summaryrefslogtreecommitdiffstats
path: root/drivers (follow)
Commit message (Collapse)AuthorAgeFilesLines
* lightnvm: introduce factory resetMatias Bjørling2016-01-122-0/+213
| | | | | | | | | | | | | | | | | | | | Now that a device can be managed using the system blocks, a method to reset the device is necessary as well. This patch introduces logic to reset the device easily to factory state and exposes it through an ioctl. The ioctl takes the following flags: NVM_FACTORY_ERASE_ONLY_USER By default all blocks, except host-reserved blocks are erased upon factory reset. Instead of this, only erase host-reserved blocks. NVM_FACTORY_RESET_HOST_BLKS Mark host-reserved blocks to be erased and set their type to free. NVM_FACTORY_RESET_GRWN_BBLKS Mark "grown bad blocks" to be erased and set their type to free. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: use system block for mm initializationMatias Bjørling2016-01-121-2/+23
| | | | | | | | | | | | | | Use system block information to register the appropriate media manager. This enables the LightNVM subsystem to instantiate a media manager selected by the user, instead of relying on automatic detection by each media manager loaded in the kernel. A device must now be initialized before it can proceed to initialize its media manager. Upon initialization, the configured media manager is automatically initialized as well. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: introduce ioctl to initialize deviceMatias Bjørling2016-01-121-0/+50
| | | | | | | | | | Based on the previous patch, we now introduce an ioctl to initialize the device using nvm_init_sysblock and create the necessary system blocks. The user may specify the media manager that they wish to instantiate on top. Default from user-space will be "gennvm". Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: core on-disk initializationMatias Bjørling2016-01-123-1/+564
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | An Open-Channel SSD shall be initialized before use. To initialize, we define an on-disk format, that keeps a small set of metadata to bring up the media manager on top of the device. The initial step is introduced to allow a user to format the disks for a given media manager. During format, a system block is stored on one to three separate luns on the device. Each lun has the system block duplicated. During initialization, the system block can be retrieved and the appropriate media manager can initialized. The on-disk format currently covers (struct nvm_system_block): - Magic value "NVMS". - Monotonic increasing sequence number. - The physical block erase count. - Version of the system block format. - Media manager type. - Media manager superblock physical address. The interface provides three functions to manage the system block: int nvm_init_sysblock(struct nvm_dev *, struct nvm_sb_info *) int nvm_get_sysblock(struct nvm *dev, struct nvm_sb_info *) int nvm_update_sysblock(struct nvm *dev, struct nvm_sb_info *) Each implement a part of the logic to manage the system block. The initialization creates the first system blocks and mark them on the device. Get retrieves the latest system block by scanning all pages in the associated system blocks. The update sysblock writes new metadata and allocates new block if necessary. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: introduce mlc lower page table mappingsMatias Bjørling2016-01-122-2/+81
| | | | | | | | | | | | | | | NAND MLC memories have both lower and upper pages. When programming, both of these must be written, before data can be read. However, these lower and upper pages might not placed at even and odd flash pages, but can be skipped. Therefore each flash memory has its lower pages defined, which can then be used when programming and to know when padding are necessary. This patch implements the lower page definition in the specification, and exposes it through a simple lookup table at dev->lptbl. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: add mccap supportMatias Bjørling2016-01-121-0/+1
| | | | | | | | | | Some flash media has extended capabilities, such as programming SLC pages on MLC/TLC flash, erase/program suspend, scramble and encryption. MCCAP is introduced to detect support for these capabilities in the command set. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: manage open and closed blocks separatelyJavier González2016-01-124-43/+120
