summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* usb: dwc3: pci: Enable ULPI Refclk on platforms where the firmware does notHans de Goede2018-07-261-0/+31
| | | | | | | | | | | On some Bay Trail (BYT) systems the firmware does not enable the ULPI Refclk. This commit adds a helper which checks and if necessary enabled the Refclk and calls this helper for BYT machines. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc3: pci: Add GPIO lookup table on platforms without ACPI GPIO resourcesHans de Goede2018-07-261-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bay Trail / BYT SoCs do not have a builtin device-mode phy, instead they require an external ULPI phy for device-mode. Only some BYT devices have an external phy, but even on those devices device-mode is not working because the dwc3 does not see the phy. The problem is that the ACPI fwnode for the dwc3 does not contain the expected GPIO resources for the GPIOs connected to the chip-select and reset pins of the phy. I've found the workaround which some Android x86 kernels use for this: https://github.com/BORETS24/Kernel-for-Asus-Zenfone-2/blob/master/arch/x86/platform/intel-mid/device_libs/pci/platform_usb_otg.c Which boils down to hardcoding the GPIOs for these devices. The good news it that all boards (*) use the same GPIOs. This commit fixes the ULPI phy not woring by adding a gpiod_lookup_table call which adds a hardcoded mapping for BYT devices. Note that the mapping added by gpiod_add_lookup_table is a fallback mapping, so boards which properly provide GPIO resources in the ACPI firmware-node resources will not use this. *) Except for the first revision of the evalulation-kit, which normal users don't have Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: usbtest: use irqsave() in USB's complete callbackSebastian Andrzej Siewior2018-07-261-4/+6
| | | | | | | | | | | | | | | The USB completion callback does not disable interrupts while acquiring the lock. We want to remove the local_irq_disable() invocation from __usb_hcd_giveback_urb() and therefore it is required for the callback handler to disable the interrupts while acquiring the lock. The callback may be invoked either in IRQ or BH context depending on the USB host controller. Use the _irqsave() variant of the locking primitives. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* USB: gadget: Document that certain ep operations can be called in interrupt ↵Alan Stern2018-07-261-0/+18
| | | | | | | | | | | | | | | | | | context This documentation patch specifies that certain USB gadget endpoint operations may be called in interrupt context: usb_ep_queue, usb_ep_dequeue, usb_ep_set_halt, usb_ep_clear_halt, usb_ep_set_wedge, usb_ep_fifo_status, and usb_ep_fifo_flush; while others must be called in process context: usb_ep_enable and usb_ep_disable. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: configfs: avoid spaces for indentationParth Y Shah2018-07-261-2/+2
| | | | | | | | | | | This fixes the following checkpatch error: ERROR: code indent should use tabs where possible Here, spaces are replaced by a tab in 2 lines. Signed-off-by: Parth Y Shah <sparth1292@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc3: Add a glue driver for Synopsys HAPS platformThinh Nguyen2018-07-264-34/+147
| | | | | | | | This driver is to be used for Synopsys PCIe-base HAPS platform. Move the the HAPS support from dwc3-pci to this driver. Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: f_fs: Only return delayed status when len is 0Jerry Zhang2018-07-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1b9ba000 ("Allow function drivers to pause control transfers") states that USB_GADGET_DELAYED_STATUS is only supported if data phase is 0 bytes. It seems that when the length is not 0 bytes, there is no need to explicitly delay the data stage since the transfer is not completed until the user responds. However, when the length is 0, there is no data stage and the transfer is finished once setup() returns, hence there is a need to explicitly delay completion. This manifests as the following bugs: Prior to 946ef68ad4e4 ('Let setup() return USB_GADGET_DELAYED_STATUS'), when setup is 0 bytes, ffs would require user to queue a 0 byte request in order to clear setup state. However, that 0 byte request was actually not needed and would hang and cause errors in other setup requests. After the above commit, 0 byte setups work since the gadget now accepts empty queues to ep0 to clear the delay, but all other setups hang. Fixes: 946ef68ad4e4 ("Let setup() return USB_GADGET_DELAYED_STATUS") Signed-off-by: Jerry Zhang <zhangjerry@google.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: uvc: Expose configuration name through video nodeKieran Bingham2018-07-261-1/+23
