++- arch/arm/mach-msm/board-qsd8x50.c | 8 ++++- arch/arm/mach-pxa/idp.c | 5 +++ arch/arm/mach-pxa/lpd270.c | 8 ++++- arch/arm/mach-realview/core.c | 7 ++++ arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-sa1100/neponset.c | 6 ++++ arch/arm/mach-sa1100/pleb.c | 7 ++++ drivers/net/ethernet/smsc/smc91x.c | 9 +++-- drivers/net/ethernet/smsc/smc91x.h | 114 ++---------------------------------------------------------- 10 files changed, 57 insertions(+), 117 deletions(-) Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'master' of ↵David S. Miller2015-02-279-76/+280
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2015-02-26 This series contains fixes for i40e and i40evf only. Alexey Khoroshilov found a possible leak of 'cmd_buf' when copy_from_user() failed in i40e_dbg_command_write(), so resolved by calling kfree(). Shannon provides a fix to ensure the shift and bitwise precedences do not work backwards for us by adding parans. Fixed the driver by preventing the driver from allowing stray interrupts or causing system logs from un-handled interrupts by combining the ICR0 shutdown with the standard interrupt shutdown and add the interrupt clearing to the PCI shutdown path. Fixed an issue where a NVM write times out before a transaction can complete, so Shannon added logic to make another attempt by reacquiring the semaphore, then retry the write, if the one retry fails, we will then give up. Adds checks to pointers before their use to ensure we do not try to dereference NULL pointers when returning values from the AdminQ calls. Akeem adds a check to bail out if the device is already down when checking for Tx hang subtask. Anjali fixes TSO with more than 8 frags per segment issue. The hardware has some limitations which the driver needs to adhere to: 1) no more than 8 descriptors per packet on the wire 2) no header can span more than 3 descriptors If one of these events happens, the hardware will generate an internal error and freeze the Tx queue, so Anjali fixes this by linearizes the skb to avoid these situations. Fixed an issue where the per Traffic Class queue count was higher than queues enabled, which will fix a warning with multiple function mode where systems regularly have more cores than vectors. Fixed TCP/IPv6 over VXLAN Tx checksum offload, where we were checking the outer protocol flags and deciding the flow for the inner header. Jesse fixes a race condition in the transmit hang detection. Before we were having issues of false Tx hang detection, no the driver makes more direct with the checks for progress forward by directly checking the head write back address and tail register when determining progress. This avoids Tx hangs where the software gets behind, because we are directly checking hardware state when determining a hang state. Neerav fixes the transmit ring Qset handle when DCB reconfigures. The issue was when DCB is reconfigured to a single traffic class (TC) and the driver did not reset the Tx ring Qset handle to correct the mapping, which caused the Tx queue to disable timeouts. Also as part of DCB reconfiguration flow if the Tx queue disable times out, then issue a PF reset to do some level of recovery. Mitch stops flow director on shutdown because, in some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon the system configuration. * NOTE * I have verified that this series of patches for net will not cause any merge issues when you sync up your net tree with your net-next tree. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * i40e: check pointers before useShannon Nelson2015-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | Make sure we don't try to dereference NULL pointers when returning values from the AdminQ calls. Change-ID: Ia6694f2f415d50acf0aba063c863568742799aff Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: catch NVM write semaphore timeout and retryShannon Nelson2015-02-261-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | In some circumstances, a multi-write transaction takes longer than the default 3 minute timeout on the write semaphore. If the write failed with an EBUSY status, this is likely the problem, so here we try to reacquire the semaphore then retry the write. We only do one retry, then give up. Change-ID: I1c8be60688acc2f39573839579baf601207c4a36 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: stop flow director on shutdownMitch A Williams2015-02-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | In some cases, the hardware would continue to try to access the FDIR ring after entering D3Hot state, which would cause either PCIe errors or NMIs, depending upon system configuration. Explicitly stop FDIR in our shutdown routine to eliminate this possibility. Change-ID: I1bd9fc7fd8f151fe24cad132ac9adddab923e3af Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: disconnect irqs on shutdownShannon Nelson2015-02-261-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Combine the ICR0 shutdown with the standard interrupt shutdown, and add the interrupt clearing to the PCI shutdown path. This prevents the driver from allowing stray interrupts or causing system logs from un-handled interrupts. Change-ID: I48f6ab95cad7f8ca77c1f26c92a51cc1034ced43 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40evf: TCP/IPv6 over Vxlan Tx checksum offload fixAnjali Singhai2015-02-261-12/+12
