summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* drivers: net: add missing interrupt.h includeFlorian Westphal2017-07-184-1/+4
| | | | | | | | | these drivers use tasklets or irq apis, but don't include interrupt.h. Once flow cache is removed the implicit interrupt.h inclusion goes away which will break the build. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: add a multi_chip info flagVivien Didelot2017-07-182-79/+33
| | | | | | | | | | | | | Instead of relying on a bitmap flag, add a new multi_chip info flag to describe the presence of the indirect SMI access though the two device registers 0x0 and 0x1. All remaining capabilities and flags are now unused. Remove the mv88e6xxx_cap enum and the info flags bitmaps. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: add Energy Detect opsVivien Didelot2017-07-186-47/+202
| | | | | | | | | | | | | | The 88E6352 family supports Energy Detect and has one bit for Sense and one bit for periodically transmit NLP (Energy Detect+TM). The 88E6390 family adds another bit to distinguish Auto or SW wake-up. Chips supporting EEE all have an EEE Enabled bit in the Port Status Register. This patch adds new ops for the PHY Energy Detect accesses. This also allows us to get rid of the MV88E6XXX_FLAG_EEE flag. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: add a global2_addr info flagVivien Didelot2017-07-184-29/+38
| | | | | | | | | | | Similarly to global1_addr, add a global2_addr member in the info structure to describe the presence of the Global 2 Registers. This allows us to get rid of the MV88E6XXX_FLAG_GLOBAL2 flag. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: add POT operationVivien Didelot2017-07-184-17/+45
| | | | | | | | | | | Add a pot_clear operation to clear the Priority Override Table and wrap its call into a mv88e6xxx_pot_setup helper. This allows us to get rid of the MV88E6XXX_FLAG_G2_POT flag. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: add POT flag to 88E6390Vivien Didelot2017-07-181-0/+1
| | | | | | | | | The 88E6390 family clear the Priority Override Table the same way as 88E6352, thus add MV88E6XXX_FLAG_G2_POT to MV88E6XXX_FLAGS_FAMILY_6390. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: distinguish Global 2 Rsvd2CPUVivien Didelot2017-07-184-61/+85
| | | | | | | | | | | | | | | | | The 88E6185 family only has one 16-bit register to mark the 16 802.1D reserved multicast addresses in the range of 01:80:C2:00:00:0x as MGMT. The 88E6352 family also has one 16-bit register to mark the 16 GARP reserved multicast addresses in the range of 01:80:C2:00:00:2x as MGMT. Split the existing mv88e6095 prefixed mgmt_rsvd2cpu operation into two distinct mv88e6185 and mv88e6352 prefixed operations, and wrap its call into a mv88e6xxx_rsvd2cpu_setup helper. This allows us to also get rid of the MV88E6XXX_CAP_G2_MGMT_EN_* flags. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: add number of Global 2 IRQsVivien Didelot2017-07-184-15/+62
| | | | | | | | | | | | | | | Similarly to g1_irqs, add a g2_irqs member to the info structure to indicates the presence of the Global 2 Interrupt Source and Mask registers. At the same time, provide helpers and document the registers since they differ a bit between 88E6352 and 88E6390 families. This allows us to get rid of the MV88E6XXX_FLAG_G2_INT flag. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: remove 88E6185 G2 interruptVivien Didelot2017-07-181-1/+0
| | | | | | | | | The 88E6185 family has no Global 2 Interrupt Source or Mask registers. Remove the MV88E6XXX_FLAG_G2_INT from MV88E6XXX_FLAGS_FAMILY_6185. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: remove unused capabilitiesVivien Didelot2017-07-181-26/+3
| | | | | | | | | Remove the forgotten capabilities and related flags from previous cleanups. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: fix 88E6321 family commentVivien Didelot2017-07-181-1/+1
| | | | | | | | | MV88E6XXX_FAMILY_6321 is undefined, 88E6321's family is 88E6320, fix this. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: remove LED control registerVivien Didelot2017-07-181-3/+0
| | | | | | | | We don't support LED control yet, remove its register definition. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: dsa: mv88e6xxx: remove unneeded dsa headerVivien Didelot2017-07-181-1/+0
| | | | | | | | phy.c does not need to include the DSA public header. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* mdio_bus: Remove unneeded gpiod NULL checkFabio Estevam2017-07-181-4/+2