| | | | | | | | | | | | | When utilising multiple instantiations of a UVC gadget on a composite device, there is no clear method to link a particular configuration to its respective video node. Provide a means for identifying the correct video node by exposing the name of the function configuration through sysfs. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: uvc: configfs: Move function to avoid forward declarationLaurent Pinchart2018-07-261-7/+5
| | | | | | | | The to_f_uvc_opts() function is forward-declared without needing to, as its definition can simply be moved up in the file. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: dwc2: Move dwc2_readl/writel functions after hsotg structureGevorg Sahakyan2018-07-261-54/+54
| | | | | | | | | Moved dwc2_readl/writel functions after hsotg declaration for adding hsotg structure to dwc2_readl/writel function prototypes. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: tcm: fix spelling mistake: "Manufactor" -> "Manufacturer"Colin Ian King2018-07-261-1/+1
| | | | | | | Trivial fix to spelling mistake in usbg_us_strings array Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: uvc: Move trace parameter to function moduleLaurent Pinchart2018-07-263-8/+2
| | | | | | | | | | The trace module parameter controls output of debugging messages in the UVC function driver. Move it from the webcam module to the UVC function module where it belongs. This allows ConfigFS-based UVC gadgets to control tracing. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: uvc: Minimize #include in headersLaurent Pinchart2018-07-267-18/+25
| | | | | | | | | | | | | In order to speed up compilation, only include the headers that are strictly required within other headers. To that end, use forward structure declaration and move #include statements to .c file as appropriate. While at it, sort headers alphabetically, and remove unneeded __KERNEL__ guards. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* usb: gadget: uvc: Move userspace API definition to public headerLaurent Pinchart2018-07-261-40/+5
| | | | | | | | | | | | The UVC gadget userspace API (V4L2 events and custom ioctls) is defined in a header internal to the kernel. Move it to a new public header to make it accessible to userspace. The UVC_INTF_CONTROL and UVC_INTF_STREAMING macros are not used, so remove them in the process. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
* Merge tag 'nvme-for-4.18' of git://git.infradead.org/nvmeLinus Torvalds2018-07-222-34/+41
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull NVMe fixes from Christoph Hellwig: - fix a regression in 4.18 that causes a memory leak on probe failure (Keith Bush) - fix a deadlock in the passthrough ioctl code (Scott Bauer) - don't enable AENs if not supported (Weiping Zhang) - fix an old regression in metadata handling in the passthrough ioctl code (Roland Dreier) * tag 'nvme-for-4.18' of git://git.infradead.org/nvme: nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD nvme: don't enable AEN if not supported nvme: ensure forward progress during Admin passthru nvme-pci: fix memory leak on probe failure
| * nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMDRoland Dreier2018-07-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | The old code in nvme_user_cmd() passed the userspace virtual address from nvme_passthru_cmd.metadata as the length of the metadata buffer as well as the address to nvme_submit_user_cmd(). Fixes: 63263d60 ("nvme: Use metadata for passthrough commands") Signed-off-by: Roland Dreier <roland@purestorage.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * nvme: don't enable AEN if not supportedWeiping Zhang2018-07-171-4/+7