| | | | | | | | | | | | | | | | | | | | We were checking the outer Protocol flags and deciding the flow for inner header. This patch fixes that. This fixes the Tx checksum offload for TCP/IPv6 over vxlan. Change-ID: I837aaea921d34f71b24c2bc32aaadea5001ddf78 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Issue a PF reset if Tx queue disable timeoutParikh, Neerav2015-02-261-1/+7
| | | | | | | | | | | | | | | | | | As part of DCB reconfiguration flow if the Tx queue disable times out then issue a PF reset to do some level of recovery. Change-ID: I7550021c55bff355351c0365e61e1f05fcaff46d Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Fix the Tx ring qset handle when DCB reconfiguresParikh, Neerav2015-02-261-2/+9
| | | | | | | | | | | | | | | | | | | | When DCB is reconfigured to single TC the driver did not reset the Tx ring Qset handle to the correct mapping; which caused Tx queue disable timeouts. Change-ID: I4da5915ec92a83c281b478d653fae6ef1b72edfe Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Fix the case where per TC queue count was higher than queues enabledAnjali Singhai2015-02-261-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the driver or hardware gets less interrupt vectors than the actual number of CPU cores, limit the queue count for the priority queue traffic class (TC) queues. This will fix a warning with multiple function mode where systems regularly have more cores than vectors. Also add extra comment for readability. Change-ID: I4f02226263aa3995e1f5ee5503eac0cd6ee12fbd Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: fix race in hang checkJesse Brandeburg2015-02-262-48/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver was having some issues with false Tx hang detection. This makes the driver a little more direct with the checks for progress forward by directly checking the head write back address and tail register when determining progress. This avoids Tx hangs where the software gets behind, because we are directly checking hardware state when determining hang state. Change-ID: I774f0e861c9e8ab5ccb213634100fe15440ae24a Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Fix TSO with more than 8 frags per segment issueAnjali Singhai2015-02-264-0/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The hardware has some limitations the driver needs to adhere to, that we found in extended testing. 1) no more than 8 descriptors per packet on the wire 2) no header can span more than 3 descriptors If one of these events occurs, the hardware will generate an internal error and freeze the Tx queue. This patch linearizes the skb to avoid these situations. Change-ID: I37dab7d3966e14895a9663ec4d0aaa8eb0d9e115 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Don't check for Tx hang when PF downAkeem G Abodunrin2015-02-261-1/+2
| | | | | | | | | | | | | | | | | | | | This patch adds check to bail out if device is already down when checking for Tx hang subtask. Change-ID: I3853fb7a6d11cb9a4c349b687cb25c15b19977a0 Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: fix shift precedence issueShannon Nelson2015-02-262-3/+4
| | | | | | | | | | | | | | | | | | | | | | Add parens to make sure the shift and bitwise precedences don't work backwards for us. Change-ID: I60c10ef4fad6bc654522b9d8a53da2e270a0f268 Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
| * i40e: Fix memory leak at failure path in i40e_dbg_command_write()Alexey Khoroshilov2015-02-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | The patch fixes a leak of 'cmd_buf' when copy_from_user() failed in i40e_dbg_command_write(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* | amd-xgbe: Request IRQs only after driver is fully setupLendacky, Thomas2015-02-271-82/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is possible that the hardware may not have been properly shutdown before this driver gets control, through use by firmware, for example. Until the driver is loaded, interrupts associated with the hardware could go pending. When the IRQs are requested napi support has not been initialized yet, but the ISR will get control and schedule napi processing resulting in a kernel panic because the poll routine has not been set. Adjust the code so that the driver is fully ready to handle and process interrupts as soon as the IRQs are requested. This involves requesting and freeing IRQs during start and stop processing and ordering the napi add and delete calls appropriately. Also adjust the powerup and powerdown routines to match the start and stop routines in regards to the ordering of tasks, including napi related calls. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: asix: add support for the Sitecom LN-028 USB adapterLuca Ceresoli2015-02-272-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | Just another AX88178-based 10/100/1000 USB-to-Ethernet dongle. This one shows up in lsusb as: "Sitecom Europe B.V. LN-028 Network USB 2.0 Adapter". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-usb@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
* | vhost: drop hard-coded num_buffers sizeMichael S. Tsirkin2015-02-271-1/+2
| | | | | | | | | | | | | | | | | | | | The 2 that we use for copy_to_iter comes from sizeof(u16), it used to be that way before the iov iter update. Fix it up, making it obvious the size of stack access is right. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | vhost: cleanup iterator update logicMichael S. Tsirkin2015-02-271-10/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent iterator-related changes in vhost made it harder to follow the logic fixing up the header. In fact, the fixup always happens at the same offset: sizeof(virtio_net_hdr): sometimes the fixup iterator is updated by copy_to_iter, sometimes-by iov_iter_advance. Rearrange code to make this obvious. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | rocker: silence shift wrapping warningDan Carpenter2015-02-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | "val" is declared as a u64 so static checkers complain that this shift can wrap. I don't have the hardware but probably it's doesn't have over 31 ports. Still we may as well silence the warning even if it's not a real bug. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | rocker: add a check for NULL in rocker_probe_ports()Dan Carpenter2015-02-271-0/+2
| | | | | | | | | | | | | | | | | | Make sure kmalloc() succeeds. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
* | cxgb4: Fix PCI-E Memory window interface for big-endian systemsHariprasad Shenai2015-02-272-11/+45
| | | | | | | | | | | | | | | | | | | | | | | | When doing reads and writes to adapter memory via the PCI-E Memory Window interface, data gets swizzled on 4-byte boundaries on Big-Endian systems because we need to account for the register read/write interface which incorporates a swizzle onto the Little-Endian PCI-E Bus. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | enic: do notify_check before returning creditsSujith Sankar2015-02-271-2/+2
|/ | | | | | | | | We should complete notify_check before returning the credits. Once we return the credits, adaptor may access the notify data. Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* amd-xgbe-phy: PHY KX/KR mode differencesTom Lendacky2015-02-251-2/+80
| | | | | | | | | | | | | The PHY requires different settings for the Decision Feedback Analyzer (DFE) when running in KX mode vs. KR mode. Update the code to change these settings when changing modes in order to provide a more stable link. Additionally, adjust the 10GbE PQ skew default setting to a more sane value. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* r8169: Fix trivial typo in rtl_check_firmwareYannick Guerrini2015-02-241-1/+1
| | | | | | | Change 'firwmare' to 'firmware' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netback: release pending index before pushing Tx responsesDavid Vrabel2015-02-241-8/+21
| | | | | | | | | | | | | | | | | If the pending indexes are released /after/ pushing the Tx response then a stale pending index may be used if a new Tx request is immediately pushed by the frontend. The may cause various WARNINGs or BUGs if the stale pending index is actually still in use. Fix this by releasing the pending index before pushing the Tx response. The full barrier for the pending ring update is not required since the the Tx response push already has a suitable write barrier. Signed-off-by: David Vrabel <david.vrabel@citrix.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* altera_tse: Fixes in NAPI and interrupt handling pathsVlastimil Setka2015-02-241-23/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | Incorrect NAPI polling caused WARNING at net/core/dev.c net_rx_action. Some stability issues were also seen at high throughput and system load before this patch. This patch contains several changes in altera_tse_main.c: - tse_rx() is fixed to not process more than `limit` frames - tse_poll() is refactored to match NAPI logic - only received frames are counted for return value - removed bogus condition `(rxcomplete >= budget || txcomplete > 0)` - replace by: if (rxcomplete < budget) -> call __napi_complete and enable irq - altera_isr() - replace spin_lock_irqsave() by spin_lock() - we are in isr - use spinlocks just over irq manipulation, not over __napi_schedule - reset IRQ first, then disable and schedule napi This is a cleaned up resubmission from Vlastimil's recent submission. Signed-off-by: Vlastimil Setka <setka@vsis.cz> Signed-off-by: Roman Pisl <rpisl@kky.zcu.cz> Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* altera_tse: Correct typo in obtaining tx_fifo_depth from devicetreeVlastimil Setka2015-02-241-1/+1