| | | | | | | | | The gpiod API checks for NULL descriptors, so there is no need to duplicate the check in the driver. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ec_bhf: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 5113 384 0 5497 1579 drivers/net/ethernet/ec_bhf.o File size After adding 'const': text data bss dec hex filename 5177 320 0 5497 1579 drivers/net/ethernet/ec_bhf.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: cadence: macb: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 791 336 0 1127 467 net/ethernet/cadence/macb_pci.o File size After adding 'const': text data bss dec hex filename 855 272 0 1127 467 net/ethernet/cadence/macb_pci.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* virtio_net: Remove references to NETIF_F_UFO.David S. Miller2017-07-171-4/+2
| | | | | | It is going away. Signed-off-by: David S. Miller <davem@davemloft.net>
* dummy: Remove references to NETIF_F_UFO.David S. Miller2017-07-171-1/+1
| | | | | | It is going away. Signed-off-by: David S. Miller <davem@davemloft.net>
* tun/tap: Remove references to NETIF_F_UFO.David S. Miller2017-07-172-11/+3
| | | | | | It is going away. Signed-off-by: David S. Miller <davem@davemloft.net>
* macvlan/macvtap: Remove NETIF_F_UFO advertisement.David S. Miller2017-07-172-2/+2
| | | | | | It is going away. Signed-off-by: David S. Miller <davem@davemloft.net>
* ipvlan: Stop advertising NETIF_F_UFO support.David S. Miller2017-07-172-2/+2
| | | | | | It is going away. Signed-off-by: David S. Miller <davem@davemloft.net>
* macb: Remove bogus reference to NETIF_F_UFO.David S. Miller2017-07-171-1/+1
| | | | | | | This driver doesn't actually support UFO explicitly yet it advertises this in netdev->features. Signed-off-by: David S. Miller <davem@davemloft.net>
* s2io: Remove UFO support.David S. Miller2017-07-171-45/+0
| | | | Signed-off-by: David S. Miller <davem@davemloft.net>
* xdp: Add batching support to redirect mapJohn Fastabend2017-07-171-3/+25
| | | | | | | | | | | | | | For performance reasons we want to avoid updating the tail pointer in the driver tx ring as much as possible. To accomplish this we add batching support to the redirect path in XDP. This adds another ndo op "xdp_flush" that is used to inform the driver that it should bump the tail pointer on the TX ring. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* xdp: add trace event for xdp redirectJohn Fastabend2017-07-171-1/+1
| | | | | | | | | | This adds a trace event for xdp redirect which may help when debugging XDP programs that use redirect bpf commands. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: add initial support for xdp redirectJohn Fastabend2017-07-171-1/+40
| | | | | | | | | | There are optimizations we can add after the basic feature is enabled. But, for now keep the patch simple. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* ixgbe: NULL xdp_tx rings on resource cleanupJohn Fastabend2017-07-171-2/+6
| | | | | | | | | | | tx_rings and rx_rings are cleaned up on close paths in ixgbe driver however, xdp_rings are not. Set the xdp_rings to NULL here so that we can use the pointer to indicate if the XDP rings are initialized. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Improve IPv6 unregistered multicast floodingArkadi Sharshevsky2017-07-171-1/+1
| | | | | | | | | | | | | | | | Up until now IPv6 unregistered multicast traffic would be flooded like broadcast, even when MLD snooping was enabled on the bridge. This was intentional as MLD packet traps were missing, preventing the bridge driver from programming MDB entries to the device. Previous patch added these traps, so we can now finally flood IPv6 unregistered multicast packets to specific ports via the multicast table instead of flooding them to all ports via the broadcast table. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Add support for IPv6 MLDv1/2 trapsArkadi Sharshevsky2017-07-173-0/+15
| | | | | | | | | Add support for IPv6 MLDv1/2 packet trapping. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Trap IPv4 packets with Router Alert optionIdo Schimmel2017-07-172-0/+2
| | | | | | | | | | | | In case local sockets have the IP_ROUTER_ALERT socket option set, then they expect to get packets with the Router Alert option. Trap such packets, so that the kernel could inspect them and potentially send them to interested sockets. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Mark packets trapped in routerIdo Schimmel2017-07-171-7/+7
| | | | | | | | | | | | | | | | In commit 1c6c6d221e2b ("mlxsw: spectrum: Mirror certain packets to CPU") we marked packets that were mirrored to the CPU, so that they won't be flooded again by the bridge driver. However, certain packets are trapped in the device's router block, after passing through the bridge block where they were potentially flooded. Mark all packets coming from L3 traps, so that they won't be potentially flooded again by the bridge driver. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum_flower: Add support for ip tosOr Gerlitz2017-07-171-0/+7