| | | | | | | | | | | | | | | | | | | | | | LightNVM targets need to know the state of the flash block when doing flash optimizations. An example is implementing a write buffer to respect the flash page size. Currently, block state is not accounted for; the media manager only differentiates among free, bad and in-use blocks. This patch adds the logic in the generic media manager to enable targets manage blocks into open and close separately, and it implements such management in rrpc. It also adds a set of flags to describe the state of the block (open, closed, free, bad). In order to avoid taking two locks (nvm_lun and rrpc_lun) consecutively, we introduce lockless get_/put_block primitives so that the open and close list locks and future common logic is handled within the nvm_lun lock. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: reference rrpc lun in rrpc blockJavier González2016-01-122-0/+2
| | | | | | | | | | | | | | Currently, a rrpc block only points to its nvm_lun. If a user wants to find the associated rrpc lun, it will have to calculate the index and look it up manually. By referencing the rrpc lun directly, this step can be omitted, at the cost of a larger memory footprint. This is important for upcoming patches that implement write buffering in rrpc. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: introduce nvm_submit_ppaMatias Bjørling2016-01-121-1/+44
| | | | | | | | | | | | | Internal logic for both core and media managers, does not have a backing bio for issuing I/Os. Introduce nvm_submit_ppa to allow raw I/Os to be submitted to the underlying device driver. The function request the device, ppa, data buffer and its length and will submit the I/O synchronously to the device. The return value may therefore be used to detect any errors regarding the issued I/O. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: move rq->error to nvm_rq->errorMatias Bjørling2016-01-123-5/+6
| | | | | | | | Instead of passing request error into the LightNVM modules, incorporate it into the nvm_rq. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: support multiple ppas in nvm_erase_ppaMatias Bjørling2016-01-122-3/+3
| | | | | | | | Sometimes a user want to erase multiple PPAs at the same time. Extend nvm_erase_ppa to take multiple ppas and number of ppas to be erased. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: move the pages per block check out of the loopWenwei Tao2016-01-121-6/+5
| | | | | | | | | | There is no need to check whether dev's pages per block is beyond rrpc support every time we init a lun, we only need to check it once before enter the lun init loop. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: sectors first in ppa listMatias Bjørling2016-01-121-3/+3
| | | | | | | | | The Westlake controller requires that the PPA list has sectors defined sequentially. Currently, the PPA list is created with planes first, then sectors. Change this to sectors first, then planes. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: fix locking and mempool in rrpc_lun_gcWenwei Tao2016-01-121-6/+6
| | | | | | | | | | | | | | | | This patch fix two issues in rrpc_lun_gc 1. prio_list is protected by rrpc_lun's lock not nvm_lun's, so acquire rlun's lock instead of lun's before operate on the list. 2. we delete block from prio_list before allocating gcb, but gcb allocation may fail, we end without putting it back to the list, this makes the block won't get reclaimed in the future. To solve this issue, delete block after gcb allocation. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: put block back to gc list on its reclaim failWenwei Tao2016-01-121-4/+14
| | | | | | | | | | | We delete a block from the gc list before reclaim it, so put it back to the list on its reclaim fail, otherwise this block will not get reclaimed and be programmable in the future. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: check bi_error in gcWenwei Tao2016-01-121-0/+6
| | | | | | | | | We should check last io completion status before starting another one. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: return the get_bb_tbl return valueMatias Bjørling2016-01-121-5/+0
| | | | | | | | | | | | During get_bb_tbl, a callback is used to allow an user-specific scan function to be called. The callback may return an error, and in that case, the return value is overridden. However, the callback error is needed when the fault is a user error and not a kernel error. For example, when a user tries to initialize the same device twice. The get_bb_tbl callback should be able to communicate this. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: refactor end_io functions for syncMatias Bjørling2016-01-125-30/+34