| | | | | | | | | | This patch corrects a typo in the way tx_fifo_depth is read from the devicetree. This patch was submitted by Vlastimil about a week ago, and is now cleaned up and resubmitted. Signed-off-by: Vlastimil Setka <setka@vsis.cz> Signed-off-by: Vince Bridgers <vbridger@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* team: fix possible null pointer dereference in team_handle_frameJiri Pirko2015-02-231-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently following race is possible in team: CPU0 CPU1 team_port_del team_upper_dev_unlink priv_flags &= ~IFF_TEAM_PORT team_handle_frame team_port_get_rcu team_port_exists priv_flags & IFF_TEAM_PORT == 0 return NULL (instead of port got from rx_handler_data) netdev_rx_handler_unregister The thing is that the flag is removed before rx_handler is unregistered. If team_handle_frame is called in between, team_port_exists returns 0 and team_port_get_rcu will return NULL. So do not check the flag here. It is guaranteed by netdev_rx_handler_unregister that team_handle_frame will always see valid rx_handler_data pointer. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device") Signed-off-by: David S. Miller <davem@davemloft.net>
* Bluetooth: btusb: Fix issue with CSR based Intel Wireless controllersMarcel Holtmann2015-02-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Older Wireless controllers from Intel used CSR chips to provide support for Bluetooth. The commit d0ac9eb72 (Bluetooth: btusb: Ignore unknown Intel devices with generic descriptor) disabled these older controllers. To enable them again, put them into the blacklist and mark them clearly as CSR based controllers. T: Bus=02 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07da Rev=78.69 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Reported-by: Kenneth R. Crudup <kenny@panix.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* r8169: Revert BQL and xmit_more support.David S. Miller2015-02-221-23/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are certain regressions which are pointing to these two commits which we are having a hard time resolving. So revert them for now. Specifically this reverts: commit 0bec3b700d106a8b0a34227b2976d1a582f1aab7 Author: Florian Westphal <fw@strlen.de> Date: Wed Jan 7 10:49:49 2015 +0100 r8169: add support for xmit_more and commit 1e918876853aa85435e0f17fd8b4a92dcfff53d6 Author: Florian Westphal <fw@strlen.de> Date: Wed Oct 1 13:38:03 2014 +0200 r8169: add support for Byte Queue Limits There were some attempts by Eric Dumazet to address some obvious problems in the TX flow, to see if they would fix the problems, but none of them seem to help for the regression reporters. Signed-off-by: David S. Miller <davem@davemloft.net>
* wan: cosa: replace current->state by set_current_state()Fabian Frederick2015-02-221-6/+6
| | | | | | | | | | | | | | Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. current->state = TASK_RUNNING is replaced by __set_current_state() Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-By: Jan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
* hso: replace current->state by __set_current_state()Fabian Frederick2015-02-221-1/+1
| | | | | | | | | | | Use helper functions to access current->state. Direct assignments are prone to races and therefore buggy. Thanks to Peter Zijlstra for the exact definition of the problem. Suggested-By: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* mISDN: replace current->state by set_current_state()Fabian Frederick2015-02-221-1/+1
| | | | | | | | | | Use helper function to access current->state. Direct assignments are prone to races and therefore buggy. Thanks to Peter Zijlstra for the exact definition of the problem. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: bcm_sf2: fix 64-bits register readsFlorian Fainelli2015-02-201-1/+1