| | | | | | | | | | | | | | | | | | | | Avoid excuting set_feature command if there is no supported bit in Optional Asynchronous Events Supported (OAES). Fixes: c0561f82 ("nvme: submit AEN event configuration on startup") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Weiping Zhang <zhangweiping@didichuxing.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * nvme: ensure forward progress during Admin passthruScott Bauer2018-07-171-24/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the controller supports effects and goes down during the passthru admin command we will deadlock during namespace revalidation. [ 363.488275] INFO: task kworker/u16:5:231 blocked for more than 120 seconds. [ 363.488290] Not tainted 4.17.0+ #2 [ 363.488296] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 363.488303] kworker/u16:5 D 0 231 2 0x80000000 [ 363.488331] Workqueue: nvme-reset-wq nvme_reset_work [nvme] [ 363.488338] Call Trace: [ 363.488385] schedule+0x75/0x190 [ 363.488396] rwsem_down_read_failed+0x1c3/0x2f0 [ 363.488481] call_rwsem_down_read_failed+0x14/0x30 [ 363.488504] down_read+0x1d/0x80 [ 363.488523] nvme_stop_queues+0x1e/0xa0 [nvme_core] [ 363.488536] nvme_dev_disable+0xae4/0x1620 [nvme] [ 363.488614] nvme_reset_work+0xd1e/0x49d9 [nvme] [ 363.488911] process_one_work+0x81a/0x1400 [ 363.488934] worker_thread+0x87/0xe80 [ 363.488955] kthread+0x2db/0x390 [ 363.488977] ret_from_fork+0x35/0x40 Fixes: 84fef62d135b6 ("nvme: check admin passthru command effects") Signed-off-by: Scott Bauer <scott.bauer@intel.com> Reviewed-by: Keith Busch <keith.busch@linux.intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
| * nvme-pci: fix memory leak on probe failureKeith Busch2018-07-121-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The nvme driver specific structures need to be initialized prior to enabling the generic controller so we can unwind on failure with out using the reference counting callbacks so that 'probe' and 'remove' can be symmetric. The newly added iod_mempool is the only resource that was being allocated out of order, and a failure there would leak the generic controller memory. This patch just moves that allocation above the controller initialization. Fixes: 943e942e6266f ("nvme-pci: limit max IO size and segments to avoid high order allocations") Reported-by: Weiping Zhang <zwp10758@gmail.com> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* | Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds2018-07-223-22/+7
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull vfs fixes from Al Viro: "Fix several places that screw up cleanups after failures halfway through opening a file (one open-coding filp_clone_open() and getting it wrong, two misusing alloc_file()). That part is -stable fodder from the 'work.open' branch. And Christoph's regression fix for uapi breakage in aio series; include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel definition of sigset_t, the reason for doing so in the first place had been bogus - there's no need to expose struct __aio_sigset in aio_abi.h at all" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: don't expose __aio_sigset in uapi ocxlflash_getfile(): fix double-iput() on alloc_file() failures cxl_getfile(): fix double-iput() on alloc_file() failures drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()
| * | ocxlflash_getfile(): fix double-iput() on alloc_file() failuresAl Viro2018-07-111-3/+2
| | | | | | | | | | | | | | | | | | Cc: stable@vger.kernel.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | cxl_getfile(): fix double-iput() on alloc_file() failuresAl Viro2018-07-111-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Doing iput() after path_put() is wrong. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
| * | drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()Al Viro2018-07-111-15/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Failure of ->open() should *not* be followed by fput(). Fixed by using filp_clone_open(), which gets the cleanups right. Cc: stable@vger.kernel.org Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* | | Merge tag 'armsoc-fixes' of ↵Linus Torvalds2018-07-221-0/+21
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: - Fix interrupt type on ethernet switch for i.MX-based RDU2 - GPC on i.MX exposed too large a register window which resulted in userspace being able to crash the machine. - Fixup of bad merge resolution moving GPIO DT nodes under pinctrl on droid4. * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch soc: imx: gpc: restrict register range for regmap access ARM: dts: omap4-droid4: fix dts w.r.t. pwm
| * \ \ Merge tag 'imx-fixes-4.18-3' of ↵Olof Johansson2018-07-201-0/+21