| | | | | | | | | | | | | | | To implement sync I/O support within the LightNVM core, the end_io functions are refactored to take an end_io function pointer instead of testing for initialized media manager, followed by calling its end_io function. Sync I/O can then be implemented using a callback that signal I/O completion. This is similar to the logic found in blk_to_execute_io(). By implementing it this way, the underlying device I/Os submission logic is abstracted away from core, targets, and media managers. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: refactor rqd ppa list into set/freeMatias Bjørling2016-01-121-21/+50
| | | | | | | | | | A device may be driven in single, double or quad plane mode. In that case, the rqd must have either one, two, or four PPAs set for a single PPA sent to the device. Refactor this logic into their own functions to be shared by program/erase/read in the core. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: move ppa erase logic to coreMatias Bjørling2016-01-122-64/+71
| | | | | | | | | | | A device may function in single, dual or quad plane mode. The gennvm media manager manages this with explicit helpers. They convert a single ppa to 1, 2 or 4 separate ppas in a ppa list. To aid implementation of recovery and system blocks, this functionality can be moved directly into the core. Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: unlock rq and free ppa_list on submission failWenwei Tao2016-01-121-0/+6
| | | | | | | | | | | When rrpc_write_ppalist_rq and rrpc_read_ppalist_rq succeed, we setup rq correctly, but nvm_submit_io may afterward fail since it cannot allocate request or nvme_nvm_command, we return error but forget to cleanup the previous work. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: add check after mempool allocationJavier Gonzalez2016-01-121-0/+2
| | | | | | | | | The mempool allocation might fail. Make sure to return error when it does, instead of causing a kernel panic. Signed-off-by: Javier Gonzalez <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: fix incorrect nr_free_blocks statChao Yu2016-01-121-0/+1
| | | | | | | | | | | When initing bad block list in gennvm_block_bb, once we move bad block from free_list to bb_list, we should maintain both stat info nr_free_blocks and nr_bad_blocks. So this patch fixes to add missing operation related to nr_free_blocks. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* lightnvm: fix bio submission issueWenwei Tao2016-01-122-2/+4
| | | | | | | | | | | Put bio when submission fails, since we get it before submission. And return error when backend device driver doesn't provide a submit_io method, thus we can end IO properly. Signed-off-by: Wenwei Tao <ww.tao0320@gmail.com> Signed-off-by: Matias Bjørling <m@bjorling.me> Signed-off-by: Jens Axboe <axboe@fb.com>
* Merge tag 'drm-intel-fixes-2016-01-02' of ↵Linus Torvalds2016-01-032-5/+9
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://anongit.freedesktop.org/drm-intel Pull i915 drm fixes from Jani Nikula: "Two display fixes still for v4.4. The new year's resolution is to start using signed tags per Linus' request. This one is still unsigned; I want to fix this up in our maintainer scripts instead of doing it one-off" * tag 'drm-intel-fixes-2016-01-02' of git://anongit.freedesktop.org/drm-intel: drm/i915: increase the tries for HDMI hotplug live status checking drm/i915: Unbreak check_digital_port_conflicts()
| * drm/i915: increase the tries for HDMI hotplug live status checkingGary Wang2015-12-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The total delay of HDMI hotplug detecting with 30ms is sometimes not enoughtfor HDMI live status up with specific HDMI monitors in BSW platform. After doing experiments for following monitors, it needs 80ms at least for those worst cases. Lenovo L246 1xwA (4 failed, necessary hot-plug delay: 58/40/60/40ms) Philips HH2AP (9 failed, necessary hot-plug delay: 80/50/50/60/46/40/58/58/39ms) BENQ ET-0035-N (6 failed, necessary hot-plug delay: 60/50/50/80/80/40ms) DELL U2713HM (2 failed, necessary hot-plug delay: 58/59ms) HP HP-LP2475w (5 failed, necessary hot-plug delay: 70/50/40/60/40ms) It looks like 70-80 ms is BSW platform needs in some bad cases of the monitors at this end (8 times delay at most). Keep less than 100ms for HDCP pulse HPD low (with at least 100ms) to respond a plug out. Reviewed-by: Cooper Chiou <cooper.chiou@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Shobhit Kumar <shobhit.kumar@intel.com> Signed-off-by: Gary Wang <gary.c.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450858295-12804-1-git-send-email-gary.c.wang@intel.com Tested-by: Shobhit Kumar <shobhit.kumar@intel.com> Cc: drm-intel-fixes@lists.freedesktop.org Fixes: 237ed86c693d ("drm/i915: Check live status before reading edid") Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (cherry picked from commit f8d03ea0053b23de42c828d559016eabe0b91523) [Jani: undo the file mode change of the original commit] Signed-off-by: Jani Nikula <jani.nikula@intel.com>