| | | | | | | | | | | | Reading 64-bits register was not working because we inverted the steps between reading the lower 32-bits of the register and reading the upper 32-bits. Swapping these operations is how the HW guarantees that 64-bits reads are latched correctly. We only have a handful of 64-bits registers for now, mostly MIB counters, so the imapct is low. Fixes: 246d7f773c13 ("net: dsa: add Broadcom SF2 switch driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* cxgb4: Fix incorrect 'c' suffix to %pI4, use %pISc insteadAnish Bhatt2015-02-202-30/+33
| | | | | | | | | | Issue caught by 0-day kernel test infrastructure. Code changed to use sockaddr members so that %pISc can be used instead. Fixes: b5a02f503caa ('cxgb4 : Update ipv6 address handling api') Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: Fix text that talks about ip util supportMahesh Bandewar2015-02-201-1/+1
| | | | | | | | | ipvlan was added into 3.19 release and iproute2 added support for the same in iproute2-3.19 package. Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net/appletalk: LTPC needs virt_to_busArnd Bergmann2015-02-201-1/+1
| | | | | | | | | | | | | | | | | The ltpc driver is rather outdated and does not get built on most platforms because it requires the ISA_DMA_API symbol. However there are some ARM platforms that have ISA_DMA_API but no virt_to_bus, and they get this build error when enabling the ltpc driver. drivers/net/appletalk/ltpc.c: In function 'handlefc': drivers/net/appletalk/ltpc.c:380:2: error: implicit declaration of function 'virt_to_bus' [-Werror=implicit-function-declaration] set_dma_addr(dma,virt_to_bus(ltdmacbuf)); ^ This adds another dependency in Kconfig to avoid that configuration. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: smc91x: improve neponset hackArnd Bergmann2015-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The smc91x driver tries to support multiple platforms at compile time, but they are mutually exclusive at runtime, and not clearly defined. Trying to build for CONFIG_SA1100_ASSABET without CONFIG_ASSABET_NEPONSET results in this link error: drivers/built-in.o: In function `smc_drv_probe': :(.text+0x33310c): undefined reference to `neponset_ncr_frob' since the neponset_ncr_set function is not defined otherwise. Similarly, building for both CONFIG_SA1100_ASSABET and CONFIG_SA1100_PLEB results in a different build error: smsc/smc91x.c: In function 'smc_drv_probe': smsc/smc91x.c:2299:2: error: implicit declaration of function 'neponset_ncr_set' [-Werror=implicit-function-declaration] neponset_ncr_set(NCR_ENET_OSC_EN); ^ smsc/smc91x.c:2299:19: error: 'NCR_ENET_OSC_EN' undeclared (first use in this function) neponset_ncr_set(NCR_ENET_OSC_EN); ^ This is an attempt to fix the call site responsible for both errors, making sure we call the function exactly when the driver is actually trying to run on the assabet/neponset machine. With this patch, I no longer see randconfig build errors in this file. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* ethernet/ixp4xx: prevent allmulti from clobbering promiscDerrick Pallas2015-02-201-1/+1
| | | | | | | | | | | | If both promisc and allmulti are set, promisc should trump allmulti and disable the MAC filter; otherwise, the interface is not really promisc. Previously, this code checked IFF_ALLMULTI prior to and without regard for IFF_PROMISC; if both were set, only multicast and direct unicast traffic would make it through the filter. Signed-off-by: Derrick Pallas <pallas@meraki.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: phy: Fix verification of EEE support in phy_init_eeeGuenter Roeck2015-02-201-3/+20
| | | | | | | | | | | | | | | | | phy_init_eee uses phy_find_setting(phydev->speed, phydev->duplex) to find a valid entry in the settings array for the given speed and duplex value. For full duplex 1000baseT, this will return the first matching entry, which is the entry for 1000baseKX_Full. If the phy eee does not support 1000baseKX_Full, this entry will not match, causing phy_init_eee to fail for no good reason. Fixes: 9a9c56cb34e6 ("net: phy: fix a bug when verify the EEE support") Fixes: 3e7077067e80c ("phy: Expand phy speed/duplex settings array") Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* usb: plusb: Add support for National Instruments host-to-host cableBen Shelton2015-02-201-0/+5
| | | | | | | | The National Instruments USB Host-to-Host Cable is based on the Prolific PL-25A1 chipset. Add its VID/PID so the plusb driver will recognize it. Signed-off-by: Ben Shelton <ben.shelton@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ehea: Register memory hotplug, reboot and crash hooks on adapter probeAnton Blanchard2015-02-191-105/+141
| | | | | | | | | | | | ehea creates memory hotplug, reboot and crash hooks even if there are no adapters in the box. Just create them when we probe our first adapter. [cascardo: use ehea_register_memory_hooks return code] Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'mfd-for-linus-3.20' of ↵Linus Torvalds2015-02-1832-78/+1312