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.18, round 3: - Restrict GPC driver on register range that is accessible by regmap, so that we can avoid user space from triggering imprecise external abort exception. * tag 'imx-fixes-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: restrict register range for regmap access Signed-off-by: Olof Johansson <olof@lixom.net>
| | * | | soc: imx: gpc: restrict register range for regmap accessAnson Huang2018-07-191-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPC registers are NOT continuous, some registers are reserved and accessing them from userspace will trigger external abort, add regmap register access table to avoid below abort: root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers [ 108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004 [ 108.487985] pgd = 42b54bfd [ 108.490741] [b6db5004] *pgd=ba1b7831 [ 108.494386] Internal error: : 1406 [#1] SMP ARM [ 108.498943] Modules linked in: [ 108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482 [ 108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 108.516123] PC is at regmap_mmio_read32le+0x20/0x24 [ 108.521031] LR is at regmap_mmio_read+0x40/0x60 [ 108.525586] pc : [<c059cf74>] lr : [<c059d1ac>] psr: 20060093 [ 108.531875] sp : eccf1d98 ip : eccf1da8 fp : eccf1da4 [ 108.537122] r10: ec2d3800 r9 : eccf1f60 r8 : ecfc0000 [ 108.542370] r7 : eccf1e2c r6 : eccf1e2c r5 : 00000028 r4 : ec338e00 [ 108.548920] r3 : 00000000 r2 : eccf1e2c r1 : f0980028 r0 : 00000000 [ 108.555474] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 108.562720] Control: 10c5387d Table: acf4004a DAC: 00000051 [ 108.568491] Process cat (pid: 389, stack limit = 0xd4318a65) [ 108.574174] Stack: (0xeccf1d98 to 0xeccf2000) Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* | | | | Merge tag 'powerpc-4.18-4' of ↵Linus Torvalds2018-07-221-5/+5
|\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Two regression fixes, one for xmon disassembly formatting and the other to fix the E500 build. Two commits to fix a potential security issue in the VFIO code under obscure circumstances. And finally a fix to the Power9 idle code to restore SPRG3, which is user visible and used for sched_getcpu(). Thanks to: Alexey Kardashevskiy, David Gibson. Gautham R. Shenoy, James Clarke" * tag 'powerpc-4.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: Fix save/restore of SPRG3 on entry/exit from stop (idle) powerpc/Makefile: Assemble with -me500 when building for E500 KVM: PPC: Check if IOMMU page is contained in the pinned physical page vfio/spapr: Use IOMMU pageshift rather than pagesize powerpc/xmon: Fix disassembly since printf changes
| * | | | | KVM: PPC: Check if IOMMU page is contained in the pinned physical pageAlexey Kardashevskiy2018-07-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A VM which has: - a DMA capable device passed through to it (eg. network card); - running a malicious kernel that ignores H_PUT_TCE failure; - capability of using IOMMU pages bigger that physical pages can create an IOMMU mapping that exposes (for example) 16MB of the host physical memory to the device when only 64K was allocated to the VM. The remaining 16MB - 64K will be some other content of host memory, possibly including pages of the VM, but also pages of host kernel memory, host programs or other VMs. The attacking VM does not control the location of the page it can map, and is only allowed to map as many pages as it has pages of RAM. We already have a check in drivers/vfio/vfio_iommu_spapr_tce.c that an IOMMU page is contained in the physical page so the PCI hardware won't get access to unassigned host memory; however this check is missing in the KVM fastpath (H_PUT_TCE accelerated code). We were lucky so far and did not hit this yet as the very first time when the mapping happens we do not have tbl::it_userspace allocated yet and fall back to the userspace which in turn calls VFIO IOMMU driver, this fails and the guest does not retry, This stores the smallest preregistered page size in the preregistered region descriptor and changes the mm_iommu_xxx API to check this against the IOMMU page size. This calculates maximum page size as a minimum of the natural region alignment and compound page size. For the page shift this uses the shift returned by find_linux_pte() which indicates how the page is mapped to the current userspace - if the page is huge and this is not a zero, then it is a leaf pte and the page is mapped within the range. Fixes: 121f80ba68f1 ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