| * drm/i915: Unbreak check_digital_port_conflicts()Ville Syrjälä2015-12-231-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Atomic changes broke check_digital_port_conflicts(). It needs to look at the global situation instead of just trying to find a conflict within the current atomic state. This bug made my HSW explode spectacularly after I had split the DDI encoders into separate DP and HDMI encoders. With the fix, things seem much more solid. I hope holding the connection_mutex is enough protection that we can actually walk the connectors even if they're not part of the current atomic state... v2: Regenerate the patch so that it actually applies (Jani) Cc: stable@vger.kernel.org Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Fixes: 5448a00d3f06 ("drm/i915: Don't use staged config in check_digital_port_conflicts()") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449764551-12466-1-git-send-email-ville.syrjala@linux.intel.com (cherry picked from commit 0bff4858653312a10c83709e0009c3adb87e6f1e) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
* | Merge tag 'pci-v4.4-fixes-3' of ↵Linus Torvalds2015-12-311-1/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI bugfix from Bjorn Helgaas: "Here's another fix for v4.4. This fixes 32-bit config reads for the HiSilicon driver. Obviously the driver is completely broken without this fix (apparently it actually was tested internally, but got broken somehow in the process of upstreaming it). Summary: HiSilicon host bridge driver Fix 32-bit config reads (Dongdong Liu)" * tag 'pci-v4.4-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: hisi: Fix hisi_pcie_cfg_read() 32-bit reads
| * | PCI: hisi: Fix hisi_pcie_cfg_read() 32-bit readsDongdong Liu2015-12-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For 32-bit config reads (size == 4), hisi_pcie_cfg_read() returned success but never filled in the data we read. Return the register data for 32-bit config reads. Without this fix, PCI doesn't work at all because enumeration depends on 32-bit config reads. The driver was tested internally, but got broken in the process of upstreaming, so this fixes the breakage. Fixes: 500a1d9a43e0 ("PCI: hisi: Add HiSilicon SoC Hip05 PCIe driver") Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Zhou Wang <wangzhou1@hisilicon.com>
* | | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2015-12-3118-107/+221
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Prevent XFRM per-cpu counter updates for one namespace from being applied to another namespace. Fix from DanS treetman. 2) Fix RCU de-reference in iwl_mvm_get_key_sta_id(), from Johannes Berg. 3) Remove ethernet header assumption in nft_do_chain_netdev(), from Pablo Neira Ayuso. 4) Fix cpsw PHY ident with multiple slaves and fixed-phy, from Pascal Speck. 5) Fix use after free in sixpack_close and mkiss_close. 6) Fix VXLAN fw assertion on bnx2x, from Yuval Mintz. 7) natsemi doesn't check for DMA mapping errors, from Alexey Khoroshilov. 8) Fix inverted test in ip6addrlbl_get(), from ANdrey Ryabinin. 9) Missing initialization of needed_headroom in geneve tunnel driver, from Paolo Abeni. 10) Fix conntrack template leak in openvswitch, from Joe Stringer. 11) Mission initialization of wq->flags in sock_alloc_inode(), from Nicolai Stange. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) sctp: sctp should release assoc when sctp_make_abort_user return NULL in sctp_close net, socket, socket_wq: fix missing initialization of flags drivers: net: cpsw: fix error return code openvswitch: Fix template leak in error cases. sctp: label accepted/peeled off sockets sctp: use GFP_USER for user-controlled kmalloc qlcnic: fix a loop exit condition better net: cdc_ncm: avoid changing RX/TX buffers on MTU changes geneve: initialize needed_headroom ipv6: honor ifindex in case we receive ll addresses in router advertisements addrconf: always initialize sysctl table data ipv6/addrlabel: fix ip6addrlbl_get() switchdev: bridge: Pass ageing time as clock_t instead of jiffies sh_eth: fix 16-bit descriptor field access endianness too veth: don’t modify ip_summed; doing so treats packets with bad checksums as good. net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband Card net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband Card natsemi: add checks for dma mapping errors rhashtable: Kill harmless RCU warning in rhashtable_walk_init openvswitch: correct encoding of set tunnel action attributes ...