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Changes to existing drivers: - fixr platform device collision; da9052, wm8994-core - regmap configuration amendments; tps65218 - fix runtime PM deadlock; rtsx_usb - remove unused/superfluous code; db8500-prcmu, omap-usb-host - enable watchdog timer; lpc_sch - add start/stop RX URBs helpers; dln2 - remove platform device (DT only); max77686, max77802 - support suspend and resume; dln2 - add Device Tree support; da9063 - extra error checking; intel_soc_pmic - const'ify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic, max77686, lm3533, retu, pcf50633, davinci_voicecodec, smsc-ece1099, tps65218, mc13xxx, tps65217, twl-core, twl6040 New drivers/supported devices: - new driver for Richtek RT5033 - new driver for DA9150 Charger and FuelGauge - new driver for Qualcomm Resource Power Manager (RPM) - add support for the ir-clk into sun6i-prcm - add support for FuelGauge into axp20x" * tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits) mfd: intel_soc_pmic: Add missing error check for devm_kzalloc mfd: rtsx_usb: Defer autosuspend while card exists mfd: devicetree: Add bindings for DA9063 mfd: da9063: Add device tree support regulator: qcom-rpm: Add missing state flag in call to RPM mfd: qcom-rpm: Driver for the Qualcomm RPM mfd: devicetree: bindings: Add Qualcomm RPM DT binding mfd: max77686/802: Remove support for board files mfd: omap-usb-host: Remove some unused functions mfd: twl6040: Constify struct regmap_config and reg_default array mfd: twl-core: Constify struct regmap_config and reg_default array mfd: tps65217: Constify struct regmap_config mfd: mc13xxx: i2c/spi: Constify struct regmap_config mfd: tps65218: Constify struct regmap_config mfd: smsc-ece1099: Constify struct regmap_config mfd: davinci_voicecodec: Constify struct regmap_config mfd: pcf50633: Constify struct regmap_config mfd: retu: Constify struct regmap_config mfd: lm3533: Constify struct regmap_config mfd: max77686: Constify struct regmap_config ...
| * mfd: intel_soc_pmic: Add missing error check for devm_kzallocKiran Padwal2015-02-161-0/+3
| | | | | | | | | | | | | | | | This patch add a missing check on the return value of devm_kzalloc, which would cause a NULL pointer dereference in a OOM situation. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * mfd: rtsx_usb: Defer autosuspend while card existsRoger Tseng2015-01-221-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A card insertion happens after the lastest polling before reader is suspended may never have a chance to be detected. Under current 1-HZ polling interval setting in mmc_core, the worst case of such undetectablility is about 1 second. To further reduce the undetectability, detect card slot again in suspend method and defer the autosuspend if the slot is loaded. The default 2 second autosuspend delay of USB subsystem should let the next polling detects the card. Signed-off-by: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * mfd: da9063: Add device tree supportSteve Twiss2015-01-222-0/+11
| | | | | | | | | | | | | | | | Add device tree support for DA9063 regulators; Real-Time Clock and Watchdog. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * regulator: qcom-rpm: Add missing state flag in call to RPMBjorn Andersson2015-01-221-0/+1
| | | | | | | | | | | | | | | | | | This adds the missing state parameter to the call down to the RPM. This is currently hard coded to the active state, as that's all we're supporting at this moment. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * mfd: qcom-rpm: Driver for the Qualcomm RPMBjorn Andersson2015-01-223-0/+596
| | | | | | | | | | | | | | | | | | | | Driver for the Resource Power Manager (RPM) found in Qualcomm 8660, 8960 and 8064 based devices. The driver exposes resources that child drivers can operate on; to implementing regulator, clock and bus frequency drivers. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
| * mfd: max77686/802: Remove support for board filesKrzysztof Kozlowski2015-01-222-23/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The driver is used only on Exynos based boards with DTS support. After removal of board file support from max77686 and max77802 regulator drivers, the MFD driver can be converted to DTS-only version. This simplifies a little the code: 1. No dead (unused) entries in platform_data structure. 2. More code removed. 3. Regulator driver does not depend on allocated memory from MFD driver. 4. It makes also easier extending the regulator driver. Add to the max77686 MFD driver dependency on CONFIG_OF because without DTS the regulator drivers (max77686 and max77802) won't bind. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 17:31:54 +0100