| * | | | | vfio/spapr: Use IOMMU pageshift rather than pagesizeAlexey Kardashevskiy2018-07-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The size is always equal to 1 page so let's use this. Later on this will be used for other checks which use page shifts to check the granularity of access. This should cause no behavioral change. Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
* | | | | | Merge tag 'vfio-v4.18-rc6' of git://github.com/awilliam/linux-vfioLinus Torvalds2018-07-201-0/+4
|\ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull VFIO fix from Alex Williamson: "Harden potential Spectre v1 issue (Gustavo A. R. Silva)" * tag 'vfio-v4.18-rc6' of git://github.com/awilliam/linux-vfio: vfio/pci: Fix potential Spectre v1
| * | | | | | vfio/pci: Fix potential Spectre v1Gustavo A. R. Silva2018-07-181-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | info.index can be indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/vfio/pci/vfio_pci.c:734 vfio_pci_ioctl() warn: potential spectre issue 'vdev->region' Fix this by sanitizing info.index before indirectly using it to index vdev->region Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2 Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
* | | | | | | Merge tag 'for-4.18/dm-fixes-2' of ↵Linus Torvalds2018-07-201-14/+29
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mike Snitzer: "Fix DM writecache target to allow an optional offset to the start of the data and metadata area. This allows userspace tools (e.g. LVM2) to place a header and metadata at the front of the writecache device for its use" * tag 'for-4.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm writecache: support optional offset for start of device
| * | | | | | | dm writecache: support optional offset for start of deviceMikulas Patocka2018-07-021-14/+29
| | |/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an optional parameter "start_sector" to allow the start of the device to be offset by the specified number of 512-byte sectors. The sectors below this offset are not used by the writecache device and are left to be used for disk labels and/or userspace metadata (e.g. lvm). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
* | | | | | | Merge tag 'scsi-fixes' of ↵Linus Torvalds2018-07-2010-30/+88
|\ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A set of 8 obvious fixes. Three (2 qla2xxx and the cxlflash oopses) are regressions, two from 4.17 and one from the merge window. The hpsa change is user visible, but it fixes an error users have complained about" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: cxlflash: fix assignment of the backend operations scsi: qedi: Send driver state to MFW scsi: qedf: Send the driver state to MFW scsi: hpsa: correct enclosure sas address scsi: sd_zbc: Fix variable type and bogus comment scsi: qla2xxx: Fix NULL pointer dereference for fcport search scsi: qla2xxx: Fix kernel crash due to late workqueue allocation scsi: qla2xxx: Fix inconsistent DMA mem alloc/free
| * | | | | | | scsi: cxlflash: fix assignment of the backend operationsCédric Le Goater2018-07-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit cd43c221bb5e ("scsi: cxlflash: Isolate external module dependencies") introduced the use of ifdefs to avoid compilation errors when one of the possible backend driver, CXL or OCXL, is not compiled. Unfortunately, the wrong defines are used and the backend ops are never assigned, leading to a kernel crash in any case when the cxlflash module is loaded. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | | scsi: qedi: Send driver state to MFWManish Rangankar2018-07-111-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of iSCSI offload BFS environment, MFW requires to mark virtual link based upon qedi load status. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | | scsi: qedf: Send the driver state to MFWSaurav Kashyap2018-07-111-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Need to notify firmware when driver is loaded and unloaded. Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com> Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | | scsi: hpsa: correct enclosure sas addressDon Brace2018-07-112-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original complaint was the lsscsi -t showed the same SAS address of the two enclosures (SEP devices). In fact the SAS address was being set to the Enclosure Logical Identifier (ELI). Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | | scsi: sd_zbc: Fix variable type and bogus commentDamien Le Moal2018-07-111-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the description of sd_zbc_check_zone_size() to correctly explain that the returned value is a number of device blocks, not bytes. Additionally, the 32 bits "ret" variable used in this function may truncate the 64 bits zone_blocks variable value upon return. To fix this, change "ret" type to s64. Fixes: ccce20fc79 ("sd_zbc: Avoid that resetting a zone fails sporadically") Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Bart Van Assche <bart.vanassche@wdc.com> Cc: stable@kernel.org Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | | scsi: qla2xxx: Fix NULL pointer dereference for fcport searchChuck Anderson2018-07-111-6/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Crash dump shows following instructions crash> bt PID: 0 TASK: ffffffffbe412480 CPU: 0 COMMAND: "swapper/0" #0 [ffff891ee0003868] machine_kexec at ffffffffbd063ef1 #1 [ffff891ee00038c8] __crash_kexec at ffffffffbd12b6f2 #2 [ffff891ee0003998] crash_kexec at ffffffffbd12c84c #3 [ffff891ee00039b8] oops_end at ffffffffbd030f0a #4 [ffff891ee00039e0] no_context at ffffffffbd074643 #5 [ffff891ee0003a40] __bad_area_nosemaphore at ffffffffbd07496e #6 [ffff891ee0003a90] bad_area_nosemaphore at ffffffffbd074a64 #7 [ffff891ee0003aa0] __do_page_fault at ffffffffbd074b0a #8 [ffff891ee0003b18] do_page_fault at ffffffffbd074fc8 #9 [ffff891ee0003b50] page_fault at ffffffffbda01925 [exception RIP: qlt_schedule_sess_for_deletion+15] RIP: ffffffffc02e526f RSP: ffff891ee0003c08 RFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffc0307847 RDX: 00000000000020e6 RSI: ffff891edbc377c8 RDI: 0000000000000000 RBP: ffff891ee0003c18 R8: ffffffffc02f0b20 R9: 0000000000000250 R10: 0000000000000258 R11: 000000000000b780 R12: ffff891ed9b43000 R13: 00000000000000f0 R14: 0000000000000006 R15: ffff891edbc377c8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #10 [ffff891ee0003c20] qla2x00_fcport_event_handler at ffffffffc02853d3 [qla2xxx] #11 [ffff891ee0003cf0] __dta_qla24xx_async_gnl_sp_done_333 at ffffffffc0285a1d [qla2xxx] #12 [ffff891ee0003de8] qla24xx_process_response_queue at ffffffffc02a2eb5 [qla2xxx] #13 [ffff891ee0003e88] qla24xx_msix_rsp_q at ffffffffc02a5403 [qla2xxx] #14 [ffff891ee0003ec0] __handle_irq_event_percpu at ffffffffbd0f4c59 #15 [ffff891ee0003f10] handle_irq_event_percpu at ffffffffbd0f4e02 #16 [ffff891ee0003f40] handle_irq_event at ffffffffbd0f4e90 #17 [ffff891ee0003f68] handle_edge_irq at ffffffffbd0f8984 #18 [ffff891ee0003f88] handle_irq at ffffffffbd0305d5 #19 [ffff891ee0003fb8] do_IRQ at ffffffffbda02a18 --- <IRQ stack> --- #20 [ffffffffbe403d30] ret_from_intr at ffffffffbda0094e [exception RIP: unknown or invalid address] RIP: 000000000000001f RSP: 0000000000000000 RFLAGS: fff3b8c2091ebb3f RAX: ffffbba5a0000200 RBX: 0000be8cdfa8f9fa RCX: 0000000000000018 RDX: 0000000000000101 RSI: 000000000000015d RDI: 0000000000000193 RBP: 0000000000000083 R8: ffffffffbe403e38 R9: 0000000000000002 R10: 0000000000000000 R11: ffffffffbe56b820 R12: ffff891ee001cf00 R13: ffffffffbd11c0a4 R14: ffffffffbe403d60 R15: 0000000000000001 ORIG_RAX: ffff891ee0022ac0 CS: 0000 SS: ffffffffffffffb9 bt: WARNING: possibly bogus exception frame #21 [ffffffffbe403dd8] cpuidle_enter_state at ffffffffbd67c6fd #22 [ffffffffbe403e40] cpuidle_enter at ffffffffbd67c907 #23 [ffffffffbe403e50] call_cpuidle at ffffffffbd0d98f3 #24 [ffffffffbe403e60] do_idle at ffffffffbd0d9b42 #25 [ffffffffbe403e98] cpu_startup_entry at ffffffffbd0d9da3 #26 [ffffffffbe403ec0] rest_init at ffffffffbd81d4aa #27 [ffffffffbe403ed0] start_kernel at ffffffffbe67d2ca #28 [ffffffffbe403f28] x86_64_start_reservations at ffffffffbe67c675 #29 [ffffffffbe403f38] x86_64_start_kernel at ffffffffbe67c6eb #30 [ffffffffbe403f50] secondary_startup_64 at ffffffffbd0000d5 Fixes: 040036bb0bc1 ("scsi: qla2xxx: Delay loop id allocation at login") Cc: <stable@vger.kernel.org> # v4.17+ Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | | scsi: qla2xxx: Fix kernel crash due to late workqueue allocationhimanshu.madhani@cavium.com2018-07-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes crash for FCoE adapter. Once driver initialization is complete, firmware will start posting Asynchronous Event, However driver has not yet allocated workqueue to process and queue up work. This delay of allocating workqueue results into NULL pointer access. The following stack trace