| | | | | | | | Support offloading rules that match on ip tos. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Add tos to the ipv4 acl blockOr Gerlitz2017-07-172-0/+4
| | | | | | | | Add ecn and dscp fields to the ipv4 acl block. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: acl: Add ip tos acl elementOr Gerlitz2017-07-171-0/+4
| | | | | | | | Define new element for ip tos (ecn, dscp) and place it into scratch area. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum_flower: Add support for ip ttlOr Gerlitz2017-07-171-2/+35
| | | | | | | | Support offloading rules that match on ip ttl. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: spectrum: Add ttl to the ipv4 acl blockOr Gerlitz2017-07-172-0/+2
| | | | | | | | Add ttl field to the ipv4 acl block. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* mlxsw: acl: Add ip ttl acl elementOr Gerlitz2017-07-171-0/+2
| | | | | | | | Define new element for ip ttl and place it into scratch area. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: axienet: add support for standard phy-mode bindingAlvaro G. M2017-07-172-14/+38
| | | | | | | | | Keep supporting proprietary "xlnx,phy-type" attribute and add support for MII connectivity to the PHY. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: idt77252: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 27702 468 16 28186 6e1a drivers/atm/idt77252.o File size After adding 'const': text data bss dec hex filename 27766 404 16 28186 6e1a drivers/atm/idt77252.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: eni: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 21565 352 56 21973 55d5 drivers/atm/eni.o File size After adding 'const': text data bss dec hex filename 21661 256 56 21973 55d5 drivers/atm/eni.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: firestream: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 16884 444 28 17356 43cc drivers/atm/firestream.o File size After adding 'const': text data bss dec hex filename 16980 348 28 17356 43cc drivers/atm/firestream.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: zatm: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 14350 352 40 14742 3996 drivers/atm/zatm.o File size After adding 'const': text data bss dec hex filename 14446 256 40 14742 3996 drivers/atm/zatm.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: lanai: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 18074 352 0 18426 47fa drivers/atm/lanai.o File size After adding 'const': text data bss dec hex filename 18170 256 0 18426 47fa drivers/atm/lanai.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: solos-pci: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 16138 4592 24 20754 5112 drivers/atm/solos-pci.o File size After adding 'const': text data bss dec hex filename 16218 4528 24 20754 5122 drivers/atm/solos-pci.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: horizon: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 9859 328 6 10193 27d1 drivers/atm/horizon.o File size After adding 'const': text data bss dec hex filename 9923 264 6 10193 27d1 drivers/atm/horizon.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: he: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 26514 440 48 27002 697a drivers/atm/he.o File size After adding 'const': text data bss dec hex filename 26578 376 48 27002 697a drivers/atm/he.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: nicstar: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 22781 464 128 23373 5b4d drivers/atm/nicstar.o File size After adding 'const': text data bss dec hex filename 22845 400 128 23373 5b4d drivers/atm/nicstar.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: fore200e: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 20025 320 16 20361 4f89 drivers/atm/fore200e.o File size After adding 'const': text data bss dec hex filename 20089 256 16 20361 4f89 drivers/atm/fore200e.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: ambassador: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 13372 408 4 13784 35d8 drivers/atm/ambassador.o File size After adding 'const': text data bss dec hex filename 13484 296 4 13784 35d8 drivers/atm/ambassador.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* atm: iphase: constify pci_device_id.Arvind Yadav2017-07-171-1/+1
| | | | | | | | | | | | | | | | | pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 23536 432 160 24128 5e40 drivers/atm/iphase.o File size After adding 'const': text data bss dec hex filename 23632 336 160 24128 5e40 drivers/atm/iphase.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 17:35:26 +0100