| * \ \ Merge tag 'wireless-drivers-for-davem-2015-12-28' of ↵David S. Miller2015-12-302-20/+44
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== iwlwifi * don't load firmware that won't exist for 7260 * fix RCU splat ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * \ \ Merge tag 'iwlwifi-for-kalle-2015-12-16' of ↵Kalle Valo2015-12-182-20/+44
| | |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes * don't load firmware that won't exist for 7260 * fix RCU splat
| | | * | | iwlwifi: mvm: protect RCU dereference in iwl_mvm_get_key_sta_idJohannes Berg2015-12-131-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Properly protect the RCU dereference in iwl_mvm_get_key_sta_id() when coming from iwl_mvm_update_tkip_key() which cannot hold the mvm->mutex by moving the call into the RCU critical section. Modify the check to use rcu_dereference_check() to permit this. Fixes: 9513c5e18a0d ("iwlwifi: mvm: Avoid dereferencing sta if it was already flushed") Reported-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| | | * | | iwlwifi: separate firmware version for 7260 devicesJohannes Berg2015-12-131-14/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 7260 devices aren't going to be updated for completely new firmware versions any more (only bugfixes), and haven't been since API version 17. Encode that in the data structures to avoid trying to load FW images that will never exist. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
| * | | | | drivers: net: cpsw: fix error return codeJulia Lawall2015-12-291-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Propagate the return value of platform_get_irq on failure. A simplified version of the semantic match that finds the two cases where no error code is returned at all is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | qlcnic: fix a loop exit condition betterDan Carpenter2015-12-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the original code, if we succeeded on the last iteration through the loop then we still returned failure. Fixes: 389e4e04ad2d ('qlcnic: fix a timeout loop') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net: cdc_ncm: avoid changing RX/TX buffers on MTU changesBjørn Mork2015-12-242-1/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NCM buffer sizes are negotiated with the device independently of the network device MTU. The RX buffers are allocated by the usbnet framework based on the rx_urb_size value set by cdc_ncm. A single RX buffer can hold a number of MTU sized packets. The default usbnet change_mtu ndo only modifies rx_urb_size if it is equal to hard_mtu. And the cdc_ncm driver will set rx_urb_size and hard_mtu independently of each other, based on dwNtbInMaxSize and dwNtbOutMaxSize respectively. It was therefore assumed that usbnet_change_mtu() would never touch rx_urb_size. This failed to consider the case where dwNtbInMaxSize and dwNtbOutMaxSize happens to be equal. Fix by implementing an NCM specific change_mtu ndo, modifying the netdev MTU without touching the buffer size settings. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | geneve: initialize needed_headroomPaolo Abeni2015-12-241-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the needed_headroom field for the geneve device is left to the default value. This patch set it to space required for basic geneve encapsulation, so that we can avoid the skb head re-allocation on xmit. This give a 6% speedup for unsegment traffic on geneve tunnel. v1 -> v2: - add ETH_HLEN for the lower device to the needed headroom Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | sh_eth: fix 16-bit descriptor field access endianness tooSergei Shtylyov2015-12-222-28/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1299653affa4 ("sh_eth: fix descriptor access endianness") only addressed the 32-bit buffer address field byte-swapping but the driver still accesses 16-bit frame/buffer length descriptor fields without the necessary byte-swapping -- which should affect the big-endian kernels. In order to be able to use {cpu|edmac}_to_{edmac|cpu}(), we need to declare the RX/TX descriptor word 1 as a 32-bit field and use shifts/masking to access the 16-bit subfields (which gets rid of the ugly #ifdef'ery too)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | veth: don’t modify ip_summed; doing so treats packets with bad checksums ↵Vijay Pandurangan2015-12-221-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | as good. Packets that arrive from real hardware devices have ip_summed == CHECKSUM_UNNECESSARY if the hardware verified the checksums, or CHECKSUM_NONE if the packet is bad or it was unable to verify it. The current version of veth will replace CHECKSUM_NONE with CHECKSUM_UNNECESSARY, which causes corrupt packets routed from hardware to a veth device to be delivered to the application. This caused applications at Twitter to receive corrupt data when network hardware was corrupting packets. We believe this was added as an optimization to skip computing and verifying checksums for communication between containers. However, locally generated packets have ip_summed == CHECKSUM_PARTIAL, so the code as written does nothing for them. As far as we can tell, after removing this code, these packets are transmitted from one stack to another unmodified (tcpdump shows invalid checksums on both sides, as expected), and