is seen: [ 24.577259] BUG: unable to handle kernel NULL pointer dereference at 0000000000000102 [ 24.623133] PGD 0 P4D 0 [ 24.636760] Oops: 0000 [#1] SMP NOPTI [ 24.656942] Modules linked in: i2c_algo_bit drm_kms_helper sr_mod(+) syscopyarea sysfillrect sysimgblt cdrom fb_sys_fops ata_generic ttm pata_acpi sd_mod ahci pata_atiixp sfc(+) qla2xxx(+) libahci drm qla4xxx(+) nvme_fc hpsa mdio libiscsi qlcnic(+) nvme_fabrics scsi_transport_sas serio_raw mtd crc32c_intel libata nvme_core i2c_core scsi_transport_iscsi tg3 scsi_transport_fc bnx2 iscsi_boot_sysfs dm_multipath dm_mirror dm_region_hash dm_log dm_mod [ 24.887449] CPU: 0 PID: 177 Comm: kworker/0:3 Not tainted 4.17.0-rc6 #1 [ 24.925119] Hardware name: HP ProLiant DL385 G7, BIOS A18 08/15/2012 [ 24.962106] Workqueue: events work_for_cpu_fn [ 24.987098] RIP: 0010:__queue_work+0x1f/0x3a0 [ 25.011672] RSP: 0018:ffff992642ceba10 EFLAGS: 00010082 [ 25.042116] RAX: 0000000000000082 RBX: 0000000000000082 RCX: 0000000000000000 [ 25.083293] RDX: ffff8cf9abc6d7d0 RSI: 0000000000000000 RDI: 0000000000002000 [ 25.123094] RBP: 0000000000000000 R08: 0000000000025a40 R09: ffff8cf9aade2880 [ 25.164087] R10: 0000000000000000 R11: ffff992642ceb6f0 R12: ffff8cf9abc6d7d0 [ 25.202280] R13: 0000000000002000 R14: ffff8cf9abc6d7b8 R15: 0000000000002000 [ 25.242050] FS: 0000000000000000(0000) f9b5c00000(0000) knlGS:0000000000000000 [ 25.977565] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 26.010457] CR2: 0000000000000102 CR3: 000000030760a000 CR4: 00000000000406f0 [ 26.051048] Call Trace: [ 26.063572] ? __switch_to_asm+0x34/0x70 [ 26.086079] queue_work_on+0x24/0x40 [ 26.107090] qla2x00_post_work+0x81/0xb0 [qla2xxx] [ 26.133356] qla2x00_async_event+0x1ad/0x1a20 [qla2xxx] [ 26.164075] ? lock_timer_base+0x67/0x80 [ 26.186420] ? try_to_del_timer_sync+0x4d/0x80 [ 26.212284] ? del_timer_sync+0x35/0x40 [ 26.234080] ? schedule_timeout+0x165/0x2f0 [ 26.259575] qla82xx_poll+0x13e/0x180 [qla2xxx] [ 26.285740] qla2x00_mailbox_command+0x74b/0xf50 [qla2xxx] [ 26.319040] qla82xx_set_driver_version+0x13b/0x1c0 [qla2xxx] [ 26.352108] ? qla2x00_init_rings+0x206/0x3f0 [qla2xxx] [ 26.381733] qla2x00_initialize_adapter+0x35c/0x7f0 [qla2xxx] [ 26.413240] qla2x00_probe_one+0x1479/0x2390 [qla2xxx] [ 26.442055] local_pci_probe+0x3f/0xa0 [ 26.463108] work_for_cpu_fn+0x10/0x20 [ 26.483295] process_one_work+0x152/0x350 [ 26.505730] worker_thread+0x1cf/0x3e0 [ 26.527090] kthread+0xf5/0x130 [ 26.545085] ? max_active_store+0x80/0x80 [ 26.568085] ? kthread_bind+0x10/0x10 [ 26.589533] ret_from_fork+0x22/0x40 [ 26.610192] Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 41 89 ff 41 56 41 55 41 89 fd 41 54 49 89 d4 55 48 89 f5 53 48 83 ec 0 86 02 01 00 00 01 0f 85 80 02 00 00 49 c7 c6 c0 ec 01 00 41 [ 27.308540] RIP: __queue_work+0x1f/0x3a0 RSP: ffff992642ceba10 [ 27.341591] CR2: 0000000000000102 [ 27.360208] ---[ end trace 01b7b7ae2c005cf3 ]--- Cc: <stable@vger.kernel.org> # v4.17+ Fixes: 9b3e0f4d4147 ("scsi: qla2xxx: Move work element processing out of DPC thread" Reported-by: Li Wang <liwang@redhat.com> Tested-by: Li Wang <liwang@redhat.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
| * | | | | | | scsi: qla2xxx: Fix inconsistent DMA mem alloc/freeQuinn Tran2018-07-112-14/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPNFT command allocates 2 buffer for switch query. On completion, the same buffers were freed using different size, instead of using original size at the time of allocation. This patch saves the size of the request and response buffers and uses that to free them. Following stack trace can be seen when using debug kernel dump_stack+0x19/0x1b __warn+0xd8/0x100 warn_slowpath_fmt+0x5f/0x80 check_unmap+0xfb/0xa20 debug_dma_free_coherent+0x110/0x160 qla24xx_sp_unmap+0x131/0x1e0 [qla2xxx] qla24xx_async_gnnft_done+0xb6/0x550 [qla2xxx] qla2x00_do_work+0x1ec/0x9f0 [qla2xxx] Cc: <stable@vger.kernel.org> # v4.17+ Fixes: 33b28357dd00 ("scsi: qla2xxx: Fix Async GPN_FT for FCP and FC-NVMe scan") Reported-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Quinn Tran <quinn.tran@cavium.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* | | | | | | | Merge tag 'iommu-fixes-v4.18-rc5' of ↵Linus Torvalds2018-07-201-2/+30
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "Only one revert, for an an Intel VT-d patch that caused issues with the i915 GPU driver" * tag 'iommu-fixes-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices"
| * | | | | | | | Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices"Lu Baolu2018-07-201-2/+30
| | |_|/ / / / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit ab96746aaa344fb720a198245a837e266fad3b62. The commit ab96746aaa34 ("iommu/vt-d: Clean up pasid quirk for pre-production devices") triggers ECS mode on some platforms which have broken ECS support. As the result, graphic device will be inoperable on boot. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107017 Cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
* | | | | | | | Merge tag 'platform-drivers-x86-v4.18-2' of ↵Linus Torvalds2018-07-201-1/+1
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver fixes from Andy Shevchenko: "The Dell laptop ACPI video brightness control is now back after fixing a regression brought by SMM refactoring" * tag 'platform-drivers-x86-v4.18-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: dell-laptop: Fix backlight detection
| * | | | | | | | platform/x86: dell-laptop: Fix backlight detectionDamien Thébault2018-07-201-1/+1
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix return code check for "max brightness" ACPI call. The Dell laptop ACPI video brightness control is not present on dell laptops anymore, but was present in older kernel versions. The code that checks the return value is incorrect since the SMM refactoring. The old code was: if (buffer->output[0] == 0) Which was changed to: ret = dell_send_request(...) if (ret) However, dell_send_request() will return 0 if buffer->output[0] == 0, so we must change the check to: if (ret == 0) This issue was found on a Dell M4800 laptop, and the fix tested on it as well. Fixes: 549b4930f057 ("dell-smbios: Introduce dispatcher for SMM calls") Signed-off-by: Damien Thébault <damien@dtbo.net> Tested-by: Damien Thébault <damien@dtbo.net> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* | | | | | | | Merge tag 'pm-4.18-rc6' of ↵Linus Torvalds2018-07-202-1/+20
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a relatively old initialization issue in intel_pstate causing the pcc-cpufreq driver to be used instead of it on some HP Proliant systems. This turned into a functional regression during the 4.17 cycle, because pcc-cpufreq is a scalability disaster and that was amplified by the idle loop rework done at that time (Rafael Wysocki). * tag 'pm-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Register when ACPI PCCH is present
| * | | | | | | | cpufreq: intel_pstate: Register when ACPI PCCH is presentRafael J. Wysocki2018-07-182-1/+20
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, intel_pstate doesn't register if _PSS is not present on HP Proliant systems, because it expects the firmware to take over CPU performance scaling in that case. However, if ACPI PCCH is present, the firmware expects the kernel to use it for CPU performance scaling and the pcc-cpufreq driver is loaded for that. Unfortunately, the firmware interface used by that driver is not scalable for fundamental reasons, so pcc-cpufreq is way suboptimal on systems with more than just a few CPUs. In fact, it is better to avoid using it at all. For this reason, modify intel_pstate to look for ACPI PCCH if _PSS is not present and register if it is there. Also prevent the pcc-cpufreq driver from trying to initialize itself if intel_pstate has been registered already. Fixes: fbbcdc0744da (intel_pstate: skip the driver if ACPI has power mgmt option) Reported-by: Andreas Herrmann <aherrmann@suse.com> Reviewed-by: Andreas Herrmann <aherrmann@suse.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Andreas Herrmann <aherrmann@suse.com> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* | | | | | | | Merge tag 'acpi-4.18-rc6' of ↵Linus Torvalds2018-07-201-1/+1
|\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Extend the recently added suspend-to-idle quirk for Thinkpad X1 Carbon 6th to other systems from that familiy which turned out to need it too (Robin Johnson)" * tag 'acpi-4.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems
| * | | | | | | | ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systemsRobin H. Johnson2018-07-191-1/+1
| |/ / / / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems beyond matched only a single DMI model (20KGS3JF01), that didn't cover my laptop (20KH002JUS). Change to match based on DMI product family to cover all X1 6th gen systems. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-02 23:35:13 +0100