they are delivered correctly to applications. We didn’t test every possible network configuration, but we tried a few common ones such as bridging containers, using NAT between the host and a container, and routing from hardware devices to containers. We have effectively deployed this in production at Twitter (by disabling RX checksum offloading on veth devices). This code dates back to the first version of the driver, commit <e314dbdc1c0dc6a548ecf> ("[NET]: Virtual ethernet device driver"), so I suspect this bug occurred mostly because the driver API has evolved significantly since then. Commit <0b7967503dc97864f283a> ("net/veth: Fix packet checksumming") (in December 2010) fixed this for packets that get created locally and sent to hardware devices, by not changing CHECKSUM_PARTIAL. However, the same issue still occurs for packets coming in from hardware devices. Co-authored-by: Evan Jones <ej@evanjones.ca> Signed-off-by: Evan Jones <ej@evanjones.ca> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: Phil Sutter <phil@nwl.cc> Cc: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Vijay Pandurangan <vijayp@vijayp.ca> Acked-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net: usb: cdc_ncm: Adding Dell DW5813 LTE AT&T Mobile Broadband CardDaniele Palmas2015-12-211-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unlike DW5550, Dell DW5813 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net: usb: cdc_ncm: Adding Dell DW5812 LTE Verizon Mobile Broadband CardDaniele Palmas2015-12-211-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Unlike DW5550, Dell DW5812 is a mobile broadband card with no ARP capabilities: the patch makes this device to use wwan_noarp_info struct Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | natsemi: add checks for dma mapping errorsAlexey Khoroshilov2015-12-191-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | refill_rx() and start_tx() do not check if mapping dma memory succeed. The patch adds the checks and failure handling. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | bnx2x: Prevent FW assertion when using VxlanYuval Mintz2015-12-181-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FW has a rare corner case in which a fragmented packet using lots of frags would not be linearized, causing the FW to assert while trying to transmit the packet. To prevent this, we need to make sure the window of fragements containing MSS worth of data contains 1 BD less than for regular packets due to the additional parsing BD. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | mkiss: Fix use after free in mkiss_close().David Miller2015-12-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Need to do the unregister_device() after all references to the driver private have been done. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | 6pack: Fix use after free in sixpack_close().David Miller2015-12-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Need to do the unregister_device() after all references to the driver private have been done. Also we need to use del_timer_sync() for the timers so that we don't have any asynchronous references after the unregister. Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | be2net: Avoid accessing eq object in be_msix_register routine, when i < 0.Venkat Duvvuru2015-12-181-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the first request_irq fails in be_msix_register, i value would be zero. The current code decrements the i value and accesses the eq object without validating the decremented "i" value. This can cause an "invalid memory address access" violation. This patch fixes the problem by accessing the eq object after validating the "i" value. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@avagotech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net/mlx4_en: Fix HW timestamp init issue upon system startupEugenia Emantayev2015-12-183-7/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mlx4_en_init_timestamp was called before creation of netdev and port init, thus used uninitialized values. Specifically - NIC frequency was incorrect causing wrong calculations and later wrong HW timestamps. Fixes: 1ec4864b1017 ('net/mlx4_en: Fixed crash when port type is changed') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Marina Varshaver <marinav@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | net/mlx4_en: Remove dependency between timestamping capability and service_taskEugenia Emantayev2015-12-181-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Service task is responsible for other tasks in addition to timestamping overflow check. Launch it even if timestamping is not supported by device. Fixes: 07841f9d94c1 ('net/mlx4_en: Schedule napi when RX buffers allocation fails') Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * | | | | drivers: net: cpsw: increment reference count on fixed-link PHY nodeDavid Rivshin2015-12-181-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a fixed-link sub-node exists in a slave node, the slave node is also the PHY node. Since this is a separate use of the slave node, of_node_get() should be used to increment the reference count. Fixes: 1f71e8c96fc6 ("drivers: net: cpsw: Add support for fixed-link PHY") Signed-off-by: David Rivshin <drivshin@allworx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-18 01:46:53 +0100